summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2018-02-04Merge branch 'i2c/for-4.16' of ↵Linus Torvalds28-454/+761
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has the following changes for you: - new flag to mark DMA safe buffers in i2c_msg. Also, some infrastructure around it. And docs. - huge refactoring of the at24 driver led by the new maintainer Bartosz - update I2C bus recovery to send STOP after recovery - conversion from gpio to gpiod for I2C bus recovery - adding a fault-injector to the i2c-gpio driver - lots of small driver improvements, and bigger ones to i2c-sh_mobile" * 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (99 commits) i2c: mv64xxx: Add myself as maintainer for this driver i2c: mv64xxx: Fix clock resource by adding an optional bus clock i2c: mv64xxx: Remove useless test before clk_disable_unprepare i2c: mxs: use true and false for boolean values i2c: meson: update doc description to fix build warnings i2c: meson: add configurable divider factors dt-bindings: i2c: update documentation for the Meson-AXG i2c: imx-lpi2c: add runtime pm support i2c: rcar: fix some trivial typos in comments i2c: davinci: fix the cpufreq transition i2c: rk3x: add proper kerneldoc header i2c: rk3x: account for const type of of_device_id.data i2c: acorn: remove outdated path from file header i2c: acorn: add MODULE_LICENSE tag i2c: rcar: implement bus recovery i2c: send STOP after successful bus recovery i2c: ensure SDA is released in recovery if SDA is controllable i2c: add 'set_sda' to bus_recovery_info i2c: add identifier in declarations for i2c_bus_recovery i2c: make kerneldoc about bus recovery more precise ...
2018-02-01Merge tag 'armsoc-soc' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "These are mostly minor bugfixes, cleanup and many defconfig updates to support added drivers. In particular OMAP and PXA keep cleaning up the legacy code base, as usual. Nvidia adds some more SoC support code for Tegra 186. For the first time on years, we are actually adding a non-DT platform for the EP93xx based Liebherr controller BK3.1. It's a minor variation of the EP93xx reference design and in active use, while EP93xx apparently doesn't have enough new development to have any device tree support" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: omap: hwmod: fix section mismatch warnings ARM: pxa/tosa-bt: add MODULE_LICENSE tag arm64: defconfig: enable CONFIG_ACPI_APEI_EINJ arm64: defconfig: enable EDAC GHES option arm64: defconfig: enable CONFIG_ACPI_APEI_MEMORY_FAILURE ARM: imx_v6_v7_defconfig: enable CONFIG_CPU_FREQ_STAT Wind down ARM/TANGO port ARM: davinci: constify gpio_led ARM: davinci: drop unneeded newline soc: Add SoC driver for Gemini ARM: SAMSUNG: Add SPDX license identifiers ARM: S5PV210: Add SPDX license identifiers ARM: S3C64XX: Add SPDX license identifiers ARM: S3C24XX: Add SPDX license identifiers ARM: EXYNOS: Add SPDX license identifiers ARM: imx: remove unused imx3 pm definitions ARM: imx: don't abort MMDC probe if power saving status doesn't match ARM: imx_v6_v7_defconfig: enable RTC_DRV_MXC_V2 ARM: imx_v6_v7_defconfig: Add missing config for DART-MX6 SoM ARM: davinci: Use PTR_ERR_OR_ZERO() ...
2018-01-29Merge tag 'pm-4.16-rc1' of ↵Linus Torvalds2-21/+20
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "This includes some infrastructure changes in the PM core, mostly related to integration between runtime PM and system-wide suspend and hibernation, plus some driver changes depending on them and fixes for issues in that area which have become quite apparent recently. Also included are changes making more x86-based systems use the Low Power Sleep S0 _DSM interface by default, which turned out to be necessary to handle power button wakeups from suspend-to-idle on Surface Pro3. On the cpufreq front we have fixes and cleanups in the core, some new hardware support, driver updates and the removal of some unused code from the CPU cooling thermal driver. Apart from this, the Operating Performance Points (OPP) framework is prepared to be used with power domains in the future and there is a usual bunch of assorted fixes and cleanups. Specifics: - Define a PM driver flag allowing drivers to request that their devices be left in suspend after system-wide transitions to the working state if possible and add support for it to the PCI bus type and the ACPI PM domain (Rafael Wysocki). - Make the PM core carry out optimizations for devices with driver PM flags set in some cases and make a few drivers set those flags (Rafael Wysocki). - Fix and clean up wrapper routines allowing runtime PM device callbacks to be re-used for system-wide PM, change the generic power domains (genpd) framework to stop using those routines incorrectly and fix up a driver depending on that behavior of genpd (Rafael Wysocki, Ulf Hansson, Geert Uytterhoeven). - Fix and clean up the PM core's device wakeup framework and re-factor system-wide PM core code related to device wakeup (Rafael Wysocki, Ulf Hansson, Brian Norris). - Make more x86-based systems use the Low Power Sleep S0 _DSM interface by default (to fix power button wakeup from suspend-to-idle on Surface Pro3) and add a kernel command line switch to tell it to ignore the system sleep blacklist in the ACPI core (Rafael Wysocki). - Fix a race condition related to cpufreq governor module removal and clean up the governor management code in the cpufreq core (Rafael Wysocki). - Drop the unused generic code related to the handling of the static power energy usage model in the CPU cooling thermal driver along with the corresponding documentation (Viresh Kumar). - Add mt2712 support to the Mediatek cpufreq driver (Andrew-sh Cheng). - Add a new operating point to the imx6ul and imx6q cpufreq drivers and switch the latter to using clk_bulk_get() (Anson Huang, Dong Aisheng). - Add support for multiple regulators to the TI cpufreq driver along with a new DT binding related to that and clean up that driver somewhat (Dave Gerlach). - Fix a powernv cpufreq driver regression leading to incorrect CPU frequency reporting, fix that driver to deal with non-continguous P-states correctly and clean it up (Gautham Shenoy, Shilpasri Bhat). - Add support for frequency scaling on Armada 37xx SoCs through the generic DT cpufreq driver (Gregory CLEMENT). - Fix error code paths in the mvebu cpufreq driver (Gregory CLEMENT). - Fix a transition delay setting regression in the longhaul cpufreq driver (Viresh Kumar). - Add Skylake X (server) support to the intel_pstate cpufreq driver and clean up that driver somewhat (Srinivas Pandruvada). - Clean up the cpufreq statistics collection code (Viresh Kumar). - Drop cluster terminology and dependency on physical_package_id from the PSCI driver and drop dependency on arm_big_little from the SCPI cpufreq driver (Sudeep Holla). - Add support for system-wide suspend and resume to the RAPL power capping driver and drop a redundant semicolon from it (Zhen Han, Luis de Bethencourt). - Make SPI domain validation (in the SCSI SPI transport driver) and system-wide suspend mutually exclusive as they rely on the same underlying mechanism and cannot be carried out at the same time (Bart Van Assche). - Fix the computation of the amount of memory to preallocate in the hibernation core and clean up one function in there (Rainer Fiebig, Kyungsik Lee). - Prepare the Operating Performance Points (OPP) framework for being used with power domains and clean up one function in it (Viresh Kumar, Wei Yongjun). - Clean up the generic sysfs interface for device PM (Andy Shevchenko). - Fix several minor issues in power management frameworks and clean them up a bit (Arvind Yadav, Bjorn Andersson, Geert Uytterhoeven, Gustavo Silva, Julia Lawall, Luis de Bethencourt, Paul Gortmaker, Sergey Senozhatsky, gaurav jindal). - Make it easier to disable PM via Kconfig (Mark Brown). - Clean up the cpupower and intel_pstate_tracer utilities (Doug Smythies, Laura Abbott)" * tag 'pm-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits) PCI / PM: Remove spurious semicolon cpufreq: scpi: remove arm_big_little dependency drivers: psci: remove cluster terminology and dependency on physical_package_id powercap: intel_rapl: Fix trailing semicolon dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit PM / runtime: Allow no callbacks in pm_runtime_force_suspend|resume() PM / hibernate: Drop unused parameter of enough_swap PM / runtime: Check ignore_children in pm_runtime_need_not_resume() PM / runtime: Rework pm_runtime_force_suspend/resume() PM / genpd: Stop/start devices without pm_runtime_force_suspend/resume() cpufreq: powernv: Dont assume distinct pstate values for nominal and pmin cpufreq: intel_pstate: Add Skylake servers support cpufreq: intel_pstate: Replace bxt_funcs with core_funcs platform/x86: surfacepro3: Support for wakeup from suspend-to-idle ACPI / PM: Use Low Power S0 Idle on more systems PM / wakeup: Print warn if device gets enabled as wakeup source during sleep PM / domains: Don't skip driver's ->suspend|resume_noirq() callbacks PM / core: Propagate wakeup_path status flag in __device_suspend_late() PM / core: Re-structure code for clearing the direct_complete flag powercap: add suspend and resume mechanism for SOC power limit ...
2018-01-26i2c: mv64xxx: Fix clock resource by adding an optional bus clockGregory CLEMENT1-1/+11
On Armada 7K/8K we need to explicitly enable the bus clock. The bus clock is optional because not all the SoCs need them but at least for Armada 7K/8K it is actually mandatory. The binding documentation is updating accordingly. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-26i2c: mv64xxx: Remove useless test before clk_disable_unprepareGregory CLEMENT1-6/+2
clk_disable_unprepare() already checks that the clock pointer is valid. No need to test it before calling it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-26i2c: mxs: use true and false for boolean valuesGustavo A. R. Silva1-2/+2
Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-26i2c: meson: update doc description to fix build warningsYixun Lan1-1/+1
Add description for 'data' parameter and drop unused 'irq' memeber. Here is the warnings: drivers/i2c/busses/i2c-meson.c:103: warning: No description found for parameter 'data' drivers/i2c/busses/i2c-meson.c:103: warning: Excess struct member 'irq' description in 'meson_i2c' Reported-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-24i2c: meson: add configurable divider factorsJian Hu1-4/+28
This patch try to add support for I2C controller in Meson-AXG SoC, Due to the IP changes between I2C controller, we need to introduce a compatible data to make the divider factor configurable. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jian Hu <jian.hu@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-24i2c: imx-lpi2c: add runtime pm supportFugang Duan1-17/+51
Add runtime pm support to dynamically manage the clock to avoid enable/disable clock in frequently that can improve the i2c bus transfer performance. And use pm_runtime_force_suspend/resume() instead of lpi2c_imx_suspend/resume(). Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-24i2c: rcar: fix some trivial typos in commentsWolfram Sang1-3/+3
Nothing big, but they get annoying after a while ;) Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-24i2c: davinci: fix the cpufreq transitionBartosz Golaszewski1-8/+4
i2c_davinci_cpufreq_transition() is implemented in a way that will block if it ever gets called while no transfer is in progress. Not only that, but reinit_completion() is never called for xfr_complete. Use the fact that cpufreq uses an srcu_notifier (running in process context) for transitions and that the bus_lock is taken during the call to master_xfer() and simplify the code by removing the transfer completion entirely and protecting i2c_davinci_cpufreq_transition() with i2c_lock/unlock_adapter(). Reported-by: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-18Merge branch 'pm-core'Rafael J. Wysocki2-21/+20
* pm-core: (29 commits) dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit PM / runtime: Allow no callbacks in pm_runtime_force_suspend|resume() PM / runtime: Check ignore_children in pm_runtime_need_not_resume() PM / runtime: Rework pm_runtime_force_suspend/resume() PM / wakeup: Print warn if device gets enabled as wakeup source during sleep PM / core: Propagate wakeup_path status flag in __device_suspend_late() PM / core: Re-structure code for clearing the direct_complete flag PM: i2c-designware-platdrv: Optimize power management PM: i2c-designware-platdrv: Use DPM_FLAG_SMART_PREPARE PM / mfd: intel-lpss: Use DPM_FLAG_SMART_SUSPEND PCI / PM: Use SMART_SUSPEND and LEAVE_SUSPENDED flags for PCIe ports PM / wakeup: Add device_set_wakeup_path() helper to control wakeup path PM / core: Assign the wakeup_path status flag in __device_prepare() PM / wakeup: Do not fail dev_pm_attach_wake_irq() unnecessarily PM / core: Direct DPM_FLAG_LEAVE_SUSPENDED handling PM / core: Direct DPM_FLAG_SMART_SUSPEND optimization PM / core: Add helpers for subsystem callback selection PM / wakeup: Drop redundant check from device_init_wakeup() PM / wakeup: Drop redundant check from device_set_wakeup_enable() PM / wakeup: only recommend "call"ing device_init_wakeup() once ...
2018-01-18i2c: rk3x: add proper kerneldoc headerWolfram Sang1-0/+1
gcc noticed the kerneldoc was wrongly formatted. Fix it! drivers/i2c/busses/i2c-rk3x.c:164: warning: Cannot understand * @grf_offset: ... on line 164 - I thought it was a doc line Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
2018-01-18i2c: rk3x: account for const type of of_device_id.dataJulia Lawall1-8/+8
This driver creates a number of const structures that it stores in the data field of an of_device_id array. The data field of an of_device_id structure has type const void *, so there is no need for a const-discarding cast when putting const values into such a structure. Furthermore, adding const to the declaration of the location that receives a const value from such a field ensures that the compiler will continue to check that the value is not modified. The const-discarding cast on the extraction from the data field is thus no longer needed. Done using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-18i2c: acorn: remove outdated path from file headerWolfram Sang1-3/+1
That path has gone away for a long time. Move the HW name upwards for a proper header. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-18i2c: acorn: add MODULE_LICENSE tagArnd Bergmann1-0/+4
As of v4.15, Kbuild warns about missing MODULE_LICENSE tags: WARNING: modpost: missing MODULE_LICENSE() in drivers/i2c/busses/i2c-acorn.o This adds a license, author and description tag, matching the comment at the start of the acorn i2c driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-17i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATAJeremy Compostella1-6/+7
On a I2C_SMBUS_I2C_BLOCK_DATA read request, if data->block[0] is greater than I2C_SMBUS_BLOCK_MAX + 1, the underlying I2C driver writes data out of the msgbuf1 array boundary. It is possible from a user application to run into that issue by calling the I2C_SMBUS ioctl with data.block[0] greater than I2C_SMBUS_BLOCK_MAX + 1. This patch makes the code compliant with Documentation/i2c/dev-interface by raising an error when the requested size is larger than 32 bytes. Call Trace: [<ffffffff8139f695>] dump_stack+0x67/0x92 [<ffffffff811802a4>] panic+0xc5/0x1eb [<ffffffff810ecb5f>] ? vprintk_default+0x1f/0x30 [<ffffffff817456d3>] ? i2cdev_ioctl_smbus+0x303/0x320 [<ffffffff8109a68b>] __stack_chk_fail+0x1b/0x20 [<ffffffff817456d3>] i2cdev_ioctl_smbus+0x303/0x320 [<ffffffff81745aed>] i2cdev_ioctl+0x4d/0x1e0 [<ffffffff811f761a>] do_vfs_ioctl+0x2ba/0x490 [<ffffffff81336e43>] ? security_file_ioctl+0x43/0x60 [<ffffffff811f7869>] SyS_ioctl+0x79/0x90 [<ffffffff81a22e97>] entry_SYSCALL_64_fastpath+0x12/0x6a Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-01-17i2c: core: decrease reference count of device node in i2c_unregister_deviceLixin Wang1-1/+5
Reference count of device node was increased in of_i2c_register_device, but without decreasing it in i2c_unregister_device. Then the added device node will never be released. Fix this by adding the of_node_put. Signed-off-by: Lixin Wang <alan.1.wang@nokia-sbell.com> Tested-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-01-16i2c: rcar: implement bus recoveryWolfram Sang1-2/+52
We can force levels of SCL and SDA, so we can use that for bus recovery. Note that we cannot read SDA back, because we will only get the internal state of the bus free detection. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-16i2c: send STOP after successful bus recoveryWolfram Sang1-0/+12
If we managed to get a client release SDA again, send a STOP afterwards to make sure we have a consistent state on the bus again. Tested-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-16i2c: ensure SDA is released in recovery if SDA is controllableWolfram Sang1-0/+2
If we have a function to control SDA, we should ensure that SDA is not held down by us. So, release the GPIO in this case. Tested-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-16i2c: add 'set_sda' to bus_recovery_infoWolfram Sang1-1/+10
This will be needed when we want to create STOP conditions, too, later. Create the needed fields and populate them for the GPIO case if the GPIO is set to output. Tested-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: exynos5: change internal transmission timeout to 100msAndrzej Hajda1-1/+1
Exynos-I2C uses default timeout of 1 second for the whole transaction, including re-transmissions due to arbitration lost errors (-EAGAIN). To allow re-transmissions driver's internal timeout should be significantly lower, 100ms seems to be good candidate. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: ismt: 16-byte align the DMA buffer addressRadu Rendec1-18/+19
Use only a portion of the data buffer for DMA transfers, which is always 16-byte aligned. This makes the DMA buffer address 16-byte aligned and compensates for spurious hardware parity errors that may appear when the DMA buffer address is not 16-byte aligned. The data buffer is enlarged in order to accommodate any possible 16-byte alignment offset and changes the DMA code to only use a portion of the data buffer, which is 16-byte aligned. The symptom of the hardware issue is the same as the one addressed in v3.12-rc2-5-gbf41691 and manifests by transfers failing with EIO, with bit 9 being set in the ERRSTS register. Signed-off-by: Radu Rendec <radu.rendec@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: mpc: always determine I2C clock prescaler at runtimeArseny Solokha1-22/+15
Remove the facility for setting the prescaler value at compile time entirely. It was only used for two SoCs, duplicating the actual value for one of them and setting sometimes bogus value for another. Make all MPC8xxx SoCs obtain their actual I2C clock prescaler from a single place in the code. Changes from v2: - left Device Tree compatibles in place Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: mpc: fix PORDEVSR2 mask for MPC8533/44Arseny Solokha1-2/+6
According to the reference manuals for the corresponding SoCs, SEC frequency ratio configuration is indicated by bit 26 of the POR Device Status Register 2. Consequently, SEC_CFG bit should be tested by mask 0x20, not 0x80. Testing the wrong bit leads to selection of wrong I2C clock prescaler on those SoCs. Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: mpc: unify obtaining the MPC8533/44 I2C clock prescaler w/ MPC8xxxArseny Solokha1-3/+9
Commit 8ce795cb0c6b ("i2c: mpc: assign the correct prescaler from SVR") introduced the common helper function for obtaining the actual clock prescaler value for MPC85xx. However, getting the prescaler for MPC8544 which depends on the SEC frequency ratio on this platform, has been always performed separately based on the corresponding Device Tree configuration. Move special handling of MPC8544 into that common helper. Make it dependent on the SoC version and not on Device Tree compatible node, as is the case with all other SoCs. Handle MPC8533 the same way which is similar to MPC8544 in this regard, according to AN2919 "Determining the I2C Frequency Divider Ratio for SCL". Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: mpc: get MPC8xxx I2C clock prescaler before using it in calculationsArseny Solokha1-6/+6
Obtaining the actual I2C clock prescaler value in mpc_i2c_setup_8xxx() only happens when the clock parameter is set to something other than MPC_I2C_CLOCK_LEGACY. When the clock parameter is exactly MPC_I2C_CLOCK_LEGACY, the prescaler parameter is used in arithmetic division as provided by the caller, resulting in a division by zero for the majority of processors supported by the module. Avoid division by zero by obtaining the actual I2C clock prescaler in mpc_i2c_setup_8xxx() unconditionally regardless of the passed clock value. Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: ismt: dump registers at the end of transactionsRadu Rendec1-0/+2
This patch dumps general and master registers at the end of transactions when debugging is enabled. Previously, registers were only dumped before submitting new descriptors (at the beginning of transactions). This helps debugging if some registers change as result of a failed transaction (e.g. bits are set in the ERRSTS general register). Signed-off-by: Radu Rendec <radu.rendec@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: sh_mobile: let r8a7790 (R-Car H2) use the new formulaWolfram Sang1-1/+1
Make use of the new formula for more precise bus frequencies. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: sh_mobile: add new frequency calculation for later SoCWolfram Sang1-1/+18
The formula to generate the desired bus speeds has changed a little over time. Implement the new formula and allow drivers to opt-in by changing to this new config set. Ensure in probe that we don't divide by zero. The returned values on a R-Car H2 (r8a7790/Lager board) match the suggested values in the datasheet. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: sh_mobile: add helper to check frequency calculationsWolfram Sang1-22/+27
Because we will add a second formula soon, put the sanity checks for the computed results into a separate function. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: sh_mobile: let RuntimePM do the clock handlingWolfram Sang1-18/+17
Start RuntimePM a bit earlier, so we can use it to enable the clock during probe for frequency calculations. Make sure it is enabled before calling setup(). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: sh_mobile: require setup callbackWolfram Sang1-9/+6
Require the setup callback and move the frequency calculation into it. This is in preparation for supporting multiple formulas. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: sh_mobile: allow setup callback to return errnoWolfram Sang1-4/+9
The setup callback will be more generic and, thus, need to be able to return error codes. Change the return type to 'int' for that. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: sh_mobile: move type detection upwardsWolfram Sang1-6/+4
For refactoring reasons, we will need this information before the setup callback. Also, simplify the comment to a oneliner. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-10PM: i2c-designware-platdrv: Optimize power managementRafael J. Wysocki2-21/+12
Optimize the power management in i2c-designware-platdrv by making it set the DPM_FLAG_SMART_SUSPEND and DPM_FLAG_LEAVE_SUSPENDED which allows some code to be dropped from its PM callbacks. First, setting DPM_FLAG_SMART_SUSPEND causes the intel-lpss driver to avoid resuming i2c-designware-platdrv devices in its ->prepare callback, so they can stay in runtime suspend after that point even if the direct-complete feature is not used for them. It also causes the ACPI PM domain and the PM core to avoid invoking "late" and "noirq" suspend callbacks for these devices if they are in runtime suspend at the beginning of the "late" phase of device suspend during system suspend. That guarantees dw_i2c_plat_suspend() to be called for a device only if it is not in runtime suspend. Moreover, it causes the device's runtime PM status to be set to "active" after calling dw_i2c_plat_resume() for it, so the driver doesn't need internal flags to avoid invoking either dw_i2c_plat_suspend() or dw_i2c_plat_resume() twice in a row. Second, setting DPM_FLAG_LEAVE_SUSPENDED enables the optimization allowing the device to stay suspended after system resume under suitable conditions, so again the driver doesn't need to take care of that by itself. Accordingly, the internal "suspended" and "skip_resume" flags used by the driver are not necessary any more, so drop them and simplify the driver's PM callbacks. Additionally, notice that dw_i2c_plat_complete() only needs to schedule runtime PM resume for the device if platform firmware has been involved in resuming the system, so make it call pm_resume_via_firmware() to check that. Also make it check the runtime PM status of the device instead of its direct_complete flag which also works if the device remained suspended due to the DPM_FLAG_LEAVE_SUSPENDED driver flag. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
2018-01-10PM: i2c-designware-platdrv: Use DPM_FLAG_SMART_PREPARERafael J. Wysocki1-1/+9
Modify i2c-designware-platdrv to set DPM_FLAG_SMART_PREPARE for its devices and return 0 from the system suspend ->prepare callback if the device has an ACPI companion object in order to tell the PM core and middle layers to avoid skipping system suspend/resume callbacks for the device in that case (which may be problematic, because the device may be accessed during suspend and resume of other devices via I2C operation regions then). Also the pm_runtime_suspended() check in dw_i2c_plat_prepare() is not necessary any more, because the core does it when setting power.direct_complete for the device, so drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
2018-01-04Merge tag 'pxa-for-4.16' of https://github.com/rjarzmik/linux into next/socOlof Johansson2-2/+2
This is the pxa changes for v4.16 cycle. It is : - the conversion to the new parser sharpslpart parser for the Sharp variants - an I2C platform data cleanup for PXA - a gpioreg switch of one register for lubbock * tag 'pxa-for-4.16' of https://github.com/rjarzmik/linux: ARM: pxa/lubbock: add GPIO driver for LUB_MISC_WR register ARM: pxa/poodle: Remove hardcoded partitioning, use sharpslpart parser ARM: pxa/spitz: Remove hardcoded partitioning, use sharpslpart parser ARM: pxa/tosa: Remove hardcoded partitioning, use sharpslpart parser ARM: pxa/corgi: Remove hardcoded partitioning, use sharpslpart parser ARM: pxa: move header file out of I2C realm ARM: pxa: move declarations to proper place Signed-off-by: Olof Johansson <olof@lixom.net>
2018-01-04i2c: gpio: Enable working over slow can_sleep GPIOsJan Kundrát1-4/+7
"Slow" GPIOs (usually those connected over an SPI or an I2C bus) are, well, slow in their operation. It is generally a good idea to avoid using them for time-critical operation, but sometimes the hardware just sucks, and the software has to cope. In addition to that, the I2C bus itself does not actually define any strict timing limits; the bus is free to go all the way down to DC. The timeouts (and therefore the slowest acceptable frequency) are present only in SMBus. The `can_sleep` is IMHO a wrong concept to use here. My SPI-to-quad-UART chip (MAX14830) is connected via a 26MHz SPI bus, and it happily drives SCL at 200kHz (5µs pulses) during my benchmarks. That's faster than the maximal allowed speed of the traditional I2C. The previous version of this code did not really block operation over slow GPIO pins, anyway. Instead, it just resorted to printing a warning with a backtrace each time a GPIO pin was accessed, thereby slowing things down even more. Finally, it's not just me. A similar patch was originally submitted in 2015 [1]. [1] https://patchwork.ozlabs.org/patch/450956/ Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-04i2c: mediatek: Enable i2c module clock before i2c registers access.Jun Gao1-0/+9
Make sure i2c module clock has been enabled before i2c registers access. Signed-off-by: Jun Gao <jun.gao@mediatek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-04i2c: mediatek: Add i2c compatible for MediaTek MT2712Jun Gao1-4/+27
Add i2c compatible for MT2712. Compare to MT8173 i2c controller, internal divider of i2c source clock need to be configured for MT2712 i2c speed calculation. Signed-off-by: Jun Gao <jun.gao@mediatek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-03Merge tag 'at24-4.16-updates-for-wolfram' of ↵Wolfram Sang5-5/+8
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-4.16 "AT24 updates for 4.16 merge window The driver has been converted to using regmap instead of raw i2c and smbus calls which shrank the code significantly. Device tree binding document has been cleaned up. Device tree support in the driver has been improved and we now support all at24 models as well as two new DT properties (no-read-rollover and wp-gpios). We no longer user unreadable magic values for driver data as the way it was implemented caused problems for some EEPROM models - we switched to regular structs. Aside from that, there's a bunch of coding style fixes and minor improvements all over the place."
2017-12-31Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into ↵Wolfram Sang5-7/+45
i2c/for-4.16 "A couple of patches this time. Just some more compatibles for the pca954x driver and an error handling tweak for the reg driver."
2017-12-31i2c: ismt: Use %pad specifier for dma_addr_t variablesAndy Shevchenko1-2/+1
...which takes care of proper format and size of the value. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-12-31i2c: algo-bit: init the bus to a known stateWolfram Sang1-0/+5
Ensure the bus is free when we register the adapter. Before the SCL/SDA wires were in an unknown state. It used to work because sending a byte has a retry mechanism which was triggered if the bus was initially in a non-free state. But the graceful way to do it is to initialize correctly. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-12-31i2c/ARM: davinci: Deep refactoring of I2C recoveryLinus Walleij1-10/+11
Alter the DaVinci GPIO recovery fetch to use descriptors all the way down into the board files. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sekhar Nori <nsekhar@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-12-30i2c: mux: reg: don't log an error for probe deferralTomasz Bachorski1-0/+3
It's possible that i2c_mux_reg_probe_dt() could return -EPROBE_DEFER. In that case, driver will request a probe deferral and an error suggesting device tree parsing problem will be reported. This is a pretty confusing information. Let's change the error handling, so driver will be able to request probe deferral without logging not related errors. Signed-off-by: Tomasz Bachorski <tomasz.bachorski@nokia.com> Signed-off-by: Peter Rosin <peda@axentia.se>
2017-12-30i2c: mux: pca954x: add support for NXP PCA984x familyAdrian Fiergolski2-7/+37
This patch extends the current i2c-mux-pca954x driver and adds support for a newer PCA984x family of the I2C switches and multiplexers from NXP. Signed-off-by: Adrian Fiergolski <adrian.fiergolski@cern.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Rosin <peda@axentia.se>
2017-12-12i2c: imx: Include the right GPIO headerLinus Walleij1-1/+1
<linux/of_gpio.h> is not used in this file, by <linux/gpio/consumer.h> is. Someone is just lucky with their implicit includes. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>