summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2018-08-24i2c: don't use any __deprecated handling anymoreSedat Dilek1-1/+0
This can be dropped with commit 771c035372a036f83353eef46dbb829780330234 ("deprecate the '__deprecated' attribute warnings entirely and for good") now in upstream. And we got rid of the last __deprecated use, too. Signed-off-by: Sedat Dilek <sedat.dilek@credativ.de> [wsa: shortened commit message to reflect the current situation] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-31i2c: break out ACPI support into separate fileWolfram Sang1-0/+1
Removes some ifdeffery. Also add the new file to the relevant MAINTAINERS section. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31i2c: break out OF support into separate fileWolfram Sang1-0/+1
Also removes some ifdeffery. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31i2c: break out smbus support into separate fileWolfram Sang1-1/+1
Break out the exported SMBus functions and the emulation layer into a separate file. This also involved splitting up the tracing header into an I2C and an SMBus part. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31i2c: break out slave support into separate fileWolfram Sang1-0/+1
Also removes some ifdeffery. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-31i2c: rename core source file to allow refactorizationWolfram Sang1-1/+3
The I2C core became quite huge and its monolithic structure makes maintenance hard. So, prepare to break out some functionality into separate files by renaming the source file. Note that we keep the resulting object name constant to avoid regressions. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-12-11i2c: slave-eeprom: add eeprom simulator driverWolfram Sang1-0/+1
The first user of the i2c-slave interface is an eeprom simulator. It is a shared memory which can be accessed by the remote master via I2C and locally via sysfs. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-25i2c: move acpi code back into the coreWolfram Sang1-4/+1
Commit 5d98e61d337c ("I2C/ACPI: Add i2c ACPI operation region support") renamed the i2c-core module. This may cause regressions for distributions, so put the ACPI code back into the core. Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Tested-by: Lan Tianyu <tianyu.lan@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-08-19i2c: rework kernel config I2C_ACPILan Tianyu1-1/+1
Commit da3c6647(I2C/ACPI: Clean up I2C ACPI code and Add CONFIG_I2C_ACPI config) adds a new kernel config I2C_ACPI and make I2C core built in when the config is selected. This is wrong because distributions etc generally compile I2C as a module and the commit broken that. This patch is to rename I2C_ACPI to ACPI_I2C_OPREGION. New config only controls ACPI I2C operation region code and depends on I2C=y. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> [wsa: removed unrelated change for Kconfig] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-27I2C/ACPI: Clean up I2C ACPI code and Add CONFIG_I2C_ACPI configLan Tianyu1-1/+1
Clean up ACPI related code in the i2c core and add CONFIG_I2C_ACPI to enable I2C ACPI code. Current there is a race between removing I2C ACPI operation region and ACPI AML code accessing. So make i2c core built-in if CONFIG_I2C_ACPI is set. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-27I2C/ACPI: Add i2c ACPI operation region supportLan Tianyu1-1/+4
ACPI 5.0 spec(5.5.2.4.5) defines GenericSerialBus(i2c, spi, uart) operation region. It allows ACPI aml code able to access such kind of devices to implement some ACPI standard method. ACPI Spec defines some access attribute to associate with i2c protocol. AttribQuick Read/Write Quick Protocol AttribSendReceive Send/Receive Byte Protocol AttribByte Read/Write Byte Protocol AttribWord Read/Write Word Protocol AttribBlock Read/Write Block Protocol AttribBytes Read/Write N-Bytes Protocol AttribProcessCall Process Call Protocol AttribBlockProcessCall Write Block-Read Block Process Call Protocol AttribRawBytes Raw Read/Write N-BytesProtocol AttribRawProcessBytes Raw Process Call Protocol On the Asus T100TA, Bios use GenericSerialBus operation region to access i2c device to get battery info. Sample code From Asus T100TA Scope (_SB.I2C1) { Name (UMPC, ResourceTemplate () { I2cSerialBus (0x0066, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.I2C1", 0x00, ResourceConsumer, , ) }) ... OperationRegion (DVUM, GenericSerialBus, Zero, 0x0100) Field (DVUM, BufferAcc, NoLock, Preserve) { Connection (UMPC), Offset (0x81), AccessAs (BufferAcc, AttribBytes (0x3E)), FGC0, 8 } ... } Device (BATC) { Name (_HID, EisaId ("PNP0C0A")) // _HID: Hardware ID Name (_UID, One) // _UID: Unique ID ... Method (_BST, 0, NotSerialized) // _BST: Battery Status { If (LEqual (AVBL, One)) { Store (FGC0, BFFG) If (LNotEqual (STAT, One)) { ShiftRight (CHST, 0x04, Local0) And (Local0, 0x03, Local0) If (LOr (LEqual (Local0, One), LEqual (Local0, 0x02))) { Store (0x02, Local1) } ... } The i2c operation region is defined under I2C1 scope. _BST method under battery device BATC read battery status from the field "FCG0". The request would be sent to i2c operation region handler. This patch is to add i2c ACPI operation region support. Due to there are only "Byte" and "Bytes" protocol access on the Asus T100TA, other protocols have not been tested. About RawBytes and RawProcessBytes protocol, they needs specific drivers to interpret reference data from AML code according ACPI 5.0 SPEC(5.5.2.4.5.3.9 and 5.5.2.4.5.3.10). So far, not found such case and will add when find real case. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2012-10-28i2c-stub: Move to drivers/i2cJean Delvare1-0/+1
Move the i2c-stub driver to drivers/i2c, to match the Kconfig entry. This is less confusing that way. I also fixed all checkpatch warnings and errors. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Peter Huewe <peterhuewe@gmx.de>
2011-03-20i2c: Deprecate i2c_driver.attach_adapter and .detach_adapterJean Delvare1-0/+1
The last legitimate user of i2c_driver.attach_adapter and .detach_adapter is gone, so we can finally deprecate these callbacks. The last few drivers which still use these will have to be updated to make use of standard I2C device instantiation ways instead. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-24i2c: Change to new flag variablematt mooney1-3/+1
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-11i2c: I2C bus multiplexer driver pca954xMichael Lawnick1-1/+1
I2C driver for PCA954x I2C multiplexer series. Signed-off-by: Michael Lawnick <ml.lawnick@gmx.de> Acked-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-11i2c: Multiplexed I2C bus core supportMichael Lawnick1-0/+1
Add multiplexed bus core support. I2C multiplexer and switches like pca954x get instantiated as new adapters per port. Signed-off-by: Michael Lawnick <ml.lawnick@gmx.de> Acked-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-13tsl2550: Move from i2c/chips to miscJean Delvare1-1/+1
Move the last remaining driver from i2c/chips to misc. Good ridance! Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
2010-03-02i2c: Separate Kconfig option for i2c-smbusJean Delvare1-1/+2
Having a separate Kconfig option for i2c-smbus makes it possible to build that support as a module even when i2c-core itself is built-in. Bus drivers which implement SMBus alert should select this option, so in most cases this option is hidden and the user doesn't have to care about it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Trent Piepho <tpiepho@freescale.com>
2010-03-02i2c: Add SMBus alert supportJean Delvare1-1/+1
SMBus alert support. The SMBus alert protocol allows several SMBus slave devices to share a single interrupt pin on the SMBus master, while still allowing the master to know which slave triggered the interrupt. This is based on preliminary work by David Brownell. The key difference between David's implementation and mine is that his was part of i2c-core, while mine is split into a separate, standalone module named i2c-smbus. The i2c-smbus module is meant to include support for all SMBus extensions to the I2C protocol in the future. The benefit of this approach is a zero cost for I2C bus segments which do not need SMBus alert support. Where David's implementation increased the size of struct i2c_adapter by 7% (40 bytes on i386), mine doesn't touch it. Where David's implementation added over 150 lines of code to i2c-core (+10%), mine doesn't touch it. The only change that touches all the users of the i2c subsystem is a new callback in struct i2c_driver (common to both implementations.) I seem to remember Trent was worried about the footprint of David'd implementation, hopefully mine addresses the issue. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Trent Piepho <tpiepho@freescale.com>
2007-05-01i2c: Add i2c_board_info and i2c_new_device()David Brownell1-0/+1
This provides partial support for new-style I2C driver binding. It builds on "struct i2c_board_info" declarations that identify I2C devices on a given board. This is needed on systems with I2C devices that can't be fully probed and/or autoconfigured, such as many embedded Linux configurations where the way a given I2C device is wired may affect how it must be used. There are two models for declaring such devices: * LATE -- using a public function i2c_new_device(). This lets modules declare I2C devices found *AFTER* a given I2C adapter becomes available. For example, a PCI card could create adapters giving access to utility chips on that card, and this would be used to associate those chips with those adapters. * EARLY -- from arch_initcall() level code, using a non-exported function i2c_register_board_info(). This copies the declarations *BEFORE* such an i2c_adapter becomes available, arranging that i2c_new_device() will be called later when i2c-core registers the relevant i2c_adapter. For example, arch/.../.../board-*.c files would declare the I2C devices along with their platform data, and I2C devices would behave much like PNPACPI devices. (That is, both enumerate from board-specific tables.) To match the exported i2c_new_device(), the previously-private function i2c_unregister_device() is now exported. Pending later patches using these new APIs, this is effectively a NOP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2005-09-05[PATCH] hwmon: hwmon vs i2c, second round (07/11)Jean Delvare1-4/+0
The only part left in i2c-sensor is the VRM/VRD/VID handling code. This is in no way related to i2c, so it doesn't belong there. Move the code to hwmon, where it belongs. Note that not all hardware monitoring drivers do VRM/VRD/VID operations, so less drivers depend on hwmon-vid than there were depending on i2c-sensor. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] hwmon: hwmon vs i2c, second round (05/11)Jean Delvare1-1/+1
The i2c_detect function has no more user, delete it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+15
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!