summaryrefslogtreecommitdiffstats
path: root/drivers/iio
AgeCommit message (Collapse)AuthorFilesLines
2013-08-19iio: adjd_s311: Fix non-scan mode data readPeter Meerwald1-1/+2
forgot to convert channel index to data register Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-07-21iio: ti_am335x_adc: Fix wrong samples received on 1st readPatil, Rachna1-8/+22
Previously we tried to read data form ADC even before ADC sequencer finished sampling. This led to wrong samples. We now wait on ADC status register idle bit to be set. Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Zubair Lutfullah <zubair.lutfullah@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-07-20iio:trigger: Fix use_count race conditionLars-Peter Clausen1-12/+22
When using more than one trigger consumer it can happen that multiple threads perform a read-modify-update cycle on 'use_count' concurrently. This can cause updates to be lost and use_count can get stuck at non-zero value, in which case the IIO core assumes that at least one thread is still running and will wait for it to finish before running any trigger handlers again. This effectively renders the trigger disabled and a reboot is necessary before it can be used again. To fix this make use_count an atomic variable. Also set it to the number of consumers before starting the first consumer, otherwise it might happen that use_count drops to 0 even though not all consumers have been run yet. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-07-16Merge tag 'iio-fixes-for-3.11a' of ↵Greg Kroah-Hartman5-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: The first round of IIO fixes for the 3.11 cycle. This set is larger than I would like, partly due to my lack of review time in the weeks before the merge window and partly because a couple of large drivers and the subsystem as a whole seem to be getting a lot more exposure and testing recently. 1) A long term bug in trigger handling gave a double free of the device. 2) Wrong return value handling means offsets are ignored in iio_convert_raw_to_processed_unlocked. 3) The iio_channel_has_info utility function was incorrectly updated during the recent info_mask split, this is now fixed. 4) mxs-lradc has a couple of little fixes. 5) A couple of missing .driver_module entries meant that drivers could be removed from underneath their users. 6) Error path fixes for ad7303 and lis3l02dq. 7) The scale value for presure in the lps331ap driver was out by a factor of 100.
2013-07-16iio: lps331ap: Fix wrong in_pressure_scale output valueJacek Anaszewski1-2/+4
This patch fixes improper in_pressure_scale output that is returned by the lps331ap barometer sensor driver. According to the documentation the pressure after applying the scale has to be expressed in kilopascal units. With erroneous implementation the scale value larger by two orders of magnitude is returned - 2441410 instead of 24414. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-07-10Merge tag 'mfd-3.11-1' of ↵Linus Torvalds1-32/+100
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next Pull MFD update from Samuel Ortiz: "For the 3.11 merge we only have one new MFD driver for the Kontron PLD. But we also have: - Support for the TPS659038 PMIC from the palmas driver. - Intel's Coleto Creek and Avoton SoCs support from the lpc_ich driver. - RTL8411B support from the rtsx driver. - More DT support for the Arizona, max8998, twl4030-power and the ti_am335x_tsadc drivers. - The SSBI driver move under MFD. - A conversion to the devm_* API for most of the MFD drivers. - The twl4030-power got split from twl-core into its own module. - A major ti_am335x_adc cleanup, leading to a proper DT support. - Our regular arizona and wm* updates and cleanups from the Wolfson folks. - A better error handling and initialization, and a regulator subdevice addition for the 88pm80x driver. - A bulk platform_set_drvdata() call removal that's no longer need since commit 0998d0631001 ("device-core: Ensure drvdata = NULL when no driver is bound") * tag 'mfd-3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (102 commits) mfd: sec: Provide max_register to regmap mfd: wm8994: Remove duplicate check for active JACKDET MAINTAINERS: Add include directory to MFD file patterns mfd: sec: Remove fields not used since regmap conversion watchdog: Kontron PLD watchdog timer driver mfd: max8998: Add support for Device Tree regulator: max8998: Use arrays for specifying voltages in platform data mfd: max8998: Add irq domain support regulator: palmas: Add TPS659038 support mfd: Kontron PLD mfd driver mfd: palmas: Add TPS659038 PMIC support mfd: palmas: Add SMPS10_BOOST feature mfd: palmas: Check if irq is valid mfd: lpc_ich: iTCO_wdt patch for Intel Coleto Creek DeviceIDs mfd: twl-core: Change TWL6025 references to TWL6032 mfd: davinci_voicecodec: Fix build breakage mfd: vexpress: Make the driver optional for arm and arm64 mfd: htc-egpio: Use devm_ioremap_nocache() instead of ioremap_nocache() mfd: davinci_voicecodec: Convert to use devm_* APIs mfd: twl4030-power: Fix relocking on error ...
2013-07-06iio: ti_am335x_adc: add missing .driver_module to struct iio_infoWei Yongjun1-0/+1
Add missing .driver_module of struct iio_info. This prevents the module from being removed from underneath its users. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-07-03iio: inkern: fix iio_convert_raw_to_processed_unlockedAlexandre Belloni1-1/+1
When reading IIO_CHAN_INFO_OFFSET, the return value of iio_channel_read() for success will be IIO_VAL*, checking for 0 is not correct. Without this fix the offset applied by iio drivers will be ignored when converting a raw value to one in appropriate base units (e.g mV) in a IIO client drivers that use iio_convert_raw_to_processed including iio-hwmon. Cc: <stable@vger.kernel.org> # 3.10.x Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-29iio:trigger: device_unregister->device_del to avoid double freeJonathan Cameron1-1/+1
iio_trigger unregistration and freeing has been separated in this code for some time, but it looks like the calls to the device handling were not appropriately updated. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reported-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2013-06-29iio: dac: ad7303: fix error return code in ad7303_probe()Wei Yongjun1-1/+3
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-13Merge tag 'am335x_tsc-adc' of git://breakpoint.cc/bigeasy/linuxSamuel Ortiz1-32/+100
A complete refurbished series inclunding: - DT support for the MFD, TSC and ADC driver & platform device support, which has no users, has been killed. - iio_map from last series is gone and replaced by proper nodes in the device tree. - suspend fixes which means correct data structs are taken and no interrupt storm - fifo split which should problem with TSC & ADC beeing used at the same time - The ADC channels are now checked before blindly applied. That means the touch part reads X, Y and Z coordinates and does not mix them up. Same goes for the IIO ADC driver. - The IIO ADC driver now creates files named in_voltageX_raw where X represents the ADC line instead of a number starting at 0. A read from this file can return -EBUSY in case touch is busy and the ADC didn't collect a value.
2013-06-12iio: ti_am335x_adc: check if we found the valueSebastian Andrzej Siewior1-2/+6
Usually we get all the values we wanted but it is possible, that te ADC unit is busy performing the conversation for the HW events. In that case -EBUSY is returned and the user may re-call the function. Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2013-06-12iio: ti_am335x_adc: Allow to specify input lineSebastian Andrzej Siewior1-20/+37
The TSC part allows to specify the input lines. The IIO part assumes that it usues always the last few, that means if IIO has adc-channels set to 2 it will use channel 6 and 7. However it might make sense to use only 6. This patch changes the device property (which was introduced recently and was never in an official release) in a way that the user can specify which of the AIN lines should be used. In Addition to this, the name is now AINx where x is the channel number i.e. for AIN6 we would have 6. Prior this, it always started counting at 0 which is confusing. In addition to this, it also checks for correct step number during reading and does not rely on proper FIFO depth. Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2013-06-12input: ti_am335x_adc: use only FIFO0 and clean up a littleSebastian Andrzej Siewior1-1/+1
The driver programs a threshold of "coordinate_readouts" say 5. The REG_FIFO0THR registers says it should it be programmed to "threshold minus one". The driver does not expect just 5 coordinates but 5 * 2 + 2. Multiplied by two because 5 for X and 5 for Y and plus 2 because we have two Z. The whole thing kind of works because It reads the 5 coordinates for X and Y from FIFO0 and FIFO1 and the last element in each FIFO is ignored within the loop and read later. Nothing guaranties that FIFO1 is ready by the time it is read. In fact I could see that that FIFO1 reaturns for Y channels 8,9, 10, 12, 6 and for Y channel 7 for Z. The problem is that channel 7 and channel 12 got somehow mixed up. The other Problem is that FIFO1 is also used by the IIO part leading to wrong results if both (tsc & adc) are used. The patch tries to clean up the whole thing a little: - Remove the +1 and -1 in REG_STEPCONFIG, REG_STEPDELAY and its counter part in the for loop. This is just confusing. - Use only FIFO0 in TSC. The fifo has space for 64 entries so should be fine. - Read the whole FIFO in one function and check the channel. - in case we dawdle around, make sure we only read a multiple of our coordinate set. On the second interrupt we will cleanup the remaining enties. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2013-06-12mfd: iio: ti_am335x_adc: rename device from tiadc to TI-am335x-adcSebastian Andrzej Siewior1-2/+1
TI-adc reads a little better compared to tiadc. And if we add am335x to it then we have the same naming scheme as the tsc side. Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2013-06-12iio: ti_tscadc: provide datasheet_name and scan_typePantelis Antoniou1-5/+24
This patch provides the members "datasheet_name" and scan_type. This is the remaining part of the earlier patch where I (bigeasy) removed iio_map because it is now supplied by the device tree. It also static names as suggested by Jonathan. Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2013-06-12iio: ti_am335x_adc: remove platform_data supportSebastian Andrzej Siewior1-14/+7
This patch removes access to platform data mfd_tscadc_board because the platform is DT only. Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2013-06-12iio: ti_am335x_adc: Add DT supportPatil, Rachna1-5/+24
Add DT support for client ADC driver. Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2013-06-12input: ti_am33x_tsc: Step enable bits made configurablePatil, Rachna1-2/+18
Current code has hard coded value written to step enable bits. Now the bits are updated based on how many steps are needed to be configured got from platform data. The user needs to take care not to exceed the count more than 16. While using ADC and TSC one should take care to set this parameter correctly. Sebastian added the common lock and moved the code, that manipulates the steps, from into the mfd module. Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2013-06-12mfd: input: iio: ti_am335x_adc: use one structure for ti_tscadc_devSebastian Andrzej Siewior1-2/+3
The mfd driver creates platform data for the child devices and it is the ti_tscadc_dev struct. This struct is copied for the two devices. The copy of the structure makes a common lock in this structure a little less usefull. Therefore the platform data is not a pointer to the structure and the same structure is used. While doing the change I noticed that the suspend/resume code assumes the wrong pointer for ti_tscadc_dev and this has been fixed as well. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2013-06-11staging:iio:adis16130: Move out of stagingLars-Peter Clausen3-0/+215
The adis16130 driver is fairly simple and it a good shape now, so move it out of staging. Remove an outdated FIXME along the way. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-11iio:dac: Add support for the AD7303Lars-Peter Clausen3-0/+326
This patch adds support for the AD7303. The AD7303 is a simple 2 channel 8 bit DAC with an SPI interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-09iio: frequency: adf4350: Add support for dt bindingsMichael Hennerich1-1/+127
Per review feedback from Lars-Peter Clausen <lars@metafoo.de> Changes since V1: Fix return value handling of adf4350_parse_dt() Use of_get_gpio Avoid abbreviations in devicetree properties Fix typo in docs Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-09iio: frequency: adf4350: Add support for clock consumer frameworkMichael Hennerich1-9/+49
Preferably get clkin (PLL reference clock) from clock framework Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-08Merge 3.10-rc5 into staging-nextGreg Kroah-Hartman3-4/+7
2013-06-08iio:trigger:interrupt fix formatting of rsize variable in nameJonathan Cameron1-1/+1
The name includes irq_res->start which of type resource_size_t not integer. We could in theory use %pa for this but then it would be in hex and also that causes a warning about incorrect types anyway. Hence just use the irq local variable we assigned the line above. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-05iio:pressure: Add STMicroelectronics pressures driverDenis CIOCCA9-0/+616
This patch adds a generic pressure driver for STMicroelectronics pressure sensors, currently it supports: LPS331AP. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-05iio:common: Removed stuff macros, added num_data_channels on st_sensors ↵Denis CIOCCA5-31/+73
struct and added support on one-shot sysfs reads to 3 byte channel This patch introduce num_data_channels variable on st_sensors struct to manage different type of channels (size or number) in st_sensors_get_buffer_element function. Removed ST_SENSORS_NUMBER_DATA_CHANNELS and ST_SENSORS_BYTE_FOR_CHANNEL and used struct iio_chan_spec const *ch to catch data. Added 3 byte channel data support on one-shot reads. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-04iio:common: ST_SENSORS_LSM_CHANNELS macro changedDenis CIOCCA3-33/+60
Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-04iio:inkern: Fix typo/bug in convert raw to processed.Michael Hennerich1-1/+1
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-04iio: frequency: ad4350: Fix bug / typo in maskMichael Hennerich1-1/+1
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-04iio:triggers:interrupt trigger - move out of staging.Jonathan Cameron3-0/+131
This is now a very simple trigger indeed but useful in many common cases. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2013-06-04iio: at91_adc: Add missing CONFIG_OF macroSachin Kamat1-0/+2
The data structure is required only when DT is enabled. Hence compile it conditionally. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-04iio: replace strict_strtoul() with kstrtoul()Jingoo Han2-3/+3
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-04inkern: iio_device_put after incorrect return/gotoJoe Perches1-1/+1
The code uses return foo; goto err_type; when instead the form should have been ret = foo; goto err_type; Here this causes a useful iio_device_put to be skipped. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-04iio:callback buffer: free the scan_maskJonathan Cameron1-1/+4
Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-05-27Merge 3.10-rc3 into staging-nextGreg Kroah-Hartman3-7/+9
We want the changes here, and we resolve the merge conflict that was happening in the nvec_kbd.c file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-22adc: exynos_adc: Convert to devm_ioremap_resource()Sachin Kamat1-6/+6
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-05-22iio: Correct HID light sensor name in commentsAlexandre Relange1-1/+1
The original driver was pasted from accelerometer driver, but the name of the ID was not changed. This patch fixes this comment. Signed-off-by: Alexandre Relange <alexandre@relange.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-05-22iio: STMicroelectronics: remove three useless selectsPaul Bolle3-3/+0
Drivers for STMicroelectronics accelerometers, gyroscopes, and magnetometers were added in v3.9. They all have a (similar) select statement in their Kconfig files for a non-existant Kconfig symbol. These select statements can safely be removed. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-05-22iio:ak8975 Implement data ready interrupt handlingJacek Anaszewski1-2/+89
Implement "data ready" interrupt handling in addition to the two existing read modes - DRDY GPIO polling and ST1 register DRDY bit polling. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-05-22iio:ak8975 Add support for gpios DT propertyJacek Anaszewski1-3/+9
Add support for parsing 'gpios' property when initializing from oftree. This patch adds also the binding documentation file. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-05-22iio:trigger:sysfs Move out of staging.Jonathan Cameron5-0/+253
This simple driver is rather useful. No issues about its interface have been raised for some time hence the proposal to move it out of staging. Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-05-22iio: buffer: cleanup messages in iio_update_buffers()Michał Mirosław1-6/+4
1. make messages grepable (in one line) 2. include returned errno in them Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-05-22iio: adc: add driver for MCP3204/08 12-bit ADCOskar Andero3-0/+268
This adds support for Microchip's 12 bit AD converters MCP3204 and MCP3208. These chips communicates over SPI and supports single-ended and pseudo-differential configurations. Signed-off-by: Oskar Andero <oskar.andero@gmail.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-05-22iio: exynos_adc: fix wrong structure extration in suspend and resumeNaveen Krishna Chatradhi1-4/+4
The exynos_adc device structure was wrongly extracted from the dev* correcting the same. Using the regular conversion of struct device* -> struct platform_device* -> struct exynos_adc* seems wrong. Instead we should be doing struct device* -> struct iio_dev* -> struct exynos_adc* Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-05-22iio:common:st: added disable function after read info raw dataDenis CIOCCA1-0/+2
Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-05-22iio: dac: Fix build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=mAxel Lin1-3/+3
This patch fixes below build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m: drivers/built-in.o: In function `ad5064_i2c_write': drivers/iio/dac/ad5064.c:608: undefined reference to `i2c_master_send' drivers/built-in.o: In function `ad5064_i2c_register_driver': drivers/iio/dac/ad5064.c:646: undefined reference to `i2c_register_driver' drivers/built-in.o: In function `ad5064_i2c_unregister_driver': drivers/iio/dac/ad5064.c:651: undefined reference to `i2c_del_driver' make: *** [vmlinux] Error 1 When CONFIG_I2C=m, meaning we can't build the drivers in with I2C support. Thus don't allow the drivers to be compiled as built-in when CONFIG_I2C=m. The real fix though is to break the driver apart into a SPI part, an I2C part and a common part. But that's something for 3.11 while this is something for 3.10/stable. Reported-by: Wu Fengguang <fengguang.wu@intel.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-04-02iio: at91_adc: fix missing Sample and Hold timeJean-Christophe PLAGNIOL-VILLARD1-1/+14
On the at91_adc a minimal Sample and Hold Time is necessary for the ADC to guarantee the best converted final value between two channels selection. This time has to be programmed through the bitfield SHTIM in the Mode Register ADC_MR. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-04-02iio: at91_adc: add sleep mode supportJean-Christophe PLAGNIOL-VILLARD1-9/+10
The sleep mode will allow to put the adc in sleep between conversion. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>