summaryrefslogtreecommitdiffstats
path: root/drivers/iio/adc
AgeCommit message (Collapse)AuthorFilesLines
2022-06-20Merge tag 'iio-fixes-for-5.19a' of ↵Greg Kroah-Hartman8-28/+50
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO fixes for the 5.19 cycle. Most of these have been in next for a long time. Unfortunately there was one stray patch in the branch (wasn't a fix), so I've just rebased to remove that. * testing - Fix a missing MODULE_LICENSE() warning by restricting possible build configs. * Various drivers - Fix ordering of iio_get_trigger() being called before iio_trigger_register() * adi,admv1014 - Fix dubious x & !y warning. * adi,axi-adc - Fix missing of_node_put() in error and normal paths. * aspeed,adc - Add missing of_node_put() * fsl,mma8452 - Fix broken probing from device tree. - Drop check on return value of i2c write to device to cause reset as ACK will be missing (device reset before sending it). * fsl,vf610 - Fix documentation of in_conversion_mode ABI. * iio-trig-sysfs - Ensure irq work has finished before freeing the trigger. * invensense,mpu3050 - Disable regulators in error path. * invensense,icm42600 - Fix collision of enum value of 0 with error path where 0 is no match. * renesas,rzg2l_Adc - Add missing fwnode_handle_put() in error path. * rescale - Fix a boolean logic bug for detection of raw + scale affecting an obscure corner case. * semtech,sx9324 - Check return value of read of pin_defs * st,stm32-adc: - Fix interaction across ADC instances for some supported devices. - Drop false spurious IRQ messages. - Fix calibration value handling. If we can't calibrate don't expose the vref_int channel. - Fix maximum clock rate for stm32pm15x * ti,ads131e08 - Add missing fwnode_handle_put() in error paths. * xilinx,ams - Fix variable checked for error from platform_get_irq() * x-powers,axp288 - Overide TS_PIN bias current for boards where it is not correctly initialized. * yamaha,yas530 - Fix inverted check on calibration data being all zeros. * tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits) iio:proximity:sx9324: Check ret value of device_property_read_u32_array() iio: accel: mma8452: ignore the return value of reset operation iio: adc: stm32: fix maximum clock rate for stm32mp15x iio: adc: stm32: fix vrefint wrong calibration value handling iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value) iio: adc: vf610: fix conversion mode sysfs node name iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m iio:humidity:hts221: rearrange iio trigger get and register iio:chemical:ccs811: rearrange iio trigger get and register iio:accel:mxc4005: rearrange iio trigger get and register iio:accel:kxcjk-1013: rearrange iio trigger get and register iio:accel:bma180: rearrange iio trigger get and register iio: afe: rescale: Fix boolean logic bug iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message iio: adc: stm32: Fix ADCs iteration in irq handler iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels() iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties() iio: trigger: sysfs: fix use-after-free on remove ...
2022-06-19iio: adc: stm32: fix maximum clock rate for stm32mp15xOlivier Moysan1-1/+1
Change maximum STM32 ADC input clock rate to 36MHz, as specified in STM32MP15x datasheets. Fixes: d58c67d1d851 ("iio: adc: stm32-adc: add support for STM32MP1") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220609095234.375925-1-olivier.moysan@foss.st.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: stm32: fix vrefint wrong calibration value handlingOlivier Moysan1-10/+17
If the vrefint calibration is zero, the vrefint channel output value cannot be computed. Currently, in such case, the raw conversion value is returned, which is not relevant. Do not expose the vrefint channel when the output value cannot be computed, instead. Fixes: 0e346b2cfa85 ("iio: adc: stm32-adc: add vrefint calibration support") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220609095856.376961-1-olivier.moysan@foss.st.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_clientMiaoqian Lin1-0/+3
of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: ef04070692a2 ("iio: adc: adi-axi-adc: add support for AXI ADC IP core") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220524074517.45268-1-linmq006@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_dataMiaoqian Lin1-0/+1
of_find_node_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: d0a4c17b4073 ("iio: adc: aspeed: Get and set trimming data.") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220516075206.34580-1-linmq006@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs messageYannick Brosseau1-10/+0
The check for spurious IRQs introduced in 695e2f5c289bb assumed that the bits in the control and status registers are aligned. This is true for the H7 and MP1 version, but not the F4. The interrupt was then never handled on the F4. Instead of increasing the complexity of the comparison and check each bit specifically, we remove this check completely and rely on the generic handler for spurious IRQs. Fixes: 695e2f5c289b ("iio: adc: stm32-adc: fix a regression when using dma and irq") Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220516203939.3498673-3-yannick.brosseau@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: stm32: Fix ADCs iteration in irq handlerYannick Brosseau1-1/+6
The irq handler was only checking the mask for the first ADCs in the case of the F4 and H7 generation, since it was iterating up to the num_irq value. This patch add the maximum number of ADC in the common register, which map to the number of entries of eoc_msk and ovr_msk in stm32_adc_common_regs. This allow the handler to check all ADCs in that module. Tested on a STM32F429NIH6. Fixes: 695e2f5c289b ("iio: adc: stm32-adc: fix a regression when using dma and irq") Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220516203939.3498673-2-yannick.brosseau@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ↵Jialin Zhang1-3/+7
ads131e08_alloc_channels() fwnode_handle_put() should be used when terminating device_for_each_child_node() iteration with break or return to prevent stale device node references from being left behind. Fixes: d935eddd2799 ("iio: adc: Add driver for Texas Instruments ADS131E0x ADC family") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Link: https://lore.kernel.org/r/20220517033020.2033324-1-zhangjialin11@huawei.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-19iio: adc: rzg2l_adc: add missing fwnode_handle_put() in ↵Jialin Zhang1-2/+6
rzg2l_adc_parse_properties() fwnode_handle_put() should be used when terminating device_for_each_child_node() iteration with break or return to prevent stale device node references from being left behind. Fixes: d484c21bacfa ("iio: adc: Add driver for Renesas RZ/G2L A/D converter") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220517033526.2035735-1-zhangjialin11@huawei.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-03Merge tag 'char-misc-5.19-rc1' of ↵Linus Torvalds15-272/+982
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc / other smaller driver subsystem updates from Greg KH: "Here is the large set of char, misc, and other driver subsystem updates for 5.19-rc1. The merge request for this has been delayed as I wanted to get lots of linux-next testing due to some late arrivals of changes for the habannalabs driver. Highlights of this merge are: - habanalabs driver updates for new hardware types and fixes and other updates - IIO driver tree merge which includes loads of new IIO drivers and cleanups and additions - PHY driver tree merge with new drivers and small updates to existing ones - interconnect driver tree merge with fixes and updates - soundwire driver tree merge with some small fixes - coresight driver tree merge with small fixes and updates - mhi bus driver tree merge with lots of updates and new device support - firmware driver updates - fpga driver updates - lkdtm driver updates (with a merge conflict, more on that below) - extcon driver tree merge with small updates - lots of other tiny driver updates and fixes and cleanups, full details in the shortlog. All of these have been in linux-next for almost 2 weeks with no reported problems" * tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits) habanalabs: use separate structure info for each error collect data habanalabs: fix missing handle shift during mmap habanalabs: remove hdev from hl_ctx_get args habanalabs: do MMU prefetch as deferred work habanalabs: order memory manager messages habanalabs: return -EFAULT on copy_to_user error habanalabs: use NULL for eventfd habanalabs: update firmware header habanalabs: add support for notification via eventfd habanalabs: add topic to memory manager buffer habanalabs: handle race in driver fini habanalabs: add device memory scrub ability through debugfs habanalabs: use unified memory manager for CB flow habanalabs: unified memory manager new code for CB flow habanalabs/gaudi: set arbitration timeout to a high value habanalabs: add put by handle method to memory manager habanalabs: hide memory manager page shift habanalabs: Add separate poll interval value for protocol habanalabs: use get_task_pid() to take PID habanalabs: add prefetch flag to the MAP operation ...
2022-05-19Merge tag 'iio-for-5.19a' of ↵Greg Kroah-Hartman15-272/+982
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: First set of IIO new device support, features and cleanup for 5.19 Usual mixed bag. Stand out this time is Andy Shevchenko's continuing effort to move drivers over the generic firmware interfaces. Device support * sprd,sc2720 - upm9620 binding addition. - Refactor and support for sc2720, sc2721 and sc2730. * ti,ads1015 - Refactor driver and add support for TLA2024. Device support (IDs only) * invensense,mpu6050 - Add ID for ICM-20608-D. * st,accel: - Add ID for lis302dl. * st,lsm6dsx - Add support for ASM330LHHX (can fallback to LSM6DSR.) Features * convert drivers to device properties - IIO core - adi,ad7266 - adi,adis16480 - adi,adxl355 - bosch,bmi160 - domintech,dmard06 - fsl,fxas21002c - invensense,mpu3050 - linear,ltc2983 - linear,ltc2632 - maxbotix,mb1232 - maxim,max31856 - maxim,max31865 - multiplexer - ping - rescale - taos,tsl2772 * core - Add runtime check on whether realbits fit in storagebits for each channel. * adi,ad_sigma_delta - Add sequencer support and relevant update_scan_mode callbacks for adi,ad7192 and adi,ad7124. Cleanup and minor fixes * MAINTAINERS - Update Lorenzo Bianconi's email address for IIO drivers. - Add entry for ad3552r and update maintainer in dt-binding doc. * tree-wide - Replace strtobool() with kstrtobool(). - Drop false OF dependencies. * core - Tidy up and document IIO modes. - Take iio_buffer_enabled() out of header allowing current_mode to be moved to the opaque structure. - As all kfifo buffers use the same mode value, drop that parameter and set it unconditionally. - White space fixes and similar. - Drop use of list iterator variable for list_for_each_entry_continue_reverse and use list_prepare_entry to restart. * sysfs-trigger - Replace use of 'found' variable with dedicate list iterator variable. * adi,ad7124 - Drop misleading shift. * adi,ad2s1210 - Remove redundant local variable assignment. * adi,adis16480 - Use local device pointer to reduce repetition. - Improve handling of clocks. * domintech,dmard09 - White space. * dummy driver - Improve error handling. * fsl,mma8452 - Add missing documentation of name element. * invensense,mpu3050 - Stop remove() returning non 0. * kionix,kxsd9 - White space. * linear,ltc2688 - Use local variable for struct device. - Combine of_node_put() error handling paths. * linear,ltc2983 - Avoid use of constants in messages where a define is available. * microchip,mcp4131 - Fix compatible in dt example. * pni,rm3100 - Stop directly accessing iio_dev->current_mode just to find out if the buffer is enabled. * renesas,rzg2l - Relax kconfig constraint to include newer devices. * sprd,sc27xx - Fix wrong scaling mask. - Improve the calibration values. * samsung,ssp - Replace a 'found' variable in favor of an explicit value that was found. * sensortek,stk3xx - Add proximity-near-level binding and driver support. * st,st_sensors: - Drop unused accel_type enum. - Return early in *_write_raw() - Drop unnecessary locking in _avail functions. - Add local lock to protect odr against concurrent updates allowing mlock to no longer be used outside of the core. - Use iio_device_claim_direct_mode() rather than racy checking of the current mode. * st,stmpe-adc - Fix checks on wait_for_completion_timeout(). - Allow use of of_device_id for matching. * st,stm32-dfsdm - Stop accessing iio_dev->current_mode to find out if the buffer is enabled (so we can hide that variable in the opaque structure) * st,vl53l0x - Fix checks on wait_for_completion_timeout. * ti,ads1015 - Add missing ID for ti,ads1115 in binding doc. - Convert from repeated chip ID look up to selecting static const data. - Switch to read_avail() callback. * ti,ads8688 - Use of_device_id for driver matching. * ti,palmas-adc - Drop a warning on minor calibration mismatch leading to slightly negative values after applying the calibration. * tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (95 commits) iio: ti-ads8688: use of_device_id for OF matching iio: stmpe-adc: use of_device_id for OF matching dt-bindings: iio: Fix incorrect compatible strings in examples iio: gyro: mpu3050: Make mpu3050_common_remove() return void iio: dac: ltc2632: Make use of device properties iio: temperature: max31865: Make use of device properties iio: proximity: mb1232: Switch to use fwnode_irq_get() iio: imu: adis16480: Improve getting the optional clocks iio: imu: adis16480: Use temporary variable for struct device iio: imu: adis16480: Make use of device properties staging: iio: ad2s1210: remove redundant assignment to variable negative iio: adc: sc27xx: add support for PMIC sc2730 iio: adc: sc27xx: add support for PMIC sc2720 and sc2721 iio: adc: sc27xx: refactor some functions for support more PMiCs iio: adc: sc27xx: structure adjustment and optimization iio: adc: sc27xx: Fine tune the scale calibration values iio: adc: sc27xx: fix read big scale voltage not right dt-bindings:iio:adc: add sprd,ump9620-adc dt-binding iio: proximity: stk3310: Export near level property for proximity sensor dt-bindings: iio: light: stk33xx: Add proximity-near-level ...
2022-05-19iio: adc: qcom-vadc-common: add reverse scaling for PMIC5 Gen2 ADC_TMJishnu Prakash1-0/+11
Add reverse scaling function for PMIC5 Gen2 ADC_TM, to convert temperature to raw ADC code, for setting thresholds for thermistor channels. Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/1648991869-20899-3-git-send-email-quic_jprakash@quicinc.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-14iio: adc: xilinx-ams: fix return error variableLv Ruyi1-1/+1
Return irq instead of ret which always equals to zero here. Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver") Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-05-07iio: adc: axp288: Override TS pin bias current for some modelsHans de Goede1-0/+8
Since commit 9bcf15f75cac ("iio: adc: axp288: Fix TS-pin handling") we preserve the bias current set by the firmware at boot. This fixes issues we were seeing on various models. Some models like the Nuvision Solo 10 Draw tablet actually need the old hardcoded 80ųA bias current for battery temperature monitoring to work properly. Add a quirk entry for the Nuvision Solo 10 Draw to the DMI quirk table to restore setting the bias current to 80ųA on this model. Fixes: 9bcf15f75cac ("iio: adc: axp288: Fix TS-pin handling") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215882 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220506095040.21008-1-hdegoede@redhat.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-05-01iio: ti-ads8688: use of_device_id for OF matchingKrzysztof Kozlowski1-0/+1
The of_device_id was added to allow module autoloading, but it should be also used to allow driver matching via Devicetree. This also fixes W=1 warning: drivers/iio/adc/ti-ads8688.c:501:34: error: ‘ads8688_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220501103447.111392-2-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-05-01iio: stmpe-adc: use of_device_id for OF matchingKrzysztof Kozlowski1-6/+7
The of_device_id was added to allow module autoloading, but it should be also used to allow driver matching via Devicetree. This also fixes W=1 warning: drivers/iio/adc/stmpe-adc.c:357:34: error: ‘stmpe_adc_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220501103447.111392-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: adc: sc27xx: add support for PMIC sc2730Cixi Geng1-0/+116
sc2730 is the product of sc27xx series. Co-developed-by: Yuming Zhu <yuming.zhu1@unisoc.com> Signed-off-by: Yuming Zhu <yuming.zhu1@unisoc.com> Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Link: https://lore.kernel.org/r/20220419142458.884933-8-gengcixi@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: adc: sc27xx: add support for PMIC sc2720 and sc2721Cixi Geng1-2/+201
sc2720 and sc2721 is the product of sc27xx series. Co-developed-by: Yuming Zhu <yuming.zhu1@unisoc.com> Signed-off-by: Yuming Zhu <yuming.zhu1@unisoc.com> Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Link: https://lore.kernel.org/r/20220419142458.884933-7-gengcixi@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: adc: sc27xx: refactor some functions for support more PMiCsCixi Geng1-16/+40
Refactor the common adc_nvmem_cell_calib_data,adc_to_volt and call these in the origin sc27xx_adc_scale_calibration,sc27xx_adc_to_volt Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Link: https://lore.kernel.org/r/20220419142458.884933-6-gengcixi@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: adc: sc27xx: structure adjustment and optimizationCixi Geng1-15/+76
Introduce one variant device data structure to be compatible with SC2731 PMIC since it has different scale and ratio calculation and so on. also rename the SC27xx to SC2731 for some definition and function. Co-developed-by: Yuming Zhu <yuming.zhu1@unisoc.com> Signed-off-by: Yuming Zhu <yuming.zhu1@unisoc.com> Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Link: https://lore.kernel.org/r/20220419142458.884933-5-gengcixi@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: adc: sc27xx: Fine tune the scale calibration valuesCixi Geng1-8/+8
Small adjustment the scale calibration value for the sc2731, use new name sc2731_[big|small]_scale_graph_calib, and remove the origin [big|small]_scale_graph_calib struct for unused. Fixes: 8ba0dbfd07a35 (iio: adc: sc27xx: Add ADC scale calibration) Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Link: https://lore.kernel.org/r/20220419142458.884933-4-gengcixi@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: adc: sc27xx: fix read big scale voltage not rightCixi Geng1-2/+2
Fix wrong configuration value of SC27XX_ADC_SCALE_MASK and SC27XX_ADC_SCALE_SHIFT by spec documetation. Fixes: 5df362a6cf49c (iio: adc: Add Spreadtrum SC27XX PMICs ADC support) Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/20220419142458.884933-3-gengcixi@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: adc: stmpe-adc: Fix wait_for_completion_timeout return value checkMiaoqian Lin1-4/+4
wait_for_completion_timeout() returns unsigned long not long. it returns 0 if timed out, and positive if completed. The check for <= 0 is ambiguous and should be == 0 here indicating timeout which is the only error case Fixes: e813dde6f833 ("iio: stmpe-adc: Use wait_for_completion_timeout") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com> Link: https://lore.kernel.org/r/20220412065150.14486-1-linmq006@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: adc: Kconfig: Make RZG2L_ADC depend on ARCH_RZG2LLad Prabhakar1-1/+1
ADC block is common on Renesas RZ/G2L and RZ/V2L SoC's, so instead of adding dependency for each SoC's add dependency on ARCH_RZG2L. The ARCH_RZG2L config option is already selected by ARCH_R9A07G044 and ARCH_R9A07G054. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220406070315.13862-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: adc: ad7266: convert probe to full device-managedMaíra Canal1-30/+14
Convert probe functions to device-managed variants, with exception of the regulator, which required a devm_add_action_or_reset() hook registration. Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Maíra Canal <maira.canal@usp.br> Link: https://lore.kernel.org/r/20220407115621.10781-1-maira.canal@usp.br Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: Replace strtobool() with kstrtobool()Lars-Peter Clausen3-4/+4
strtobool() is deprecated and just a wrapper around kstrtobool().Replace it with kstrtobool() so the deprecated function can be removed eventually. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220409105812.2113895-1-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10iio: core: Simplify the registration of kfifo buffersMiquel Raynal2-4/+1
Among all the users of the kfifo buffers, no one uses the INDIO_BUFFER_HARDWARE mode. So let's take this as a general rule and simplify a little bit the internals - overall the documentation - by eliminating unused specific cases. Use the INDIO_BUFFER_SOFTWARE mode by default with kfifo buffers, which will basically mimic what all the "non direct" modes do. Cc: Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jyoti Bhayana <jbhayana@google.com> Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220207143840.707510-13-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10iio: core: Hide read accesses to iio_dev->currentmodeMiquel Raynal1-2/+2
In order to later move this variable within the opaque structure, let's create a helper for accessing it in read-only mode. This helper will be exposed to device drivers and kept accessible for the few that could need it. The write access to this variable however should be fully reserved to the core so in a second step we will hide this variable into the opaque structure. Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220207143840.707510-11-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10iio: adc: stm32-dfsdm: Avoid dereferencing ->currentmodeMiquel Raynal1-3/+2
This is an internal variable of the core, let's use the iio_buffer_enabled() helper which is exported for the following purpose: telling if the current mode is a buffered mode, which is precisely what this driver looks for. Cc: Olivier Moysan <olivier.moysan@foss.st.com> Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220207143840.707510-4-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: adc: ad7280a: Fix wrong variable used when setting thresholds.Jonathan Cameron1-6/+6
Name of variable change missed in refactoring patch. Fixes: 112bf4aa4afb ("staging:iio:adc:ad7280a: Switch to standard event control") Reported-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220226175604.662422-1-jic23@kernel.org
2022-04-04iio: adc: ti-ads1015: Switch to read_availMarek Vasut1-45/+67
Replace sysfs attributes with read_avail() callback. This also permits removal of ads1115_info, since the scale attribute tables are now part of chip data. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20220328194725.149150-10-marex@denx.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: adc: ti-ads1015: Replace data_rate with chip data struct ads1015_dataMarek Vasut1-8/+10
Instead of storing only data_rate in private data, store pointer to the whole chip data and use the data_rate from chip data throughout the driver. No functional change. This is done in preparation for switching to read_avail(). Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Andy Shevchenko <andy@kernel.org> Cc: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20220328194725.149150-9-marex@denx.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: adc: ti-ads1015: Convert to OF match dataMarek Vasut1-55/+55
Replace chip type enumeration in match data with pointer to static constant structure which contains all the different chip properties in one place, and then replace handling of chip type in probe() with simple copy of fields in the new match data structure into struct iio_dev. This reduces code and increases static data. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Andy Shevchenko <andy@kernel.org> Cc: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20220328194725.149150-8-marex@denx.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: adc: ti-ads1015: Add static assert to test if shifted realbits fit into ↵Marek Vasut1-2/+24
storagebits Add compile-time static_assert wrapper to verify that shifted realbits fit into storagebits. The macro is implemented in a more generic way so it can be used to verify other values if required. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Andy Shevchenko <andy@kernel.org> Cc: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20220328194725.149150-7-marex@denx.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: adc: ti-ads1015: Add TLA2024 supportMarek Vasut1-2/+51
Add support for TI TLA2024 ADC. This chip is compatible with ADS1015 except it has no comparator in it, hence the comparator configuration bits are missing in Configuration Register and the Hi_Thresh/Lo_Thresh registers are missing as well and so is event support. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Andy Shevchenko <andy@kernel.org> Cc: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20220328194725.149150-6-marex@denx.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: adc: ti-ads1015: Make channel event_spec optionalMarek Vasut1-22/+38
Pass event_spec and num_event_specs to ADS1015_V_CHAN and ADS1015_V_DIFF_CHAN macros, to make it possible to pass no event_spec at all for chips which have no comparator and thus no events. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Andy Shevchenko <andy@kernel.org> Cc: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20220328194725.149150-5-marex@denx.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: adc: ti-ads1015: Deduplicate channel macrosMarek Vasut1-64/+22
These macros differ only in the number of valid bits of each ADC sample and the shift of those bits, i.e. ADS1015 is 12bit ADC shifted by 4 left, ADS1115 is 16bit ADC shifted by 0. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Andy Shevchenko <andy@kernel.org> Cc: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20220328194725.149150-4-marex@denx.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: adc: ti-ads1015: Switch to static const writeable ranges tableMarek Vasut1-12/+9
Switch the driver from code implementing test whether a regmap register is writeable to static const tables describing the test. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Andy Shevchenko <andy@kernel.org> Cc: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20220328194725.149150-3-marex@denx.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: palmas: shut up warning about calibration mismatch (due to noise)H. Nikolaus Schaller1-1/+2
Although technically checking for ADC values below 0 is correct, because they are outside of the calibration values, there is usually noise which spuriously fills the console log with error messages if calculated input voltage gets close to 0V. Ignore small negative calculated values, but clamp them to 0. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/1cee45bfc3fa2ab59dcc17242fb52468035360a1.1646743982.git.hns@goldelico.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: adc: ad7192: add sequencer supportAlexandru Tachici1-1/+41
Add sequencer support for AD7192. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20220322105029.86389-7-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: adc: ad7124: add sequencer supportAlexandru Tachici1-9/+65
Add sequencer support for AD7124. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20220322105029.86389-6-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: adc: ad_sigma_delta: Add sequencer supportLars-Peter Clausen1-10/+133
Some sigma-delta chips support sampling of multiple channels in continuous mode. When the operating with more than one channel enabled, the channel sequencer cycles through the enabled channels in sequential order, from first channel to the last one. If a channel is disabled, it is skipped by the sequencer. If more than one channel is used in continuous mode, instruct the device to append the status to the SPI transfer (1 extra byte) every time we receive a sample. All sigma-delta chips possessing a sampling sequencer have this ability. Inside the status register there will be the number of the converted channel. In this way, even if the CPU won't keep up with the sampling rate, it won't send to userspace wrong channel samples. When multiple channels are enabled in continuous mode, the device needs to perform a measurement on all slots before we can push to userspace the sample. If, during sequencing and data reading, a channel measurement is lost, a desync occurred. In this case, ad_sigma_delta drops the incomplete sample and waits for the device to send the measurement on the first active slot. Co-developed-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20220322105029.86389-5-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: adc: ad7192: Add update_scan_modeAlexandru Tachici1-0/+22
The callback .set_channel cannot be used to enable multiple channels at once, only one is allowed simultaneously. By adding an update_scan_mode callback, every time the continuous mode is activated, channels will be enabled/disabled accordingly. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20220322105029.86389-4-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: adc: ad7124: Add update_scan_modeAlexandru Tachici1-0/+21
The callback .set_channel cannot be used to enable and disable multiple channels at once as they are presented in the active_scan_mask. By adding an update_scan_mode callback, every time the continuous mode is activated, channels will be enabled/disabled accordingly. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20220322105029.86389-3-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: adc: ad7124: Remove shift from scan_typeAlexandru Tachici1-1/+0
The 24 bits data is stored in 32 bits in BE. There is no need to shift it. This confuses user-space apps. Fixes: b3af341bbd966 ("iio: adc: Add ad7124 support") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20220322105029.86389-2-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-03-28Merge tag 'char-misc-5.18-rc1' of ↵Linus Torvalds41-266/+1504
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...
2022-03-21Merge tag 'spi-v5.18' of ↵Linus Torvalds8-24/+8
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The overwhelming bulk of this pull request is a change from Uwe Kleine-König which changes the return type of the remove() function to void as part of some wider work he's doing to do this for all bus types, causing updates to most SPI device drivers. The branch with that on has been cross merged with a couple of other trees which added new SPI drivers this cycle, I'm not expecting any build issues resulting from the change. Otherwise it's been a relatively quiet release with some new device support, a few minor features and the welcome completion of the conversion of the subsystem to use GPIO descriptors rather than numbers: - Change return type of remove() to void. - Completion of the conversion of SPI controller drivers to use GPIO descriptors rather than numbers. - Quite a few DT schema conversions. - Support for multiple SPI devices on a bus in ACPI systems. - Big overhaul of the PXA2xx SPI driver. - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and Sunplus SP7021" [ And this is obviously where that spi change that snuck into the regulator tree _should_ have been :^] * tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits) spi: fsi: Implement a timeout for polling status spi: Fix erroneous sgs value with min_t() spi: tegra20: Use of_device_get_match_data() spi: mediatek: add ipm design support for MT7986 spi: Add compatible for MT7986 spi: sun4i: fix typos in comments spi: mediatek: support tick_delay without enhance_timing spi: Update clock-names property for arm pl022 spi: rockchip-sfc: fix platform_get_irq.cocci warning spi: s3c64xx: Add spi port configuration for Tesla FSD SoC spi: dt-bindings: samsung: Add fsd spi compatible spi: topcliff-pch: Prevent usage of potentially stale DMA device spi: tegra210-quad: combined sequence mode spi: tegra210-quad: add acpi support spi: npcm-fiu: Fix typo ("npxm") spi: Fix Tegra QSPI example spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ spi: cadence: fix platform_get_irq.cocci warning spi: Update NXP Flexspi maintainer details dt-bindings: mfd: maxim,max77802: Convert to dtschema ...
2022-03-18Merge tag 'iio-for-5.18a' of ↵Greg Kroah-Hartman41-266/+1504
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: First set of new device support, fixes, cleanups and features for IIO in 5.18 This cycle we had quite a few series that applied similar changes to lots of drivers. To keep this description manageable I have called those out in their own section rather than per driver. Particularly pleased to see the long running AFE precision series going in this cycle. Series includes some late breaking fixes. New device support * adi,ada4250 amplifier - New driver and dt bindings for this programmable gain amplifier. * adi,admv1014 microwave down-converter - New driver, dt bindings and some device specific ABI that may be generalized as more drivers for devices similar to this are added. * adi,admv4420 K Band down-converter. - New driver and dt bindings. * adi,adxl367 accelerometer driver. - New driver, dt-bindings + some new IIO ABI definitions to support reference magnitude events where an estimate of the acceleration due to gravity has been removed. - A few fixes as follow up patches. * adi,ltc2688 DAC with toggle and dither modes. - New driver and bindings. Includes some new driver specific (for now) ABI for handling toggle mode and the addition of a dither waveform to the DAC output. * AFE (analog front end) add support for additional types of analog device in front of an ADC. - RTD temperature sensors with dt bindings. - Temperature transducers wit dt bindings. - Related cleanup and features listed in other sections below. * maxim,ds3502 potentiometer. - Add support to ds1803 driver which required significant rework. * mediatek,mt2701-auxadc driver - Add mediatek,mt8186-auxadc - id table and chip specific info only. * semtech,sx9324, semtech,ax9360 - Substantial refactoring of sx9310 to extract core logic for reuse into a separate module - New driver using this supporting sx9324 proximity sensors. - New driver using this supporting sx9360 proximity sensors. * silan,sc7a20 - Compatible with the st,lis2dh (or nearly anyway) so add ID and chip specific info to enable support. Also silan vendor ID added for dt-bindings. Staging graduation * adi,ad7280a monitoring ADC for stacked lithium-ion batteries in electric cars and similar. - Substantial rework of driver required to bring inline with current IIO best practice. An unusual device in IIO so some interesting features we may see more of in future. Multiple driver/core cleanup - Use sysfs_emit() in simple locations where there is no path to change to various core created attributes. - Trivial white space fixes around inconsistency between space after { and before } in id tables. - Introduce new handling for fractional types to avoid repeated similar implementations. Use this in 3 drivers. Note this is also targeted at future use in the AFE driver and was motivated by discussions around the precision related work on that driver. - of related header cleanups - drop of*.h and add mod_devicetable.h as appropriate. - Move a number of symbol exports into IIO_* namespaces. Two categories, 1) Library used by multiple drivers e.g. st_sensors 2) Core driver module exporting functions used by bus specific modules. A few related cleanups in this set. - Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and similar to simplify drivers and take advantage of these new macros allowing the compiler to do the job or removing unused code without the need for __maybe_unused markings. Conversion of other drivers to these new macros ongoing. Features * adi,adf4350 - Switch from of specific to generic device properties enabling use with other firmware types. * adi,adx345 - Switch from of specific to generic device properties. - Add ACPI ID ADS0345 - Related driver cleanup. * adi,hmc425a - Switch from of specific to generic device properties. * afe analog rescaler driver - Wider range of types supported for scale. - Support offset. - Kunit tests. * atlas,ezo-sensor - Convert from of to device properties. * fsl,mma8452 - Support mount matrix. * infineon,dps310: - Add ACPI ID IFX3100. * invensense,mpu6050 - Convert to generic device properties. * maxim,ds1803 - Add out_raw_available before supporting more devices. - Convert from of specific to device properties. * samsung,ssp_sensors - Convert from of specific to device properties. * st,stm32-timer trigger - Convert from of specific to device properties. * ti,hdc101x - Add ACPI ID TXNW1010. * ti,tsc2046: - Add read_raw support to enable use of iio_hwmon and similar. Fixes / cleanup. * mailmap - Update for Cai Huoqing * MAINTAINERS - Fix Analog Devices related links. - Add entry for ADRF6780 - Add entry for ADMV1013 - Add entry for AD7293 - Add entry for ADMV8818 - Update files listed for adis-lib * iio core: - Fix wrong comment about current_mode being something a driver should ever access. - Use struct_size() rather than open coding in industrialio-hw-consumer * adi,axl355 - Use units.h definitions instead of local versions. * adi,adis-lib - Simplify *updated_bits() macro - Whitespace cleanup. * afe - Note many of these fixes only apply to particular configurations so the problems have probably not been seen in the wild, but will be visible with new usecases enabled this cycle. - Fix application of consumer scale for IIO_VAL_INT. - Apply a scale of 1 when no scale is provided. - Make best effort to establish a valid offset value for fractional cases. - Use s64 for scale calculations where parameters may be signed. - Tidy up include order. - Improve accuracy for small fractional sales - Reduce risk of integer overflow. * ams,as3935 - Use devm_delayed_work_autocancel() to replace open coded equivalent. * aspeed,adc - Fix wrong use of divider flag. * atmel,sama5d2-adc - Relax atmel,trigger-edge-type to optional. - Drop Ludovic Desroches from listed maintainers of the dt-binding inline with previous MAINTAINERS entry update. * fsl,mma8452 - Fix probing when i2c_device_id used. - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev. Use dev_to_iio_dev() instead. Note the original path in here worked more by luck than design. * invensense,mpu6050 - Drop ACPI_PTR() protection to avoid an unused warning. - Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to simplify handling. * motorola,cpcap-adc - Drop unused assignment. * qcom,spmi-adc - Fix wrong example of 'reg' in binding document. * renesas,rzg2l-adc - Trivial typo fix. * semtech,sx9360 - Fix wrong register handling for event generation. * st_sensors - Allow manual disabling of I2C or SPI module if not needed for a particular board. Default is still to enable the bus specific module if appropriate bus is supported. * st,lsm6dsx - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev. Use dev_to_iio_dev() instead. * ti,palmas-gpadc - Split the interrupt fields in the dt-binding example * ti,tsc2046 - Rework state machine to improve readability after recent debugging of an issue fixed elsewhere. - Add a sanity check to avoid very large memory allocations if a crazy delay is specified. * ti,twl6030 - Add error handling if devm_request_threaded_irq() fails. * xilinx,ams - Use devm_delayed_work_autocancel() instead of open coding equivalent. - Fix missing required clock entry in dt-binding. - Fix miss counting of channels resulting in ps channels not being enabled. - Fix incorrect values written to sequencer registers. - Fix sequence for single channel reading. * tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (245 commits) iio: adc: xilinx-ams: Fix single channel switching sequence iio: adc: xilinx-ams: Fixed wrong sequencer register settings iio: adc: xilinx-ams: Fixed missing PS channels dt-bindings: iio: adc: zynqmp_ams: Add clock entry iio: accel: mma8452: use the correct logic to get mma8452_data iio: adc: aspeed: Add divider flag to fix incorrect voltage reading. iio: imu: st_lsm6dsx: use dev_to_iio_dev() to get iio_dev struct dt-bindings: iio: Add ltc2688 documentation iio: ABI: add ABI file for the LTC2688 DAC iio: dac: add support for ltc2688 dt-bindings: iio: afe: add bindings for temperature transducers dt-bindings: iio: afe: add bindings for temperature-sense-rtd iio: afe: rescale: add temperature transducers iio: afe: rescale: add RTD temperature sensor support iio: test: add basic tests for the iio-rescale driver iio: afe: rescale: reduce risk of integer overflow iio: afe: rescale: fix accuracy for small fractional scales iio: afe: rescale: add offset support iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support iio: afe: rescale: expose scale processing function ...
2022-03-02iio: adc: xilinx-ams: Fix single channel switching sequenceRobert Hancock1-2/+8
Some of the AMS channels need to be read by switching into single-channel mode from the normal polling sequence. There was a logic issue in this switching code that could cause the first read of these channels to read back as zero. It appears that the sequencer should be set back to default mode before changing the channel selection, and the channel should be set before switching the sequencer back into single-channel mode. Also, write 1 to the EOC bit in the status register to clear it before waiting for it to become set, so that we actually wait for a new conversion to complete, and don't proceed based on a previous conversion completing. Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20220127173450.3684318-5-robert.hancock@calian.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-03-02iio: adc: xilinx-ams: Fixed wrong sequencer register settingsRobert Hancock1-2/+2
Register settings used for the sequencer configuration register were incorrect, causing some inputs to not be read properly. Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20220127173450.3684318-4-robert.hancock@calian.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-28 01:34:56 +0000