summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2016-10-11Merge tag 'tegra-for-4.8-i2c' of ↵Wolfram Sang1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into i2c/for-next [wsa: fell through the cracks, applied to 4.9 now] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> i2c: 'i2c-bus' node support for v4.8-rc1 This includes the device tree binding and I2C core changes to support the i2c-bus subnode that I2C masters can use to describe their slaves in a separate namespace and therefore avoid clashing with potentially other subnodes.
2016-10-07Merge branch 'i2c/for-4.9' of ↵Linus Torvalds68-1296/+1904
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Here is the 4.9 pull request from I2C including: - centralized error messages when registering to the core - improved lockdep annotations to prevent false positives - DT support for muxes, gates, and arbitrators - bus speeds can now be obtained from ACPI - i2c-octeon got refactored and now supports ThunderX SoCs, too - i2c-tegra and i2c-designware got a bigger bunch of updates - a couple of standard driver fixes and improvements" * 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (71 commits) i2c: axxia: disable clks in case of failure in probe i2c: octeon: thunderx: Limit register access retries i2c: uniphier-f: fix misdetection of incomplete STOP condition gpio: pca953x: variable 'id' was used twice i2c: i801: Add support for Kaby Lake PCH-H gpio: pca953x: fix an incorrect lockdep warning i2c: add a warning to i2c_adapter_depth() lockdep: make MAX_LOCKDEP_SUBCLASSES unconditionally visible i2c: export i2c_adapter_depth() i2c: rk3x: Fix variable 'min_total_ns' unused warning i2c: rk3x: Fix sparse warning i2c / ACPI: Do not touch an I2C device if it belongs to another adapter i2c: octeon: Fix high-level controller status check i2c: octeon: Avoid sending STOP during recovery i2c: octeon: Fix set SCL recovery function i2c: rcar: add support for r8a7796 (R-Car M3-W) i2c: imx: make bus recovery through pinctrl optional i2c: meson: add gxbb compatible string i2c: uniphier-f: set the adapter to master mode when probing i2c: uniphier-f: avoid WARN_ON() of clk_disable() in failure path ...
2016-10-02Merge branches 'acpi-wdat' and 'acpi-ec'Rafael J. Wysocki1-1/+3
* acpi-wdat: watchdog: wdat_wdt: Fix warning for using 0 as NULL watchdog: wdat_wdt: fix return value check in wdat_wdt_probe() platform/x86: intel_pmc_ipc: Do not create iTCO watchdog when WDAT table exists i2c: i801: Do not create iTCO watchdog when WDAT table exists mfd: lpc_ich: Do not create iTCO watchdog when WDAT table exists ACPI / watchdog: Add support for WDAT hardware watchdog * acpi-ec: ACPI / EC: Fix issues related to boot_ec ACPI / EC: Fix a gap that ECDT EC cannot handle EC events ACPI / EC: Fix a memory leakage issue in acpi_ec_add() ACPI / EC: Cleanup first_ec/boot_ec code ACPI / EC: Enable event freeze mode to improve event handling for suspend process ACPI / EC: Add PM operations to improve event handling for suspend process ACPI / EC: Add PM operations to improve event handling for resume process ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled ACPI / EC: Add EC_FLAGS_QUERY_ENABLED to reveal a hidden logic ACPI / EC: Add PM operations for suspend/resume noirq stage
2016-09-28i2c: i801: Do not create iTCO watchdog when WDAT table existsMika Westerberg1-1/+3
ACPI WDAT table is the preferred way to use hardware watchdog over the native iTCO_wdt. Windows only uses this table for its hardware watchdog implementation so we should be relatively safe to trust it has been validated by OEMs Prevent iTCO watchdog creation if we detect that there is ACPI WDAT table. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-24i2c: axxia: disable clks in case of failure in probeAlexey Khoroshilov1-2/+12
axxia_i2c_probe() does not disable clock in case of failure in i2c_add_adapter(). Also it ignores returned value from clk_prepare_enable(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-24i2c: octeon: thunderx: Limit register access retriesJan Glauber2-12/+19
Do not infinitely retry register readq and writeq operations in order to not lock up the CPU in case the TWSI gets stuck. Return -ETIMEDOUT in case of a failed data read. For all other cases just return so subsequent operations will fail. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-24i2c: uniphier-f: fix misdetection of incomplete STOP conditionMasahiro Yamada1-5/+11
Currently, the status register FI2C_SR is checked immediately after a STOP condition is issued in case of the deferred STOP condition. It takes typically 5-10 usec until the corresponding bits in the register are set, so the error check for "stop condition was not completed" is very likely to be false positive. Add wait code to relax the status register check. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-24i2c: i801: Add support for Kaby Lake PCH-HAndy Shevchenko1-0/+4
Intel Kaby Lake PCH-H has the same legacy SMBus host controller than Intel Sunrisepoint PCH. It also has same iTCO watchdog on the bus. Add Kaby Lake PCH-H PCI ID to the list of supported devices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-24i2c: add a warning to i2c_adapter_depth()Bartosz Golaszewski1-0/+3
This routine is only used together with lockdep for nested locking. The number of lock subclasses is limited to 8 as defined in lockdep.h Emit a warning if the adapter depth exceeds the maximum number of lockdep subclasses. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-24i2c: export i2c_adapter_depth()Bartosz Golaszewski1-7/+2
For crazy setups in which an i2c gpio expander is behind an i2c gpio multiplexer controlled by a gpio provided a second expander using the same device driver we need to explicitly tell lockdep how to handle nested locking. Export i2c_adapter_depth() as public API to be reused outside of i2c core code. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-22i2c: qup: skip qup_i2c_suspend if the device is already runtime suspendedSudeep Holla1-1/+2
If the i2c device is already runtime suspended, if qup_i2c_suspend is executed during suspend-to-idle or suspend-to-ram it will result in the following splat: WARNING: CPU: 3 PID: 1593 at drivers/clk/clk.c:476 clk_core_unprepare+0x80/0x90 Modules linked in: CPU: 3 PID: 1593 Comm: bash Tainted: G W 4.8.0-rc3 #14 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) PC is at clk_core_unprepare+0x80/0x90 LR is at clk_unprepare+0x28/0x40 pc : [<ffff0000086eecf0>] lr : [<ffff0000086f0c58>] pstate: 60000145 Call trace: clk_core_unprepare+0x80/0x90 qup_i2c_disable_clocks+0x2c/0x68 qup_i2c_suspend+0x10/0x20 platform_pm_suspend+0x24/0x68 ... This patch fixes the issue by executing qup_i2c_pm_suspend_runtime conditionally in qup_i2c_suspend. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2016-09-22i2c: rk3x: Fix variable 'min_total_ns' unused warningDavid Wu1-2/+1
This patch fixs the following warning: drivers/i2c/busses/i2c-rk3x.c: In function 'rk3x_i2c_v1_calc_timings': drivers/i2c/busses/i2c-rk3x.c:745:41: warning: variable 'min_total_ns' set but not used [-Wunused-but-set-variable] Reported-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-22i2c: rk3x: Fix sparse warningDavid Wu1-1/+1
This patch fixes the following sparse warning: drivers/i2c/busses/i2c-rk3x.c:888:17: warning: cast truncates bits from constant value (ffffffffff00 becomes ffffff00) Reported-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-22i2c / ACPI: Do not touch an I2C device if it belongs to another adapterMika Westerberg1-7/+20
When enumerating I2C devices connected to an I2C adapter we scan the whole namespace (as it is possible to have devices anywhere in that namespace, not just below the I2C adapter device) and add each found device to the I2C bus in question. Now after commit 525e6fabeae2 ("i2c / ACPI: add support for ACPI reconfigure notifications") checking of the adapter handle to the one found in the I2cSerialBus() resource was moved to happen after resources of the I2C device has been parsed. This means that if the I2cSerialBus() resource points to an adapter that does not exists in the system we still parse those resources. This is problematic in particular because acpi_dev_resource_interrupt() tries to configure GSI if the device also has an Interrupt() resource. Failing to do that results errrors like this to be printed on the console: [ 10.409490] ERROR: Unable to locate IOAPIC for GSI 37 To fix this we pass the I2C adapter to i2c_acpi_get_info() and make sure the handle matches the one in the I2cSerialBus() resource before doing anything else to the device. Reported-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-21i2c: mux: pca954x: retry updating the mux selection on failurePeter Rosin1-1/+1
The cached value of the last selected channel prevents retries on the next call, even on failure to update the selected channel. Fix that. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2016-09-21i2c: octeon: Fix high-level controller status checkJan Glauber1-9/+14
In case the high-level controller (HLC) is used the status code is reported at a different location. Check that location after HLC write operations if the ready bit is not set and return an appropriate error code instead of always returning -EAGAIN. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-21i2c: octeon: Avoid sending STOP during recoveryDmitry Bazhenov1-4/+14
Due to a bug in the ThunderX I2C hardware sending STOP during a recovery attempt could lock up the hardware. To work around this problem do not send STOP at the beginning of the recovery but use the override registers to bring the TWSI including the high-level controller out of the bad state. Signed-off-by: Dmitry Bazhenov <dmitry.bazhenov@auriga.com> Signed-off-by: Jan Glauber <jglauber@cavium.com> [Changed commit message] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-21i2c: octeon: Fix set SCL recovery functionDmitry Bazhenov1-1/+1
The set SCL recovery function unconditionally pulls the SCL line low. Only pull SCL line low according to val parameter. Signed-off-by: Dmitry Bazhenov <dmitry.bazhenov@auriga.com> Signed-off-by: Jan Glauber <jglauber@cavium.com> [Changed commit message] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-21i2c-eg20t: fix race between i2c init and interrupt enableYadi.hu1-7/+11
the eg20t driver call request_irq() function before the pch_base_address, base address of i2c controller's register, is assigned an effective value. there is one possible scenario that an interrupt which isn't inside eg20t arrives immediately after request_irq() is executed when i2c controller shares an interrupt number with others. since the interrupt handler pch_i2c_handler() has already active as shared action, it will be called and read its own register to determine if this interrupt is from itself. At that moment, since base address of i2c registers is not remapped in kernel space yet,so the INT handler will access an illegal address and then a error occurs. Signed-off-by: Yadi.hu <yadi.hu@windriver.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2016-09-16i2c: rcar: add support for r8a7796 (R-Car M3-W)Ulrich Hecht1-0/+1
Same as r8a7795. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-15i2c: imx: make bus recovery through pinctrl optionalYang Li1-9/+22
Since commit 1c4b6c3bcf30 ("i2c: imx: implement bus recovery") the driver starts to use gpio/pinctrl to support optional bus recovery feature. But pinctrl is not always usable. There are platforms such as ls1021a and ls1043a that don't support pinctrl, and it could just be broken due to old/broken device tree. The patch makes it really optional that the probe function won't bailout on pinctrl problems instead it just disables bus recovery and prints out notification when there is problem with pinctrl. Since pinctrl is only used by bus recovery in this driver, move pinctrl initialization into bus recovery init function to prevent confusion. Signed-off-by: Li Yang <leoyang.li@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-15i2c: meson: add gxbb compatible stringNeil Armstrong1-0/+1
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: rk3x: Restore clock settings at resume timeDoug Anderson1-0/+12
Depending on a number of factors including: - Which exact Rockchip SoC we're working with - How deep we suspend - Which i2c port we're on We might lose the state of the i2c registers at suspend time. Specifically we've found that on rk3399 the i2c ports that are not in the PMU power domain lose their state with the current suspend depth configured by ARM Tursted Firmware. Note that there are very few actual i2c registers that aren't configured per transfer anyway so all we actually need to re-configure are the clock config registers. We'll just add a call to rk3x_i2c_adapt_div() at resume time and be done with it. NOTE: On rk3399 on ports whose power was lost, I put printouts in at resume time. I saw things like: before: con=0x00010300, div=0x00060006 after: con=0x00010200, div=0x00180025 Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: David Wu <david.wu@rock-chips.com> Tested-by: David Wu <david.wu@rock-chips.com> [wsa: removed duplicate const] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: uniphier-f: set the adapter to master mode when probingMasahiro Yamada1-6/+10
Currently, the adapter is set to the master mode at the first use. Since then, it is kept in the slave mode, so unexpected glitch signals on the I2C lines may cause the adapter into insane state. Setting it to the master mode along with initialization solves the problem. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reported-by: Akio Noda <noda.akio@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: uniphier-f: avoid WARN_ON() of clk_disable() in failure pathMasahiro Yamada1-41/+32
If clk_prepare_enable() fails, clk_disable_unprepare() is called in the failure path, where the enable_count is still zero, so it hits WARN_ON(core->enable_count == 0) in the clk_core_disable(). To fix this, make the clock setting more linear in the probe function so that it can exploit "goto err" in case of error. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: uniphier: avoid WARN_ON() of clk_disable() in failure pathMasahiro Yamada1-42/+31
If clk_prepare_enable() fails, clk_disable_unprepare() is called in the failure path, where the enable_count is still zero, so it hits WARN_ON(core->enable_count == 0) in the clk_core_disable(). To fix this, make the clock setting more linear in the probe function so that it can exploit "goto err" in case of error. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: tegra: Fix assignment of boolean variablesJon Hunter1-2/+2
Fix the following warnings reported by coccinelle for the Tegra I2C driver. drivers/i2c/busses/i2c-tegra.c:513:2-23: WARNING: Assignment of bool to 0/1 drivers/i2c/busses/i2c-tegra.c:539:3-24: WARNING: Assignment of bool to 0/1 Reported-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: tegra: proper handling of error casesShardar Shariff Md1-2/+27
To summarize the issue observed in error cases: SW Flow: For i2c message transfer, packet header and data payload is posted and then required error/packet completion interrupts are enabled later. HW flow: HW process the packet just after packet header is posted, if ARB lost/NACK error occurs (SW will not handle immediately when error happens as error interrupts are not enabled at this point). HW assumes error is acknowledged and clears current data in FIFO, But SW here posts the remaining data payload which still stays in FIFO as stale data (data without packet header). Now once the interrupts are enabled, SW handles ARB lost/NACK error by clearing the ARB lost/NACK interrupt. Now HW assumes that SW attended the error and will parse/process stale data (data without packet header) present in FIFO which causes invalid NACK errors. Fix: Enable the error interrupts before posting the packet into FIFO which make sure HW to not clear the fifo. Also disable the packet mode before acknowledging errors (ARB lost/NACK error) to not process any stale data. As error interrupts are enabled before posting the packet header use spinlock to avoid preempting. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: tegra: use atomic poll function during configurationShardar Shariff Md1-2/+7
Use readl_poll_timeout_atomic() function as *wait_for_config_load() function can be called from interrupt context. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: tegra: add separate function for config_load programingShardar Shariff Md1-15/+26
Define separate function for configuration load register handling to make it use by different functions later. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: tegra: If fifo flush fails return errorShardar Shariff Md1-0/+2
During i2c controller initialization, when fifo flush fails return error instead of returning the error during exit. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: tegra: use readl_poll_timeout after config_load reg programmedShardar Shariff Md1-9/+14
After CONFIG_LOAD register is programmed instead of explicitly waiting for timeout, use readl_poll_timeout() to check for register value to get updated or wait till timeout. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: shmobile: Use ARCH_SHMOBILE instead of SUPERHGeert Uytterhoeven1-1/+1
"i2c-sh_mobile" is used on sh7343, sh7366, sh7722, sh7723, and sh7724 only. As all of the above select ARCH_SHMOBILE, restrict its driver dependencies from SUPERH to ARCH_SHMOBILE. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: Spelling s/acknowedge/acknowledge/Geert Uytterhoeven2-2/+2
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: designware: save the preset value of DW_IC_SDA_HOLDZhuo-hao Lee1-6/+10
There are several ways to set the SDA hold time for i2c controller, including: Device Tree, built-in device properties and ACPI. However, if the SDA hold time is not specified by above method, we should read the value, where it is preset by firmware, and save it to sda_hold_time. This is needed because when i2c controller enters runtime suspend, the DW_IC_SDA_HOLD value will be reset to chipset default value. And during runtime resume, i2c_dw_init will be called to reconfigure i2c controller. If sda_hold_time is zero, the chipset default hold time will be used, that will be too short for some platforms. Therefore, to have a better tolerance, the DW_IC_SDA_HOLD value should be kept by sda_hold_time. Signed-off-by: Zhuo-hao Lee <zhuo-hao.lee@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: mux: demux-pinctrl: run properly with multiple instancesWolfram Sang1-4/+10
We can't use a static property for all the changesets, so we now create dynamic ones for each changeset. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Fixes: 50a5ba87690814 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: core: put literals on one line in dev_*() callsAndy Shevchenko1-20/+23
It's better to have strings in the code like they appeared in the output. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: move locking operations to their own structPeter Rosin2-14/+24
This makes it trivial to constify them, so do that. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: tegra: Add pinctrl supportJon Hunter1-1/+6
On Tegra124/132 the pins for I2C6 are shared with the Display Port AUX (DPAUX) channel and on Tegra210 the pins for I2C4 and I2C6 are shared with DPAUX1 and DPAUX0, respectively. The multiplexing of the pins is handled by a register in the DPAUX and so the Tegra DPAUX driver has been updated to register a pinctrl device for managing these pins. The pins for these particular I2C devices are bound to the I2C device prior to probing. However, these I2C devices are in a different power partition to the DPAUX devices that own the pins. Hence, it is desirable to place the pins in the 'idle' state and allow the DPAUX power partition to switch off, when these I2C devices is not in use. Therefore, add calls to place the I2C pins in the 'default' and 'idle' states when the I2C device is runtime resumed and suspended, respectively. Please note that the pinctrl functions that set the state of the pins check to see if the devices has pins associated and will return zero if they do not. Therefore, it is safe to call these pinctrl functions even for I2C devices that do not have any pins associated. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: tegra: Add runtime power-management supportJon Hunter1-14/+46
Update the Tegra I2C driver to use runtime PM and move the code in the tegra_i2c_clock_enable/disable() functions to the PM runtime resume and suspend callbacks, respectively. Note that given that CONFIG_PM is not mandatory for Tegra, if CONFIG_PM is not enabled and so runtime PM is not enabled, ensure that the I2C clocks are turned on during probe and kept on by calling the resume callback directly. In the function tegra_i2c_init(), the variable 'err' does not need to be initialised to zero in tegra_i2c_init() because it is initialised when pm_runtime_get_sync() is called. Furthermore, to ensure we only return 0 from tegra_i2c_init(), it is necessary to re-initialise 'err' to 0 after a successful call to pm_runtime_get_sync() because it can return a positive value on success. However, alternatively re-initialise 'err' by using the return value of the function tegra_i2c_flush_fifos() because it can only be 0 or -ETIMEDOUT. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: tegra: Simplify I2C resumeJon Hunter1-8/+3
The I2C adapter is unlocked regardless of whether the tegra_i2c_init() called during the resume is successful or not. However, if the tegra_i2c_init() is not successful, then ->is_suspended is not set to false. Simplify the resume code by only setting ->is_suspended to false if tegra_i2c_init() is successful and return the error code from tegra_i2c_init(). Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: tegra: Use device name for adapter nameJon Hunter1-1/+1
All Tegra I2C devices have the name "Tegra I2C adapter" which is not very useful when viewing the I2C adapter names via the sysfs. Therefore, use the device name, which is unique for each I2C device, instead. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: tegra: Remove non device-tree supportJon Hunter1-9/+3
Tegra has only supported device-tree for platform/board configuration for quite some time now and so simplify the Tegra I2C driver by dropping code for non device-tree platforms/boards. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: tegra: Add missing new line charactersJon Hunter1-4/+4
Add missing new line characters for the various error messages. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: tegra: Fix missing blank lines after declarationsJon Hunter1-6/+13
Checkpatch warns about missing blank lines after declarations in the Tegra I2C driver and so fix these. Note that the initialisation of 'val' to zero in tegra_dvc_init() is unnecessary and so remove this. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: tegra: Use BIT macroJon Hunter1-33/+33
Checkpatch warns about spacing around the '<<' operator in the Tegra I2C driver and so fix these by converting the bit definitions that are using this operator to use the BIT macro. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: tegra: Fix lines over 80 charactersJon Hunter1-4/+6
Checkpatch warns about some lines over 80 characters in the Tegra I2C driver and so fix these. While we are at it, prefix the second instance of "STOP condition" in the comment with a "the". Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-26Merge branch 'i2c-mux-dt-3' of https://github.com/peda-r/i2c-mux into ↵Wolfram Sang4-22/+81
i2c/for-4.9 Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-26i2c: designware: do not disable adapter after transferLucas De Marchi1-18/+37
Disabling the adapter after each transfer adds additional delays for each I2C transfer. Even if we don't wait for it to be disabled anymore, on next transfer we will need to if we have several transfers in a row. Now during the transfer init we check if IC_TAR can be changed dynamically, the status register for no activity and TX buffer being empty. In this case we don't need to disable it When a transfer fails the adapter will still be disabled - this is a conservative approach. When transfers succeed, the adapter is left enabled and it's configured so to disable interrupts. Alternating register reads on 2 slaves: perf stat -r4 chrt -f 10 ./i2c-test /dev/i2c-1 25000 0x40 0x6 0x1e 0x00 Before: 8.638705161 seconds time elapsed ( +- 5.90% ) After: 7.516821591 seconds time elapsed ( +- 0.11% ) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Christian Ruppert <christian.ruppert@alitech.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-26i2c: designware: detect when dynamic tar update is possibleLucas De Marchi2-11/+35
This adapter can be synthesized with dynamic tar update enabled or disabled. When enabled it is not necessary to disable the adapter to change the slave address in some situations, which saves some time per transaction. There is no direct register to know if this feature is enabled but we can do it indirectly by writing to the 10BIT_ADDR field in IC_CON: this field is read only when dynamic tar update is enabled. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Christian Ruppert <christian.ruppert@alitech.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>