summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar2-1/+3
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-25Merge branch 'i2c/for-4.11' of ↵Linus Torvalds31-41/+1555
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has for you two new drivers (Tegra BPMP and STM32F4), interrupt support for pca954x muxes, and a bunch of driver bugfixes and improvements. Nothing really special this cycle. A few commits have been added to my tree just recently. Those are the Tegra BPMP driver and a few straightforward bugfixes or cleanups which I prefer to have upstream rather soonish. The rest had proper linux-next exposure" * 'i2c/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (25 commits) i2c: thunderx: Replace pci_enable_msix() i2c: exynos5: fix arbitration lost handling i2c: exynos5: disable fifo-almost-empty irq signal when necessary i2c: at91: ensure state is restored after suspending i2c: bcm2835: Avoid possible NULL ptr dereference i2c: Add Tegra BPMP I2C proxy driver dt-bindings: Add Tegra186 BPMP I2C binding misc: eeprom: at24: use device_property_*() functions instead of of_get_property() i2c: mux: pca954x: Add interrupt controller support dt: bindings: i2c-mux-pca954x: Add documentation for interrupt controller i2c: mux: pca954x: Add missing pca9542 definition to chip_desc i2c: riic: correctly finish transfers i2c: i801: Add support for Intel Gemini Lake i2c: mux: pca9541: Export OF device ID table as module aliases i2c: mux: pca954x: Export OF device ID table as module aliases i2c: mux: mlxcpld: remove unused including <linux/version.h> i2c: busses: constify i2c_algorithm structures i2c: i2c-mux-gpio: rename i2c-gpio-mux to i2c-mux-gpio i2c: sh_mobile: document support for r8a7796 (R-Car M3-W) i2c: i2c-cros-ec-tunnel: Reduce logging noise ...
2017-02-23i2c: thunderx: Replace pci_enable_msix()Jan Glauber2-7/+3
Using pci_alloc_irq_vectors() instead of the deprecated pci_enable_msix() allows to remove the msix_entry from struct octeon_i2c and thus to get rid of the config symbol check. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-23i2c: exynos5: fix arbitration lost handlingAndrzej Hajda1-1/+26
In case of arbitration lost adequate interrupt sometimes is not signaled. As a result transfer timeouts and is not retried, as it should. To avoid such cases code is added to check transaction status in case of every interrupt. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-23i2c: exynos5: disable fifo-almost-empty irq signal when necessaryAndrzej Hajda1-1/+6
Fifo-almost-empty irq signal should be disabled as soon as possible, to avoid unnecessary interrupt storm. The best moment is when there is no more data to feed fifo. This patch fixes system stalls caused by IRQ storm. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-20Merge tag 'device-properties-4.11-rc1' of ↵Linus Torvalds1-1/+15
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device property updates from Rafael J. Wysocki: "Generic device properties framework updates for v4.11-rc1 Allow built-in (static) device properties to be declared as constant, make it possible to save memory by discarding alternative (but unused) built-in (static) property sets and add support for automatic handling of built-in properties to the I2C code" * tag 'device-properties-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: i2c: allow specify device properties in i2c_board_info device property: export code duplicating array of property entries device property: constify property arrays values device property: allow to constify properties
2017-02-20Merge tag 'acpi-4.11-rc1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20170119, which among other things updates copyright notices in all of the ACPICA files, fix a couple of issues in the ACPI EC and button drivers, fix modalias handling for non-discoverable devices with DT-compatible identification strings, add a suspend quirk for one platform and fix a message in the APEI code. Specifics: - Update of the ACPICA code in the kernel to upstream revision 20170119 including: + Fixes related to the handling of the bit width and bit offset fields in Generic Address Structure (Lv Zheng) + ACPI resources handling fix related to invalid resource descriptors (Bob Moore) + Fix to enable implicit result conversion for several ASL library functions (Bob Moore) + Support for method invocations as target operands in AML (Bob Moore) + Fix to use a correct operand type for DeRefOf() in some situations (Bob Moore) + Utilities updates (Bob Moore, Lv Zheng) + Disassembler/debugger updates (David Box, Lv Zheng) + Build fixes (Colin Ian King, Lv Zheng) + Update of copyright notices in all files (Bob Moore) - Fix for modalias handling for SPI and I2C devices with DT-compatible identification strings (Dan O'Donovan) - Fixes for the ACPI EC and button drivers (Lv Zheng) - ACPI processor handling fix related to CPU hotplug (online/offline) on x86 (Vitaly Kuznetsov) - Suspend quirk to save/restore NVS memory over S3 transitions for Lenovo G50-45 (Zhang Rui) - Message formatting fix for the ACPI APEI code (Colin Ian King)" * tag 'acpi-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) ACPICA: Update version to 20170119 ACPICA: Tools: Update common signon, remove compilation bit width ACPICA: Source tree: Update copyright notices to 2017 ACPICA: Linuxize: Restore and fix Intel compiler build x86/ACPI: keep x86_cpu_to_acpiid mapping valid on CPU hotplug spi: acpi: Initialize modalias from of_compatible i2c: acpi: Initialize info.type from of_compatible ACPI / bus: Introduce acpi_of_modalias() equiv of of_modalias_node() ACPI: save NVS memory for Lenovo G50-45 ACPI, APEI, EINJ: fix malformed newline escape ACPI / button: Remove lid_init_state=method mode ACPI / button: Change default behavior to lid_init_state=open ACPI / EC: Use busy polling mode when GPE is not enabled ACPI / EC: Remove old CLEAR_ON_RESUME quirk ACPICA: Update version to 20161222 ACPICA: Parser: Update parse info table for some operators ACPICA: Fix a problem with recent extra support for control method invocations ACPICA: Parser: Allow method invocations as target operands ACPICA: Fix for implicit result conversion for the ToXXX functions ACPICA: Resources: Not a valid resource if buffer length too long ..
2017-02-20i2c: at91: ensure state is restored after suspendingAlexandre Belloni1-0/+3
When going to suspend, the I2C registers may be lost because the power to VDDcore is cut. Restore them when resuming. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-20i2c: bcm2835: Avoid possible NULL ptr dereferenceStefan Wahren1-1/+3
Since commit e2474541032d ("bcm2835: Fix hang for writing messages larger than 16 bytes") the interrupt handler is prone to a possible NULL pointer dereference. This could happen if an interrupt fires before curr_msg is set by bcm2835_i2c_xfer_msg() and randomly occurs on the RPi 3. Even this is an unexpected behavior the driver must handle that with an error instead of a crash. Reported-by: Peter Robinson <pbrobinson@gmail.com> Fixes: e2474541032d ("bcm2835: Fix hang for writing messages larger than 16 bytes") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-20i2c: Add Tegra BPMP I2C proxy driverShardar Shariff Md3-0/+358
Add Tegra BPMP I2C driver. The BPMP is the boot and power management processor embedded in Tegra SoCs. In newer SoC versions, access to one of the I2C busses goes via the BPMP, requiring a different "proxy" I2C driver that accesses the bus via the real I2C driver embedded in the BPMP firmware. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-20Merge branches 'acpi-bus', 'acpi-sleep' and 'acpi-processor'Rafael J. Wysocki1-1/+2
* acpi-bus: spi: acpi: Initialize modalias from of_compatible i2c: acpi: Initialize info.type from of_compatible ACPI / bus: Introduce acpi_of_modalias() equiv of of_modalias_node() * acpi-sleep: ACPI: save NVS memory for Lenovo G50-45 * acpi-processor: x86/ACPI: keep x86_cpu_to_acpiid mapping valid on CPU hotplug
2017-02-14Revert "i2c: designware: detect when dynamic tar update is possible"Jarkko Nikula2-35/+11
This reverts commit 63d0f0a6952a1a02bc4f116b7da7c7887e46efa3. It caused a regression on platforms where I2C controller is synthesized with dynamic TAR update disabled. Detection code is testing is bit DW_IC_CON_10BITADDR_MASTER in register DW_IC_CON read-only but fails to restore original value in case bit is read-write. Instead of fixing this we revert the commit since it was preparation for the commit 0317e6c0f1dc ("i2c: designware: do not disable adapter after transfer") which was also reverted. Reported-by: Shah Nehal-Bakulchandra <Nehal-bakulchandra.Shah@amd.com> Reported-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Acked-By: Lucas De Marchi <lucas.demarchi@intel.com> Cc: <stable@vger.kernel.org> # v4.9+ Fixes: 63d0f0a6952a ("i2c: designware: detect when dynamic tar update is possible") Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-10Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into ↵Wolfram Sang1-4/+146
i2c/for-4.11
2017-02-10i2c: mux: pca954x: Add interrupt controller supportPhil Reid1-2/+139
Various muxes can aggregate multiple interrupts from each i2c bus. All of the muxes with interrupt support combine the active low irq lines using an internal 'and' function and generate a combined active low output. The muxes do provide the ability to read a control register to determine which irq is active. By making the mux an irq controller isr latency can potentially be reduced by reading the status register and then only calling the registered isr on that bus segment. As there is no irq masking on the mux irq are disabled until irq_unmask is called at least once. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Peter Rosin <peda@axentia.se>
2017-02-10i2c: mux: pca954x: Add missing pca9542 definition to chip_descPhil Reid1-2/+7
The spec for the pca954x was missing. This chip is the same as the pca9540 except that it has interrupt lines. While the i2c_device_id table mapped the pca9542 to the pca9540 definition the compatible table did not. In preparation for irq support add the pca9542 definition. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Peter Rosin <peda@axentia.se>
2017-02-09i2c: riic: correctly finish transfersChris Brandt1-7/+23
This fixes the condition where the controller has not fully completed its final transfer and leaves the bus and controller in a undesirable state. At the end of the last transmitted byte, the existing driver would just signal for a STOP condition to be transmitted then immediately signal completion. However, the full STOP procedure might not have fully taken place by the time the runtime PM shuts off the peripheral clock, leaving the bus in a suspended state. Alternatively, the STOP condition on the bus may have completed, but when the next transaction is requested by the upper layer, not all the necessary register cleanup was finished from the last transfer which made the driver return BUS BUSY when it really wasn't. This patch now makes all transmit and receive transactions wait for the STOP condition to fully complete before signaling a completed transaction. With this new method, runtime PM no longer seems to be an issue. Fixes: 310c18a41450 ("i2c: riic: add driver") Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-09i2c: i801: Add support for Intel Gemini LakeMika Westerberg2-0/+4
Intel Gemini Lake has the same SMBus host controller than Intel Broxton. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-09i2c: mux: pca9541: Export OF device ID table as module aliasesJavier Martinez Canillas1-0/+1
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the device was registered via OF, this means that exporting the OF device ID table device aliases in the module is not needed. But in order to change how the core reports modaliases to user-space, it's better to export it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-09i2c: mux: pca954x: Export OF device ID table as module aliasesJavier Martinez Canillas1-0/+1
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the device was registered via OF, this means that exporting the OF device ID table device aliases in the module is not needed. But in order to change how the core reports modaliases to user-space, it's better to export it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-09i2c: mux: mlxcpld: remove unused including <linux/version.h>Wei Yongjun1-1/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-09i2c: piix4: Request the SMBUS semaphore inside the mutexRicardo Ribalda1-5/+7
SMBSLVCNT must be protected with the piix4_mutex_sb800 in order to avoid multiple buses accessing to the semaphore at the same time. Fixes: 701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC") Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-09i2c: piix4: Fix request_region sizeRicardo Ribalda1-1/+1
Since '701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC")' we are using the SMBSLVCNT register at offset 0x8. We need to request it. Fixes: 701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC") Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-09i2c: busses: constify i2c_algorithm structuresBhumika Goyal14-14/+14
Declare i2c_algorithm structures as const as they are only stored in the algo field of an i2c_adapter structure. This field is of type const, so i2c_algorithm structures having this property can be made const too. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> for Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-08i2c: allow specify device properties in i2c_board_infoDmitry Torokhov1-1/+15
With many drivers converting to using generic device properties, it is useful to provide array of device properties when instantiating new i2c client via i2c_board_info and have them automatically added to the device in question. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07i2c: acpi: Initialize info.type from of_compatibleDan O'Donovan1-1/+2
When using devicetree i2c_board_info.type is set to the compatible string with the vendor prefix removed. For I2C devices described via ACPI the i2c_board_info.type string is set to the ACPI device name. When using ACPI and DT ids this string ends up something like "PRP0001:00". If the of_compatible property is present try to use that instead. This makes it easier to instantiate i2c drivers through ACPI with DT ids. Signed-off-by: Dan O'Donovan <dan@emutex.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-28i2c: i2c-cros-ec-tunnel: Reduce logging noiseGuenter Roeck1-4/+4
If an i2c access through i2c-cros-ec-tunnel returns an error, the following log message is seen on the console. cros-ec-i2c-tunnel ff200000.spi:ec@0:i2c-tunnel: Error parsing EC i2c message -121 This can happen a lot if, for example, the i2c-detect command is executed. Since it is perfectly normal for an i2c controller to report an error, drop the message. Also, report -ENXIO instead of -EREMOTEIO if the access error is due to NAK from the device, and return -EIO instead of -EREMOTEIO for other errors, as suggested in Documentation/i2c/fault-codes. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-28i2c: core: helper function to detect slave modeLuis Oliveira1-0/+33
This function has the purpose of mode detection by checking the device nodes for a reg matching with the I2C_OWN_SLAVE_ADDREESS flag. Currently only checks using OF functions (ACPI slave not supported yet). Signed-off-by: Luis Oliveira <lolivei@synopsys.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-26i2c: imx-lpi2c: add VLLS mode supportGao Pan1-0/+20
When system enters VLLS mode, module power is turned off. As a result, all registers are reset to HW default value. After exiting VLLS mode, registers are still in default mode. As a result, the pinctrl settings are incorrect, which will affect the module function. The patch recovers the pinctrl setting when exit VLLS mode. Signed-off-by: Gao Pan <pandy.gao@nxp.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> [wsa: added missing include] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-25i2c: omap: constify dev_pm_ops structuresBhumika Goyal1-1/+1
Declare dev_pm_ops structures as const as they are only stored in the pm field of a device_driver structure. This field is of type const, so dev_pm_ops structures having similar properties can be declared const too. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-25i2c: mv64xxx: add suspend/resume supportGrzegorz Jaszczyk1-0/+21
This commit implements suspend/resume support in the mv64xxx I2C controller driver. There is no need to implement a ->suspend() hook, as calling mv64xxx_i2c_hw_init() at ->resume() time is enough. Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Lior Amsalem <alior@marvell.com> Tested-by: Lior Amsalem <alior@marvell.com> [Thomas: switch to dev_pm_ops, fix build warning when !PM.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-25i2c: stm32f4: add driverM'boumba Cedric Madianga3-0/+908
This patch adds support for the STM32F4 I2C controller. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-25i2c: i2c-cadence: Initialize configuration before probing devicesMike Looijmans1-4/+4
The cadence I2C driver calls cdns_i2c_writereg(..) to setup a workaround in the controller, but did so after calling i2c_add_adapter() which starts probing devices on the bus. Change the order so that the configuration is completely finished before using the adapter. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-12i2c: piix4: Avoid race conditions with IMCRicardo Ribalda1-0/+22
On AMD's SB800 and upwards, the SMBus is shared with the Integrated Micro Controller (IMC). The platform provides a hardware semaphore to avoid race conditions among them. (Check page 288 of the SB800-Series Southbridges Register Reference Guide http://support.amd.com/TechDocs/45482.pdf) Without this patch, many access to the SMBus end with an invalid transaction or even with the bus stalled. Reported-by: Alexandre Desnoyers <alex@qtec.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>: Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-12i2c: fix spelling mistake: "insufficent" -> "insufficient"Colin Ian King1-1/+1
Trivial fix to spelling mistake in WARN message, insufficient has an insufficient number of i's in the spelling. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-12i2c: print correct device invalid addressJohn Garry1-1/+1
In of_i2c_register_device(), when the check for device address validity fails we print the info.addr, which has not been assigned properly. Fix this by printing the actual invalid address. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Fixes: b4e2f6ac1281 ("i2c: apply DT flags when probing") Cc: stable@kernel.org
2017-01-12i2c: do not enable fall back to Host Notify by defaultDmitry Torokhov1-9/+8
Falling back unconditionally to HostNotify as primary client's interrupt breaks some drivers which alter their functionality depending on whether interrupt is present or not, so let's introduce a board flag telling I2C core explicitly if we want wired interrupt or HostNotify-based one: I2C_CLIENT_HOST_NOTIFY. For DT-based systems we introduce "host-notify" property that we convert to I2C_CLIENT_HOST_NOTIFY board flag. Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-12i2c: fix kernel memory disclosure in dev interfaceVlad Tsyrklevich1-1/+1
i2c_smbus_xfer() does not always fill an entire block, allowing kernel stack memory disclosure through the temp variable. Clear it before it's read to. Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds1-1/+1
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-18i2c: mux: mlxcpld: fix i2c mux selection cachingPeter Rosin1-11/+13
smbus functions return -ve on error, 0 on success. However, __i2c_transfer() have a different return signature - -ve on error, or number of buffers transferred (which may be zero or greater). The upshot of this is that the sense of the test is reversed when using the mux on a bus supporting the master_xfer method: we cache the value and never retry if we fail to transfer any buffers, but if we succeed, we clear the cached value. Fix this by making mlxcpld_mux_reg_write() return a -ve error code for all failure cases, just as was done in commit 7f638c1cb0a1 ("i2c: mux: pca954x: fix i2c mux selection caching"). This also aligns the implementations of these two muxes in this area. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-17i2c: designware: fix wrong Tx/Rx FIFO for ACPITin Huynh1-7/+24
ACPI always sets Tx/Rx FIFO to 32. This configuration will cause problem if the IP core supports a FIFO size of less than 32. The driver should read the FIFO size from the IP and select the smaller one of the two. Signed-off-by: Tin Huynh <tnhuynh@apm.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-17i2c: xgene: Fix missing code of DTB supportTin Huynh1-0/+1
In DTB case, i2c-core doesn't create slave device which is installed on i2c-xgene bus because of missing code in this driver. This patch fixes this issue. Signed-off-by: Tin Huynh <tnhuynh@apm.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-17i2c: mux: pca954x: fix i2c mux selection cachingRussell King1-1/+4
smbus functions return -ve on error, 0 on success. However, __i2c_transfer() have a different return signature - -ve on error, or number of buffers transferred (which may be zero or greater.) The upshot of this is that the sense of the test is reversed when using the mux on a bus supporting the master_xfer method: we cache the value and never retry if we fail to transfer any buffers, but if we succeed, we clear the cached value. Fix this by making pca954x_reg_write() return a negative error code for all failure cases. Fixes: 463e8f845cbf ("i2c: mux: pca954x: retry updating the mux selection on failure") Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-17i2c: octeon: thunderx: Limit register access retriesJan Glauber2-6/+19
Do not infinitely retry register readq and writeq operations in order to not lock up the CPU in case the TWSI gets stuck. Return -EIO in case of a failed data read. For all other cases just return so subsequent operations will fail and trigger the recovery. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-15Merge tag 'trace-v4.10' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "This release has a few updates: - STM can hook into the function tracer - Function filtering now supports more advance glob matching - Ftrace selftests updates and added tests - Softirq tag in traces now show only softirqs - ARM nop added to non traced locations at compile time - New trace_marker_raw file that allows for binary input - Optimizations to the ring buffer - Removal of kmap in trace_marker - Wakeup and irqsoff tracers now adhere to the set_graph_notrace file - Other various fixes and clean ups" * tag 'trace-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (42 commits) selftests: ftrace: Shift down default message verbosity kprobes/trace: Fix kprobe selftest for newer gcc tracing/kprobes: Add a helper method to return number of probe hits tracing/rb: Init the CPU mask on allocation tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results tracing/fgraph: Have wakeup and irqsoff tracers ignore graph functions too fgraph: Handle a case where a tracer ignores set_graph_notrace tracing: Replace kmap with copy_from_user() in trace_marker writing ftrace/x86_32: Set ftrace_stub to weak to prevent gcc from using short jumps to it tracing: Allow benchmark to be enabled at early_initcall() tracing: Have system enable return error if one of the events fail tracing: Do not start benchmark on boot up tracing: Have the reg function allow to fail ring-buffer: Force rb_end_commit() and rb_set_commit_to_write() inline ring-buffer: Froce rb_update_write_stamp() to be inlined ring-buffer: Force inline of hotpath helper functions tracing: Make __buffer_unlock_commit() always_inline tracing: Make tracepoint_printk a static_key ring-buffer: Always inline rb_event_data() ring-buffer: Make rb_reserve_next_event() always inlined ...
2016-12-15Merge branch 'i2c/for-4.10' of ↵Linus Torvalds31-379/+2066
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - the first series of making i2c_device_id optional instead of mandatory (in favor of alternatives like of_device_id). This involves adding a new probe callback (probe_new) which removes some peculiarities I2C had for a long time now. The new probe is matching the other subsystems now and the old one will be removed once all users are converted. It is expected to take a while but there is ongoing interest in that. - SMBus Host Notify introduced 4.9 got refactored. They are now using interrupts instead of the alert callback which solves multiple issues. - new drivers for iMX LowPower I2C, Mellanox CPLD and its I2C mux - significant refactoring for bcm2835 driver - the usual set of driver updates and improvements * 'i2c/for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (46 commits) i2c: fsl-lpi2c: read lpi2c fifo size in probe() i2c: octeon: thunderx: Remove double-check after interrupt i2c: octeon: thunderx: TWSI software reset in recovery i2c: cadence: Allow Cadence I2C to be selected for Cadence Xtensa CPUs i2c: sh_mobile: Add per-Generation fallback bindings i2c: rcar: Add per-Generation fallback bindings i2c: imx-lpi2c: add low power i2c bus driver dt-bindings: i2c: imx-lpi2c: add devicetree bindings i2c: designware-pcidrv: Add 10bit address feature to medfield/merrifield i2c: pxa: Add support for the I2C units found in Armada 3700 i2c: pxa: Add definition of fast and high speed modes via the regs layout dt-bindings: i2c: pxa: Update the documentation for the Armada 3700 i2c: qup: support SMBus block read i2c: qup: add ACPI support i2c: designware: Consolidate default functionality bits i2c: i2c-mux-gpio: update mux with gpiod_set_array_value_cansleep i2c: mux: pca954x: Add ACPI support for pca954x i2c: use an IRQ to report Host Notify events, not alert i2c: i801: remove SMBNTFDDAT reads as they always seem to return 0 i2c: i801: use the BIT() macro for FEATURES_* also ...
2016-12-11i2c: fsl-lpi2c: read lpi2c fifo size in probe()Gao Pan1-9/+15
The lpi2c fifo size is a read only parameter resides Parameter Register. It's better to read lpi2c tx/rx fifo size in probe() other than just define a macro for it. Signed-off-by: Gao Pan <pandy.gao@nxp.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11i2c: octeon: thunderx: Remove double-check after interruptJan Glauber1-41/+2
Commit 1bb1ff3e7c74 ("i2c: octeon: Improve performance if interrupt is early") added a double-check around the wait_event_timeout() condition. The performance problem that this commit tried to work-around could not be reproduced. It also makes the wait condition more complicated then it should be. Therefore remove the double-check. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11i2c: octeon: thunderx: TWSI software reset in recoveryJan Glauber1-0/+3
I've seen i2c recovery reporting long loops of: [ 1035.887818] i2c i2c-4: SCL is stuck low, exit recovery [ 1037.999748] i2c i2c-4: SCL is stuck low, exit recovery [ 1040.111694] i2c i2c-4: SCL is stuck low, exit recovery ... Add a TWSI software reset which clears the status and STA,STP,IFLG in SW_TWSI_EOP_TWSI_CTL. With this the recovery works fine and above message is not seen. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11i2c: cadence: Allow Cadence I2C to be selected for Cadence Xtensa CPUsJan Kotas1-1/+1
This patch allows Cadence I2C controller to be selected in systems using Cadence Xtensa processors. Signed-off-by: Jan Kotas <jank@cadence.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11i2c: sh_mobile: Add per-Generation fallback bindingsSimon Horman1-1/+3
Add per-Generation fallback bindings for R-Car SoCs. This is in keeping with the compatibility string scheme is being adopted for drivers for Renesas SoCs. Also, improve readability by listing the rmobile fallback compatibility string after the more-specific compatibility strings they provide a fallback for. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>