summaryrefslogtreecommitdiffstats
path: root/drivers/iio/adc
AgeCommit message (Collapse)AuthorFilesLines
2016-01-16iio: adc: mcp320x: support more differential voltage measurementAkinobu Mita1-12/+19
mcp320x driver supports the pseudo-differential mode by in_voltage'IN+'-voltage'IN-'_raw where (IN+, IN-) = (0, 1), (2, 3), ... mcp320x chips except MCP3X01 can also select swapped IN+ and IN- pairs in the pseudo-differential mode. i.e. in_voltage'IN+'-voltage'IN-'_raw where (IN+, IN-) = (1, 0), (3, 2), ... If the voltage level of IN+ is equal to or less than IN-, the resultant code will be 000h. So it is useful to provide these, too. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Oskar Andero <oskar.andero@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: linux-iio@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-16MAINTAINERS: add entry for Atmel SAMA5D2 ADC driverLudovic Desroches1-2/+1
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-16iio:adc:at91_adc8xx: introduce new atmel adc driverLudovic Desroches3-0/+521
This driver supports the new version of the Atmel ADC device introduced with the SAMA5D2 SoC family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-04iio: add HAS_IOMEM dependency to VF610_ADCVegard Nossum1-0/+1
Ran into this on UML: drivers/built-in.o: In function `vf610_adc_probe': drivers/iio/adc/vf610_adc.c:744: undefined reference to `devm_ioremap_resource' devm_ioremap_resource() is defined only when HAS_IOMEM is selected. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-02iio: adc: mcp3422: Add support for MCP3425Akinobu Mita2-5/+8
The MCP3425 is a single channel up to 16-bit A/D converter which has features: - On-Board Programmable Gain Amplifier (PGA): - Gains of 1, 2, 4 or 8 - Programmable Data Rate Options: - 15 SPS (16 bits), 60 SPS (14 bits), 240 SPS (12 bits) The mcp3422 driver also supports the MCP3421 which is a single channel. So we can support MCP3425 with a little changes to mcp3422 driver. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: linux-iio@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-26Merge tag 'iio-for-4.5c' of ↵Greg Kroah-Hartman1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Third set of new stuff for IIO in the 4.5 cycle. New driver features - us5182 * Add interrupt support and rising / falling threshold events. Cleanups / fixes to new stuff / minor additions * Expose the IIO value formatting function for drivers to make use of internally. - ina2xx * Fix wrong channel order * Fix incorrect reporting of endianness * Adding documentation of ABI unique to this device - mma8452 * Drop an unused register description * Use an enum for the channel index to aid readability - sca3000 * Use standard NULL comparison style - us5182 * fix an inconsistency in status of enable (a bug with no real effect until above patches are applied) * refactor the read_raw function to improve maintainability / readability.
2015-12-26Merge tag 'iio-for-4.5b' of ↵Greg Kroah-Hartman6-4/+1399
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of IIO new drivers, functionality and cleanups for the 4.5 cycle. The big one here is the configfs support which has been a long time in the works but should allow for cleaner ways to do instantiation of those elements of IIO that aren't directly connected to specific hardware. Lots of cool new stuff we can use this for in the works! New core stuff (basically all configfs support related) * Configfs support - Core support (was waiting for a configfs patch that went in around 4.4rc2) - A little fixlet to add a configfs.h to contain a reference to the configfs_subsystem structure. * Some infrastructure to simplify handling of software based triggers (i.e. ones with no actual hardware associated with them) * A high resolution timer based trigger. This has been around for years but until the configfs support was ready we didn't have a sensible way of instantiating instances of it (the method used for the sysfs_trigger has never been really satisfactory) New Device Support * AMS iAQ Volatile Organic Compounds sensor support. * Freescale imx7d ADC driver * Maxim MAX30100 oximeter driver (note that for these devices most of the smart stuff will be in userspace - effectively they are just light sensors with some interesting led synchronization as far as the kernel is concerned). * Microchip mcp3421 support added to the mcp3422 driver. * TI adc124s021 support added to the adc128s052 driver. * TI ina219, inda226 power monitors. Note that there is an existing hwmon driver for these parts, the usecase is somewhat different so it is unclear at this point if the hwmon driver will eventually be replaced by a bridge from this driver. In the meantime the Kconfig dependencies should prevent both from being built. New driver functionality * us8152d power management support. Cleanups, fixups * Use list_for_each_entry_safe instead of list_for_each_safe with the entry bit coded longhand. * Select IRQ_WORK for IIO_DUMMY_EVGEN. This is a fix that somehow got lost when the driver was moved so lets do it again. * st-accel - drop an unused define. * vz89x, lidar - optimize i2c transactions by using a single i2c tranfers instead of multiple calls where supported (fall back to smbus calls as before if not). * Use dev_get_platdata() in staging drivers: tsl2x7x, adcs and frequency drivers instead of direct access to the structure element.
2015-12-22iio: adc: ina2xx: Fix incorrect report of data endianness to userspace.Jonathan Cameron1-1/+1
This was extracted from a reposting of the driver after it had been applied to the IIO tree. I have fast tracked it as the driver will be in 4.5 and it would be nice to fix this trivial issue before it is. Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-21iio: exynos-adc: fix irqf_oneshot.cocci warningsValentin Rothberg1-1/+1
Since commit 1c6c69525b40 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. Generated by: scripts/coccinelle/misc/irqf_oneshot.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-19iio: ina2xx: fix channel order in software bufferMarc Titinger1-2/+2
POWER and CURRENT were swapped out in the buffer: was current2 and power3, correct order is power2 and current3. Signed-off-by: Marc Titinger <mtitinger@baylibre.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-13Merge 4.4-rc5 into staging-nextGreg Kroah-Hartman1-1/+3
We want those fixes in here for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-12iio: adc: add IMX7D ADC driver supportHaibo Chen3-0/+619
Freescale i.MX7D soc contains a new ADC IP. This patch add this ADC driver support, and the driver only support ADC software trigger. Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12iio: ina2xx: give the capture kthread a more useful name string.Marc Titinger1-1/+2
PID PPID USER STAT VSZ %VSZ %CPU COMMAND 144 2 root DW 0 0% 33% [ina226:1-8800us] 141 2 root DW 0 0% 25% [ina226:0-8800us] 40 2 root SW 0 0% 15% [irq/156-4802a00] 147 2 root DW 0 0% 7% [ina226:2-8800us] 145 1 root S 1236 0% 6% dd if /dev/iio:device1 of /dev/null 148 1 root S 1236 0% 4% dd if /dev/iio:device2 of /dev/null 149 137 root R 1244 0% 3% top -d 1 142 1 root S 1236 0% 2% dd if /dev/iio:device0 of /dev/null Signed-off-by: Marc Titinger <mtitinger@baylibre.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12iio: ina2xx: re-instate a sysfs show/store for the shunt resistor valueMarc Titinger1-6/+46
Different probe modules use different resistor values. The front-end application may read a probe ID (from eeprom) and set the shunt value accordingly. Signed-off-by: Marc Titinger <mtitinger@baylibre.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12iio: ina2xx: provide a sysfs parameter to allow async readout of the ADCsMarc Titinger1-9/+45
This can lead to repeated or skipped samples depending on the clock beat between the capture thread and the chip sampling clock, but will also spare reading/waiting for the Capture Ready Flag and improve the available i2c bandwidth for reading measurements. Output of iio_info: ...snip... 4 device-specific attributes found: attr 0: in_oversampling_ratio value: 4 attr 1: in_allow_async_readout value: 0 attr 2: integration_time_available value: 140 204 332 588 1100 2116... attr 3: in_sampling_frequency value: 114 Signed-off-by: Marc Titinger <mtitinger@baylibre.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12iio: ina2xx: add support for TI INA2xx Power MonitorsMarc Titinger3-0/+679
in SOFTWARE buffer mode, a kthread will capture the active scan_elements into a kfifo, then compute the remaining time until the next capture tick and do an active wait (udelay). This will produce a stream of up to fours channels plus a 64bits timestamps (ns). Tested with ina226, on BeagleBoneBlack. Datasheet: http://www.ti.com/lit/gpn/ina226 Signed-off-by: Marc Titinger <mtitinger@baylibre.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12iio:adc128s052: add support for adc124s021Oliver Stäbler2-4/+15
Signed-off-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch> Reviewed-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-02iio: adc: mcp3422: Add mcp3421 supportSascha Hauer1-0/+9
The mcp3421 is the single channel variant of the mcp342x family. Support is straight forward, only the channels array has to be added for this chip. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-01iio: exynos-adc: add experimental touchscreen supportArnd Bergmann1-7/+217
This adds support for the touchscreen on Samsung s3c64xx. The driver is completely untested but shows roughly how it could be done, following the example of the at91 driver. compared to the old plat-samsung/adc driver, there is no support for prioritizing ts over other clients, nor for oversampling. From my reading of the code, the priorities didn't actually have any effect at all, but the oversampling might be needed. Verifying this driver is the main issue that is currently holding up multiplatform support for s3c64xx, so any help in testing is very much appreciated. The current version uses the IS_REACHABLE() that is going to be introduced in the linux-media tree, please comment this out for testing. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-01Merge tag 'iio-for-4.5a' of ↵Greg Kroah-Hartman8-5/+1397
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new device support, features and cleanups for IIO in the 4.5 cycle Usual mixed bag, but the big item perhaps in this series is the DMA buffer support added by Lars-Peter Clausen. It's been in the works for a long time and it will be interesting to see what hardware support shows up now that this is available. New core features + associate cleanup. * Add generic DMA buffer infrastructure * Add a DMAengine framework based buffer Also associated minor changes. - Set the device buffer watermark based on the minimum watermark for all attached buffers rather than just the 'primary' one. - iio_buffer_init - only set the watermark default if one hasn't already been provided. This allows simple support for devices with a fixed watermark. - read only attribute for watermark on fixed watermark devices. - add explicit buffer enable/disable callbacks to allow the buffer to do more than trivial actions when it is being turned on and off. * IIO_VAL_INT support in write_raw_get_fmt function. New device support * Freescale MMA7455/7456L accelerometers * Memsic MXC6255XC accelerometer * ST lis2dh12 accelerometer * TI ADS8688 ADC * TI Palamas (twl6035/7) gpadc New driver features * mma8452 - support either of the available interrupt pins to cope with the case where board layout has lead to a particular one being connected. Staging graduation * Dummy driver - this driver acts as both an example and a test device for those with out hardware to develop userspace code against. Cleanups and minor bits and bobs. * treewide - Sort out the ordering of iio_device_register/unregister vs runtime pm function calls so that it's all nice and consistent and not race prone. - Check sscanf return values. None of the cases will actually happen as the strings are supplied internally, but best to be consistent on this. * ad7780 - switch over to the gpio descriptor interface and remove the now unused platform data which gets rid of a header entirely. * ad7793 - drop a pointless else statement. * at91_adc - Swap kmalloc_array in for a kmalloc doing the same job. * dummy - get rid of some commented out lines that snuck in during the move of the driver. * lm3533-als - Print an error message on provision of an invalid resistance. * mcp320x - Add compatible strings with vendor prefix and deprecate those with no vendor prefix. * mxs-lradc - Use BIT macro in various places rather than shifted ones. * pa12203001 - Power off the chip if the registration fails. * pulsedlight-lidar-lite - add runtime PM support. * xilinx XADC - constify an iio_buffer_setup_ops structure.
2015-11-22IIO: adc: at91_adc.c Prefer kmalloc_array over kmalloc with multiplyNizam Haider1-1/+1
So this patch swaps that use out for kmalloc_array instead. Signed-off-by Nizam Haider <nijamh@cdac.in> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-21iio: adc: spmi-vadc: add missing of_node_putJulia Lawall1-1/+3
for_each_available_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; @@ for_each_available_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | + of_node_put(child); ? return ...; ) ... } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-18Merge tag 'iio-fixes-for-4.4a' of ↵Greg Kroah-Hartman3-7/+18
ssh://ra.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 4.4 cycle. This set does not include those for issues introduced during the merge window. Fixes of those will follow in a future series. * ad5064 - Make sure the local i2c_write returns 0 on success rather than the number of bytes transfered. Otherwise we report an error on all writes. - Fix a shift for ad5629 and ad5669 which gives incorrect DAC output on these parts. * ad7793 - The product ID on the datasheet is wrong. Fix it in the driver. * IIO_DUMMY_EVGEN - select IRQ_WORK as a dependency. * lpc32xx - make sure clock is prepared before enabling. * si7020 - data byte order was reversed. Fix it. * vf610 - Internal temperature calculation was wrong if a different reference voltage was used. Now use a linear interpolation function to make it work over the full range. - Fix a division by zero in the case of a device tree property not being present (same issue two fixes). * xilinx XADC - VREFN scale was wrong - fix it.
2015-11-18iio: adc: xilinx: constify iio_buffer_setup_ops structureJulia Lawall1-1/+1
The iio_buffer_setup_ops structures are never modified, so declare this one as const, like the others. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-15iio: adc: xilinx: Fix VREFN scaleThomas Betker1-0/+1
The scaling factor for VREFN is 3.0/4096 (not 1.0/4096), just as for VREFP. This is not immediately obvious from the specification (Xilinx UG480), but has been confirmed by Xilinx support. Suggested-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-15iio: adc: ad7793: removed unnecessary else.Nizam Haider1-3/+2
Else is not generally useful after a break or return. Signed-off-by: Nizam Haider <nijamh@cdac.in> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-15iio: adc: Add TI ADS8688Sean Nyekjaer3-0/+497
This patch adds support for the Texas Intruments ADS8688 ADC. Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Reviewed-by: Martin Hundebøll <martin.hundeboll@prevas.dk> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-08iio: adc: vf610_adc: Fix division by zero errorSanchayan Maity1-1/+2
In case the fsl,adck-max-frequency property is not present in the device tree, a division by zero error results during the probe call on kernel boot (see below). This patch fixes it and also restores device tree compatibility in case kernels are booting with old device trees without this property specified. [ 1.063229] Division by zero in kernel. [ 1.067152] CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc5-00212-gcc88cef #37 [ 1.074650] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) [ 1.081135] Backtrace: [ 1.083694] [<800134a4>] (dump_backtrace) from [<8001369c>] (show_stack+0x18/0x1c) [ 1.091340] r7:00000008 r6:8e0ae210 r5:00000000 r4:8e299800 [ 1.097146] [<80013684>] (show_stack) from [<80297b1c>] (dump_stack+0x24/0x28) [ 1.104483] [<80297af8>] (dump_stack) from [<80013608>] (__div0+0x1c/0x20) [ 1.111421] [<800135ec>] (__div0) from [<802968b4>] (Ldiv0+0x8/0x10) [ 1.117865] [<80424350>] (vf610_adc_probe) from [<803153b4>] (platform_drv_probe+0x4c/0xac) [ 1.126311] r10:00000000 r9:8076a5ec r8:00000000 r7:fffffdfb r6:807cc67c r5:8e0ae210 [ 1.134319] r4:807f6c54 [ 1.136915] [<80315368>] (platform_drv_probe) from [<803138bc>] (driver_probe_device+0x20c/0x2f8) [ 1.145882] r7:807cc67c r6:00000000 r5:8e0ae210 r4:807f6c54 [ 1.151657] [<803136b0>] (driver_probe_device) from [<80313a3c>] (__driver_attach+0x94/0x98) [ 1.160190] r9:8076a5ec r8:00000098 r7:00000000 r6:8e0ae244 r5:807cc67c r4:8e0ae210 [ 1.168112] [<803139a8>] (__driver_attach) from [<80311cb8>] (bus_for_each_dev+0x70/0xa4) [ 1.176383] r7:00000000 r6:803139a8 r5:807cc67c r4:00000000 [ 1.182159] [<80311c48>] (bus_for_each_dev) from [<80313318>] (driver_attach+0x24/0x28) [ 1.190260] r6:807bb568 r5:8e2a5b00 r4:807cc67c [ 1.194996] [<803132f4>] (driver_attach) from [<80312f50>] (bus_add_driver+0x1a4/0x21c) [ 1.203113] [<80312dac>] (bus_add_driver) from [<803142a8>] (driver_register+0x80/0x100) [ 1.211275] r7:8e2a7dc0 r6:807a8160 r5:80789e14 r4:807cc67c [ 1.217075] [<80314228>] (driver_register) from [<803152f8>] (__platform_driver_register+0x5c/0x64) [ 1.226216] r5:80789e14 r4:807a8160 [ 1.229877] [<8031529c>] (__platform_driver_register) from [<80789e30>] (vf610_adc_driver_init+0x1c/0x20) [ 1.239556] [<80789e14>] (vf610_adc_driver_init) from [<800095f8>] (do_one_initcall+0x94/0x1dc) [ 1.248365] [<80009564>] (do_one_initcall) from [<8076ae34>] (kernel_init_freeable+0x13c/0x1e0) [ 1.257155] r10:80794830 r9:8076a5ec r8:00000098 r7:807d5780 r6:807d5780 r5:00000006 [ 1.265153] r4:807a0ee8 [ 1.267753] [<8076acf8>] (kernel_init_freeable) from [<80590ef0>] (kernel_init+0x18/0xf0) [ 1.276021] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:80590ed8 [ 1.284015] r4:807d5780 [ 1.286615] [<80590ed8>] (kernel_init) from [<8000f878>] (ret_from_fork+0x14/0x3c) [ 1.294278] r5:80590ed8 r4:00000000 Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Acked-by: Fugang Duan <B38611@freescale.com> Acked-by: Stefan Agner <stefan@agner.ch> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-05Merge tag 'spi-v4.4' of ↵Linus Torvalds10-10/+0
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
2015-11-04Merge remote-tracking branches 'spi/topic/omap-100k', ↵Mark Brown10-10/+0
'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis10-10/+0
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-27Merge 4.3-rc7 into staging-nextGreg Kroah-Hartman1-0/+34
We want the other staging patches in this branch as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-25iio:ad7793: Fix ad7785 product IDLars-Peter Clausen1-1/+1
While the datasheet for the AD7785 lists 0xXB as the product ID the actual product ID is 0xX3. Fix the product ID otherwise the driver will reject the device due to non matching IDs. Fixes: e786cc26dcc5 ("staging:iio:ad7793: Implement stricter id checking") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-25iio: adc: mcp320x: Add compatible with vendor prefix to OF tableJavier Martinez Canillas1-0/+28
The driver Device Tree binding now documents compatible strings that have a vendor prefix, so add these to the OF device ID table to match and mark the old ones as deprecated explaining that should not be used anymore. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-25vf610_adc: Fix internal temperature calculationBhuvanchandra DV1-5/+14
Calculate ADCR_VTEMP25 using VTEMP25 at VREFH_ADC 3V3. Existing calculations consider the typical values provided in datasheet. Those typical values are valid for VREFH_ADC at 3.0V. VTEMP25 is different for different VREFH_ADC voltages. With VREFH_ADC at 3.3V, voltage at 25°C is 0.699V. Hence update the VTEMP25 to 0.699V which gives ADCR@Temp25 as 867. Formula for finding ADCR@Temp25: ADCR@Temp25 = (ADCR@Vdd * V@TEMP25 * 10) / VDDconv ADCR@Vdd for 12-Bit ADC = 4095 VDDconv = VREFH_ADC * 10 VREFH_ADC@3.3V ADCR@Temp25 = (4095 * .699 * 10) / 33 ADCR@Temp25 ~= 867 | VREFH_ADC | V@TEMP25 | VDDconv | ADCR@Temp25 | | 3.0V | 0.696mV | 30 | 950 | | 3.3V | 0.699mV | 33 | 867 | Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Fugang Duan <B38611@freescale.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-25iio:adc:palmas: add DT supportMarek Belisko1-5/+47
Code was found at: https://android.googlesource.com/kernel/tegra/+/a90856a6626d502d42c6e7abccbdf9d730b36270%5E%21/#F1 Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Marek Belisko <marek@goldelico.com> [Fixed minor typos + add channels list to documentation] Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-25iio:adc: add iio driver for Palmas (twl6035/7) gpadcH. Nikolaus Schaller3-0/+826
This driver code was found as: https://android.googlesource.com/kernel/tegra/+/aaabb2e045f31e5a970109ffdaae900dd403d17e/drivers/staging/iio/adc Fixed various compilation issues and test this driver on omap5 evm. Signed-off-by: Pradeep Goudagunta <pgoudagunta@nvidia.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Marek Belisko <marek@goldelico.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-03iio: adc: twl4030: Fix ADC[3:6] readingsAdam YH Lee1-0/+34
MADC[3:6] reads incorrect values without these two following changes: - enable the 3v1 bias regulator for ADC[3:6] - configure ADC[3:6] lines as input, not as USB Signed-off-by: Adam YH Lee <adam.yh.lee@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-30iio: adc: max1363: leave sysfs naming to the coreMartin Kepplinger1-1/+0
This shouldn't actually change anything since the core calls the events sysfs folder "events" anyways. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-30iio: adc: ad799x: leave sysfs naming to the coreMartin Kepplinger1-1/+0
This shouldn't change anything since the core calls the events folder "events" anyways. Signed-off-by: Martin Kepplinger <martink@posteo.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: adc: vf610: fix simple_return.cocci warningskbuild test robot1-6/+2
drivers/iio/adc/vf610_adc.c:766:1-4: WARNING: end returns can be simpified and declaration on line 755 can be dropped Simplify a trivial if-return sequence. Possibly combine with a preceding function call. Generated by: scripts/coccinelle/misc/simple_return.cocci CC: Sanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: adc: twl6030-gpadc: Fix module autoload for OF platform driverLuis de Bethencourt1-0/+1
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: adc: hi8435: Holt HI-8435 threshold detectorVladimir Barinov3-0/+546
Add Holt threshold detector driver for HI-8435 chip Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-31iio: adc: vf610: Add IIO buffer support for Vybrid ADCSanchayan Maity2-7/+100
This patch adds support for IIO buffer to the Vybrid ADC driver. IIO triggered buffer infrastructure along with iio sysfs trigger is used to leverage continuous sampling support provided by the ADC block. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-22iio: adc: mcp320x: Set struct spi_driver .of_match_tableJavier Martinez Canillas1-0/+1
The driver has an OF id table but the .of_match_table is not set so the SPI core can't do an OF style match and the table was unused. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-22iio: adc128s052: Add OF match tableJavier Martinez Canillas1-0/+8
The Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt DT binding doc lists "ti,adc128s052" or "ti,adc122s021" as compatible strings but the corresponding driver does not have an OF match table. Add the table to the driver so the SPI core can do an OF style match. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-22iio: adc: max1027: Set struct spi_driver .of_match_tableJavier Martinez Canillas1-0/+1
The driver has an OF id table but the .of_match_table is not set so the SPI core can't do an OF style match and the table was unused. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-16iio: adc: xilinx-xadc: Push interrupts into hardirq contextXander Huff2-29/+10
The driver currently registers a pair of irq handlers using request_threaded_irq(), however the synchronization mechanism between the hardirq and the threadedirq handler is a regular spinlock. Unfortunately, this breaks PREEMPT_RT builds, where a spinlock can sleep, and is thus not able to be acquired from a hardirq handler. This patch gets rid of the threaded handler and pushes all interrupt handling into the hardirq context, and uses request_irq(). To validate that this change has no impact on RT performance, here are cyclictest values with no processes running: $ sudo cyclictest -S -m -p 98 policy: fifo: loadavg: 0.00 0.01 0.05 1/174 2539 T: 0 ( 1405) P:98 I:1000 C:167010520 Min: 9 Act: 12 Avg: 12 Max: 75 T: 1 ( 1862) P:98 I:1500 C:111340339 Min: 9 Act: 12 Avg: 12 Max: 73 Then, all xadc raw handles were accessed in a continuous loop via /sys/bus/iio/devices/iio:device0: $ sudo cyclictest -S -m -p 98 policy: fifo: loadavg: 7.84 7.70 7.63 3/182 4260 T: 0 ( 2559) P:98 I:1000 C:241557018 Min: 11 Act: 18 Avg: 21 Max: 74 T: 1 ( 2560) P:98 I:1500 C:161038006 Min: 10 Act: 21 Avg: 20 Max: 73 Signed-off-by: Xander Huff <xander.huff@ni.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-12iio:adc:cc10001_adc: resort entry in Kconfig and MakefileHartmut Knaack2-12/+12
Move the entry for the CC 10001 ADC driver in Kconfig and Makefile up to maintain alphabetic order. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-12iio:adc:berlin2-adc: coding style cleanupHartmut Knaack1-29/+35
Some adjustment of indentation to make checkpatch.pl happy in strict mode. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-16 16:11:31 +0000