summaryrefslogtreecommitdiffstats
path: root/drivers/hwtracing
AgeCommit message (Collapse)AuthorFilesLines
2020-06-07Merge tag 'char-misc-5.8-rc1' of ↵Linus Torvalds15-106/+619
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc driver patches for 5.8-rc1 Included in here are: - habanalabs driver updates, loads - mhi bus driver updates - extcon driver updates - clk driver updates (approved by the clock maintainer) - firmware driver updates - fpga driver updates - gnss driver updates - coresight driver updates - interconnect driver updates - parport driver updates (it's still alive!) - nvmem driver updates - soundwire driver updates - visorbus driver updates - w1 driver updates - various misc driver updates In short, loads of different driver subsystem updates along with the drivers as well. All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits) habanalabs: correctly cast u64 to void* habanalabs: initialize variable to default value extcon: arizona: Fix runtime PM imbalance on error extcon: max14577: Add proper dt-compatible strings extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' extcon: remove redundant assignment to variable idx w1: omap-hdq: print dev_err if irq flags are not cleared w1: omap-hdq: fix interrupt handling which did show spurious timeouts w1: omap-hdq: fix return value to be -1 if there is a timeout w1: omap-hdq: cleanup to add missing newline for some dev_dbg /dev/mem: Revoke mappings when a driver claims the region misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages() misc: xilinx-sdfec: cleanup return value in xsdfec_table_write() misc: xilinx-sdfec: improve get_user_pages_fast() error handling nvmem: qfprom: remove incorrect write support habanalabs: handle MMU cache invalidation timeout habanalabs: don't allow hard reset with open processes habanalabs: GAUDI does not support soft-reset habanalabs: add print for soft reset due to event habanalabs: improve MMU cache invalidation code ...
2020-06-01Merge tag 'docs-5.8' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation updates from Jonathan Corbet: "A fair amount of stuff this time around, dominated by yet another massive set from Mauro toward the completion of the RST conversion. I *really* hope we are getting close to the end of this. Meanwhile, those patches reach pretty far afield to update document references around the tree; there should be no actual code changes there. There will be, alas, more of the usual trivial merge conflicts. Beyond that we have more translations, improvements to the sphinx scripting, a number of additions to the sysctl documentation, and lots of fixes" * tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits) Documentation: fixes to the maintainer-entry-profile template zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst tracing: Fix events.rst section numbering docs: acpi: fix old http link and improve document format docs: filesystems: add info about efivars content Documentation: LSM: Correct the basic LSM description mailmap: change email for Ricardo Ribalda docs: sysctl/kernel: document unaligned controls Documentation: admin-guide: update bug-hunting.rst docs: sysctl/kernel: document ngroups_max nvdimm: fixes to maintainter-entry-profile Documentation/features: Correct RISC-V kprobes support entry Documentation/features: Refresh the arch support status files Revert "docs: sysctl/kernel: document ngroups_max" docs: move locking-specific documents to locking/ docs: move digsig docs to the security book docs: move the kref doc into the core-api book docs: add IRQ documentation at the core-api book docs: debugging-via-ohci1394.txt: add it to the core-api book docs: fix references for ipmi.rst file ...
2020-05-19coresight: cti: Add CPU idle pm notifer to CTI devicesMike Leach1-0/+69
Adds a notify callback for CPU PM events to the CTI driver - for CPU bound CTI devices. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-24-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: cti: Add CPU Hotplug handling to CTI driverMike Leach1-0/+92
Adds registration of CPU start and stop functions to CPU hotplug mechanisms - for any CPU bound CTI. Sets CTI powered flag according to state. Will enable CTI on CPU start if there are existing enable requests. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-23-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: etm4x: Fix use-after-free of per-cpu etm drvdataSuzuki K Poulose1-0/+1
etm probe could be deferred due to the dependency in the trace path chain and may be retried. We need to clear the per-cpu etmdrvdata entry for the etm in case of a failure to avoid use-after-free cases as reported below: KASAN use-after-free bug in etm4_cpu_pm_notify(): [ 8.574566] coresight etm0: CPU0: ETM v4.2 initialized [ 8.581920] BUG: KASAN: use-after-free in etm4_cpu_pm_notify+0x580/0x2024 [ 8.581925] Read of size 8 at addr ffffff813304f8c8 by task swapper/3/0 [ 8.581927] [ 8.581934] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G S W 5.4.28 #314 [ 8.587775] coresight etm1: CPU1: ETM v4.2 initialized [ 8.594195] Call trace: [ 8.594205] dump_backtrace+0x0/0x188 [ 8.594209] show_stack+0x20/0x2c [ 8.594216] dump_stack+0xdc/0x144 [ 8.594227] print_address_description+0x3c/0x494 [ 8.594232] __kasan_report+0x144/0x168 [ 8.601598] coresight etm2: CPU2: ETM v4.2 initialized [ 8.602563] kasan_report+0x10/0x18 [ 8.602568] check_memory_region+0x1a4/0x1b4 [ 8.602572] __kasan_check_read+0x18/0x24 [ 8.602577] etm4_cpu_pm_notify+0x580/0x2024 [ 8.665945] notifier_call_chain+0x5c/0x90 [ 8.670166] __atomic_notifier_call_chain+0x90/0xf8 [ 8.675182] cpu_pm_notify+0x40/0x6c [ 8.678858] cpu_pm_enter+0x38/0x80 [ 8.682451] psci_enter_idle_state+0x34/0x70 [ 8.686844] cpuidle_enter_state+0xb8/0x20c [ 8.691143] cpuidle_enter+0x38/0x4c [ 8.694820] call_cpuidle+0x3c/0x68 [ 8.698408] do_idle+0x1a0/0x280 [ 8.701729] cpu_startup_entry+0x24/0x28 [ 8.705768] secondary_start_kernel+0x15c/0x170 [ 8.710423] [ 8.711972] Allocated by task 242: [ 8.715473] __kasan_kmalloc+0xf0/0x1ac [ 8.719426] kasan_slab_alloc+0x14/0x1c [ 8.723375] __kmalloc_track_caller+0x23c/0x388 [ 8.728040] devm_kmalloc+0x38/0x94 [ 8.731632] etm4_probe+0x48/0x3c8 [ 8.735140] amba_probe+0xbc/0x158 [ 8.738645] really_probe+0x144/0x408 [ 8.742412] driver_probe_device+0x70/0x140 [ 8.746716] __device_attach_driver+0x9c/0x110 [ 8.751287] bus_for_each_drv+0x90/0xd8 [ 8.755236] __device_attach+0xb4/0x164 [ 8.759188] device_initial_probe+0x20/0x2c [ 8.763490] bus_probe_device+0x34/0x94 [ 8.767436] device_add+0x34c/0x3e0 [ 8.771029] amba_device_try_add+0x68/0x440 [ 8.775332] amba_deferred_retry_func+0x48/0xc8 [ 8.779997] process_one_work+0x344/0x648 [ 8.784127] worker_thread+0x2ac/0x47c [ 8.787987] kthread+0x128/0x138 [ 8.791313] ret_from_fork+0x10/0x18 [ 8.794993] [ 8.796532] Freed by task 242: [ 8.799684] __kasan_slab_free+0x15c/0x22c [ 8.803897] kasan_slab_free+0x10/0x1c [ 8.807761] kfree+0x25c/0x4bc [ 8.810913] release_nodes+0x240/0x2b0 [ 8.814767] devres_release_all+0x3c/0x54 [ 8.818887] really_probe+0x178/0x408 [ 8.822661] driver_probe_device+0x70/0x140 [ 8.826963] __device_attach_driver+0x9c/0x110 [ 8.831539] bus_for_each_drv+0x90/0xd8 [ 8.835487] __device_attach+0xb4/0x164 [ 8.839431] device_initial_probe+0x20/0x2c [ 8.843732] bus_probe_device+0x34/0x94 [ 8.847678] device_add+0x34c/0x3e0 [ 8.851274] amba_device_try_add+0x68/0x440 [ 8.855576] amba_deferred_retry_func+0x48/0xc8 [ 8.860240] process_one_work+0x344/0x648 [ 8.864366] worker_thread+0x2ac/0x47c [ 8.868228] kthread+0x128/0x138 [ 8.871557] ret_from_fork+0x10/0x18 [ 8.875231] [ 8.876782] The buggy address belongs to the object at ffffff813304f800 [ 8.876782] which belongs to the cache kmalloc-1k of size 1024 [ 8.889632] The buggy address is located 200 bytes inside of [ 8.889632] 1024-byte region [ffffff813304f800, ffffff813304fc00) [ 8.901761] The buggy address belongs to the page: [ 8.906695] page:ffffffff04ac1200 refcount:1 mapcount:0 mapping:ffffff8146c03800 index:0x0 compound_mapcount: 0 [ 8.917047] flags: 0x4000000000010200(slab|head) [ 8.921799] raw: 4000000000010200 dead000000000100 dead000000000122 ffffff8146c03800 [ 8.929753] raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 [ 8.937703] page dumped because: kasan: bad access detected [ 8.943433] [ 8.944974] Memory state around the buggy address: [ 8.949903] ffffff813304f780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 8.957320] ffffff813304f800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.964742] >ffffff813304f880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.972157] ^ [ 8.977886] ffffff813304f900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.985298] ffffff813304f980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.992713] ================================================================== Fixes: f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states") Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-22-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Avoid casting void pointersStephen Boyd1-3/+6
We don't need to cast void pointers, such as the amba_id data. Assign to a local variable to make the code prettier and also return NULL instead of 0 to make sparse happy. Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Reviewed-by: Joe Perches <joe@perches.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-21-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Include required headers in C filesStephen Boyd4-2/+33
We should include headers that C files use in the C files that use them and avoid relying on implicit includes as much as possible. This helps avoid compiler errors in the future about missing declarations when header files change includes in the future. Cc: Douglas Anderson <dianders@chromium.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-20-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Initialize arg in sparse friendly wayStephen Boyd2-2/+2
Sparse gets annoyed when this initializer is 0 but the first struct member is a pointer. Just use { } to initialize instead so that sparse is quiet. Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-19-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Don't initialize variables unnecessarilyStephen Boyd1-4/+4
These variables are assigned again before they're used. Leave them unassigned at first so that the compiler can detect problems in the future with use before initialization. Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-18-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Mark some functions staticStephen Boyd4-6/+5
These functions aren't used outside the file they're in. Mark them static to indicate as such and silence tools like sparse. Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> [Dropped changes in coresight-cti.c and coresight-etb10.c] Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-17-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: etm4x: Add support for Neoverse N1 ETMAnurag Koul1-0/+1
Add PID for Arm Neoverse N1 ETM to the list of supported/known ETMs. Signed-off-by: Anurag Koul <anurag.koul@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-16-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: etmv4: Update default filter and initialisationMike Leach2-18/+7
Differing default states set on driver init / perf init and as a result of a sysfs reset. The ETMv4 can be programmed to trace the entire instruction address range without the need to use address comparator filter resources. (Described in the ETMv4.x technical reference manual) sysfs reset was using this method, perf and default driver init were setup with an address range comparator for the entire address range. The perf / driver init has been altered to use the method without needing any comparator address hardware. Minor adjustment to the vinst_ctrl register initialisation to ensure correct zero initialisation. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-15-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: tmc: Fix TMC mode read in tmc_read_prepare_etb()Sai Prakash Ranjan1-8/+8
On some QCOM platforms like SC7180, SDM845 and SM8150, reading TMC mode register without proper coresight power management can lead to async exceptions like the one in the call trace below in tmc_read_prepare_etb(). This can happen if the user tries to read the TMC etf data via device node without setting up source and the sink first. Fix this by having a check for coresight sysfs mode before reading TMC mode management register. Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 7 PID: 2605 Comm: hexdump Tainted: G S 5.4.30 #122 Call trace: dump_backtrace+0x0/0x188 show_stack+0x20/0x2c dump_stack+0xdc/0x144 panic+0x168/0x36c panic+0x0/0x36c arm64_serror_panic+0x78/0x84 do_serror+0x130/0x138 el1_error+0x84/0xf8 tmc_read_prepare_etb+0x88/0xb8 tmc_open+0x40/0xd8 misc_open+0x120/0x158 chrdev_open+0xb8/0x1a4 do_dentry_open+0x268/0x3a0 vfs_open+0x34/0x40 path_openat+0x39c/0xdf4 do_filp_open+0x90/0x10c do_sys_open+0x150/0x3e8 __arm64_compat_sys_openat+0x28/0x34 el0_svc_common+0xa8/0x160 el0_svc_compat_handler+0x2c/0x38 el0_svc_compat+0x8/0x10 Fixes: 4525412a5046 ("coresight: tmc: making prepare/unprepare functions generic") Reported-by: Stephen Boyd <swboyd@chromium.org> Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-14-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Fix support for sparsely populated portsSuzuki K Poulose2-26/+66
On some systems the firmware may not describe all the ports connected to a component (e.g, for security reasons). This could be especially problematic for "funnels" where we could end up in modifying memory beyond the allocated space for refcounts. e.g, for a funnel with input ports listed 0, 3, 5, nr_inport = 3. However the we could access refcnts[5] while checking for references, like : [ 526.110401] ================================================================== [ 526.117988] BUG: KASAN: slab-out-of-bounds in funnel_enable+0x54/0x1b0 [ 526.124706] Read of size 4 at addr ffffff8135f9549c by task bash/1114 [ 526.131324] [ 526.132886] CPU: 3 PID: 1114 Comm: bash Tainted: G S 5.4.25 #232 [ 526.140397] Hardware name: Qualcomm Technologies, Inc. SC7180 IDP (DT) [ 526.147113] Call trace: [ 526.149653] dump_backtrace+0x0/0x188 [ 526.153431] show_stack+0x20/0x2c [ 526.156852] dump_stack+0xdc/0x144 [ 526.160370] print_address_description+0x3c/0x494 [ 526.165211] __kasan_report+0x144/0x168 [ 526.169170] kasan_report+0x10/0x18 [ 526.172769] check_memory_region+0x1a4/0x1b4 [ 526.177164] __kasan_check_read+0x18/0x24 [ 526.181292] funnel_enable+0x54/0x1b0 [ 526.185072] coresight_enable_path+0x104/0x198 [ 526.189649] coresight_enable+0x118/0x26c ... [ 526.237782] Allocated by task 280: [ 526.241298] __kasan_kmalloc+0xf0/0x1ac [ 526.245249] kasan_kmalloc+0xc/0x14 [ 526.248849] __kmalloc+0x28c/0x3b4 [ 526.252361] coresight_register+0x88/0x250 [ 526.256587] funnel_probe+0x15c/0x228 [ 526.260365] dynamic_funnel_probe+0x20/0x2c [ 526.264679] amba_probe+0xbc/0x158 [ 526.268193] really_probe+0x144/0x408 [ 526.271970] driver_probe_device+0x70/0x140 ... [ 526.316810] [ 526.318364] Freed by task 0: [ 526.321344] (stack is not available) [ 526.325024] [ 526.326580] The buggy address belongs to the object at ffffff8135f95480 [ 526.326580] which belongs to the cache kmalloc-128 of size 128 [ 526.339439] The buggy address is located 28 bytes inside of [ 526.339439] 128-byte region [ffffff8135f95480, ffffff8135f95500) [ 526.351399] The buggy address belongs to the page: [ 526.356342] page:ffffffff04b7e500 refcount:1 mapcount:0 mapping:ffffff814b00c380 index:0x0 compound_mapcount: 0 [ 526.366711] flags: 0x4000000000010200(slab|head) [ 526.371475] raw: 4000000000010200 ffffffff05034008 ffffffff0501eb08 ffffff814b00c380 [ 526.379435] raw: 0000000000000000 0000000000190019 00000001ffffffff 0000000000000000 [ 526.387393] page dumped because: kasan: bad access detected [ 526.393128] [ 526.394681] Memory state around the buggy address: [ 526.399619] ffffff8135f95380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 526.407046] ffffff8135f95400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 526.414473] >ffffff8135f95480: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 526.421900] ^ [ 526.426029] ffffff8135f95500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 526.433456] ffffff8135f95580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 526.440883] ================================================================== To keep the code simple, we now track the maximum number of possible input/output connections to/from this component @ nr_inport and nr_outport in platform_data, respectively. Thus the output connections could be sparse and code is adjusted to skip the unspecified connections. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-13-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: etb10: Make coresight_etb_groups staticJason Yan1-1/+1
Fix the following sparse warning: drivers/hwtracing/coresight/coresight-etb10.c:720:30: warning: symbol 'coresight_etb_groups' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-12-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: cti: Make some symbols staticJason Yan1-3/+3
Fix the following sparse warning: drivers/hwtracing/coresight/coresight-cti.c:22:1: warning: symbol 'ect_net' was not declared. Should it be static? drivers/hwtracing/coresight/coresight-cti.c:625:32: warning: symbol 'cti_ops_ect' was not declared. Should it be static? drivers/hwtracing/coresight/coresight-cti.c:630:28: warning: symbol 'cti_ops' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-11-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: etm4x: Replace ETM PIDs with UCI IDs for Kryo385Sai Prakash Ranjan1-2/+2
Replace the AMBA ETM PIDs with UCI IDs to avoid future conflicts when adding the CTI support for QCOM Kryo385 CPU cores. Fixes: 17b4add0d4e0 ("coresight: etm4x: Add ETM PIDs for SDM845 and MSM8996") Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-10-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: etm4x: Add support for Qualcomm SC7180 SoCSai Prakash Ranjan1-0/+2
Add ETM UCI IDs for Qualcomm SC7180 SoC. It has 2 big CPU cores based on Cortex-A76 and 6 LITTLE CPU cores based on Cortex-A55. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-9-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: cti: Add in sysfs links to other coresight devicesMike Leach1-4/+48
Adds in sysfs links for connections where the connected device is another coresight device. This allows examination of the coresight topology. Non-coresight connections remain just as a reference name. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-6-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Expose device connections via sysfsSuzuki K Poulose3-12/+119
Coresight device connections are a bit complicated and is not exposed currently to the user. One has to look at the platform descriptions (DT bindings or ACPI bindings) to make an understanding. Given the new naming scheme, it will be helpful to have this information to choose the appropriate devices for tracing. This patch exposes the device connections via links in the sysfs directories. e.g, for a connection devA[OutputPort_X] -> devB[InputPort_Y] is represented as two symlinks: /sys/bus/coresight/.../devA/out:X -> /sys/bus/coresight/.../devB /sys/bus/coresight/.../devB/in:Y -> /sys/bus/coresight/.../devA Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> [Revised to use the generic sysfs links functions & link structures. Provides a connections sysfs group in each device to hold the links.] Co-developed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-5-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Add generic sysfs link creation functionsMike Leach3-1/+130
To allow the connections between coresight components to be represented in sysfs, generic methods for creating sysfs links between two coresight devices are added. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-4-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Add return value for fixup connectionsSuzuki K Poulose1-10/+14
Handle failures in fixing up connections for a newly registered device. This will be useful to handle cases where we fail to expose the links via sysfs for the connections. Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-3-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Pass coresight_device for coresight_release_platform_dataSuzuki K Poulose3-5/+7
As we prepare to expose the links between the devices in sysfs, pass the coresight_device instance to the coresight_release_platform_data in order to free up the connections when the device is removed. No functional changes as such in this patch. Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15coresight: cti: remove incorrect NULL return checkCalvin Johnson1-2/+2
fwnode_find_reference() doesn't return NULL and hence that check should be avoided. Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200507053547.13707-1-calvin.johnson@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-20docs: fix broken references to text filesMauro Carvalho Chehab1-1/+1
Several references got broken due to txt to ReST conversion. Several of them can be automatically fixed with: scripts/documentation-file-ref-check --fix Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # hwtracing/coresight/Kconfig Reviewed-by: Paul E. McKenney <paulmck@kernel.org> # memory-barrier.txt Acked-by: Alex Shi <alex.shi@linux.alibaba.com> # translations/zh_CN Acked-by: Federico Vaga <federico.vaga@vaga.pv.it> # translations/it_IT Acked-by: Marc Zyngier <maz@kernel.org> # kvm/arm64 Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/6f919ddb83a33b5f2a63b6b5f0575737bb2b36aa.1586881715.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-03-24intel_th: msu: Make stopping the trace optionalAlexander Shishkin1-1/+37
Some use cases prefer to keep collecting the trace data into the last available window while the other windows are being offloaded instead of stopping the trace. In this scenario, the window switch happens automatically when the next window becomes available again. Add an option to allow this and a sysfs attribute to enable it. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200319085152.52183-1-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-23Merge 5.6-rc7 into char-misc-nextGreg Kroah-Hartman3-9/+15
We need the char/misc driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21coresight: cti: Add connection information to sysfsMike Leach3-3/+346
Dynamically adds sysfs attributes for all connections defined in the CTI. Each connection has a triggers<N> sub-directory with name, in_signals, in_types, out_signals and out_types as read-only parameters in the directory. in_ or out_ parameters may be omitted if there are no in or out signals for the connection. Additionally each device has a nr_cons in the connections sub-directory. This allows clients to explore the connection and trigger signal details without needing to refer to device tree or specification of the device. Standardised type information is provided for certain common functions - e.g. snk_full for a trigger from a sink indicating full. Otherwise type defaults to genio. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200320165303.13681-10-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21coresight: cti: Enable CTI associated with devicesMike Leach4-5/+204
The CoreSight subsystem enables a path of devices from source to sink. Any CTI devices associated with the path devices must be enabled at the same time. This patch adds an associated coresight_device element to the main coresight device structure, and uses this to create associations between the CTI and other devices based on the device tree data. The associated device element is used to enable CTI in conjunction with the path elements. CTI devices are reference counted so where a single CTI is associated with multiple elements on the path, it will be enabled on the first associated device enable, and disabled with the last associated device disable. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200320165303.13681-9-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21coresight: cti: Add device tree support for custom CTIMike Leach2-4/+241
Adds support for CTIs whose connections are implementation defined at hardware design time, and not constrained by v8 architecture. These CTIs have no standard connection setup, all the settings have to be defined in the device tree files. The patch creates a set of connections and trigger signals based on the information provided. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200320165303.13681-8-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21coresight: cti: Add device tree support for v8 arch CTIMike Leach4-9/+230
The v8 architecture defines the relationship between a PE, its optional ETM and a CTI. Unlike non-architectural CTIs which are implementation defined, this has a fixed set of connections which can therefore be represented as a simple tag in the device tree. This patch defines the tags needed to create an entry for this PE/ETM/CTI relationship, and provides functionality to implement the connection model in the CTI driver. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200320165303.13681-7-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21coresight: cti: Add sysfs trigger / channel programming APIMike Leach3-0/+551
Adds a user API to allow programming of CTI by trigger ID and channel number. This will take the channel and trigger ID supplied by the user and program the appropriate register values. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200320165303.13681-5-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21coresight: cti: Add sysfs access to program function registersMike Leach4-0/+397
Adds in sysfs programming support for the CTI function register sets. Allows direct manipulation of channel / trigger association registers. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200320165303.13681-4-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21coresight: cti: Add sysfs coresight mgmt register accessMike Leach2-0/+54
Adds sysfs access to the coresight management registers. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200320165303.13681-3-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21coresight: cti: Initial CoreSight CTI DriverMike Leach7-0/+786
This introduces a baseline CTI driver and associated configuration files. Uses the platform agnostic naming standard for CoreSight devices, along with a generic platform probing method that currently supports device tree descriptions, but allows for the ACPI bindings to be added once these have been defined for the CTI devices. Driver will probe for the device on the AMBA bus, and load the CTI driver on CoreSight ID match to CTI IDs in tables. Initial sysfs support for enable / disable provided. Default CTI interconnection data is generated based on hardware register signal counts, with no additional connection information. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200320165303.13681-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18intel_th: pci: Add Elkhart Lake CPU supportAlexander Shishkin1-0/+5
This adds support for the Trace Hub in Elkhart Lake CPU. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200317062215.15598-7-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18intel_th: Fix user-visible error codesAlexander Shishkin1-3/+3
There are a few places in the driver that end up returning ENOTSUPP to the user, replace those with EINVAL. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: ba82664c134ef ("intel_th: Add Memory Storage Unit driver") Cc: stable@vger.kernel.org # v4.4+ Link: https://lore.kernel.org/r/20200317062215.15598-6-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18intel_th: msu: Fix the unexpected state warningAlexander Shishkin1-3/+4
The unexpected state warning should only warn on illegal state transitions. Fix that. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: 615c164da0eb4 ("intel_th: msu: Introduce buffer interface") Cc: stable@vger.kernel.org # v5.4+ Link: https://lore.kernel.org/r/20200317062215.15598-5-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18stm class: sys-t: Fix the use of time_after()Alexander Shishkin1-3/+3
The operands of time_after() are in a wrong order in both instances in the sys-t driver. Fix that. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: 39f10239df75 ("stm class: p_sys-t: Add support for CLOCKSYNC packets") Fixes: d69d5e83110f ("stm class: Add MIPI SyS-T protocol support") Cc: stable@vger.kernel.org # v4.20+ Link: https://lore.kernel.org/r/20200317062215.15598-3-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18intel_th: Disallow multi mode on devices where it's brokenAlexander Shishkin3-4/+17
Some versions of Intel TH have an issue that prevents the multi mode of MSU from working correctly, resulting in no trace data and potentially stuck MSU pipeline. Disable multi mode on such devices. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200317062215.15598-2-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14coresight: etm4x: Fix unused function warningArnd Bergmann1-7/+6
Some of the newly added code in the etm4x driver is inside of an #ifdef, and some other code is outside of it, leading to a harmless warning when CONFIG_CPU_PM is disabled: drivers/hwtracing/coresight/coresight-etm4x.c:68:13: error: 'etm4_os_lock' defined but not used [-Werror=unused-function] static void etm4_os_lock(struct etmv4_drvdata *drvdata) ^~~~~~~~~~~~ To avoid the warning and simplify the the #ifdef checks, use IS_ENABLED() instead, so the compiler can drop the unused functions without complaining. Fixes: f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states") Signed-off-by: Arnd Bergmann <arnd@arndb.de> [Fixed capital 'f' in title] Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191213223107.1484-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17intel_th: msu: Fix window switching without windowsAlexander Shishkin1-5/+9
Commit 6cac7866c2741 ("intel_th: msu: Add a sysfs attribute to trigger window switch") adds a NULL pointer dereference in the case when there are no windows allocated: > BUG: kernel NULL pointer dereference, address: 0000000000000000 > #PF: supervisor read access in kernel mode > #PF: error_code(0x0000) - not-present page > PGD 0 P4D 0 > Oops: 0000 1 SMP > CPU: 5 PID: 1110 Comm: bash Not tainted 5.5.0-rc1+ #1 > RIP: 0010:msc_win_switch+0xa/0x80 [intel_th_msu] > Call Trace: > ? win_switch_store+0x9b/0xc0 [intel_th_msu] > dev_attr_store+0x17/0x30 > sysfs_kf_write+0x3e/0x50 > kernfs_fop_write+0xda/0x1b0 > __vfs_write+0x1b/0x40 > vfs_write+0xb9/0x1a0 > ksys_write+0x67/0xe0 > __x64_sys_write+0x1a/0x20 > do_syscall_64+0x57/0x1d0 > entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix that by disallowing window switching with multiwindow buffers without windows. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 6cac7866c274 ("intel_th: msu: Add a sysfs attribute to trigger window switch") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: Ammy Yi <ammy.yi@intel.com> Tested-by: Ammy Yi <ammy.yi@intel.com> Cc: stable@vger.kernel.org # v5.2+ Link: https://lore.kernel.org/r/20191217115527.74383-5-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17intel_th: Fix freeing IRQsAlexander Shishkin2-3/+6
Commit aac8da65174a ("intel_th: msu: Start handling IRQs") implicitly relies on the use of devm_request_irq() to subsequently free the irqs on device removal, but in case of the pci_free_irq_vectors() API, the handlers need to be freed before it is called. Therefore, at the moment the driver's remove path trips a BUG_ON(irq_has_action()): > kernel BUG at drivers/pci/msi.c:375! > invalid opcode: 0000 1 SMP > CPU: 2 PID: 818 Comm: rmmod Not tainted 5.5.0-rc1+ #1 > RIP: 0010:free_msi_irqs+0x67/0x1c0 > pci_disable_msi+0x116/0x150 > pci_free_irq_vectors+0x1b/0x20 > intel_th_pci_remove+0x22/0x30 [intel_th_pci] > pci_device_remove+0x3e/0xb0 > device_release_driver_internal+0xf0/0x1c0 > driver_detach+0x4c/0x8f > bus_remove_driver+0x5c/0xd0 > driver_unregister+0x31/0x50 > pci_unregister_driver+0x40/0x90 > intel_th_pci_driver_exit+0x10/0xad6 [intel_th_pci] > __x64_sys_delete_module+0x147/0x290 > ? exit_to_usermode_loop+0xd7/0x120 > do_syscall_64+0x57/0x1b0 > entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by explicitly freeing irqs before freeing the vectors. We keep using the devm_* variants because they are still useful in early error paths. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: aac8da65174a ("intel_th: msu: Start handling IRQs") Reported-by: Ammy Yi <ammy.yi@intel.com> Tested-by: Ammy Yi <ammy.yi@intel.com> Cc: stable@vger.kernel.org # v5.2+ Link: https://lore.kernel.org/r/20191217115527.74383-4-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17intel_th: pci: Add Elkhart Lake SOC supportAlexander Shishkin1-0/+5
This adds support for Intel Trace Hub in Elkhart Lake. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191217115527.74383-3-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17intel_th: pci: Add Comet Lake PCH-V supportAlexander Shishkin1-0/+5
This adds Intel(R) Trace Hub PCI ID for Comet Lake PCH-V. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191217115527.74383-2-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds1-11/+1
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-20intel_th: pci: Add Tiger Lake CPU supportAlexander Shishkin1-0/+5
This adds support for the Trace Hub in Tiger Lake CPU. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191120130806.44028-4-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-20intel_th: pci: Add Ice Lake CPU supportAlexander Shishkin1-0/+5
This adds support for the Trace Hub in Ice Lake CPU. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191120130806.44028-3-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-20intel_th: Fix a double put_device() in error pathAlexander Shishkin1-6/+2
Commit a753bfcfdb1f ("intel_th: Make the switch allocate its subdevices") factored out intel_th_subdevice_alloc() from intel_th_populate(), but got the error path wrong, resulting in two instances of a double put_device() on a freshly initialized, but not 'added' device. Fix this by only doing one put_device() in the error path. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: a753bfcfdb1f ("intel_th: Make the switch allocate its subdevices") Reported-by: Wen Yang <wenyang@linux.alibaba.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org # v4.14+ Link: https://lore.kernel.org/r/20191120130806.44028-2-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-19coresight: replicator: Fix missing spin_lock_init()Wei Yongjun1-0/+1
The driver allocates the spinlock but not initialize it. Use spin_lock_init() on it to initialize it correctly. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Tested-by: Yabin Cui <yabinc@google.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191118185207.30441-3-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-12 09:33:32 +0000