summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2020-06-01Merge branches 'pm-core' and 'pm-sleep'Rafael J. Wysocki1-2/+2
* pm-core: PM: runtime: Replace pm_runtime_callbacks_present() PM: runtime: clk: Fix clk_pm_runtime_get() error path PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend() * pm-sleep: PM: hibernate: Restrict writes to the resume device PM: hibernate: Split off snapshot dev option PM: hibernate: Incorporate concurrency handling PM: sleep: Helpful edits for devices.rst documentation Documentation: PM: sleep: Update driver flags documentation PM: sleep: core: Rename DPM_FLAG_LEAVE_SUSPENDED PM: sleep: core: Rename DPM_FLAG_NEVER_SKIP PM: sleep: core: Rename dev_pm_smart_suspend_and_suspended() PM: sleep: core: Rename dev_pm_may_skip_resume() PM: sleep: core: Rework the power.may_skip_resume handling PM: sleep: core: Do not skip callbacks in the resume phase PM: sleep: core: Fold functions into their callers PM: sleep: core: Simplify the SMART_SUSPEND flag handling
2020-05-15i2c: mux: demux-pinctrl: Fix an error handling path in ↵Christophe JAILLET1-0/+1
'i2c_demux_pinctrl_probe()' A call to 'i2c_demux_deactivate_master()' is missing in the error handling path, as already done in the remove function. Fixes: 50a5ba876908 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-15i2c: altera: Fix race between xfer_msg and isr threadAtsushi Nemoto1-1/+9
Use a mutex to protect access to idev->msg_len, idev->buf, etc. which are modified by both altr_i2c_xfer_msg() and altr_i2c_isr(). This is the minimal fix for easy backporting. A cleanup to remove the spinlock will be added later. Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> [wsa: updated commit message] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-15i2c: algo-pca: update contact emailWolfram Sang1-1/+1
The 'pengutronix' address is defunct for years. Use the proper contact address. Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-15i2c: at91: Fix pinmux after devm_gpiod_get() for bus recoveryCodrin Ciubotariu1-3/+17
devm_gpiod_get() usually calls gpio_request_enable() for non-strict pinmux drivers. These puts the pins in GPIO mode, whithout notifying the pinctrl driver. At this point, the I2C bus no longer owns the pins. To mux the pins back to the I2C bus, we use the pinctrl driver to change the state of the pins to GPIO, before using devm_gpiod_get(). After the pins are received as GPIOs, we switch theer pinctrl state back to the default one, Fixes: d3d3fdcc4c90 ("i2c: at91: implement i2c bus recovery") Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05i2c: use my kernel.org address from now onWolfram Sang2-2/+2
The old email is still active, but for easier handling, I am going to use my kernel.org address from now on. Also, add a mailmap for the now defunct Pengutronix address. Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-05-05i2c: fix missing pm_runtime_put_sync in i2c_device_probeAlain Volmat1-6/+16
In case of the I2C client exposes the flag I2C_CLIENT_HOST_NOTIFY, pm_runtime_get_sync is called in order to always keep active the adapter. However later on, pm_runtime_put_sync is never called within the function in case of an error. This commit add this error handling. Fixes: 72bfcee11cf8 ("i2c: Prevent runtime suspend of adapter when Host Notify is required") Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-04-30i2c: aspeed: Avoid i2c interrupt status clear race condition.ryan_chen1-1/+4
In AST2600 there have a slow peripheral bus between CPU and i2c controller. Therefore GIC i2c interrupt status clear have delay timing, when CPU issue write clear i2c controller interrupt status. To avoid this issue, the driver need have read after write clear at i2c ISR. Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C") Signed-off-by: ryan_chen <ryan_chen@aspeedtech.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [wsa: added Fixes tag] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-30i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handlingDan Carpenter1-1/+1
The problem is that we dereference "privdata->pci_dev" when we print the error messages in amd_mp2_pci_init(): dev_err(ndev_dev(privdata), "Failed to enable MP2 PCI device\n"); ^^^^^^^^^^^^^^^^^ Fixes: 529766e0a011 ("i2c: Add drivers for the AMD PCIe MP2 I2C controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2020-04-28Revert "i2c: tegra: Better handle case where CPU0 is busy for a long time"Wolfram Sang1-15/+12
This reverts commit a900aeac253729411cf33c6cb598c152e9e4137f because regressions were showing up. Suggested-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/dmaengine/20200319201140.17451-1-digetx@gmail.com/ Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-28Revert "i2c: tegra: Synchronize DMA before termination"Wolfram Sang1-9/+0
This reverts commit 8814044fe0fa182abc9ff818d3da562de98bc9a7 because regressions were showing up. Suggested-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/dmaengine/20200319201140.17451-1-digetx@gmail.com/ Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-28i2c: iproc: generate stop event for slave writesRayagonda Kokatanur1-0/+3
When slave status is I2C_SLAVE_RX_END, generate I2C_SLAVE_STOP event to i2c_client. Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-24PM: sleep: core: Rename DPM_FLAG_LEAVE_SUSPENDEDRafael J. Wysocki1-2/+2
Rename DPM_FLAG_LEAVE_SUSPENDED to DPM_FLAG_MAY_SKIP_RESUME which matches its purpose more closely. No functional impact. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2020-04-15i2c: tegra: Synchronize DMA before terminationDmitry Osipenko1-0/+9
DMA transfer could be completed, but CPU (which handles DMA interrupt) may get too busy and can't handle the interrupt in a timely manner, despite of DMA IRQ being raised. In this case the DMA state needs to synchronized before terminating DMA transfer in order not to miss the DMA transfer completion. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: tegra: Better handle case where CPU0 is busy for a long timeDmitry Osipenko1-12/+15
Boot CPU0 always handle I2C interrupt and under some rare circumstances (like running KASAN + NFS root) it may stuck in uninterruptible state for a significant time. In this case we will get timeout if I2C transfer is running on a sibling CPU, despite of IRQ being raised. In order to handle this rare condition, the IRQ status needs to be checked after completion timeout. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: remove i2c_new_probed_device APIWolfram Sang1-13/+0
All in-tree users have been converted to the new i2c_new_scanned_device function, so remove this deprecated one. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: altera: use proper variable to hold errnoWolfram Sang1-5/+4
device_property_read_u32() returns errno or 0, so we should use the integer variable 'ret' and not the u32 'val' to hold the retval. Fixes: 0560ad576268 ("i2c: altera: Add Altera I2C Controller driver") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: designware: platdrv: Remove DPM_FLAG_SMART_SUSPEND flag on BYT and CHTHans de Goede1-4/+10
We already set DPM_FLAG_SMART_PREPARE, so we completely skip all callbacks (other then prepare) where possible, quoting from dw_i2c_plat_prepare(): /* * If the ACPI companion device object is present for this device, it * may be accessed during suspend and resume of other devices via I2C * operation regions, so tell the PM core and middle layers to avoid * skipping system suspend/resume callbacks for it in that case. */ return !has_acpi_companion(dev); Also setting the DPM_FLAG_SMART_SUSPEND will cause acpi_subsys_suspend() to leave the controller runtime-suspended even if dw_i2c_plat_prepare() returned 0. Leaving the controller runtime-suspended normally, when the I2C controller is suspended during the suspend_late phase, is not an issue because the pm_runtime_get_sync() done by i2c_dw_xfer() will (runtime-)resume it. But for dw I2C controllers on Bay- and Cherry-Trail devices acpi_lpss.c leaves the controller alive until the suspend_noirq phase, because it may be used by the _PS3 ACPI methods of PCI devices and PCI devices are left powered on until the suspend_noirq phase. Between the suspend_late and resume_early phases runtime-pm is disabled. So for any ACPI I2C OPRegion accesses done after the suspend_late phase, the pm_runtime_get_sync() done by i2c_dw_xfer() is a no-op and the controller is left runtime-suspended. i2c_dw_xfer() has a check to catch this condition (rather then waiting for the I2C transfer to timeout because the controller is suspended). acpi_subsys_suspend() leaving the controller runtime-suspended in combination with an ACPI I2C OPRegion access done after the suspend_late phase triggers this check, leading to the following error being logged on a Bay Trail based Lenovo Thinkpad 8 tablet: [ 93.275882] i2c_designware 80860F41:00: Transfer while suspended [ 93.275993] WARNING: CPU: 0 PID: 412 at drivers/i2c/busses/i2c-designware-master.c:429 i2c_dw_xfer+0x239/0x280 ... [ 93.276252] Workqueue: kacpi_notify acpi_os_execute_deferred [ 93.276267] RIP: 0010:i2c_dw_xfer+0x239/0x280 ... [ 93.276340] Call Trace: [ 93.276366] __i2c_transfer+0x121/0x520 [ 93.276379] i2c_transfer+0x4c/0x100 [ 93.276392] i2c_acpi_space_handler+0x219/0x510 [ 93.276408] ? up+0x40/0x60 [ 93.276419] ? i2c_acpi_notify+0x130/0x130 [ 93.276433] acpi_ev_address_space_dispatch+0x1e1/0x252 ... So since on BYT and CHT platforms we want ACPI I2c OPRegion accesses to work until the suspend_noirq phase, we need the controller to be runtime-resumed during the suspend phase if it is runtime-suspended suspended at that time. This means that we must not set the DPM_FLAG_SMART_SUSPEND on these platforms. On BYT and CHT we already have a special ACCESS_NO_IRQ_SUSPEND flag to make sure the controller stays functional until the suspend_noirq phase. This commit makes the driver not set the DPM_FLAG_SMART_SUSPEND flag when that flag is set. Cc: stable@vger.kernel.org Fixes: b30f2f65568f ("i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-02Merge branch 'i2c/for-5.7' of ↵Linus Torvalds65-483/+733
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has: - using defines for bus speeds to avoid mistakes in hardcoded values; lots of small driver updates because of that. Thanks, Andy! - API change: i2c_setup_smbus_alert() was renamed to i2c_new_smbus_alert_device() and returns ERRPTR now. All in-tree users have been converted - in the core, a rare race condition when deleting the cdev has been fixed. Thanks, Kevin! - lots of driver updates. Thanks, everyone! I also want to mention: The amount of review and testing tags given was quite high this time. Thank you to these people, too. I hope we can keep it like this!" * 'i2c/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits) i2c: rcar: clean up after refactoring i2c_timings macintosh: convert to i2c_new_scanned_device i2c: drivers: Use generic definitions for bus frequencies i2c: algo: Use generic definitions for bus frequencies i2c: stm32f7: switch to I²C generic property parsing i2c: rcar: Consolidate timings calls in rcar_i2c_clock_calculate() i2c: core: Allow override timing properties with 0 i2c: core: Provide generic definitions for bus frequencies i2c: mxs: Use dma_request_chan() instead dma_request_slave_channel() i2c: imx: remove duplicate print after platform_get_irq() i2c: designware: Fix spelling typos in the comments i2c: designware: Discard i2c_dw_read_comp_param() function i2c: designware: Detect the FIFO size in the common code i2c: dev: Fix the race between the release of i2c_dev and cdev i2c: qcom-geni: Drop of_platform.h include i2c: qcom-geni: Grow a dev pointer to simplify code i2c: qcom-geni: Let firmware specify irq trigger flags i2c: stm32f7: do not backup read-only PECR register i2c: smbus: remove outdated references to irq level triggers i2c: convert SMBus alert setup function to return an ERRPTR ...
2020-03-31i2c: rcar: clean up after refactoring i2c_timingsWolfram Sang1-6/+6
The pointer is not really needed anymore since we have the timings struct available in the function itself now. Remove the pointer and access the struct directly. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-28i2c: pca-platform: Use platform_irq_get_optionalChris Packham1-1/+1
The interrupt is not required so use platform_irq_get_optional() to avoid error messages like i2c-pca-platform 22080000.i2c: IRQ index 0 not found Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-28i2c: st: fix missing struct parameter descriptionAlain Volmat1-0/+1
Fix a missing struct parameter description to allow warning free W=1 compilation. Signed-off-by: Alain Volmat <avolmat@me.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-26Merge tag 'v5.6-rc7' into i2c/for-5.7Wolfram Sang6-70/+26
Linux 5.6-rc7
2020-03-24i2c: nvidia-gpu: Handle timeout correctly in gpu_i2c_check_status()Kai-Heng Feng1-12/+8
Nvidia card may come with a "phantom" UCSI device, and its driver gets stuck in probe routine, prevents any system PM operations like suspend. There's an unaccounted case that the target time can equal to jiffies in gpu_i2c_check_status(), let's solve that by using readl_poll_timeout() instead of jiffies comparison functions. Fixes: c71bcdcb42a7 ("i2c: add i2c bus driver for NVIDIA GPU") Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Ajay Gupta <ajayg@nvidia.com> Tested-by: Ajay Gupta <ajayg@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-24i2c: drivers: Use generic definitions for bus frequenciesAndy Shevchenko44-199/+165
Since we have generic definitions for bus frequencies, let's use them. Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Robert Richter <rrichter@marvell.com> Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Elie Morisse <syniurge@gmail.com> Acked-by: Nehal Shah <nehal-bakulchandra.shah@amd.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-24i2c: algo: Use generic definitions for bus frequenciesAndy Shevchenko1-3/+3
Since we have generic definitions for bus frequencies, let's use them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-24i2c: stm32f7: switch to I²C generic property parsingAndy Shevchenko1-31/+26
Switch to the new generic functions: i2c_parse_fw_timings(). While here, replace hard coded values with standard bus frequency definitions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-24i2c: rcar: Consolidate timings calls in rcar_i2c_clock_calculate()Andy Shevchenko1-9/+9
Move i2c_parse_fw_timings() to rcar_i2c_clock_calculate() to consolidate timings calls in one place. While here, replace hard coded values with standard bus frequency definitions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-24i2c: core: Allow override timing properties with 0Andy Shevchenko2-14/+18
Some drivers may allow to override properties with 0 value when defaults are not in use, thus, replace memset() with corresponding per property update. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-24i2c: core: Provide generic definitions for bus frequenciesAndy Shevchenko2-5/+5
There are few maximum bus frequencies being used in the I²C core code. Provide generic definitions for bus frequencies and use them in the core. The drivers may use predefined constants where it is appropriate. Some of them are already using these under slightly different names. We will convert them later to use newly introduced defines. Note, the name of modes are chosen to follow well established naming scheme [1]. These definitions will also help to avoid typos in the numbers that may lead to subtle errors. [1]: https://en.wikipedia.org/wiki/I%C2%B2C#Differences_between_modes Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-22i2c: mxs: Use dma_request_chan() instead dma_request_slave_channel()Peter Ujfalusi1-3/+3
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-22i2c: hix5hd2: add missed clk_disable_unprepare in removeChuhong Yuan1-0/+1
The driver forgets to disable and unprepare clk when remove. Add a call to clk_disable_unprepare to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2020-03-21i2c: imx: remove duplicate print after platform_get_irq()Tang Bin1-3/+1
We don't need dev_err() message because when something goes wrong, platform_get_irq() has print an error message itself, so we should remove duplicate dev_err(). Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-21i2c: designware: Fix spelling typos in the commentsAndy Shevchenko5-8/+8
Fix spelling typos in the comments with help of `codespell`. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-21i2c: designware: Discard i2c_dw_read_comp_param() functionSerge Semin2-7/+0
There is no code left in the kernel which would be using the function. So just remove it. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-21i2c: designware: Detect the FIFO size in the common codeSerge Semin5-24/+27
The problem with detecting the FIFO depth in the platform driver is that in order to implement this we have to access the controller IC_COMP_PARAM_1 register. Currently it's done before the i2c_dw_set_reg_access() method execution, which is errors prone since the method determines the registers endianness and access mode and we can't use dw_readl/dw_writel accessors before this information is retrieved. We also can't move the i2c_dw_set_reg_access() function invocation to after the master/slave probe functions call (when endianness and access mode are determined), since the FIFO depth information is used by them for initializations. So in order to fix the problem we have no choice but to move the FIFO size detection methods to the common code and call it at the probe stage. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-20i2c: dev: Fix the race between the release of i2c_dev and cdevKevin Hao1-22/+26
The struct cdev is embedded in the struct i2c_dev. In the current code, we would free the i2c_dev struct directly in put_i2c_dev(), but the cdev is manged by a kobject, and the release of it is not predictable. So it is very possible that the i2c_dev is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 19 PID: 1 at lib/debugobjects.c:325 debug_print_object+0xb0/0xf0 Modules linked in: CPU: 19 PID: 1 Comm: swapper/0 Tainted: G W 5.2.20-yocto-standard+ #120 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 80c00089 (Nzcv daIf +PAN +UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff00001292f7d0 x29: ffff00001292f7d0 x28: ffff800b82151788 x27: 0000000000000001 x26: ffff800b892c0000 x25: ffff0000124a2558 x24: 0000000000000000 x23: ffff00001107a1d8 x22: ffff0000116b5088 x21: ffff800bdc6afca8 x20: ffff000012471ae8 x19: ffff00001168f2c8 x18: 0000000000000010 x17: 00000000fd6f304b x16: 00000000ee79de43 x15: ffff800bc0e80568 x14: 79616c6564203a74 x13: 6e6968207473696c x12: 5f72656d6974203a x11: ffff0000113f0018 x10: 0000000000000000 x9 : 000000000000001f x8 : 0000000000000000 x7 : ffff0000101294cc x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 00000000ffffffff x2 : 0000000000000000 x1 : 387fc15c8ec0f200 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 __debug_check_no_obj_freed+0x19c/0x228 debug_check_no_obj_freed+0x1c/0x28 kfree+0x250/0x440 put_i2c_dev+0x68/0x78 i2cdev_detach_adapter+0x60/0xc8 i2cdev_notifier_call+0x3c/0x70 notifier_call_chain+0x8c/0xe8 blocking_notifier_call_chain+0x64/0x88 device_del+0x74/0x380 device_unregister+0x54/0x78 i2c_del_adapter+0x278/0x2d0 unittest_i2c_bus_remove+0x3c/0x80 platform_drv_remove+0x30/0x50 device_release_driver_internal+0xf4/0x1c0 driver_detach+0x58/0xa0 bus_remove_driver+0x84/0xd8 driver_unregister+0x34/0x60 platform_driver_unregister+0x20/0x30 of_unittest_overlay+0x8d4/0xbe0 of_unittest+0xae8/0xb3c do_one_initcall+0xac/0x450 do_initcall_level+0x208/0x224 kernel_init_freeable+0x2d8/0x36c kernel_init+0x18/0x108 ret_from_fork+0x10/0x1c irq event stamp: 3934661 hardirqs last enabled at (3934661): [<ffff00001009fa04>] debug_exception_exit+0x4c/0x58 hardirqs last disabled at (3934660): [<ffff00001009fb14>] debug_exception_enter+0xa4/0xe0 softirqs last enabled at (3934654): [<ffff000010081d94>] __do_softirq+0x46c/0x628 softirqs last disabled at (3934649): [<ffff0000100b4a1c>] irq_exit+0x104/0x118 This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the i2c_dev, and use the API provided by the commit 233ed09d7fda to make sure that the release of i2c_dev and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-13i2c: qcom-geni: Drop of_platform.h includeStephen Boyd1-1/+0
This driver doesn't call any DT platform functions like of_platform_*(). Remove the include as it isn't used. Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-13i2c: qcom-geni: Grow a dev pointer to simplify codeStephen Boyd1-31/+26
Some lines are long here. Use a struct dev pointer to shorten lines and simplify code. The clk_get() call can fail because of EPROBE_DEFER problems too, so just remove the error print message because it isn't useful. Finally, platform_get_irq() already prints an error so just remove that error message. Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-13i2c: qcom-geni: Let firmware specify irq trigger flagsStephen Boyd1-2/+2
We don't need to force IRQF_TRIGGER_HIGH here as the DT or ACPI tables should take care of this for us. Just use 0 instead so that we use the flags from the firmware. Also, remove specify dev_name() for the irq name so that we can get better information in /proc/interrupts about which device is generating interrupts. Cc: Alok Chauhan <alokc@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-13i2c: stm32f7: do not backup read-only PECR registerAlain Volmat1-4/+0
The PECR register provides received packet computed PEC value.  It makes no sense restoring its value after a reset, and anyway, as read-only register it cannot be restored. Fixes: ea6dd25deeb5 ("i2c: stm32f7: add PM_SLEEP suspend/resume support") Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-13i2c: acpi: put device when verifying client failsWolfram Sang1-1/+9
i2c_verify_client() can fail, so we need to put the device when that happens. Fixes: 525e6fabeae2 ("i2c / ACPI: add support for ACPI reconfigure notifications") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: gpio: suppress error on probe deferHamish Martin1-1/+1
If a GPIO we are trying to use is not available and we are deferring the probe, don't output an error message. This seems to have been the intent of commit 05c74778858d ("i2c: gpio: Add support for named gpios in DT") but the error was still output due to not checking the updated 'retdesc'. Fixes: 05c74778858d ("i2c: gpio: Add support for named gpios in DT") Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: smbus: remove outdated references to irq level triggersWolfram Sang1-5/+0
IRQ levels are now handled within the IRQ core. Remove the forgotten references from the documentation. Fixes: 9b9f2b8bc2ac ("i2c: i2c-smbus: Use threaded irq for smbalert") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: convert SMBus alert setup function to return an ERRPTRWolfram Sang5-24/+32
Only few drivers use this call, so drivers and I2C core are converted at once with this patch. By simply using i2c_new_client_device() instead of i2c_new_device(), we easily can return an ERRPTR for this function as well. To make out of tree users aware that something changed, the function is renamed to i2c_new_smbus_alert_device(). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: stm32f7: add a new st, stm32mp15-i2c compatibleAlain Volmat1-6/+33
Add a new stm32mp15 specific compatible to handle FastMode+ registers handling which is different on the stm32mp15 compared to the stm32f7 or stm32h7. Indeed, on the stm32mp15, the FastMode+ set and clear registers are separated while on the other platforms (F7 or H7) the control is done in a unique register. Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: stm32f7: disable/restore Fast Mode Plus bits in low power modesAlain Volmat1-13/+39
Defer the initial enabling of the Fast Mode Plus bits after the stm32f7_i2c_setup_timing call in probe function in order to avoid enabling them if speed is downgraded. Clear & restore the Fast Mode Plus bits in the suspend/resume handlers of the driver. Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: brcmstb: Support BCM2711 HDMI BSC controllersMaxime Ripard1-0/+33
The HDMI blocks in the BCM2771 have an i2c controller to retrieve the EDID. This block is split into two parts, the BSC and the AUTO_I2C, lying in two separate register areas. The AUTO_I2C block has a mailbox-like interface and will take away the BSC control from the CPU if enabled. However, the BSC is the actually the same controller than the one supported by the brcmstb driver, and the AUTO_I2C doesn't really bring any immediate benefit. Let's use the BSC then, but let's also tie the AUTO_I2C registers with a separate compatible so that we can enable AUTO_I2C if needed in the future. The AUTO_I2C is enabled by default at boot though, so we first need to release the BSC from the AUTO_I2C control. Cc: Kamal Dasu <kdasu.kdev@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-i2c@vger.kernel.org Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: omap: use devm_platform_ioremap_resource()chenqiwu1-3/+1
Use a new API devm_platform_ioremap_resource() to simplify code. Signed-off-by: chenqiwu <chenqiwu@xiaomi.com> Tested-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: use kobj_to_dev() APIchenqiwu1-2/+2
Use kobj_to_dev() API instead of container_of(). Signed-off-by: chenqiwu <chenqiwu@xiaomi.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-22 20:53:09 +0000