summaryrefslogtreecommitdiffstats
path: root/drivers/ide/ide-atapi.c
AgeCommit message (Collapse)AuthorFilesLines
2011-10-31ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where neededPaul Gortmaker1-0/+1
They were getting this implicitly by an include of module.h from device.h -- but we are going to clean that up and break that include chain, so include export.h explicitly now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-10block: remove per-queue pluggingJens Axboe1-2/+1
Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07block: fix some more cmd_type cleanup falloutChristoph Hellwig1-3/+3
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07block: remove wrappers for request type/flagsChristoph Hellwig1-7/+10
Remove all the trivial wrappers for the cmd_type and cmd_flags fields in struct requests. This allows much easier grepping for different request types instead of unwinding through macros. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-04-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide: Fix IDE taskfile with cfq scheduler ide: Must hold queue lock when requeueing ide: Requeue request after DMA timeout
2010-04-01ide: Must hold queue lock when requeueingHerbert Xu1-1/+1
ide-atapi requeues requests without holding the queue lock. This patch fixes it by using ide_requeue_and_plug. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-06-20Merge branch 'for-2.6.31' of ↵Linus Torvalds1-51/+87
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (34 commits) ide-cd: prevent null pointer deref via cdrom_newpc_intr ide: BUG() on unknown requests ide: filter out invalid DMA xfer mode changes in HDIO_DRIVE_CMD ioctl handler ide: do not access ide_drive_t 'drive_data' field directly sl82c105: implement test_irq() method siimage: implement test_irq() method pdc202xx_old: implement test_irq() method (take 2) cmd64x: implement test_irq() method cmd640: implement test_irq() method ide: move ack_intr() method into 'struct ide_port_ops' (take 2) ide: move IRQ clearing from ack_intr() method to clear_irq() method (take 2) siimage: use ide_dma_test_irq() (take 2) cmd64x: implement clear_irq() method (take 2) ide: call clear_irq() method in ide_timer_expiry() sgiioc4: coding style cleanup ide: don't enable IORDY at a probe time ide: IORDY handling fixes ata: add ata_id_pio_need_iordy() helper (v2) ide-tape: fix build issue ide: unify interrupt reason checking ...
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits) trivial: remove the trivial patch monkey's name from SubmittingPatches trivial: Fix a typo in comment of addrconf_dad_start() trivial: usb: fix missing space typo in doc trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug trivial: Remove the hyphen from git commands trivial: fix ETIMEOUT -> ETIMEDOUT typos trivial: Kconfig: .ko is normally not included in module names trivial: SubmittingPatches: fix typo trivial: Documentation/dell_rbu.txt: fix typos trivial: Fix Pavel's address in MAINTAINERS trivial: ftrace:fix description of trace directory trivial: unnecessary (void*) cast removal in sound/oss/msnd.c trivial: input/misc: Fix typo in Kconfig trivial: fix grammo in bus_for_each_dev() kerneldoc trivial: rbtree.txt: fix rb_entry() parameters in sample code trivial: spelling fix in ppc code comments trivial: fix typo in bio_alloc kernel doc trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt trivial: Miscellaneous documentation typo fixes trivial: fix typo milisecond/millisecond for documentation and source comments. ...
2009-06-13Merge branch 'bp-remove-pc-buf' into for-nextBartlomiej Zolnierkiewicz1-51/+87
Conflicts: drivers/ide/ide-tape.c
2009-06-12Merge branch 'for-2.6.31' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (29 commits) ide: re-implement ide_pci_init_one() on top of ide_pci_init_two() ide: unexport ide_find_dma_mode() ide: fix PowerMac bootup oops ide: skip probe if there are no devices on the port (v2) sl82c105: add printk() logging facility ide-tape: fix proc warning ide: add IDE_DFLAG_NIEN_QUIRK device flag ide: respect quirk_drives[] list on all controllers hpt366: enable all quirks for devices on quirk_drives[] list hpt366: sync quirk_drives[] list with pdc202xx_{new,old}.c ide: remove superfluous SELECT_MASK() call from do_rw_taskfile() ide: remove superfluous SELECT_MASK() call from ide_driveid_update() icside: remove superfluous ->maskproc method ide-tape: fix IDE_AFLAG_* atomic accesses ide-tape: change IDE_AFLAG_IGNORE_DSC non-atomically pdc202xx_old: kill resetproc() method pdc202xx_old: don't call pdc202xx_reset() on IRQ timeout pdc202xx_old: use ide_dma_test_irq() ide: preserve Host Protected Area by default (v2) ide-gd: implement block device ->set_capacity method (v2) ...
2009-06-12trivial: fix typo milisecond/millisecond for documentation and source comments.Martin Olsson1-1/+1
Signed-off-by: Martin Olsson <martin@minimum.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-11Merge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds1-6/+15
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits) block: add request clone interface (v2) floppy: fix hibernation ramdisk: remove long-deprecated "ramdisk=" boot-time parameter fs/bio.c: add missing __user annotation block: prevent possible io_context->refcount overflow Add serial number support for virtio_blk, V4a block: Add missing bounce_pfn stacking and fix comments Revert "block: Fix bounce limit setting in DM" cciss: decode unit attention in SCSI error handling code cciss: Remove no longer needed sendcmd reject processing code cciss: change SCSI error handling routines to work with interrupts enabled. cciss: separate error processing and command retrying code in sendcmd_withirq_core() cciss: factor out fix target status processing code from sendcmd functions cciss: simplify interface of sendcmd() and sendcmd_withirq() cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code cciss: Use schedule_timeout_uninterruptible in SCSI error handling code block: needs to set the residual length of a bidi request Revert "block: implement blkdev_readpages" block: Fix bounce limit setting in DM Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt ... Manually fix conflicts with tracing updates in: block/blk-sysfs.c drivers/ide/ide-atapi.c drivers/ide/ide-cd.c drivers/ide/ide-floppy.c drivers/ide/ide-tape.c include/trace/events/block.h kernel/trace/blktrace.c
2009-06-07ide-tape: change IDE_AFLAG_IGNORE_DSC non-atomicallyBorislav Petkov1-1/+1
There are two sites where the flag is being changed: ide_retry_pc and idetape_do_request. Both codepaths are protected by hwif->busy (ide_lock_port) and therefore we shouldn't need the atomic accesses. Spotted-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-15ide: unify interrupt reason checkingBorislav Petkov1-27/+68
Add ide_check_ireason() function that handles all ATAPI devices. Reorganize all unlikely cases in ireason checking further down in the code path. In addition, add PFX for printks originating from ide-atapi. Finally, remove ide_cd_check_ireason. Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15ide-atapi: remove pc->bufBorislav Petkov1-6/+0
Now after all users of pc->buf have been converted, remove the 64B buffer embedded in each packet command. There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15ide-atapi: use local sense bufferBorislav Petkov1-1/+3
Access the sense buffer through the bio in ->pc_callback method thus alleviating the need for the pc->buf pointer. There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15ide-atapi: add a buffer-arg to ide_queue_pc_tailBorislav Petkov1-6/+6
This is in preparation of removing ide_atapi_pc. Expose the buffer as an argument to ide_queue_pc_tail with later replacing it with local buffer or even kmalloc'ed one if needed due to stack usage constraints. Also, add the possibility of passing a NULL-ptr buffer for cmds which don't transfer data besides the cdb. While at it, switch to local buffer in idetape_get_mode_sense_results(). There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15ide-atapi: add a len-parameter to ide_queue_pc_tailBorislav Petkov1-6/+6
This is in preparation for removing ide_atapi_pc. There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15ide-atapi: switch to rq->resid_lenBorislav Petkov1-11/+8
Now that we have rq->resid_len, use it to account partial completion amount during the lifetime of an rq, decrementing it on each successful transfer. As a result, get rid of now unused pc->xferred. While at it, remove noisy debug call in ide_prep_sense. Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15ide-atapi: switch to blk_rq_bytes() on do_request() pathBorislav Petkov1-5/+7
After the recent struct request cleanups, blk_rq_bytes() is guaranteed to be valid and is the current total length of the rq's bio. Use that instead of pc->req_xfer in the do_request() path after the command has been queued The remaining usage of pc->req_xfer now is only until we map the rq to a bio. While at it: - remove local caching of rq completion length in ide_tape_issue_pc() Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-11block: implement and enforce request peek/start/fetchTejun Heo1-1/+1
Till now block layer allowed two separate modes of request execution. A request is always acquired from the request queue via elv_next_request(). After that, drivers are free to either dequeue it or process it without dequeueing. Dequeue allows elv_next_request() to return the next request so that multiple requests can be in flight. Executing requests without dequeueing has its merits mostly in allowing drivers for simpler devices which can't do sg to deal with segments only without considering request boundary. However, the benefit this brings is dubious and declining while the cost of the API ambiguity is increasing. Segment based drivers are usually for very old or limited devices and as converting to dequeueing model isn't difficult, it doesn't justify the API overhead it puts on block layer and its more modern users. Previous patches converted all block low level drivers to dequeueing model. This patch completes the API transition by... * renaming elv_next_request() to blk_peek_request() * renaming blkdev_dequeue_request() to blk_start_request() * adding blk_fetch_request() which is combination of peek and start * disallowing completion of queued (not started) requests * applying new API to all LLDs Renamings are for consistency and to break out of tree code so that it's apparent that out of tree drivers need updating. [ Impact: block request issue API cleanup, no functional change ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Mike Miller <mike.miller@hp.com> Cc: unsik Kim <donari75@gmail.com> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: David S. Miller <davem@davemloft.net> Cc: Laurent Vivier <Laurent@lvivier.info> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Stefan Weinhuber <wein@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11ide: dequeue in-flight requestTejun Heo1-2/+12
ide generally has single request in flight and tracks it using hwif->rq and all state handlers follow the following convention. * ide_started is returned if the request is in flight. * ide_stopped is returned if the queue needs to be restarted. The request might or might not have been processed fully or partially. * hwif->rq is set to NULL, when an issued request completes. So, dequeueing model can be implemented by dequeueing after fetch, requeueing if hwif->rq isn't NULL on ide_stopped return and doing about the same thing on completion / port unlock paths. These changes can be made in ide-io proper. In addition to the above main changes, the following updates are necessary. * ide-cd shouldn't dequeue a request when issuing REQUEST SENSE for it as the request is already dequeued. * ide-atapi uses request queue as stack when issuing REQUEST SENSE to put the REQUEST SENSE in front of the failed request. This now needs to be done using requeueing. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11ide: cleanup rq->data_len usagesTejun Heo1-2/+2
With recent unification of fields, it's now guaranteed that rq->data_len always equals blk_rq_bytes(). Convert all direct users to accessors. [ Impact: convert direct rq->data_len usages to blk_rq_bytes() ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11block: add rq->resid_lenTejun Heo1-8/+1
rq->data_len served two purposes - the length of data buffer on issue and the residual count on completion. This duality creates some headaches. First of all, block layer and low level drivers can't really determine what rq->data_len contains while a request is executing. It could be the total request length or it coulde be anything else one of the lower layers is using to keep track of residual count. This complicates things because blk_rq_bytes() and thus [__]blk_end_request_all() relies on rq->data_len for PC commands. Drivers which want to report residual count should first cache the total request length, update rq->data_len and then complete the request with the cached data length. Secondly, it makes requests default to reporting full residual count, ie. reporting that no data transfer occurred. The residual count is an exception not the norm; however, the driver should clear rq->data_len to zero to signify the normal cases while leaving it alone means no data transfer occurred at all. This reverse default behavior complicates code unnecessarily and renders block PC on some drivers (ide-tape/floppy) unuseable. This patch adds rq->resid_len which is used only for residual count. While at it, remove now unnecessasry blk_rq_bytes() caching in ide_pc_intr() as rq->data_len is not changed anymore. Boaz : spotted missing conversion in osd Sergei : spotted too early conversion to blk_rq_bytes() in ide-tape [ Impact: cleanup residual count handling, report 0 resid by default ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mike Miller <mike.miller@hp.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: Mike Miller <mike.miller@hp.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Darrick J. Wong <djwong@us.ibm.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-28ide-atapi: kill unused fields and callbacksTejun Heo1-13/+4
Impact: remove fields and code paths which are no longer necessary Now that ide-tape uses standard mechanisms to transfer data, special case handling for bh handling can be dropped from ide-atapi. Drop the followings. * pc->cur_pos, b_count, bh and b_data * drive->pc_update_buffers() and pc_io_buffers(). Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28ide-tape: use standard data transfer mechanismTejun Heo1-5/+1
Impact: use standard way to transfer data ide-tape uses rq in an interesting way. For r/w requests, rq->special is used to carry a private buffer management structure idetape_bh and rq->nr_sectors and current_nr_sectors are initialized to the number of idetape blocks which isn't necessary 512 bytes. Also, rq->current_nr_sectors is used to report back the residual count in units of idetape blocks. This peculiarity taxes both block layer and ide. ide-atapi has different paths and hooks to accomodate it and what a rq means becomes quite confusing and making changes at the block layer becomes quite difficult and error-prone. This patch makes ide-tape use bio instead. With the previous patch, ide-tape currently is using single contiguos buffer so replacing it isn't difficult. Data buffer is mapped into bio using blk_rq_map_kern() in idetape_queue_rw_tail(). idetape_io_buffers() and idetape_update_buffers() are dropped and pc->bh is set to null to tell ide-atapi to use standard data transfer mechanism and idetape_bh byte counts are updated by the issuer on completion using the residual count. This change also nicely removes the FIXME in ide_pc_intr() where ide-tape rqs need to be completed using ide_rq_bytes() instead of blk_rq_bytes() (although this didn't really matter as the request didn't have bio). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <jens.axboe@oracle.com>
2009-04-28ide-atapi,tape,floppy: allow ->pc_callback() to change rq->data_lenTejun Heo1-6/+10
Impact: allow residual count implementation in ->pc_callback() rq->data_len has two duties - carrying the number of input bytes on issue and carrying residual count back to the issuer on completion. ide-atapi completion callback ->pc_callback() is the right place to do this but currently ide-atapi depends on rq->data_len carrying the original request size after calling ->pc_callback() to complete the pc request. This patch makes ide_pc_intr(), ide_tape_issue_pc() and ide_floppy_issue_pc() cache length to complete before calling ->pc_callback() so that it can modify rq->data_len as necessary. Note: As using rq->data_len for two purposes can make cases like this incorrect in subtle ways, future changes will introduce separate field for residual count. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <jens.axboe@oracle.com>
2009-04-28ide-cd,atapi: use bio for internal commandsTejun Heo1-21/+31
Impact: unify request data buffer handling rq->data is used mostly to pass kernel buffer through request queue without using bio. There are only a couple of places which still do this in kernel and converting to bio isn't difficult. This patch converts ide-cd and atapi to use bio instead of rq->data for request sense and internal pc commands. With previous change to unify sense request handling, this is relatively easily achieved by adding blk_rq_map_kern() during sense_rq prep and PC issue. If blk_rq_map_kern() fails for sense, the error is deferred till sense issue and aborts the failed command which triggered the sense. Note that this is a slim possibility as sense prep is done on each command issue, so for the above condition to actually trigger, all preps since the last sense issue till the issue of the request which would require a sense should fail. * do_request functions might sleep now. This should be okay as ide request_fn - do_ide_request() - is invoked only from make_request and plug work. Make sure this is the case by adding might_sleep() to do_ide_request(). * Functions which access the read sense data before the sense request is complete now should access bio_data(sense_rq->bio) as the sense buffer might have been copied during blk_rq_map_kern(). * ide-tape updated to map sg. * cdrom_do_block_pc() now doesn't have to deal with REQ_TYPE_ATA_PC special case. Simplified. * tp_ops->output/input_data path dropped from ide_pc_intr(). Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28ide-atapi: convert ide-{floppy,tape} to using preallocated sense bufferBorislav Petkov1-34/+14
Since we're issuing REQ_TYPE_SENSE now we need to allow those types of rqs in the ->do_request callbacks. As a future improvement, sense_len assignment might be unified across all ATAPI devices. Borislav to check with specs and test. As a result, get rid of ide_queue_pc_head() and drive->request_sense_rq. tj: * Init request sense ide_atapi_pc from sense request. In the longer timer, it would probably better to fold ide_create_request_sense_cmd() into its only current user - ide_floppy_get_format_progress(). * ide_retry_pc() no longer takes @disk. CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28ide: add helpers for preparing sense requestsBorislav Petkov1-0/+61
This is in preparation of removing the queueing of a sense request out of the IRQ handler path. Use struct request_sense as a general sense buffer for all ATAPI devices ide-{floppy,tape,cd}. tj: * blk_get_request(__GFP_WAIT) can't be called from do_request() as it can cause deadlock. Converted to use inline struct request and blk_rq_init(). * Added xfer / cdb len selection depending on device type. * All sense prep logics folded into ide_prep_sense() which never fails. * hwif->rq clearing and sense_rq used handling moved into ide_queue_sense_rq(). * blk_rq_map_kern() conversion is moved to later patch. CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-28ide-atapi: don't abuse rq->bufferTejun Heo1-2/+2
Impact: rq->buffer usage cleanup ide-atapi uses rq->buffer as private opaque value for internal special requests. rq->special isn't used for these cases (the only case where rq->special is used is for ide-tape rw requests). Use rq->special instead. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk>
2009-04-19ide-atapi: kill unused fields and callbacksTejun Heo1-13/+4
Impact: remove fields and code paths which are no longer necessary Now that ide-tape uses standard mechanisms to transfer data, special case handling for bh handling can be dropped from ide-atapi. Drop the followings. * pc->cur_pos, b_count, bh and b_data * drive->pc_update_buffers() and pc_io_buffers(). Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19ide-tape: use standard data transfer mechanismTejun Heo1-5/+1
Impact: use standard way to transfer data ide-tape uses rq in an interesting way. For r/w requests, rq->special is used to carry a private buffer management structure idetape_bh and rq->nr_sectors and current_nr_sectors are initialized to the number of idetape blocks which isn't necessary 512 bytes. Also, rq->current_nr_sectors is used to report back the residual count in units of idetape blocks. This peculiarity taxes both block layer and ide. ide-atapi has different paths and hooks to accomodate it and what a rq means becomes quite confusing and making changes at the block layer becomes quite difficult and error-prone. This patch makes ide-tape use bio instead. With the previous patch, ide-tape currently is using single contiguos buffer so replacing it isn't difficult. Data buffer is mapped into bio using blk_rq_map_kern() in idetape_queue_rw_tail(). idetape_io_buffers() and idetape_update_buffers() are dropped and pc->bh is set to null to tell ide-atapi to use standard data transfer mechanism and idetape_bh byte counts are updated by the issuer on completion using the residual count. This change also nicely removes the FIXME in ide_pc_intr() where ide-tape rqs need to be completed using ide_rq_bytes() instead of blk_rq_bytes() (although this didn't really matter as the request didn't have bio). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <jens.axboe@oracle.com>
2009-04-19ide-atapi,tape,floppy: allow ->pc_callback() to change rq->data_lenTejun Heo1-6/+10
Impact: allow residual count implementation in ->pc_callback() rq->data_len has two duties - carrying the number of input bytes on issue and carrying residual count back to the issuer on completion. ide-atapi completion callback ->pc_callback() is the right place to do this but currently ide-atapi depends on rq->data_len carrying the original request size after calling ->pc_callback() to complete the pc request. This patch makes ide_pc_intr(), ide_tape_issue_pc() and ide_floppy_issue_pc() cache length to complete before calling ->pc_callback() so that it can modify rq->data_len as necessary. Note: As using rq->data_len for two purposes can make cases like this incorrect in subtle ways, future changes will introduce separate field for residual count. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <jens.axboe@oracle.com>
2009-04-19ide-cd,atapi: use bio for internal commandsTejun Heo1-21/+31
Impact: unify request data buffer handling rq->data is used mostly to pass kernel buffer through request queue without using bio. There are only a couple of places which still do this in kernel and converting to bio isn't difficult. This patch converts ide-cd and atapi to use bio instead of rq->data for request sense and internal pc commands. With previous change to unify sense request handling, this is relatively easily achieved by adding blk_rq_map_kern() during sense_rq prep and PC issue. If blk_rq_map_kern() fails for sense, the error is deferred till sense issue and aborts the failed command which triggered the sense. Note that this is a slim possibility as sense prep is done on each command issue, so for the above condition to actually trigger, all preps since the last sense issue till the issue of the request which would require a sense should fail. * do_request functions might sleep now. This should be okay as ide request_fn - do_ide_request() - is invoked only from make_request and plug work. Make sure this is the case by adding might_sleep() to do_ide_request(). * Functions which access the read sense data before the sense request is complete now should access bio_data(sense_rq->bio) as the sense buffer might have been copied during blk_rq_map_kern(). * ide-tape updated to map sg. * cdrom_do_block_pc() now doesn't have to deal with REQ_TYPE_ATA_PC special case. Simplified. * tp_ops->output/input_data path dropped from ide_pc_intr(). Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19ide-atapi: convert ide-{floppy,tape} to using preallocated sense bufferBorislav Petkov1-34/+14
Since we're issuing REQ_TYPE_SENSE now we need to allow those types of rqs in the ->do_request callbacks. As a future improvement, sense_len assignment might be unified across all ATAPI devices. Borislav to check with specs and test. As a result, get rid of ide_queue_pc_head() and drive->request_sense_rq. tj: * Init request sense ide_atapi_pc from sense request. In the longer timer, it would probably better to fold ide_create_request_sense_cmd() into its only current user - ide_floppy_get_format_progress(). * ide_retry_pc() no longer takes @disk. CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19ide: add helpers for preparing sense requestsBorislav Petkov1-0/+61
This is in preparation of removing the queueing of a sense request out of the IRQ handler path. Use struct request_sense as a general sense buffer for all ATAPI devices ide-{floppy,tape,cd}. tj: * blk_get_request(__GFP_WAIT) can't be called from do_request() as it can cause deadlock. Converted to use inline struct request and blk_rq_init(). * Added xfer / cdb len selection depending on device type. * All sense prep logics folded into ide_prep_sense() which never fails. * hwif->rq clearing and sense_rq used handling moved into ide_queue_sense_rq(). * blk_rq_map_kern() conversion is moved to later patch. CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-04-19ide-atapi: don't abuse rq->bufferTejun Heo1-2/+2
Impact: rq->buffer usage cleanup ide-atapi uses rq->buffer as private opaque value for internal special requests. rq->special isn't used for these cases (the only case where rq->special is used is for ide-tape rw requests). Use rq->special instead. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk>
2009-04-08ide: refactor tf_read() methodSergei Shtylyov1-13/+8
Simplify tf_read() method, making it deal only with 'struct ide_taskfile' and the validity flags that the upper layer passes, and factoring out the code that deals with the high order bytes into ide_tf_readback() to be called from the only two functions interested, ide_complete_cmd() and ide_dump_sector(). This should stop the needless code duplication in this method and so make it about twice smaller than it was; along with simplifying the setup for the method call, this should save both time and space... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide: replace IDE_TFLAG_* flags by IDE_VALID_*Sergei Shtylyov1-11/+10
Replace IDE_TFLAG_{IN|OUT}_* flags meaning to the taskfile register validity on input/output by the IDE_VALID_* flags and introduce 4 symmetric 8-bit register validity indicator subfields, 'valid.{input/output}.{tf|hob}', into the 'struct ide_cmd' instead of using the 'tf_flags' field for that purpose (this field can then be turned from 32-bit into 8-bit one). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31ide-floppy: do not complete rq's prematurelyBorislav Petkov1-7/+6
... and access them afterwards. Simplify rq completing code while at it. Spotted-by: Tejun Heo <tj@kernel.org> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31ide-floppy: use ide_pio_bytes()Bartlomiej Zolnierkiewicz1-52/+16
* Fix ide_init_sg_cmd() setup for non-fs requests. * Convert ide_pc_intr() to use ide_pio_bytes() for floppy media. * Remove no longer needed ide_io_buffers() and sg/sg_cnt fields from struct ide_atapi_pc. * Remove partial completions; kill idefloppy_update_buffers(), as a result. * Add some more debugging statements. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31ide-{floppy,tape}: fix padding for PIO transfersBartlomiej Zolnierkiewicz1-38/+19
* Return number of bytes left to transfer from idetape_{in,out}put_buffers() and number of bytes done from ide_tape_io_buffers(). * Fix padding for PIO transfers in ide_pc_intr() so read/write buffers are always completely processed and then the transfer is padded if necessary. * Remove invalid error messages. * Remove now superfluous padding from ide{_io_buffers,tape_input_buffers}(). While at it: * Set pc->bh to NULL in idetape_input_buffers() after all bh-s are done. * Cache !!(pc->flags & PC_FLAG_WRITING) in local variable in ide_pc_intr(). Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31ide: sanitize ide_build_sglist() and ide_destroy_dmatable()Bartlomiej Zolnierkiewicz1-1/+2
* Move ide_map_sg() calls out from ide_build_sglist() to ide_dma_prepare(). * Pass command to ide_destroy_dmatable(). * Rename ide_build_sglist() to ide_dma_map_sg() and ide_destroy_dmatable() to ide_dma_unmap_sg(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31ide: set/clear drive->waiting_for_dma flag in the core codeBartlomiej Zolnierkiewicz1-1/+3
Set/clear drive->waiting_for_dma flag in the core code instead of in ->dma_setup and ->dma_end methods. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31ide: add ide_dma_prepare() helperBartlomiej Zolnierkiewicz1-14/+4
* Add ide_dma_prepare() helper. * Convert ide_issue_pc() and do_rw_taskfile() to use it. * Make ide_build_sglist() static. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31ide: destroy DMA mappings after ending DMA (v2)Bartlomiej Zolnierkiewicz1-2/+5
Move ide_destroy_dmatable() call out from ->dma_end method to {ide_pc,cdrom_newpc,ide_dma}_intr(), ide_dma_timeout_retry() and sgiioc4_resetproc(). This causes minor/safe behavior changes w.r.t.: * cmd64x.c::cmd64{8,x}_dma_end() * cs5536.c::cs5536_dma_end() * icside.c::icside_dma_end() * it821x.c::it821x_dma_end() * scc_pata.c::__scc_dma_end() * sl82c105.c::sl82c105_dma_end() * tx4939ide.c::tx4939ide_dma_end() v2: * Fix build for CONFIG_BLK_DEV_IDEDMA=n (reported by Randy Dunlap). Cc: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31ide-atapi: start DMA after issuing a packet commandBorislav Petkov1-4/+4
Apparently¹, some ATAPI devices want to see the packet command first before enabling DMA otherwise they simply hang indefinitely. Reorder the two steps and start DMA only after having issued the command first. [1] http://marc.info/?l=linux-kernel&m=123835520317235&w=2 Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Reported-by: Michael Roth <mroth@nessie.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31ide: drivers/ide/ide-atapi.c needs <linux/scatterlist.h>Geert Uytterhoeven1-0/+2
On m68k: | drivers/ide/ide-atapi.c: In function 'ide_io_buffers': | drivers/ide/ide-atapi.c:87: error: implicit declaration of function 'sg_page' | drivers/ide/ide-atapi.c:87: warning: passing argument 1 of 'PageHighMem' makes pointer from integer without a cast | drivers/ide/ide-atapi.c:91: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast | drivers/ide/ide-atapi.c:96: error: implicit declaration of function 'sg_virt' | drivers/ide/ide-atapi.c:96: warning: assignment makes pointer from integer without a cast | drivers/ide/ide-atapi.c:107: error: implicit declaration of function 'sg_next' | drivers/ide/ide-atapi.c:107: warning: assignment makes pointer from integer without a cast [bart: Dmitri Vorobiev submitted similar patch fixing MIPS] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Dmitri Vorobiev <dmitri.vorobiev@movial.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>