summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2012-04-27i2c: mxs: disable QUEUE when sending is doneWolfram Sang1-2/+3
Since the last fixes to this driver ensure now the queue termination is done correctly, we can finally disable the queue after a transfer without problems. The gain is that it will only be reenabled after the next transfer is fully set up. Before, the queue was running all the time and if the setup of the next message was interrupted by another thread, an incomplete buffer could have been sent, padded with zeroes. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-04-25i2c: mxs: handle spurious interruptWolfram Sang1-2/+1
After an error interrupt setting cmd->err, I see another interrupt that the data engine is empty which clears cmd->err before being processed. So, clear cmd->err at the beginning of a transfer only to handle these consecutive interrupts. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-04-22i2c-eg20t: Modify MODULE_AUTHOR's email addressTomoya MORINAGA1-1/+1
Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-04-22i2c-eg20t: change timeout value 50msec to 1000msecTomoya MORINAGA1-1/+1
Currently, during i2c works alone, wait-event timeout is not occurred. However, as CPU load increases, timeout occurs frequently. So, I modified like this patch. Modifying like this patch, I've never seen the timeout event with high load test. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-04-22i2c: tegra: Add delay before resetting the controller after NACKAlok Chauhan1-0/+8
NACK interrupt is generated before I2C controller generates the STOP condition on bus. Because of this reset of controller is happening before I2C controller could complete STOP condition. So wait for some time before resetting the controller so that STOP condition has delivered properly on bus. Added delay of 2 clock period before resetting the controller in case of NACK error. Signed-off-by: Alok Chauhan <alokc@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> [wsa: Reworded the commit msg and code comment a bit] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-04-22i2c: pnx: Disable clk in suspendRoland Stigge1-2/+1
In the driver's suspend function, clk_enable() was used instead of clk_disable(). This is corrected with this patch. Signed-off-by: Roland Stigge <stigge@antcom.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> CC: stable@vger.kernel.org [wsa: reworded commit header slightly] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-04-10i2c: prevent spurious interrupt on Designware controllersKristen Carlson Accardi1-1/+0
Don't call i2c_enable on resume because it causes a spurious interrupt. Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28Merge branch 'i2c-for-linus' of ↵Linus Torvalds14-51/+42
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull i2c updates from Jean Delvare. Fix up trivial conflict in drivers/i2c/busses/i2c-gpio.c due to include file cleanup clashing with DT support addition (which did the same cleanup) * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-algo-bit: Don't resched on clock stretching i2c: Update the FSF address i2c: Convert drivers/i2c/muxes/* to use module_i2c_driver() i2c-i801: Use usleep_range to wait for command completion i2c-i801: Add device IDs for Intel Lynx Point i2c-isch: Decrease delay in command completion check loop i2c-gpio: Use linux/gpio.h rather than asm/gpio.h
2012-03-28Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-22/+76
Pull "ARM: More device tree support updates" from Olof Johansson: "This branch contains a number of updates for device tree support on several ARM platforms, in particular: * AT91 continues the device tree conversion adding support for a number of on-chip drivers and other functionality * ux500 adds probing of some of the core SoC blocks through device tree * Initial device tree support for ST SPEAr600 platforms * kirkwood continues the conversion to device-tree probing" Manually merge arch/arm/mach-ux500/Kconfig due to MACH_U8500 rename, and drivers/usb/gadget/at91_udc.c due to header file include cleanups. Also do an "evil merge" for the MACH_U8500 config option rename that the affected RMI4 touchscreen driver in staging. It's called MACH_MOP500 now, and it was missed during previous merges. * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) ARM: SPEAr600: Add device-tree support to SPEAr600 boards ARM: ux500: Provide local timer support for Device Tree ARM: ux500: Enable PL022 SSP Controller in Device Tree ARM: ux500: Enable PL310 Level 2 Cache Controller in Device Tree ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree ARM: ux500: db8500: list most devices in the snowball device tree ARM: ux500: split dts file for snowball into generic part ARM: ux500: combine the board init functions for DT boot ARM: ux500: Initial Device Tree support for Snowball ARM: ux500: CONFIG: Enable Device Tree support for future endeavours ARM: kirkwood: use devicetree for rtc-mv ARM: kirkwood: rtc-mv devicetree bindings ARM: kirkwood: fdt: define uart[01] as disabled, enable uart0 ARM: kirkwood: fdt: facilitate new boards during fdt migration ARM: kirkwood: fdt: absorb kirkwood_init() ARM: kirkwood: fdt: use mrvl ticker symbol ARM: orion: wdt: use resource vice direct access ARM: Kirkwood: Remove tclk from kirkwood_asoc_platform_data. ARM: orion: spi: remove enable_clock_fix which is not used ...
2012-03-28Remove all #inclusions of asm/system.hDavid Howells1-1/+0
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-27Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-21/+74
Pull "ARM: device tree work" from Arnd Bergmann: "Most of these patches convert code from using static platform data to describing the hardware in the device tree. This is only the first half of the changes for v3.4 because a lot of patches for this topic came in the last week before the merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fix up trivial conflicts in arch/arm/mach-vexpress/{Kconfig,core.h} * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (86 commits) Document: devicetree: add OF documents for arch-mmp ARM: dts: append DTS file of pxa168 ARM: mmp: append OF support on pxa168 ARM: mmp: enable rtc clk in pxa168 i2c: pxa: add OF support serial: pxa: add OF support arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board ARM: OMAP2+: Remove extra ifdefs for board-generic ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected ASoC: DT: Add digital microphone binding to PAZ00 board. ARM: dt: Add ARM PMU to tegra*.dtsi ARM: at91: at91sam9x5cm/dt: add leds support ARM: at91: usb_a9g20/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add leds support ARM: at91: usb_a9g20/dt: add leds support ARM: at91/pio: add new PIO3 features ARM: at91: add sam9_smc.o to at91sam9x5 build ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter ARM: at91/tc: add device tree support to atmel_tclib ...
2012-03-27Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-2/+2
Pull "ARM: driver specific updates" from Arnd Bergmann: "These are all specific to some driver. They are typically the platform side of a change in the drivers directory, such as adding a new driver or extending the interface to the platform. In cases where there is no maintainer for the driver, or the maintainer prefers to have the platform changes in the same branch as the driver changes, the patches to the drivers are included as well. A much smaller set of driver updates that depend on other branches getting merged first will be sent later. The new export of tegra_chip_uid conflicts with other changes in fuse.c. In rtc-sa1100.c, the global removal of IRQF_DISABLED conflicts with the cleanup of the interrupt handling of that driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fixed up aforementioned trivial conflicts. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits) ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci mmc: sdhci-s3c: add platform data for the second capability ARM: SAMSUNG: support the second capability for samsung-soc ARM: EXYNOS: add support DMA for EXYNOS4X12 SoC ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1 ARM: EXYNOS: Enable MDMA driver regulator: Remove bq24022 regulator driver rtc: sa1100: add OF support pxa: magician/hx4700: Convert to gpio-regulator from bq24022 ARM: OMAP3+: SmartReflex: fix error handling ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API ARM: OMAP3+: SmartReflex: micro-optimization for sanity check ARM: OMAP3+: SmartReflex: misc cleanups ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata() ARM: OMAP3+: hwmod: add SmartReflex IRQs ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register ARM: OMAP3+: SmartReflex: Add a shutdown hook ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP ... Conflicts: arch/arm/mach-tegra/Makefile arch/arm/mach-tegra/fuse.c drivers/rtc/rtc-sa1100.c
2012-03-26i2c-algo-bit: Don't resched on clock stretchingJean Delvare1-1/+1
Clock stretching is not supposed to last long, so asking to be rescheduled while waiting for the clock line to be released by a slave makes little sense. Odds are that the clock line will long have been released when we run again, so we will have lost time and may even get an SMBus timeout because of this. So just busy-wait in that case. This also participates in the effort to make i2c-algo-bit usable in contexts that can't sleep. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ben Skeggs <bskeggs@redhat.com>
2012-03-26i2c: Update the FSF addressJean Delvare9-9/+18
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-26i2c: Convert drivers/i2c/muxes/* to use module_i2c_driver()Axel Lin2-24/+2
This patch converts the drivers in drivers/i2c/muxes/* to use the module_i2c_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Michael Lawnick <ml.lawnick@gmx.de> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-26i2c-i801: Use usleep_range to wait for command completionJean Delvare1-12/+12
Use usleep_range instead of msleep when waiting for command completion. Most SMBus commands complete in less than 2 jiffies so this brings a pleasant performance boost. Strongly inspired from a similar change by Olivier Sobrie to the i2c-isch driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Olivier Sobrie <olivier@sobrie.be>
2012-03-26i2c-i801: Add device IDs for Intel Lynx PointSeth Heasley2-0/+4
Add the SMBus controller device IDs for the Intel Lynx Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-26i2c-isch: Decrease delay in command completion check loopOlivier Sobrie1-5/+5
Generally it is not needed to wait for 1 msec, the SMBus get often ready in less than 200 usecs. msleep(1) can wait up to 20 msecs... It has a significant impact when there is a burst of transactions on the bus. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-26i2c-gpio: Use linux/gpio.h rather than asm/gpio.hMark Brown1-2/+1
Direct inclusion of asm/gpio.h has been deprecated for a while now due to the cross platform gpiolib. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-23Merge branch 'i2c-embedded/for-3.4' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds11-60/+864
Pull i2c embedded updates from Wolfram Sang: "Nothing special from i2c-embedded for this merge window. Two new drivers, minor feature additions, bugfixes, cleanups. All patches have been in linux-next for some time, too." * 'i2c-embedded/for-3.4' of git://git.pengutronix.de/git/wsa/linux: i2c-eg20t: Remove write-only variables i2c-eg20t: Rework pch_i2c_wait_for_bus_idle to reduce wait time i2c-s3c2410: Add stub runtime power management i2c-s3c2410: Convert to devm_kzalloc() i2c: add CSR SiRFprimaII on-chip I2C controllers driver i2c: tegra: Remove unnecessary write to INT_STATUS i2c: imx: fix imx driver to work though signal is pending i2c: designware: dw_i2c_init_driver as subsys initcall misc: at24: describe platform_data with kernel_doc i2c: Move I2C_EG20T option to the right place. i2c: Support for Netlogic XLR/XLS I2C controller. i2c: mpc: Add support for SMBUS_READ_BLOCK_DATA i2c: versatile: Add Device Tree support
2012-03-22Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-1/+2
Pull drm main changes from Dave Airlie: "This is the main drm pull request, I'm probably going to send two more smaller ones, will explain below. This contains a patch that is also in the fbdev tree, but it should be the same patch, it added an API for hot unplugging framebuffer devices, and I need that API for a new driver. It also contains some changes to the i2c tree which Jean has acked, and one change to moorestown platform stuff in x86. Highlights: - new drivers: UDL driver for USB displaylink devices, kms only, should support correct hotplug operations. - core: i2c speedups + better hotplug support, EDID overriding via firmware interface - allows user to load a firmware for a broken monitor/kvm from userspace, it even has documentation for it. - exynos: new HDMI audio + hdmi 1.4 + virtual output driver - gma500: code cleanup - radeon: cleanups, CS optimisations, streamout support and pageflip fix - nouveau: NVD9 displayport support + more reclocking work - i915: re-enabling GMBUS, finish gpu patch (might help hibernation who knows), missed irq fixes, stencil tiling fixes, interlaced support, aliasesd PPGTT support for SNB/IVB, swizzling for SNB/IVB, semaphore fixes As well as the usual bunch of cleanups and fixes all over the place. I've got two things I'd like to merge a bit later: a) AMD support for all their new radeonhd 7000 series GPU and APUs. AMD dropped this a bit late due to insane internal review processes, (please AMD just follow Intel and let open source guys ship stuff early) however I don't want to penalise people who own this hardware (since its been on sale for 3-4 months and GPU hw doesn't exactly have a lifetime in years) and consign them to using closed drivers for longer than necessary. The changes are well contained and just plug into the driver new gpu functionality so they should be fairly regression proof. I just want to give them a bit of a run on the hw AMD kindly sent me. b) drm prime/dma-buf interface code. This is just infrastructure code to expose the dma-buf stuff to drm drivers and to userspace. I'm not planning on pushing any driver support in this cycle (except maybe exynos), but I'd like to get the infrastructure code in so for the next cycle I can start getting the driver support into the individual drivers. We have started driver support for i915, nouveau and udl along with I think exynos and omap in staging. However this code relies on the dma-buf tree being pulled into your tree first since it needs the latest interfaces from that tree. I'll push to get that tree sent asap. (oh and any warnings you see in i915 are gcc's fault from what anyone can see)." Fix up trivial conflicts in arch/x86/platform/mrst/mrst.c due to the new msic_thermal_platform_data() thermal function being added next to the tc35876x_platform_data() i2c device function.. * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (326 commits) drm/i915: use DDC_ADDR instead of hard-coding it drm/radeon: use DDC_ADDR instead of hard-coding it drm: remove unneeded redefinition of DDC_ADDR drm/exynos: added virtual display driver. drm: allow loading an EDID as firmware to override broken monitor drm/exynos: enable hdmi audio feature drm/exynos: add default pixel format for plane drm/exynos: cleanup exynos_hdmi.h drm/exynos: add is_local member in exynos_drm_subdrv struct drm/exynos: add subdrv open/close functions drm/exynos: remove module of exynos drm subdrv drm/exynos: release pending pageflip events when closed drm/exynos: added new funtion to get/put dma address. drm/exynos: update gem and buffer framework. drm/exynos: added mode_fixup feature and code clean. drm/exynos: add HDMI version 1.4 support drm/exynos: remove exynos_mixer.h gma500: Fix mmap frambuffer drm/radeon: Drop radeon_gem_object_(un)pin. drm/radeon: Restrict offset for legacy display engine. ...
2012-03-20Merge tag 'drm-intel-next-2012-03-01' of ↵Dave Airlie1-1/+2
git://people.freedesktop.org/~danvet/drm-intel into drm-next * tag 'drm-intel-next-2012-03-01' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Only clear the GPU domains upon a successful finish drm/i915: reenable gmbus on gen3+ again drm/i915: i2c: unconditionally set up gpio fallback drm/i915: merge gmbus and gpio i2c adpater into one drm/i915: merge struct intel_gpio into struct intel_gmbus i2c: export bit-banging algo functions drm/nouveau: do a better job at hiding the NIH i2c bit-banging algo drm/i915: add dev_priv to intel_gmbus drm/i915: Fix single msg gmbus_xfers writes drm/i915: error_buffer->ring should be signed drm/i915: Silence the error message from i915_wait_request() drm/i915: use the new hdmi_force_audio enum more drm/i915: No need to search again after retiring requests drm/i915: Only bump refcnt on objects scheduled for eviction drm/i915/bios: Downgrade the "signature missing" DRM_ERROR to debug drm/i915: Ignore LVDS on hp t5745 and hp st5747 thin client drm/i915: Fixes distorted external screen image on HP 2730p
2012-03-16Merge branch 'at91-3.4-cleanup2-DT2' of ↵Arnd Bergmann1-22/+76
git://github.com/at91linux/linux-at91 into next/dt * 'at91-3.4-cleanup2-DT2' of git://github.com/at91linux/linux-at91: (23 commits) ARM: at91: dt: enable usb ehci for sam9g45 and sam9x5 ARM: at91: usb ehci add dt support ARM: at91: dt: enable usb ohci for sam9g20, sam9g45 amd sam9x5 ARM: at91: usb ohci add dt support ARM: at91: add Shutdown Controller (SHDWC) DT support ARM: at91: add ram controller DT support ARM: at91: add RSTC (Reset Controller) dt support ARM: at91: always enable sam9 restart ARM: at91: add pmc DT support ARM: at91/dt: add specific DT soc init ARM: at91/dt: add Calao DAB-MMX daugther board support for USB-A9G20 ARM: at91: sam9x5 add i2c DT support ARM: at91: sam9g45 add i2c DT support ARM: at91: usb_a9g20 add DT i2c support ARM: at91: sam9g20 add i2c DT support i2c/gpio: add DT support ARM: at91: sam9x5 add nand support atmel/nand: add DT support of/mtd/nand: add generic bindings and helpers of: introduce helper to manage boolean ...
2012-03-15i2c-algo-bit: Fix spurious SCL timeouts under heavy loadVille Syrjala1-1/+7
When the system is under heavy load, there can be a significant delay between the getscl() and time_after() calls inside sclhi(). That delay may cause the time_after() check to trigger after SCL has gone high, causing sclhi() to return -ETIMEDOUT. To fix the problem, double check that SCL is still low after the timeout has been reached, before deciding to return -ETIMEDOUT. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Cc: stable@vger.kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-15i2c-core: Comment says "transmitted" but means "received"Wolfram Sang1-4/+8
Fix that. Also convert this and the related comment to proper commenting style. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-15i2c/gpio: add DT supportJean-Christophe PLAGNIOL-VILLARD1-22/+76
To achieve DT support, we need to populate a custom platform_data in a private struct from DT information. To simplify code, the adapter and algorithm are also put into the private struct. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-08Merge branch 'regulator' of git://github.com/hzhuang1/linux into next/driversOlof Johansson1-3/+10
* 'regulator' of git://github.com/hzhuang1/linux: (2 commits) regulator: Remove bq24022 regulator driver pxa: magician/hx4700: Convert to gpio-regulator from bq24022 (plus update to v3.3-rc6)
2012-03-07i2c-eg20t: Remove write-only variablesAlexander Stein1-8/+0
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-03-07i2c-eg20t: Rework pch_i2c_wait_for_bus_idle to reduce wait timeAlexander Stein1-15/+21
If you insert several i2c transfers, the driver might start the next one while the STOP bit of the previous transfer is still on the bus, marking the bus as busy. pch_i2c_wait_for_bus_idle does an msleep(20) delaying the next transfer by >=20ms. Reduce wait time by actively waiting 5 us once, then using usleep_range. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-03-07i2c-s3c2410: Add stub runtime power managementMark Brown1-0/+10
Add stub runtime_pm calls which go through the flow of enabling and disabling but don't actually do anything with the device itself as there's nothing useful we can do. This provides the core PM framework with information about when the device is idle, enabling chip wide power savings. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-03-07i2c-s3c2410: Convert to devm_kzalloc()Mark Brown1-3/+1
Saves remembering to call kfree(). There's some kfree()s used by the resource still, these will be removed in 3.3 using the newly added devm_request_and_ioremap(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-03-07i2c: add CSR SiRFprimaII on-chip I2C controllers driverZhiwu Song3-0/+470
SiRFprimaII is the latest generation application processor from CSR’s multi-function SoC product family. The SoC support codes are in arch/arm/mach-prima2 from Linux mainline 3.0. There are two I2C controllers on primaII, features include: * Two I2C controller modules are on chip * RISC I/O bus read write register * Up to 16 bytes data buffer for issuing commands and writing data at the same time * Up to 16 commands, and receiving read data 16 bytes at a time * Error INT report (ACK check) * No-ACK bus protocols (SCCB bus protocols) Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Xiangzhen Ye <Xiangzhen.Ye@csr.com> Signed-off-by: Yuping Luo <Yuping.Luo@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-03-07i2c: tegra: Remove unnecessary write to INT_STATUSAlok Chauhan1-1/+0
The write is not necessary and may cause the I2C controller to misbehave. With this fix, I2C on Tegra30 works (at least, running i2cdump repeatedly on the WM8903 on Cardhu's I2C5/DVC bus). Signed-off-by: Alok Chauhan <alokc@nvidia.com> [swarren: Reworded commit description] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-03-07i2c: pxa: add OF supportHaojian Zhuang1-21/+74
Append these properties in below. mrvl,i2c-polling mrvl,i2c-fast-mode Still keep slave, slave_addr and class in platform data. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-02-29i2c: export bit-banging algo functionsDaniel Vetter1-1/+2
i915 has a hw i2c controller (gmbus) but for a bunch of stupid reasons we need to be able to fall back to the bit-banging algo on gpio pins. The current code sets up a 2nd i2c controller for the same i2c bus using the bit-banging algo. This has a bunch of issues, the major one being that userspace can directly access this fallback i2c adaptor behind the drivers back. But we need to frob a few registers before and after using fallback gpio bit-banging, so this horribly fails. The new plan is to only set up one i2c adaptor and transparently fall back to bit-banging by directly calling the xfer function of the bit- banging algo in the i2c core. To make that possible, export the 2 i2c algo functions. v2: As suggested by Jean Delvare, simply export the i2c_bit_algo vtable instead of the individual functions. Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-29i2c: imx: fix imx driver to work though signal is pendingOskar Schirmer1-5/+0
Interrupt a test application for I2C based mc13xxx driven touch panel, SIGINT, causes open event file descriptor to be closed, which in turn causes I2C activity to mask PMIC local interrupts. This eventually ends up in i2c_imx_bus_busy to wait for some busy flag to toggle, but while waiting it would find a signal pending and break. The final symptom is the device is not closed down cleanly and thus not reopenable. Do without check for pending signal. Signed-off-by: Oskar Schirmer <oskar@scara.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-02-29i2c: designware: dw_i2c_init_driver as subsys initcallPratyush Anand1-1/+1
There are few drivers which are available on i2c bus but have been initialized with subsys_initcall. Also as I2C is a bus driver, it should be available as early as possible. Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> [wsa: Slightly updated the commit message] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-02-24i2c: mxs: only flag completion when queue is completely doneWolfram Sang1-3/+10
The hardware generates an interrupt for every completed command in the queue while the code assumed that it will only generate one interrupt when the queue is empty. So, explicitly check if the queue is really empty. This patch fixed problems which occurred due to high traffic on the bus. While we are here, move the completion-initialization after the parameter error checking. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Lothar Waßmann <LW@KARO-electronics.de> Cc: stable@kernel.org
2012-02-24i2c: Move I2C_EG20T option to the right place.Jayachandran C2-16/+16
Move Kconfig option for I2C_EG20T to the correct position and keep the options sorted. Also, use tabs in Makefile and move the I2C_EG20T entry to its position. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-02-24i2c: Support for Netlogic XLR/XLS I2C controller.Ganesan Ramalingam3-0/+289
Add support for the intergrated I2C controller on Netlogic XLR/XLS MIPS SoC. The changes are to add a new file i2c/buses/i2c-xlr.c, containing the i2c bus implementation, and to update i2c/buses/{Kconfig,Makefile} to add the CONFIG_I2C_XLR option. Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-02-24i2c: mpc: Add support for SMBUS_READ_BLOCK_DATATang Yuantian1-14/+49
Add support for SMBUS_READ_BLOCK_DATA to the i2c-mpc bus driver. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-02-24i2c: versatile: Add Device Tree supportPawel Moll1-0/+10
This patch adds Device Tree binding ("arm,versatile-i2c") and basic support (bus population) to versatile-i2c driver. Signed-off-by: Pawel Moll <pawel.moll@arm.com> [wsa: constified match-table] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-02-22Merge branch 'lpc32xx/drivers' into next/driversArnd Bergmann2-2/+2
* lpc32xx/drivers: (566 commits) ARM: LPC32xx: ADC support for mach-lpc32xx Includes an update to Linux 3.3-rc4 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-13Merge branch 'fixes' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra: ARM: tegra: paz00: fix wrong UART port on mini-pcie plug ARM: tegra: paz00: fix wrong SD1 power gpio i2c: tegra: Add devexit_p() for remove ARM: tegra: dma: fix buildbreak for !CONFIG_TEGRA_SYSTEM_DMA
2012-02-06i2c: tegra: Add devexit_p() for removeShubhrajyoti Datta1-1/+1
It was originally missed in the __devinit/__devexit annotations. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-02-01i2c: imx: add clk_prepare/clk_unprepareRichard Zhao1-2/+2
It's for migrating to generic clk framework API. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-01-20i2c: OMAP: Fix OMAP1 build errorCousson, Benoit1-1/+1
CONFIG_OF is not defined for OMAP1 yet and thus the omap1_defconfig build generate an error for 3.3-rc1. drivers/i2c/busses/i2c-omap.c: In function 'omap_i2c_probe': drivers/i2c/busses/i2c-omap.c:1021:26: error: 'omap_i2c_of_match' undeclared (first use in this function) drivers/i2c/busses/i2c-omap.c:1021:26: note: each undeclared identifier is reported only once for each function it appears in Wrap omap_i2c_of_match with of_match_ptr() to prevent compilation error in case of OMAP1 build. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-01-17Merge branches 'for-33/i2c/eg20t' and 'for-33/i2c/omap' into for-linus/i2c-33Ben Dooks1-40/+70
2012-01-17i2c-eg20t: Change-company-name-OKI-SEMICONDUCTOR to LAPIS SemiconductorTomoya MORINAGA1-6/+6
On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 10:44:14 +0000