summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2018-04-18i2c: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven1-3/+0
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-07Merge branch 'i2c/for-4.17' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: -I2C core now reports proper OF style module alias. I'd like to repeat the note from the commit msg here (Thanks, Javier!): NOTE: This patch may break out-of-tree drivers that were relying on this behavior, and only had an I2C device ID table even when the device was registered via OF. There are no remaining drivers in mainline that do this, but out-of-tree drivers have to be fixed and define a proper OF device ID table to have module auto-loading working. - new driver for the SynQuacer I2C controller - major refactoring of the QUP driver - the piix4 driver now uses request_muxed_region which should fix a long standing resource conflict with the sp5100_tco watchdog - a bunch of small core & driver improvements * 'i2c/for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (53 commits) i2c: add support for Socionext SynQuacer I2C controller dt-bindings: i2c: add binding for Socionext SynQuacer I2C i2c: Update i2c_trace_msg static key to modern api i2c: fix parameter of trace_i2c_result i2c: imx: avoid taking clk_prepare mutex in PM callbacks i2c: imx: use clk notifier for rate changes i2c: make i2c_check_addr_validity() static i2c: rcar: fix mask value of prohibited bit dt-bindings: i2c: document R8A77965 bindings i2c: pca-platform: drop gpio from platform data i2c: pca-platform: use device_property_read_u32 i2c: pca-platform: unconditionally use devm_gpiod_get_optional sh: sh7785lcr: add GPIO lookup table for i2c controller reset i2c: qup: reorganization of driver code to remove polling for qup v2 i2c: qup: reorganization of driver code to remove polling for qup v1 i2c: qup: send NACK for last read sub transfers i2c: qup: fix buffer overflow for multiple msg of maximum xfer len i2c: qup: change completion timeout according to transfer length i2c: qup: use the complete transfer length to choose DMA mode i2c: qup: proper error handling for i2c error in BAM mode ...
2018-04-04i2c: add support for Socionext SynQuacer I2C controllerArd Biesheuvel1-0/+10
This is a cleaned up version of the I2C controller driver for the Fujitsu F_I2C IP, which was never supported upstream, and has now been incorporated into the Socionext SynQuacer SoC. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> [wsa: updated MAINTAINERS entry and removed two empty lines] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-26i2c: remove bfin-twi driverArnd Bergmann1-18/+0
The blackfin architecture is getting removed, so the twi driver can also be removed. Acked-by: Aaron Wu <aaron.wu@analog.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-07Merge tag 'metag_remove_2' of ↵Arnd Bergmann1-1/+1
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jhogan/metag into asm-generic Remove metag architecture These patches remove the metag architecture and tightly dependent drivers from the kernel. With the 4.16 kernel the ancient gcc 4.2.4 based metag toolchain we have been using is hitting compiler bugs, so now seems a good time to drop it altogether. * tag 'metag_remove_2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: i2c: img-scb: Drop METAG dependency media: img-ir: Drop METAG dependency watchdog: imgpdc: Drop METAG dependency MAINTAINERS/CREDITS: Drop METAG ARCHITECTURE tty: Remove metag DA TTY and console driver clocksource: Remove metag generic timer driver irqchip: Remove metag irqchip drivers Drop a bunch of metag references docs: Remove remaining references to metag docs: Remove metag docs metag: Remove arch/metag/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-05i2c: img-scb: Drop METAG dependencyJames Hogan1-1/+1
Now that arch/metag/ has been removed, remove the METAG dependency from the IMG SCB I2C device driver. The hardware is also present on MIPS SoCs so the driver still has value. Signed-off-by: James Hogan <jhogan@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Cc: linux-i2c@vger.kernel.org Cc: linux-metag@vger.kernel.org
2018-02-21i2c: i801: Add missing documentation entries for Braswell and Kaby LakeJarkko Nikula1-0/+2
Commits adding PCI IDs for Intel Braswell and Kaby Lake PCH-H lacked the respective Kconfig and Documentation/i2c/busses/i2c-i801 change. Add them now. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-12-03i2c: gpio: add fault injectorWolfram Sang1-0/+8
Add fault injection capabilities to the i2c-gpio driver. When connected to another I2C bus, it can create unusual states which the other I2C bus master driver needs to handle. Only for debugging! Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2017-10-27i2c-cht-wc: Add device-properties for fusb302 integrationHans de Goede1-0/+5
Add device-properties to make the bq24292i charger connected to the bus get its input-current-limit from the fusb302 Type-C port controller which is used on boards with the cht-wc PMIC, as well as regulator_init_data for the 5V boost converter on the bq24292i. Since this means we now hook-up the bq24292i to the fusb302 Type-C port controller add a check for the ACPI device which instantiates the fusb302. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-05i2c: i801: Add support for Intel Cedar ForkJarkko Nikula1-0/+1
Add PCI ID for Intel Cedar Fork PCH. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-09-14i2c: i2c-stm32f7: add driverPierre-Yves MORDRET1-0/+10
This patch adds initial support for the STM32F7 I2C controller. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-09-13i2c: altera: Add Altera I2C Controller driverThor Thayer1-0/+10
Add driver support for the Altera I2C Controller. The I2C controller is soft IP for use in FPGAs. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-09-09Merge branch 'i2c/for-4.14' of ↵Linus Torvalds1-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - new drivers for Spreadtrum I2C, Intel Cherry Trail Whiskey Cove SMBUS - quite some driver updates - cleanups for the i2c-mux subsystem - some subsystem-wide constification - further cleanup of include/linux/i2c * 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits) i2c: sprd: Fix undefined reference errors i2c: nomadik: constify amba_id i2c: versatile: Make i2c_algo_bit_data const i2c: busses: make i2c_adapter_quirks const i2c: busses: make i2c_adapter const i2c: busses: make i2c_algorithm const i2c: Add Spreadtrum I2C controller driver dt-bindings: i2c: Add Spreadtrum I2C controller documentation i2c-cht-wc: make cht_wc_i2c_adap_driver static MAINTAINERS: Add entry for drivers/i2c/busses/i2c-cht-wc.c i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency dt-bindings: i2c: eeprom: Document vendor to be used and deprecated ones i2c: i801: Restore the presence state of P2SB PCI device after reading BAR MAINTAINERS: drop entry for Blackfin I2C and Sonic's email blackfin: merge the two TWI header files i2c: davinci: Preserve return value of devm_clk_get i2c: mediatek: Add i2c compatible for MediaTek MT7622 dt-bindings: i2c: Add MediaTek MT7622 i2c binding dt-bindings: i2c: modify information formats i2c: mux: i2c-arb-gpio-challenge: allow compiling w/o OF support ...
2017-08-31i2c: sprd: Fix undefined reference errorsBaolin Wang1-1/+1
Since the i2c driver of Spreadtrum can not be build as one module, thus it should depend on CONFIG_I2C is build in. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-29i2c: Add Spreadtrum I2C controller driverBaolin Wang1-0/+7
This patch adds the I2C controller driver for Spreadtrum SC9860 platform. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-13i2c-cht-wc: Add Intel Cherry Trail Whiskey Cove SMBUS controller driverHans de Goede1-0/+8
The Intel Cherry Trail Whiskey Cove PMIC does not contain a builtin battery charger, instead boards with this PMIC use an external TI bq24292i charger IC, which is connected to a SMBUS controller built into the PMIC. This commit adds an i2c-bus driver for the PMIC's builtin SMBUS controller. The probe function for this i2c-bus will also register an i2c-client for the TI bq24292i charger after the i2c-bus has been registered. Note that several device-properties are set on the client-device to tell the bq24190 power-supply driver to integrate the Whiskey Cove PMIC and e.g. use the PMIC's BC1.2 detection (through extcon) to determine the maximum input current. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-07-31i2c: allow i2c-versatile for ARM MPS platformsRussell King1-1/+1
Allow i2c-versatile to be enabled for ARM MPS platforms. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-07-04i2c: designware: Let slave adapter support be optionalJarkko Nikula1-1/+0
Only certain system configurations may use the I2C slave mode so let the support be optional. This allow reducing module size if needed: text data bss dec hex filename 10328 1336 16 11680 2da0 drivers/i2c/busses/i2c-designware-core.ko 7222 1136 8 8366 20ae drivers/i2c/busses/i2c-designware-core.ko Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Luis Oliveira <lolivei@synopsys.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-27i2c: designware: add SLAVE mode functionsLuis Oliveira1-1/+13
- Changes in Kconfig to enable I2C_DESIGNWARE_SLAVE support - Slave functions added to core library file - Slave abort sources added to common source file - New driver: i2c-designware-slave added - Changes in the Makefile to compile the I2C_DESIGNWARE_SLAVE module when supported by the architecture. All the SLAVE flow is added but it is not enabled via platform driver. Signed-off-by: Luis Oliveira <lolivei@synopsys.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> [wsa: made a function static and one-lined a message] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-27i2c: zx2967: drop COMPILE_TEST dependencyShawn Guo1-1/+1
0-DAY kernel test reports the following build issue on IA64 architecture with allmodconfig. drivers/i2c/busses/i2c-zx2967.c: In function 'zx2967_i2c_writesb': >> drivers/i2c/busses/i2c-zx2967.c:87:2: error: implicit declaration of function 'writesb' [-Werror=implicit-function-declaration] writesb(i2c->reg_base + reg, data, len); ^~~~~~~ drivers/i2c/busses/i2c-zx2967.c: In function 'zx2967_i2c_readsb': >> drivers/i2c/busses/i2c-zx2967.c:93:2: error: implicit declaration of function 'readsb' [-Werror=implicit-function-declaration] readsb(i2c->reg_base + reg, data, len); ^~~~~~ cc1: some warnings being treated as errors It's caused by that writesb/readsb are unavailable on IA64 architecture. Let's drop COMPILE_TEST dependency to avoid the build issue. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-23i2c: zx2967: add i2c controller driver for ZTE's zx2967 familyBaoyou Xie1-0/+9
This patch adds i2c controller driver for ZTE's zx2967 family. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-23i2c: aspeed: added driver for Aspeed I2CBrendan Higgins1-0/+10
Added initial master support for Aspeed I2C controller. Supports fourteen busses present in AST24XX and AST25XX BMC SoCs by Aspeed. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-06-19i2c: i801: Add support for Intel Cannon LakeSrinivas Pandruvada1-0/+2
Added SMBUS PCI Ids for SMBUS for Cannon Lake PCH. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [jarkko.nikula@linux.intel.com: Add entries to Documentation and Kconfig. Cover Cannon Lake-H too] Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-23i2c: xlp9xx: update for ARCH_THUNDER2Jayachandran C1-1/+1
ARCH_VULCAN arm64 platform (for Broadcom Vulcan ARM64 processors) has been discontinued. Cavium's ThunderX2 CN99XX (ARCH_THUNDER2) will be the next revision of the platform. Update compile dependencies and ACPI ID to reflect this change. There is not need to retain ARCH_VULCAN since the Vulcan processor was never in production and the config option will be removed soon. Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-23i2c: tegra-bpmp: Enable Tegra BPMP I2C adapterJon Hunter1-0/+1
Enable the Tegra BPMP I2C adapter by default if the Tegra BPMP itself is enabled. This adapter is used as the I2C interface for the PMIC on the Tegra186 Jetson-TX2 platform. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-20i2c: Add Tegra BPMP I2C proxy driverShardar Shariff Md1-0/+11
Add Tegra BPMP I2C driver. The BPMP is the boot and power management processor embedded in Tegra SoCs. In newer SoC versions, access to one of the I2C busses goes via the BPMP, requiring a different "proxy" I2C driver that accesses the bus via the real I2C driver embedded in the BPMP firmware. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-02-09i2c: i801: Add support for Intel Gemini LakeMika Westerberg1-0/+1
Intel Gemini Lake has the same SMBus host controller than Intel Broxton. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-01-25i2c: stm32f4: add driverM'boumba Cedric Madianga1-0/+10
This patch adds support for the STM32F4 I2C controller. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-11i2c: cadence: Allow Cadence I2C to be selected for Cadence Xtensa CPUsJan Kotas1-1/+1
This patch allows Cadence I2C controller to be selected in systems using Cadence Xtensa processors. Signed-off-by: Jan Kotas <jank@cadence.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-01i2c: imx-lpi2c: add low power i2c bus driverGao Pan1-0/+10
This patch adds lpi2c bus driver to support new i.MX products which use lpi2c instead of the old imx i2c. The lpi2c can continue operating in stop mode when an appropriate clock is available. It is also designed for low CPU overhead with DMA offloading of FIFO register accesses. Signed-off-by: Gao Pan <pandy.gao@nxp.com> Reviewed-by: Fugang Duan <B38611@freescale.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-12-01i2c: pxa: Add support for the I2C units found in Armada 3700Romain Perier1-1/+1
The Armada 3700 has two I2C controllers that is compliant with the I2C Bus Specificiation 2.1, supports multi-master and different bus speed: Standard mode (up to 100 KHz), Fast mode (up to 400 KHz), High speed mode (up to 3.4 Mhz). This IP block has a lot of similarity with the PXA, except some register offsets and bitfield. This commits adds a basic support for this I2C unit. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-11-24i2c: mlxcpld: add master driver for mellanox systemsVadim Pasternak1-0/+11
Device driver for Mellanox I2C controller logic, implemented in Lattice CPLD device. Device supports: - Master mode - One physical bus - Polling mode The Kconfig currently controlling compilation of this code is: drivers/i2c/busses/Kconfig:config I2C_MLXCPLD Signed-off-by: Michael Shych <michaelsh@mellanox.com> Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-10-25i2c: allow configuration of imx driver for ColdFire architectureGreg Ungerer1-2/+2
The i2c controller used by Freescales iMX processors is the same hardware module used on Freescales ColdFire family of processors. We can use the existing i2c-imx driver on ColdFire family members. Modify the configuration to allow it to be selected when compiling for ColdFire targets. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-10-25i2c: hix5hd2: allow build with ARCH_HISIRuqiang Ju1-4/+4
This driver should be buildable with ARCH_HISI, because some of other HiSilicon SoCs also use it. Signed-off-by: Ruqiang Ju <juruqiang@huawei.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: shmobile: Use ARCH_SHMOBILE instead of SUPERHGeert Uytterhoeven1-1/+1
"i2c-sh_mobile" is used on sh7343, sh7366, sh7722, sh7723, and sh7724 only. As all of the above select ARCH_SHMOBILE, restrict its driver dependencies from SUPERH to ARCH_SHMOBILE. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-26i2c: thunderx: Add SMBUS alert supportJan Glauber1-0/+1
Add SMBUS alert interrupt support. For now only device tree is supported for specifying the alert. In case of ACPI an error is returned. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-26i2c: thunderx: Add i2c driver for ThunderX SOCJan Glauber1-0/+10
The ThunderX SOC uses the same i2c block as the Octeon SOC. The main difference is that on ThunderX the device is a PCI device so device probing is done via PCI, interrupts are MSI-X. The clock rates can be set via device tree or ACPI. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-07-15i2c: brcmstb: Make the driver buildable on BMIPS_GENERICJaedon Shin1-1/+1
The BCM7xxx ARM and MIPS based SoCs share a similar I2C hardware block. Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-07-14i2c: versatile: Allow compile test buildAxel Lin1-1/+1
There is no build dependency for this driver, so enable COMPILE_TEST to get better build coverage. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-07-08i2c: meson: allow build with COMPILE_TESTBen Dooks1-1/+1
This driver should be buildable with COMPILE_TEST so add this to the dependency for it. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-07-06i2c: i801: add support of Host NotifyBenjamin Tissoires1-0/+1
The i801 chip can handle the Host Notify feature since ICH 3 as mentioned in http://www.intel.com/content/dam/doc/datasheet/82801ca-io-controller-hub-3-datasheet.pdf Enable the functionality unconditionally and propagate the alert on each notification. With a T440s and a Synaptics touchpad that implements Host Notify, the payload data is always 0x0000, so I am not sure if the device actually sends the payload or if there is a problem regarding the implementation. Tested-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-06-19i2c: designware: Allow build Baytrail semaphore support when IOSF_MBI=mJarkko Nikula1-1/+3
I believe i2c-designware-baytrail.c doesn't have strict dependency that Intel SoC IOSF Sideband support must be always built-in in order to be able to compile support for Intel Baytrail I2C bus sharing HW semaphore. Redefine build dependencies so that CONFIG_IOSF_MBI=y is required only when CONFIG_I2C_DESIGNWARE_PLATFORM is built-in. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: David Box <david.e.box@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-05-26i2c: xlr: rename ARCH_TANGOX to ARCH_TANGOMarc Gonzalez1-1/+1
The ARCH name was changed during the review process of the mach, and this driver was forgotten to be converted. Fix it now. http://article.gmane.org/gmane.linux.ports.arm.kernel/456331 Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> [wsa: updated commit message slightly] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-05-26i2c: rcar: should depend on HAS_DMAGeert Uytterhoeven1-0/+1
If NO_DMA=y: drivers/built-in.o: In function `rcar_i2c_dma_unmap': i2c-rcar.c:(.text+0x6f06c6): undefined reference to `bad_dma_ops' drivers/built-in.o: In function `rcar_i2c_dma': i2c-rcar.c:(.text+0x6f07e2): undefined reference to `bad_dma_ops' i2c-rcar.c:(.text+0x6f0838): undefined reference to `bad_dma_ops' Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-05-19Merge branch 'i2c/for-4.7' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - Peter Rosin did some major rework on the locking of i2c muxes by seperating parent-locked muxes and mux-locked muxes. This avoids deadlocks/workarounds when the mux itself needs i2c commands for muxing. And as a side-effect, other workarounds in the media layer could be eliminated. Also, Peter stepped up as the i2c mux maintainer and will keep an eye on these changes. - major updates to the octeon driver - add a helper to the core to generate the address+rw_bit octal and make drivers use it - quite a bunch of driver updates * 'i2c/for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (84 commits) i2c: rcar: add DMA support i2c: st: Implement bus clear i2c: only check scl functions when using generic recovery i2c: algo-bit: declare i2c_bit_quirk_no_clk_stretch as static i2c: tegra: disable clock before returning error [media] rtl2832: regmap is aware of lockdep, drop local locking hack [media] rtl2832_sdr: get rid of empty regmap wrappers [media] rtl2832: change the i2c gate to be mux-locked [media] si2168: change the i2c gate to be mux-locked iio: imu: inv_mpu6050: change the i2c gate to be mux-locked i2c: mux: document i2c muxes and elaborate on parent-/mux-locked muxes i2c: mux: relax locking of the top i2c adapter during mux-locked muxing i2c: muxes always lock the parent adapter i2c: allow adapter drivers to override the adapter locking i2c: uniphier: add "\n" at the end of error log i2c: mv64xxx: remove CONFIG_HAVE_CLK conditionals i2c: mv64xxx: use clk_{prepare_enable,disable_unprepare} i2c: mv64xxx: handle probe deferral for the clock i2c: mv64xxx: enable the driver on ARCH_MVEBU i2c: octeon: Add workaround for broken irqs on CN3860 ...
2016-04-27i2c: mv64xxx: enable the driver on ARCH_MVEBUThomas Petazzoni1-1/+1
The new ARM64 Marvell Armada 7K/8K SoC family is using the same I2C controller as the 32-bits Marvell EBU SoCs, so this commit allows mv64xxx to be enabled when ARCH_MVEBU=y. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-04-12i2c: xlp9xx: add support for Broadcom VulcanTanmay Jagdale1-2/+2
The Broadcom Vulcan ARM64 processor uses the same I2C controller present on the Broadcom XLP9xx/5xx MIPS processor family. Updated the Kconfig by adding ARCH_VULCAN option. Signed-off-by: Tanmay Jagdale <tanmay.jagdale@broadcom.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-02-24i2c: riic, sh_mobile, rcar: Use ARCH_RENESASSimon Horman1-3/+3
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-02-12i2c: uniphier: add COMPILE_TEST optionMasahiro Yamada1-2/+2
Add COMPILE_TEST for the compilation test coverage. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-17i2c: emev: select I2C slave supportWolfram Sang1-0/+1
Until we have proper support to make I2C slave support fully optional, select it to prevent build errors on randconfigs. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-30 21:51:18 +0000