summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2016-03-01i2c: brcmstb: allocate correct amount of memory for regmapWolfram Sang1-2/+1
We want the size of the struct, not of a pointer to it. To be future proof, just dereference the pointer to get the desired type. Fixes: dd1aa2524bc5 ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver") Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2016-02-18i2c: i801: Adding Intel Lewisburg support for iTCOAlexandra Yates1-0/+2
Starting from Intel Sunrisepoint (Skylake PCH) the iTCO watchdog resources have been moved to reside under the i801 SMBus host controller whereas previously they were under the LPC device. This patch adds Intel lewisburg SMBus support for iTCO device. It allows to load watchdog dynamically when the hardware is present. Fixes: cdc5a3110e7c ("i2c: i801: add Intel Lewisburg device IDs") Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2016-02-12i2c: uniphier: fix typos in error messagesMasahiro Yamada2-2/+2
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-02-12i2c: omap: Fix PM regression with deferred probe for pm_runtime_reinitTony Lindgren1-1/+3
Commit 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe error and driver unbind") introduced pm_runtime_reinit() that is used to reinitialize PM runtime after -EPROBE_DEFER. This allows shutting down the device after a failed probe. However, for drivers using pm_runtime_use_autosuspend() this can cause a state where suspend callback is never called after -EPROBE_DEFER. On the following device driver probe, hardware state is different from the PM runtime state causing omap_device to produce the following error: omap_device_enable() called from invalid state 1 And with omap_device and omap hardware being picky for PM, this will block any deeper idle states in hardware. The solution is to fix the drivers to follow the PM runtime documentation: 1. For sections of code that needs the device disabled, use pm_runtime_put_sync_suspend() if pm_runtime_set_autosuspend() has been set. 2. For driver exit code, use pm_runtime_dont_use_autosuspend() before pm_runtime_put_sync() if pm_runtime_use_autosuspend() has been set. Fixes: 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe error and driver unbind") Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-29i2c: piix4: don't regress on bus namesJean Delvare1-5/+8
The I2C bus names are supposed to be stable as they can be used by userspace to uniquely identify a specific I2C bus. So restore the original names for all legacy (pre-SB800) devices. For SB800 devices and later, improve the names. "SDA" refers to the serial data pin of each SMBus port, it's an implementation detail the user doesn't need to know. Use "port" instead, which is easier to understand. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Christian Fetzer <fetzer.ch@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-26i2c: designware-pci: use IRQF_COND_SUSPEND flagAndy Shevchenko1-1/+2
This is effectively reapplies the commit b0898fdaffb2 ("i2c: designware-pci: use IRQF_COND_SUSPEND flag") after the commit d80d134182ba ("i2c: designware: Move common probe code into i2c_dw_probe()"). Original message as follows. The mentioned flag fixes a warning on Intel Edison board since one of the I2C controller shares IRQ line with watchdog timer. Fixes: d80d134182ba (i2c: designware: Move common probe code into i2c_dw_probe()) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-26i2c: piix4: Fully initialize SB800 before it is registeredJean Delvare1-10/+9
This closes a race window where I2C device drivers attempt to access I2C buses which aren't fully initialized yet. Signed-off-by: Jean Delvare <jdelvare@suse.de> Tested-by: Christian Fetzer <fetzer.ch@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-26i2c: piix4: Fix SB800 lockingJean Delvare1-16/+6
We need a single mutex for all 4 shared SMBus ports on the SB800. A per-port mutex doesn't protect us from concurrent access. In theory the mutex should be per PCI device, however in practice we know that there's only ever a single instance of the device in a given system so we can use a global. Also take the mutex during initialization, as first port may be already in use when second port is initialized. Signed-off-by: Jean Delvare <jdelvare@suse.de> Tested-by: Christian Fetzer <fetzer.ch@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> [wsa: made mutex static] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-14Merge branch 'i2c/for-4.5' of ↵Linus Torvalds25-392/+1148
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Quite some driver updates: - piix4 can now handle multiplexed adapters - brcmstb, xlr, eg20t, designware drivers support more SoCs - emev2 gained i2c slave support - img-scb and rcar got bigger refactoring to remove issues - lots of common driver updates i2c core changes: - new quirk flag when an adapter does not support clock stretching, so clients can be configured to avoid that if possible - added a helper function to retrieve timing parameters from firmware (with rcar being the first user) - "multi-master" DT binding added so drivers can adapt to this setting (like disabling PM to keep arbitration working) - RuntimePM for the logical adapter device is now always enabled by the core to ensure propagation from childs to the parent (the HW device) - new macro builtin_i2c_driver to reduce boilerplate" * 'i2c/for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (70 commits) i2c: create builtin_i2c_driver to avoid registration boilerplate i2c: imx: fix i2c resource leak with dma transfer dt-bindings: i2c: eeprom: add another EEPROM device dt-bindings: move I2C eeprom descriptions to the proper file i2c: designware: Do not require clock when SSCN and FFCN are provided DT: i2c: trivial-devices: Add Epson RX8010 and MPL3115 i2c: s3c2410: remove superfluous runtime PM calls i2c: always enable RuntimePM for the adapter device i2c: designware: retry transfer on transient failure i2c: ibm_iic: rename i2c_timings struct due to clash with generic version i2c: designware: Add support for AMD Seattle I2C i2c: imx: Remove unneeded comments i2c: st: use to_platform_device() i2c: designware: use to_pci_dev() i2c: brcmstb: Adding support for CM and DSL SoCs i2c: mediatek: fix i2c multi transfer issue in high speed mode i2c: imx: improve code readability i2c: imx: Improve message log when DMA is not used i2c: imx: add runtime pm support to improve the performance i2c: imx: init bus recovery info before adding i2c adapter ...
2016-01-12Merge branch 'acpi-soc'Rafael J. Wysocki2-11/+7
* acpi-soc: PM / clk: don't leave clocks enabled when driver not bound i2c: dw: Add APM X-Gene ACPI I2C device support ACPI / APD: Add APM X-Gene ACPI I2C device support ACPI / LPSS: change 'does not have' to 'has' in comment Revert "dmaengine: dw: platform: provide platform data for Intel" dmaengine: dw: return immediately from IRQ when DMA isn't in use dmaengine: dw: platform: power on device on shutdown ACPI / LPSS: override power state for LPSS DMA device ACPI / LPSS: power on when probe() and otherwise when remove() ACPI / LPSS: do delay for all LPSS devices when D3->D0 ACPI / LPSS: allow to use specific PM domain during ->probe() Revert "ACPI / LPSS: allow to use specific PM domain during ->probe()" device core: add BUS_NOTIFY_DRIVER_NOT_BOUND notification x86/platform/iosf_mbi: Remove duplicate definitions Conflicts: drivers/i2c/busses/i2c-designware-platdrv.c
2016-01-12Merge branch 'device-properties'Rafael J. Wysocki1-27/+23
* device-properties: device property: avoid allocations of 0 length device property: the secondary fwnode needs to depend on the primary device property: add spaces to PROPERTY_ENTRY_STRING macro include/linux/property.h: fix build issues with gcc-4.4.4 i2c: designware: Convert to use unified device property API mfd: intel-lpss: Pass HSUART configuration via properties mfd: intel-lpss: Pass SDA hold time to I2C host controller driver mfd: intel-lpss: Add support for passing device properties mfd: core: propagate device properties to sub devices drivers driver core: Do not overwrite secondary fwnode with NULL if it is set driver core: platform: Add support for built-in device properties device property: Take a copy of the property set device property: Fallback to secondary fwnode if primary misses the property device property: return -EINVAL when property isn't found in ACPI device property: improve readability of macros device property: helper macros for property entry creation device property: keep single value inplace device property: refactor built-in properties support device property: rename helper functions device property: always check for fwnode type
2016-01-10i2c: imx: fix i2c resource leak with dma transferGao Pan1-0/+1
In i2c_imx_dma_xfer(), when dmaengine_submit() returns error, the context goto label err_submit and then return. However, the memory allocated for txdesc has not been freed yet, which leads to resource leak. Signed-off-by: Gao Pan <b54642@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-10i2c: designware: Do not require clock when SSCN and FFCN are providedSuravee Suthikulpanit2-18/+35
The current driver uses input clock source frequency to calculate values for [SS|FS]_[HC|LC] registers. However, when booting ACPI, we do not currently have a good way to provide the frequency information. Instead, we can leverage the SSCN and FFCN ACPI methods, which can be used to directly provide these values. So, the clock information should no longer be required during probing. However, since clk can be invalid, additional checks must be done where we are making use of it. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Tested-by: Loc Ho <lho@apm.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-10i2c: s3c2410: remove superfluous runtime PM callsWolfram Sang1-6/+0
RuntimePM of the adapter device is now taken care of by the core. So, we can remove these calls. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-10i2c: always enable RuntimePM for the adapter deviceWolfram Sang1-0/+3
The adapter device is a logical device. Because of that, it already uses pm_runtime_no_callbacks() in the core. To ensure proper propagation from the children (i2c devices) to the parent of the adapter (the HW device), make sure RuntimePM is enabled in any case. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-10i2c: designware: retry transfer on transient failureBaruch Siach1-0/+1
Set the i2c_adapter retries field to a sensible value. This allows the i2c core to retry master_xfer() when it returns -EAGAIN. Currently the i2c-designware driver returns -EAGAIN only on Tx arbitration failure (DW_IC_TX_ARB_LOST). Reported-by: Rolland Chau <zourongrong@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-07i2c: dw: Add APM X-Gene ACPI I2C device supportLoc Ho1-0/+1
Enable APM X-Gene ACPI I2C device support by adding the corresponding ACPI ID. The platform ACPI APD corresponding change is required to provide the proper clock frequency input. Signed-off-by: Loc Ho <lho@apm.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-05i2c: ibm_iic: rename i2c_timings struct due to clash with generic versionStephen Rothwell1-2/+2
Fixes: e1dba01ca620 ("i2c: add generic routine to parse DT for timing information") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-04i2c: designware: Add support for AMD Seattle I2CSuravee Suthikulpanit1-0/+1
Add device HID AMDI0510 to match the I2C controlers on AMD Seattle platform Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-04i2c: imx: Remove unneeded commentsFabio Estevam1-12/+0
These multi-lines comments do not follow the standard kernel coding style. In fact, they are not useful comments, so get rid of them. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-03i2c: st: use to_platform_device()Geliang Tang1-2/+1
Use to_platform_device() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-03i2c: designware: use to_pci_dev()Geliang Tang1-2/+2
Use to_pci_dev() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-03i2c: brcmstb: Adding support for CM and DSL SoCsKamal Dasu1-24/+56
Broadcoms DSL, CM (cable modem)and STB I2C core implementation have 8 data in/out registers that can transfer 8 bytes or 32 bytes max. Cable and DSL "Peripheral" i2c cores use single byte per data register and the STB can use 4 byte per data register transfer. Adding support to take care of this difference. Accordingly added the compatible string for SoCs using the "Peripheral" I2C block. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-03i2c: mediatek: fix i2c multi transfer issue in high speed modeLiguo Zhang1-2/+19
For mt8173 platform with auto restart support, when doing i2c multi transfer in high speed, we should ignore the first restart irq after the master code, otherwise the first transfer will be discarded. Signed-off-by: Liguo Zhang <liguo.zhang@mediatek.com> Reviewed-by: Eddie Huang <eddie.huang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-03i2c: imx: improve code readabilityGao Pan1-4/+2
Replace of_get_named_gpio_flags with of_get_named_gpio because the latter has less parameters, which improves code readability. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Gao Pan <b54642@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-03i2c: imx: Improve message log when DMA is not usedFabio Estevam1-1/+1
When DMA cannot be used, it is better to state that the I2C controller will operate in PIO mode. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-03i2c: imx: add runtime pm support to improve the performanceGao Pan1-12/+78
In our former i2c driver, i2c clk is enabled and disabled in xfer function, which contributes to power saving. However, the clk enable process brings a busy wait delay until the core is stable. As a result, the performance is sacrificed. To weigh the power consumption and i2c bus performance, runtime pm is the good solution for it. The clk is enabled when a i2c transfer starts, and disabled after a specifically defined delay. If CONFIG_PM is disabled the net result of this patch is that the clock is never disabled. Without the patch the test case (many eeprom reads) executes with approx: real 1m7.735s user 0m0.488s sys 0m20.040s With the patch the same test case (many eeprom reads) executes with approx: real 0m54.241s user 0m0.440s sys 0m5.920s Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Gao Pan <b54642@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [wsa: sorted includes] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-03i2c: imx: init bus recovery info before adding i2c adapterGao Pan1-2/+2
During driver probe, i2c_imx_init_recovery_info() must come before i2c_add_numbered_adapter(), because the get/set_scl() functions are assigned in i2c_register_adapter() under the conditon that bus recover_info are initialized. Otherwise, get/set_scl() function pointers never get assigned. In such case, when i2c_generic_gpio_recovery() is used for bus recovery, there will be kernel crash because bri->set_scl is NULL. The solution to this bug is moving i2c_imx_init_recovery_info() before i2c_register_adapter(). Signed-off-by: Gao Pan <b54642@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2016-01-02i2c: rcar: disable PM in multi-master modeWolfram Sang1-3/+14
In multi master mode, the IP core needs to be always active for arbitration reasons. Get the config from DT and set up PM depending on the config. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-02i2c: rcar: remove macros dealing with flagsWolfram Sang1-13/+9
These macros don't really hide complexity, but C idioms. Removing them makes the code easier to read IMO and make a planned extension easier. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-02i2c: img-scb: support repeated starts on IP v3.3Sifan Naeem1-9/+36
In version 3.3 of the IP when transaction halt is set, an interrupt will be generated after each byte of a transfer instead of after every transfer but before the stop bit. Due to this behaviour we have to be careful that every time we release the transaction halt we have to re-enable it straight away so that we only process a single byte, not doing so will result in all remaining bytes been processed and a stop bit being issued, which will prevent us having a repeated start. This change will have no effect on earlier versions of the IP. Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com> Acked-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: James Hartley <james.hartley@imgtec.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-02i2c: img-scb: add handle for Master halt interruptSifan Naeem1-3/+14
Master halt is issued after each byte of a transaction is processed in IP version 3.3. Master halt will stall the bus by holding the SCK line low until the halt bit in the scb_general_control is cleared. After the last byte of a transfer is processed we can use the Master Halt interrupt to facilitate a repeated start transfer without issuing a stop bit. Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com> Reviewed-by: James Hartley <james.hartley@imgtec.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-02i2c: img-scb: add handle for stop detected interruptSifan Naeem1-1/+10
Stop Detected interrupt is triggered when a Stop bit is detected on the bus, which indicates the end of the current transfer. When the end of a transfer is indicated by the Stop Detected interrupt, drain the FIFO and signal completion for the transaction. Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-02i2c: img-scb: remove fifo EMPTYING interrupts handleSifan Naeem1-13/+3
Now that we are using the transaction halt interrupt to safely control repeated start transfers, we no longer need to handle the fifo emptying interrupts. Handling this interrupt along with Transaction Halt interrupt can cause erratic behaviour. Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-01-02i2c: img-scb: support I2C_M_IGNORE_NAKSifan Naeem1-5/+10
This commit adds support for the I2C_M_IGNORE_NAK protocol modification. Such behaviour can only be implemented in atomic mode. So, if a transaction contains a message with such flag the drivers switches to atomic mode. The implementation consists simply in treating NAKs as ACKs. Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com> Acked-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: James Hartley <james.hartley@imgtec.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-19i2c: rcar: disable runtime PM correctly in slave modeWolfram Sang1-2/+2
When we also are I2C slave, we need to disable runtime PM because the address detection mechanism needs to be active all the time. However, we can reenable runtime PM once the slave instance was unregistered. So, use pm_runtime_get_sync/put to achieve this, since it has proper refcounting. pm_runtime_allow/forbid is like a global knob controllable from userspace which is unsuitable here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2015-12-17i2c: make i2c_parse_fw_timings() always visibleWolfram Sang1-52/+52
This function used to be DT only, so it lived inside a CONFIG_OF block. Now it uses device attributes and must be moved outside of it. No further code changes, only one whitespace improvement. Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-17i2c: emev: select I2C slave supportWolfram Sang1-0/+1
Until we have proper support to make I2C slave support fully optional, select it to prevent build errors on randconfigs. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-16i2c: xlr: add interrupt support for Sigma Designs chipsMåns Rullgård1-0/+119
The Sigma Designs variant of this controller has the ability to generate interrupts. This is controlled using two additional registers, oddly enough overlapping with the defined but unused HDSTATIM. This patch adds support for using this feature instead of busy-looping if an IRQ is specified. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-16i2c: xlr: fix extra read/write at end of rx transferMåns Rullgård1-23/+27
The BYTECNT register holds the transfer size minus one. Setting it to the correct value removes the need for a dummy read/write at the end of each transfer. As zero-length transfers are not supported, do not advertise I2C_FUNC_SMBUS_QUICK. In other words, this patch makes the driver transfer the number of bytes requested unless this is zero, which is not supported by the hardware and is thus refused. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-15i2c: xlr: add support for Sigma Designs controller variantMåns Rullgård2-7/+80
Sigma Designs chips use a variant of this controller with the following differences: - The BUSY bit in the STATUS register is inverted - Bit 8 of the CONFIG register must be set - The controller can generate interrupts This patch adds support for the first two of these. It also calculates and sets the correct clock divisor if a clk is provided. The bus frequency is optionally speficied in the device tree node. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-14i2c: uniphier_f: error out if bus speed is zeroMasahiro Yamada1-0/+5
There is code to divide by "bus_speed" some lines below. To eliminate the possibility of division by zero, bail out if "clock-frequency" is specified as zero. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-14i2c: uniphier_f: error out if clock rate is zeroMasahiro Yamada1-1/+5
This input clock is used to generate the sampling clock for I2C bus. If the clock rate is zero, there is something wrong with the clock driver. Bail out with the appropriate error message in such a case. It would make it easier to find the root cause of failure. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-14i2c: uniphier: error out if bus speed is zeroMasahiro Yamada1-0/+5
There is code to divide by "bus_speed" some lines below. To eliminate the possibility of division by zero, bail out if "clock-frequency" is specified as zero. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-14i2c: uniphier: error out if clock rate is zeroMasahiro Yamada1-1/+5
This input clock is used to generate the sampling clock for I2C bus. If the clock rate is zero, there is something wrong with the clock driver. Bail out with the appropriate error message in such a case. It would make it easier to find the root cause of failure. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-14i2c: rcar: honor additional i2c timings from DTWolfram Sang1-9/+12
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-14i2c: rcar: switch to i2c generic dt parsingWolfram Sang1-7/+9
Switch to the new generic functions. Plain convert, no functionality added yet. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-14i2c: rcar: refactor probe function a littleWolfram Sang1-23/+17
The probe function is a little bit messy, something here, something there. Rework it so that there is some order: first init the private structure, then the adapter, then do HW init. This also allows us to remove the device argument of the clock calculation function, because it now can be deduced from the private structure. Also, shorten some lines where possible. This is a preparation for further refactoring. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-14i2c: add generic routine to parse DT for timing informationWolfram Sang1-0/+53
Inspired from the i2c-rk3x driver (thanks guys!) but refactored and extended. See built-in docs for further information. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-12i2c: designware: Keep pm_runtime_enable/_disable calls in syncJarkko Nikula1-5/+4
On an hardware shared I2C bus (certain Intel Baytrail SoC platforms) the runtime PM disable depth keeps increasing over repeated modprobe/rmmod cycle because pm_runtime_disable() is called without checking should it be disabled already because of bus sharing. This hasn't made any other harm than dev->power.disable_depth keeps increasing but keep it sync by calling pm_runtime_disable() only when runtime PM is not disabled. Reported-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>