summaryrefslogtreecommitdiffstats
path: root/drivers/iio/humidity/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2016-10-23iio: humidity: hdc100x: add triggered buffer support for HDC100XAlison Schofield1-0/+2
Triggered buffer support uses the HDC100X's dual acquisition mode to read both humidity and temperature in one shot. This patch depends on 447136effbf4 ("iio: humidity: hdc100x: fix sensor data reads of temp and humidity") Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23iio: humidity: add support to hts221 rh/temp combo deviceLorenzo Bianconi1-0/+22
Add support to STM HTS221 humidity + temperature sensor http://www.st.com/resource/en/datasheet/hts221.pdf - continuous mode support - i2c support - spi support - trigger mode support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-05Merge 4.8-rc5 into staging-nextGreg Kroah-Hartman1-0/+2
We want the staging fixes in here as well to handle merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-15iio: humidity: hdc100x: add HDC1000 and HDC1008 to KconfigAlison Schofield1-4/+4
hdc100x supports Texas Instruments HDC1000 and HDC1008 relative humidity and temperature sensors. Add these product names to Kconfig. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-15iio: add Kconfig selects needed for triggered buffer compilesAlison Schofield1-0/+2
Select IIO_BUFFER and IIO_TRIGGERED_BUFFER to compile. Remove IIO_TRIGGER if present since IIO_BUFFER selects it. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-24iio: humidity: Add support for AM2315Tiberiu Breana1-0/+10
Add basic support for the Aosong AM2315 relative humidity and ambient temperature sensor. Includes support for raw readings and ACPI detection. Datasheet: http://www.aosong.com/asp_bin/Products/en/AM2315.pdf Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30iio: si7020: add support for Hoperf th06Cristina Moraru1-1/+2
This patch adds support for Hoperf th06 humidity and temperature sensor as it uses same register definitions as si7020 th06 Datasheet: http://www.hoperf.com/upload/sensor/TH06.pdf Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30iio: si7005: add support for Hoperf th02Cristina Moraru1-1/+2
This patch adds support for Hoperf th02 humidity and temperature sensor as it uses same register definitions as si7005 th02 Datasheet: http://www.anglia-live.com/netalogue/pdfs/hrf/datasheets/TH02_V1.1.pdf Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-11Add ms8607 meas-spec driver supportLudovic Tancerel1-0/+2
Support for MS8607 temperature, pressure & humidity sensor. This part is using functions from MS5637 for temperature and pressure and HTU21 for humidity Signed-off-by: Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-11Add htu21 meas-spec driver supportLudovic Tancerel1-0/+11
Support for HTU21 temperature & humidity sensor Signed-off-by: Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: humidity: add HDC100x supportMatt Ranostay1-0/+10
Add support for the HDC100x temperature and humidity sensors including the resistive heater element. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-10iio: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven1-1/+1
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-04IIO: add si7020 driverDavid Barksdale1-0/+10
This patch adds support to the Industrial IO subsystem for the Silicon Labs Si7013/20/21 Relative Humidity and Temperature Sensors. Website: http://www.silabs.com/products/sensors/humidity-sensors/Pages/si7013-20-21.aspx These are i2c devices which measure relative humidity and temperature and all use the same protocol. The Si7013 has an additional input with programmable linearization which is not supported because that's complicated and I didn't need it. Signed-off-by: David Barksdale <dbarksdale@uplogix.com> -- Changes since v1: * Renamed to si7020 and replaced Si701x/2x with Si7013/20/21. * Removed unneeded mutex. * Pre-computed floating-point constant expressions. * Removed address_list and I2C_CLASS_HWMON. Changes since v2: * Return correct raw sensor values. * Rename dev variable to indio_dev. * Issue a software reset command during probe. * Un-broke string literal. Changes since v3: * enum changed to #define Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-01-11iio: Add si7005 relative humidity and temperature sensor driverPeter Meerwald1-0/+10
sensor provides 12-bit relative humidity and 14-bit temperature via I2C interface; temperature and linearity compensation is not implemented (yet) driver also supports the Si7015, but not the 2nd generation sensors Si7013/Si7020/Si7021 datasheet is here http://www.silabs.com/Support%20Documents/TechnicalDocs/Si7005.pdf v2: (thanks to Lars-Peter Clausen) * fix coding style * use devm_iio_device_register() * change copyright year to 2014 Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-12-03iio: Add new driver dht11Harald Geyer1-0/+15
This driver handles DHT11 and DHT22 sensors. Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>