summaryrefslogtreecommitdiffstats
path: root/drivers/ide
AgeCommit message (Collapse)AuthorFilesLines
2009-01-09Merge branch 'linus' into releaseLen Brown70-2369/+1938
2009-01-06scc_pata: make use of scc_dma_sff_read_status()Sergei Shtylyov1-3/+3
Make consistent use of scc_dma_sff_read_status() throughout the driver. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide-dma-sff: factor out ide_dma_sff_write_status()Sergei Shtylyov1-21/+16
Factor out ide_dma_sff_write_status(), symmetric to ide_dma_sff_read_status(). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: move read_sff_dma_status() method to 'struct ide_dma_ops'Sergei Shtylyov22-40/+59
Move apparently misplaced read_sff_dma_status() method from 'struct ide_tp_ops' to 'struct ide_dma_ops', renaming it to dma_sff_read_status() and making only required for SFF-8038i compatible IDE controller drivers (greatly cutting down the number of initializers) as its only user (outside ide-dma-sff.c and such drivers) appears to be ide_pci_check_simplex() which is only called for such controllers... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: don't set hwif->dma_ops in init_dma() methodSergei Shtylyov3-6/+2
Replace setting of 'hwif->dma_ops' in the 'alim15x3' and 'palm_bk3710' drivers' init_dma() methods with initializing the corresponding member of their 'struct ide_port_info' instances and remove such setting from the 'hpt366' driver that just doesn't use 'sff_dma_ops'. Along with some code save, this prepares us for the next patch... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06Resurrect IT8172 IDE controller driverShane McDonald3-0/+174
Support for the IT8172 IDE controller was removed from the kernel sometime after 2.6.18. Support for the only boards that used the IT8172 was removed from the kernel after 2.6.18, as they had never compiled since 2.6.0. However, there are a couple of platforms that use this chip: the PMC-Sierra Xiao Hu thin-client computer, which is no longer in production, and the Linksys NSS4000 Network Attached Storage box, which is based on the Xiao Hu board. I am attempting to add support for the Xiao Hu to the kernel, and this IT8172 IDE controller is the first bit of code in this effort. This patch resurrects the IT8172 IDE controller code. I began with the 2.6.18 version of the it8172.c file, and have moved it forward so that it works with the latest version of the kernel. I have run this driver on a PMC-Sierra Xiao Hu board with the 2.6.28 kernel, and I have had no problems with it in my configuration. The attached patch applies cleanly against 2.6.28. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: alan@lxorguk.ukuu.org.uk [bart: s/HWIF(drive)/drive->hwif/] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06piix: sync ich_laptop[] with ata_piix.cBartlomiej Zolnierkiewicz1-0/+2
Allows UDMA > 33 on ACER TM290 and ACER Aspire 1694WLMi. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: fix ide_port_scan() to do ACPI setup after initializing request queuesBartlomiej Zolnierkiewicz1-1/+1
This makes ide_port_scan()'s behavior match ide_host_register()'s one and fixes OOPS in elv_may_queue() during port re-scan. Reported-and-tested-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove now redundant ->cur_dev checksBartlomiej Zolnierkiewicz1-61/+46
* ->cur_dev should now be always valid if ->handler is set so remove redundant checks from ide_intr() and ide_timer_expiry(). * Apply CodingStyle fixups in ide_timer_expiry() while at it. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove superfluous hwif variable assignment from ide_timer_expiry()Bartlomiej Zolnierkiewicz1-1/+0
There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: use ide_pci_is_in_compatibility_mode() helper in setup-pci.cBartlomiej Zolnierkiewicz1-2/+1
There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: make "paranoia" ->handler check in ide_intr() more strictBartlomiej Zolnierkiewicz1-6/+3
If ->handler is set while it shouldn't be it indicates deep problems so BUG_ON()-ning and preventing further damage is much more appropriate than merely printing an error message. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide-cd: convert to ide-atapi facilitiesBorislav Petkov2-95/+6
... and remove no longer needed cdrom_start_packet_command and cdrom_transfer_packet_command. Tested lightly with ide-cd and ide-floppy. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide-cd: start DMA before sending the actual packet commandBorislav Petkov1-3/+3
as it is done for all other IDE ATAPI devices. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide-cd: wait for DRQ to get set per defaultBorislav Petkov1-14/+7
... instead of assuming it is set for accelerated DRQ type devices. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: Fix drive's DWORD-IO handlingMario Schwalbe1-2/+1
According the documentation, id[ATA_ID_DWORD_IO] is non-zero if the drive supports dword IO, while the code disables support by setting IDE_DFLAG_NO_IO_32BIT. In addition, this word has been reused by the ATA8 specification. This patch fixes both cases. Signed-off-by: Mario Schwalbe <schwalbe@inf.tu-dresden.de> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> [bart: remove id[ATA_ID_DWORD_IO] check altogether per Sergei's suggestion] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: add port and host iteratorsBartlomiej Zolnierkiewicz6-83/+58
Add ide_port_for_each_dev() / ide_host_for_each_port() iterators and update IDE code to use them. While at it: - s/unit/i/ variable in ide_port_wait_ready(), ide_probe_port(), ide_port_tune_devices(), ide_port_init_devices_data(), do_reset1(), ide_acpi_set_state() and scc_dma_end() - s/d/i/ variable in ide_proc_port_register_devices() There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: dynamic allocation of device structuresBartlomiej Zolnierkiewicz6-31/+63
Allocate device structures dynamically instead of having them embedded in ide_hwif_t: * Remove needless zeroing of port structure from ide_init_port_data(). * Add ide_hwif_t.devices[MAX_DRIVES] (table of pointers to the devices). * Add ide_port_{alloc,free}_devices() helpers and use them respectively in ide_{host,free}_alloc(). * Convert all users of ->drives[] to use ->devices[] instead. While at it: * Use drive->dn for the slave device check in scc_pata.c. As a nice side-effect this patch cuts ~1kB (x86-32) from the resulting code size: text data bss dec hex filename 53963 1244 237 55444 d894 drivers/ide/ide-core.o.before 52981 1244 237 54462 d4be drivers/ide/ide-core.o.after Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: NUMA aware allocation of host and port structuresBartlomiej Zolnierkiewicz1-4/+5
kzalloc() -> kzalloc_node() in ide_host_alloc(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06it821x: use ide_get_pair_dev() helperBartlomiej Zolnierkiewicz1-6/+2
Because presence of the peer device was not checked in it821x_set_pio_mode() PIO0 mode was used for taskfile PIO in single device configurations. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06cmd64x: use ide_get_pair_dev() helperBartlomiej Zolnierkiewicz1-2/+4
There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06cmd640: use ide_get_pair_dev() helperBartlomiej Zolnierkiewicz1-3/+2
There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06amd74xx: use ide_get_pair_dev() helperBartlomiej Zolnierkiewicz1-2/+2
There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove ->error method from struct ide_driverBartlomiej Zolnierkiewicz4-14/+2
* Remove (now superfluous) ->error method from struct ide_driver. * Unexport __ide_error() and make it static. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: unexport ide_wait_not_busy()Bartlomiej Zolnierkiewicz1-3/+0
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove ide_driver_t typedefBartlomiej Zolnierkiewicz10-38/+38
While at it: - s/struct ide_driver_s/struct ide_driver/ - use to_ide_driver() macro in ide-proc.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove 'byte' typedefBartlomiej Zolnierkiewicz4-18/+18
Just use u8 instead, also s/__u8/u8/ in ide-cd.h while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove ide_pci_enablebit_t typedefBartlomiej Zolnierkiewicz1-1/+1
Remove needless parens while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove local_irq_set() macroBartlomiej Zolnierkiewicz2-2/+4
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove HWIF() macroBartlomiej Zolnierkiewicz34-101/+102
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: move ide_init_port_data() and friends to ide-probe.cBartlomiej Zolnierkiewicz2-146/+135
* Move IDE_DEFAULT_MAX_FAILURES to <linux/ide.h>. * Move ide_cfg_mtx, ide_hwif_to_major[], ide_port_init_devices_data(), ide_init_port_data(), ide_init_port_hw() and ide_unregister() to ide-probe.c from ide.c. * Make ide_unregister(), ide_init_port_data(), ide_init_port_hw() and ide_cfg_mtx static. While at it: * Remove stale ide_init_port_data() documentation and ide_lock extern. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: update ide_unregister() documentationBartlomiej Zolnierkiewicz1-13/+5
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: merge ide_hwgroup_t with ide_hwif_t (v2)Bartlomiej Zolnierkiewicz25-235/+164
* Merge ide_hwgroup_t with ide_hwif_t. * Cleanup init_irq() accordingly, then remove no longer needed ide_remove_port_from_hwgroup() and ide_ports[]. * Remove now unused HWGROUP() macro. While at it: * ide_dump_ata_error() fixups v2: * Fix ->quirk_list check in do_ide_request() (s/hwif->cur_dev/prev_port->cur_dev). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: use lock bitops for ports serialization (v2)Bartlomiej Zolnierkiewicz1-42/+63
* Add ->host_busy field to struct ide_host and use it's first bit together with lock bitops to provide new ports serialization method. * Convert core IDE code to use new ide_[un]lock_host() helpers. This removes the need for taking hwgroup->lock if host is already busy on serialized hosts and makes it possible to merge ide_hwgroup_t into ide_hwif_t (done in the later patch). * Remove no longer needed ide_hwgroup_t.busy and ide_[un]lock_hwgroup(). * Update do_ide_request() documentation. v2: * ide_release_lock() should be called inside IDE_HFLAG_SERIALIZE check. * Add ide_hwif_t.busy flag and ide_[un]lock_port() for serializing devices on a port. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove hwgroup->hwif and {drive,hwif}->nextBartlomiej Zolnierkiewicz2-90/+12
* Add 'int port_count' field to ide_hwgroup_t to keep the track of the number of ports in the hwgroup. Then update init_irq() and ide_remove_port_from_hwgroup() to use it. * Remove no longer needed hwgroup->hwif, {drive,hwif}->next, ide_add_drive_to_hwgroup() and ide_remove_drive_from_hwgroup() (hwgroup->drive now only denotes the currently active device in the hwgroup). * Update locking documentation in <linux/ide.h>. While at it: * Rename ->drive field in ide_hwgroup_t to ->cur_dev. * Use __func__ in ide_timer_expiry(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: use per-port IRQ handlersBartlomiej Zolnierkiewicz3-64/+32
Use hwif instead of hwgroup as {request,free}_irq()'s cookie, teach ide_intr() to return early for non-active serialized ports, modify unexpected_intr() accordingly and then use per-port IRQ handlers instead of per-hwgroup ones. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: add ->cur_port to struct ide_host and use it for serialized hostsBartlomiej Zolnierkiewicz1-10/+15
* Pass 'ide_hwif_t *' instead of 'ide_hwgroup_t *' to unexpected_intr(). * Cache pointer to the port currently being serviced in ->cur_port and use it instead of hwif->hwgroup on serialized hosts. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: fix setting nIEN on idle devicesBartlomiej Zolnierkiewicz1-4/+6
Fix do_ide_request() to operate on previous device / port instead of the current one. The original code was wrong since at least Feb 2002 (2.4.0 timeframe). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: fix LOCKDEP warningBartlomiej Zolnierkiewicz1-1/+0
commit 295f00042aaf6b553b5f37348f89bab463d4a469 ("ide: don't execute the next queued command from the hard-IRQ context") overlooked that ide_do_drive_cmd() (used for REQUEST SENSE command handling) may still invoke do_ide_request() (->request_fn) in the hard-IRQ context through blk_start_queueing(). This resulted in a LOCKDEP warning after commit b599bc7a1199419e122cb2e9ec6b0fa2cfbbc17b ("ide: use per-device request queue locks (v2)"). Since calling blk_start_queuing() in ide_do_drive_cmd() doesn't make much sense as the port is already marked as busy (so the execution of the new command will be deferred anyway) then just remove it fixing LOCKDEP warning and saving some CPU cycles at the same time. Reported-and-tested-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Grissiom <chaos.proton@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide-atapi: start dma in a drive-specific wayBorislav Petkov1-4/+11
There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide-atapi: put the rest of non-ide-cd code into the else-clause of ↵Borislav Petkov1-11/+11
ide_transfer_pc There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide-atapi: remove timeout arg to ide_issue_pcBorislav Petkov3-3/+8
There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide-cd: remove handler wrappersBorislav Petkov1-38/+11
Remove cdrom_do_newpc_cont and cdrom_start_rw_cont wrappers and pass cdrom_transfer_packet_command to ide_execute_command directly. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> [bart: don't move cdrom_start_packet_command() around, remove newlines] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide-cd: remove xferlen arg to cdrom_start_packet_commandBorislav Petkov1-5/+5
There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide-atapi: split drive-specific functionality in ide_issue_pcBorislav Petkov1-16/+20
There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide-atapi: assign expiry and timeout based on device typeBorislav Petkov1-13/+17
There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide-atapi: compute cmd_len based on device type in ide_transfer_pcBorislav Petkov1-1/+13
There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> [bart: move cmd_len check closer to ->output_data() call] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide: remove the last ide-scsi remnantsBorislav Petkov4-9/+2
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide-atapi: remove ide-scsi remnants from ide_pc_intr()Borislav Petkov1-55/+13
As a result, remove now unused ide_scsi_get_timeout and ide_scsi_expiry. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide-atapi: remove ide-scsi remnants from ide_transfer_pc()Borislav Petkov1-10/+4
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>