summaryrefslogtreecommitdiffstats
path: root/drivers/hwtracing/coresight
AgeCommit message (Collapse)AuthorFilesLines
2020-06-07Merge tag 'char-misc-5.8-rc1' of ↵Linus Torvalds15-106/+619
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc driver patches for 5.8-rc1 Included in here are: - habanalabs driver updates, loads - mhi bus driver updates - extcon driver updates - clk driver updates (approved by the clock maintainer) - firmware driver updates - fpga driver updates - gnss driver updates - coresight driver updates - interconnect driver updates - parport driver updates (it's still alive!) - nvmem driver updates - soundwire driver updates - visorbus driver updates - w1 driver updates - various misc driver updates In short, loads of different driver subsystem updates along with the drivers as well. All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits) habanalabs: correctly cast u64 to void* habanalabs: initialize variable to default value extcon: arizona: Fix runtime PM imbalance on error extcon: max14577: Add proper dt-compatible strings extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' extcon: remove redundant assignment to variable idx w1: omap-hdq: print dev_err if irq flags are not cleared w1: omap-hdq: fix interrupt handling which did show spurious timeouts w1: omap-hdq: fix return value to be -1 if there is a timeout w1: omap-hdq: cleanup to add missing newline for some dev_dbg /dev/mem: Revoke mappings when a driver claims the region misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages() misc: xilinx-sdfec: cleanup return value in xsdfec_table_write() misc: xilinx-sdfec: improve get_user_pages_fast() error handling nvmem: qfprom: remove incorrect write support habanalabs: handle MMU cache invalidation timeout habanalabs: don't allow hard reset with open processes habanalabs: GAUDI does not support soft-reset habanalabs: add print for soft reset due to event habanalabs: improve MMU cache invalidation code ...
2020-06-01Merge tag 'docs-5.8' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation updates from Jonathan Corbet: "A fair amount of stuff this time around, dominated by yet another massive set from Mauro toward the completion of the RST conversion. I *really* hope we are getting close to the end of this. Meanwhile, those patches reach pretty far afield to update document references around the tree; there should be no actual code changes there. There will be, alas, more of the usual trivial merge conflicts. Beyond that we have more translations, improvements to the sphinx scripting, a number of additions to the sysctl documentation, and lots of fixes" * tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits) Documentation: fixes to the maintainer-entry-profile template zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst tracing: Fix events.rst section numbering docs: acpi: fix old http link and improve document format docs: filesystems: add info about efivars content Documentation: LSM: Correct the basic LSM description mailmap: change email for Ricardo Ribalda docs: sysctl/kernel: document unaligned controls Documentation: admin-guide: update bug-hunting.rst docs: sysctl/kernel: document ngroups_max nvdimm: fixes to maintainter-entry-profile Documentation/features: Correct RISC-V kprobes support entry Documentation/features: Refresh the arch support status files Revert "docs: sysctl/kernel: document ngroups_max" docs: move locking-specific documents to locking/ docs: move digsig docs to the security book docs: move the kref doc into the core-api book docs: add IRQ documentation at the core-api book docs: debugging-via-ohci1394.txt: add it to the core-api book docs: fix references for ipmi.rst file ...
2020-05-19coresight: cti: Add CPU idle pm notifer to CTI devicesMike Leach1-0/+69
Adds a notify callback for CPU PM events to the CTI driver - for CPU bound CTI devices. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-24-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: cti: Add CPU Hotplug handling to CTI driverMike Leach1-0/+92
Adds registration of CPU start and stop functions to CPU hotplug mechanisms - for any CPU bound CTI. Sets CTI powered flag according to state. Will enable CTI on CPU start if there are existing enable requests. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-23-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: etm4x: Fix use-after-free of per-cpu etm drvdataSuzuki K Poulose1-0/+1
etm probe could be deferred due to the dependency in the trace path chain and may be retried. We need to clear the per-cpu etmdrvdata entry for the etm in case of a failure to avoid use-after-free cases as reported below: KASAN use-after-free bug in etm4_cpu_pm_notify(): [ 8.574566] coresight etm0: CPU0: ETM v4.2 initialized [ 8.581920] BUG: KASAN: use-after-free in etm4_cpu_pm_notify+0x580/0x2024 [ 8.581925] Read of size 8 at addr ffffff813304f8c8 by task swapper/3/0 [ 8.581927] [ 8.581934] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G S W 5.4.28 #314 [ 8.587775] coresight etm1: CPU1: ETM v4.2 initialized [ 8.594195] Call trace: [ 8.594205] dump_backtrace+0x0/0x188 [ 8.594209] show_stack+0x20/0x2c [ 8.594216] dump_stack+0xdc/0x144 [ 8.594227] print_address_description+0x3c/0x494 [ 8.594232] __kasan_report+0x144/0x168 [ 8.601598] coresight etm2: CPU2: ETM v4.2 initialized [ 8.602563] kasan_report+0x10/0x18 [ 8.602568] check_memory_region+0x1a4/0x1b4 [ 8.602572] __kasan_check_read+0x18/0x24 [ 8.602577] etm4_cpu_pm_notify+0x580/0x2024 [ 8.665945] notifier_call_chain+0x5c/0x90 [ 8.670166] __atomic_notifier_call_chain+0x90/0xf8 [ 8.675182] cpu_pm_notify+0x40/0x6c [ 8.678858] cpu_pm_enter+0x38/0x80 [ 8.682451] psci_enter_idle_state+0x34/0x70 [ 8.686844] cpuidle_enter_state+0xb8/0x20c [ 8.691143] cpuidle_enter+0x38/0x4c [ 8.694820] call_cpuidle+0x3c/0x68 [ 8.698408] do_idle+0x1a0/0x280 [ 8.701729] cpu_startup_entry+0x24/0x28 [ 8.705768] secondary_start_kernel+0x15c/0x170 [ 8.710423] [ 8.711972] Allocated by task 242: [ 8.715473] __kasan_kmalloc+0xf0/0x1ac [ 8.719426] kasan_slab_alloc+0x14/0x1c [ 8.723375] __kmalloc_track_caller+0x23c/0x388 [ 8.728040] devm_kmalloc+0x38/0x94 [ 8.731632] etm4_probe+0x48/0x3c8 [ 8.735140] amba_probe+0xbc/0x158 [ 8.738645] really_probe+0x144/0x408 [ 8.742412] driver_probe_device+0x70/0x140 [ 8.746716] __device_attach_driver+0x9c/0x110 [ 8.751287] bus_for_each_drv+0x90/0xd8 [ 8.755236] __device_attach+0xb4/0x164 [ 8.759188] device_initial_probe+0x20/0x2c [ 8.763490] bus_probe_device+0x34/0x94 [ 8.767436] device_add+0x34c/0x3e0 [ 8.771029] amba_device_try_add+0x68/0x440 [ 8.775332] amba_deferred_retry_func+0x48/0xc8 [ 8.779997] process_one_work+0x344/0x648 [ 8.784127] worker_thread+0x2ac/0x47c [ 8.787987] kthread+0x128/0x138 [ 8.791313] ret_from_fork+0x10/0x18 [ 8.794993] [ 8.796532] Freed by task 242: [ 8.799684] __kasan_slab_free+0x15c/0x22c [ 8.803897] kasan_slab_free+0x10/0x1c [ 8.807761] kfree+0x25c/0x4bc [ 8.810913] release_nodes+0x240/0x2b0 [ 8.814767] devres_release_all+0x3c/0x54 [ 8.818887] really_probe+0x178/0x408 [ 8.822661] driver_probe_device+0x70/0x140 [ 8.826963] __device_attach_driver+0x9c/0x110 [ 8.831539] bus_for_each_drv+0x90/0xd8 [ 8.835487] __device_attach+0xb4/0x164 [ 8.839431] device_initial_probe+0x20/0x2c [ 8.843732] bus_probe_device+0x34/0x94 [ 8.847678] device_add+0x34c/0x3e0 [ 8.851274] amba_device_try_add+0x68/0x440 [ 8.855576] amba_deferred_retry_func+0x48/0xc8 [ 8.860240] process_one_work+0x344/0x648 [ 8.864366] worker_thread+0x2ac/0x47c [ 8.868228] kthread+0x128/0x138 [ 8.871557] ret_from_fork+0x10/0x18 [ 8.875231] [ 8.876782] The buggy address belongs to the object at ffffff813304f800 [ 8.876782] which belongs to the cache kmalloc-1k of size 1024 [ 8.889632] The buggy address is located 200 bytes inside of [ 8.889632] 1024-byte region [ffffff813304f800, ffffff813304fc00) [ 8.901761] The buggy address belongs to the page: [ 8.906695] page:ffffffff04ac1200 refcount:1 mapcount:0 mapping:ffffff8146c03800 index:0x0 compound_mapcount: 0 [ 8.917047] flags: 0x4000000000010200(slab|head) [ 8.921799] raw: 4000000000010200 dead000000000100 dead000000000122 ffffff8146c03800 [ 8.929753] raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 [ 8.937703] page dumped because: kasan: bad access detected [ 8.943433] [ 8.944974] Memory state around the buggy address: [ 8.949903] ffffff813304f780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 8.957320] ffffff813304f800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.964742] >ffffff813304f880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.972157] ^ [ 8.977886] ffffff813304f900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.985298] ffffff813304f980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.992713] ================================================================== Fixes: f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states") Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-22-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Avoid casting void pointersStephen Boyd1-3/+6
We don't need to cast void pointers, such as the amba_id data. Assign to a local variable to make the code prettier and also return NULL instead of 0 to make sparse happy. Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Reviewed-by: Joe Perches <joe@perches.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-21-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Include required headers in C filesStephen Boyd4-2/+33
We should include headers that C files use in the C files that use them and avoid relying on implicit includes as much as possible. This helps avoid compiler errors in the future about missing declarations when header files change includes in the future. Cc: Douglas Anderson <dianders@chromium.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-20-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Initialize arg in sparse friendly wayStephen Boyd2-2/+2
Sparse gets annoyed when this initializer is 0 but the first struct member is a pointer. Just use { } to initialize instead so that sparse is quiet. Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-19-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Don't initialize variables unnecessarilyStephen Boyd1-4/+4
These variables are assigned again before they're used. Leave them unassigned at first so that the compiler can detect problems in the future with use before initialization. Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-18-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Mark some functions staticStephen Boyd4-6/+5
These functions aren't used outside the file they're in. Mark them static to indicate as such and silence tools like sparse. Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> [Dropped changes in coresight-cti.c and coresight-etb10.c] Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-17-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: etm4x: Add support for Neoverse N1 ETMAnurag Koul1-0/+1
Add PID for Arm Neoverse N1 ETM to the list of supported/known ETMs. Signed-off-by: Anurag Koul <anurag.koul@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-16-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: etmv4: Update default filter and initialisationMike Leach2-18/+7
Differing default states set on driver init / perf init and as a result of a sysfs reset. The ETMv4 can be programmed to trace the entire instruction address range without the need to use address comparator filter resources. (Described in the ETMv4.x technical reference manual) sysfs reset was using this method, perf and default driver init were setup with an address range comparator for the entire address range. The perf / driver init has been altered to use the method without needing any comparator address hardware. Minor adjustment to the vinst_ctrl register initialisation to ensure correct zero initialisation. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-15-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: tmc: Fix TMC mode read in tmc_read_prepare_etb()Sai Prakash Ranjan1-8/+8
On some QCOM platforms like SC7180, SDM845 and SM8150, reading TMC mode register without proper coresight power management can lead to async exceptions like the one in the call trace below in tmc_read_prepare_etb(). This can happen if the user tries to read the TMC etf data via device node without setting up source and the sink first. Fix this by having a check for coresight sysfs mode before reading TMC mode management register. Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 7 PID: 2605 Comm: hexdump Tainted: G S 5.4.30 #122 Call trace: dump_backtrace+0x0/0x188 show_stack+0x20/0x2c dump_stack+0xdc/0x144 panic+0x168/0x36c panic+0x0/0x36c arm64_serror_panic+0x78/0x84 do_serror+0x130/0x138 el1_error+0x84/0xf8 tmc_read_prepare_etb+0x88/0xb8 tmc_open+0x40/0xd8 misc_open+0x120/0x158 chrdev_open+0xb8/0x1a4 do_dentry_open+0x268/0x3a0 vfs_open+0x34/0x40 path_openat+0x39c/0xdf4 do_filp_open+0x90/0x10c do_sys_open+0x150/0x3e8 __arm64_compat_sys_openat+0x28/0x34 el0_svc_common+0xa8/0x160 el0_svc_compat_handler+0x2c/0x38 el0_svc_compat+0x8/0x10 Fixes: 4525412a5046 ("coresight: tmc: making prepare/unprepare functions generic") Reported-by: Stephen Boyd <swboyd@chromium.org> Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-14-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Fix support for sparsely populated portsSuzuki K Poulose2-26/+66
On some systems the firmware may not describe all the ports connected to a component (e.g, for security reasons). This could be especially problematic for "funnels" where we could end up in modifying memory beyond the allocated space for refcounts. e.g, for a funnel with input ports listed 0, 3, 5, nr_inport = 3. However the we could access refcnts[5] while checking for references, like : [ 526.110401] ================================================================== [ 526.117988] BUG: KASAN: slab-out-of-bounds in funnel_enable+0x54/0x1b0 [ 526.124706] Read of size 4 at addr ffffff8135f9549c by task bash/1114 [ 526.131324] [ 526.132886] CPU: 3 PID: 1114 Comm: bash Tainted: G S 5.4.25 #232 [ 526.140397] Hardware name: Qualcomm Technologies, Inc. SC7180 IDP (DT) [ 526.147113] Call trace: [ 526.149653] dump_backtrace+0x0/0x188 [ 526.153431] show_stack+0x20/0x2c [ 526.156852] dump_stack+0xdc/0x144 [ 526.160370] print_address_description+0x3c/0x494 [ 526.165211] __kasan_report+0x144/0x168 [ 526.169170] kasan_report+0x10/0x18 [ 526.172769] check_memory_region+0x1a4/0x1b4 [ 526.177164] __kasan_check_read+0x18/0x24 [ 526.181292] funnel_enable+0x54/0x1b0 [ 526.185072] coresight_enable_path+0x104/0x198 [ 526.189649] coresight_enable+0x118/0x26c ... [ 526.237782] Allocated by task 280: [ 526.241298] __kasan_kmalloc+0xf0/0x1ac [ 526.245249] kasan_kmalloc+0xc/0x14 [ 526.248849] __kmalloc+0x28c/0x3b4 [ 526.252361] coresight_register+0x88/0x250 [ 526.256587] funnel_probe+0x15c/0x228 [ 526.260365] dynamic_funnel_probe+0x20/0x2c [ 526.264679] amba_probe+0xbc/0x158 [ 526.268193] really_probe+0x144/0x408 [ 526.271970] driver_probe_device+0x70/0x140 ... [ 526.316810] [ 526.318364] Freed by task 0: [ 526.321344] (stack is not available) [ 526.325024] [ 526.326580] The buggy address belongs to the object at ffffff8135f95480 [ 526.326580] which belongs to the cache kmalloc-128 of size 128 [ 526.339439] The buggy address is located 28 bytes inside of [ 526.339439] 128-byte region [ffffff8135f95480, ffffff8135f95500) [ 526.351399] The buggy address belongs to the page: [ 526.356342] page:ffffffff04b7e500 refcount:1 mapcount:0 mapping:ffffff814b00c380 index:0x0 compound_mapcount: 0 [ 526.366711] flags: 0x4000000000010200(slab|head) [ 526.371475] raw: 4000000000010200 ffffffff05034008 ffffffff0501eb08 ffffff814b00c380 [ 526.379435] raw: 0000000000000000 0000000000190019 00000001ffffffff 0000000000000000 [ 526.387393] page dumped because: kasan: bad access detected [ 526.393128] [ 526.394681] Memory state around the buggy address: [ 526.399619] ffffff8135f95380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 526.407046] ffffff8135f95400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 526.414473] >ffffff8135f95480: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 526.421900] ^ [ 526.426029] ffffff8135f95500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 526.433456] ffffff8135f95580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 526.440883] ================================================================== To keep the code simple, we now track the maximum number of possible input/output connections to/from this component @ nr_inport and nr_outport in platform_data, respectively. Thus the output connections could be sparse and code is adjusted to skip the unspecified connections. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-13-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: etb10: Make coresight_etb_groups staticJason Yan1-1/+1
Fix the following sparse warning: drivers/hwtracing/coresight/coresight-etb10.c:720:30: warning: symbol 'coresight_etb_groups' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-12-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: cti: Make some symbols staticJason Yan1-3/+3
Fix the following sparse warning: drivers/hwtracing/coresight/coresight-cti.c:22:1: warning: symbol 'ect_net' was not declared. Should it be static? drivers/hwtracing/coresight/coresight-cti.c:625:32: warning: symbol 'cti_ops_ect' was not declared. Should it be static? drivers/hwtracing/coresight/coresight-cti.c:630:28: warning: symbol 'cti_ops' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-11-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: etm4x: Replace ETM PIDs with UCI IDs for Kryo385Sai Prakash Ranjan1-2/+2
Replace the AMBA ETM PIDs with UCI IDs to avoid future conflicts when adding the CTI support for QCOM Kryo385 CPU cores. Fixes: 17b4add0d4e0 ("coresight: etm4x: Add ETM PIDs for SDM845 and MSM8996") Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-10-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: etm4x: Add support for Qualcomm SC7180 SoCSai Prakash Ranjan1-0/+2
Add ETM UCI IDs for Qualcomm SC7180 SoC. It has 2 big CPU cores based on Cortex-A76 and 6 LITTLE CPU cores based on Cortex-A55. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-9-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: cti: Add in sysfs links to other coresight devicesMike Leach1-4/+48
Adds in sysfs links for connections where the connected device is another coresight device. This allows examination of the coresight topology. Non-coresight connections remain just as a reference name. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-6-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Expose device connections via sysfsSuzuki K Poulose3-12/+119
Coresight device connections are a bit complicated and is not exposed currently to the user. One has to look at the platform descriptions (DT bindings or ACPI bindings) to make an understanding. Given the new naming scheme, it will be helpful to have this information to choose the appropriate devices for tracing. This patch exposes the device connections via links in the sysfs directories. e.g, for a connection devA[OutputPort_X] -> devB[InputPort_Y] is represented as two symlinks: /sys/bus/coresight/.../devA/out:X -> /sys/bus/coresight/.../devB /sys/bus/coresight/.../devB/in:Y -> /sys/bus/coresight/.../devA Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> [Revised to use the generic sysfs links functions & link structures. Provides a connections sysfs group in each device to hold the links.] Co-developed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-5-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Add generic sysfs link creation functionsMike Leach3-1/+130
To allow the connections between coresight components to be represented in sysfs, generic methods for creating sysfs links between two coresight devices are added. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-4-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Add return value for fixup connectionsSuzuki K Poulose1-10/+14
Handle failures in fixing up connections for a newly registered device. This will be useful to handle cases where we fail to expose the links via sysfs for the connections. Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-3-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19coresight: Pass coresight_device for coresight_release_platform_dataSuzuki K Poulose3-5/+7
As we prepare to expose the links between the devices in sysfs, pass the coresight_device instance to the coresight_release_platform_data in order to free up the connections when the device is removed. No functional changes as such in this patch. Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200518180242.7916-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15coresight: cti: remove incorrect NULL return checkCalvin Johnson1-2/+2
fwnode_find_reference() doesn't return NULL and hence that check should be avoided. Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200507053547.13707-1-calvin.johnson@oss.nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-20docs: fix broken references to text filesMauro Carvalho Chehab1-1/+1
Several references got broken due to txt to ReST conversion. Several of them can be automatically fixed with: scripts/documentation-file-ref-check --fix Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # hwtracing/coresight/Kconfig Reviewed-by: Paul E. McKenney <paulmck@kernel.org> # memory-barrier.txt Acked-by: Alex Shi <alex.shi@linux.alibaba.com> # translations/zh_CN Acked-by: Federico Vaga <federico.vaga@vaga.pv.it> # translations/it_IT Acked-by: Marc Zyngier <maz@kernel.org> # kvm/arm64 Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/6f919ddb83a33b5f2a63b6b5f0575737bb2b36aa.1586881715.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-03-21coresight: cti: Add connection information to sysfsMike Leach3-3/+346
Dynamically adds sysfs attributes for all connections defined in the CTI. Each connection has a triggers<N> sub-directory with name, in_signals, in_types, out_signals and out_types as read-only parameters in the directory. in_ or out_ parameters may be omitted if there are no in or out signals for the connection. Additionally each device has a nr_cons in the connections sub-directory. This allows clients to explore the connection and trigger signal details without needing to refer to device tree or specification of the device. Standardised type information is provided for certain common functions - e.g. snk_full for a trigger from a sink indicating full. Otherwise type defaults to genio. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200320165303.13681-10-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21coresight: cti: Enable CTI associated with devicesMike Leach4-5/+204
The CoreSight subsystem enables a path of devices from source to sink. Any CTI devices associated with the path devices must be enabled at the same time. This patch adds an associated coresight_device element to the main coresight device structure, and uses this to create associations between the CTI and other devices based on the device tree data. The associated device element is used to enable CTI in conjunction with the path elements. CTI devices are reference counted so where a single CTI is associated with multiple elements on the path, it will be enabled on the first associated device enable, and disabled with the last associated device disable. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200320165303.13681-9-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21coresight: cti: Add device tree support for custom CTIMike Leach2-4/+241
Adds support for CTIs whose connections are implementation defined at hardware design time, and not constrained by v8 architecture. These CTIs have no standard connection setup, all the settings have to be defined in the device tree files. The patch creates a set of connections and trigger signals based on the information provided. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200320165303.13681-8-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21coresight: cti: Add device tree support for v8 arch CTIMike Leach4-9/+230
The v8 architecture defines the relationship between a PE, its optional ETM and a CTI. Unlike non-architectural CTIs which are implementation defined, this has a fixed set of connections which can therefore be represented as a simple tag in the device tree. This patch defines the tags needed to create an entry for this PE/ETM/CTI relationship, and provides functionality to implement the connection model in the CTI driver. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200320165303.13681-7-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21coresight: cti: Add sysfs trigger / channel programming APIMike Leach3-0/+551
Adds a user API to allow programming of CTI by trigger ID and channel number. This will take the channel and trigger ID supplied by the user and program the appropriate register values. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200320165303.13681-5-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21coresight: cti: Add sysfs access to program function registersMike Leach4-0/+397
Adds in sysfs programming support for the CTI function register sets. Allows direct manipulation of channel / trigger association registers. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200320165303.13681-4-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21coresight: cti: Add sysfs coresight mgmt register accessMike Leach2-0/+54
Adds sysfs access to the coresight management registers. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200320165303.13681-3-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21coresight: cti: Initial CoreSight CTI DriverMike Leach7-0/+786
This introduces a baseline CTI driver and associated configuration files. Uses the platform agnostic naming standard for CoreSight devices, along with a generic platform probing method that currently supports device tree descriptions, but allows for the ACPI bindings to be added once these have been defined for the CTI devices. Driver will probe for the device on the AMBA bus, and load the CTI driver on CoreSight ID match to CTI IDs in tables. Initial sysfs support for enable / disable provided. Default CTI interconnection data is generated based on hardware register signal counts, with no additional connection information. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200320165303.13681-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14coresight: etm4x: Fix unused function warningArnd Bergmann1-7/+6
Some of the newly added code in the etm4x driver is inside of an #ifdef, and some other code is outside of it, leading to a harmless warning when CONFIG_CPU_PM is disabled: drivers/hwtracing/coresight/coresight-etm4x.c:68:13: error: 'etm4_os_lock' defined but not used [-Werror=unused-function] static void etm4_os_lock(struct etmv4_drvdata *drvdata) ^~~~~~~~~~~~ To avoid the warning and simplify the the #ifdef checks, use IS_ENABLED() instead, so the compiler can drop the unused functions without complaining. Fixes: f188b5e76aae ("coresight: etm4x: Save/restore state across CPU low power states") Signed-off-by: Arnd Bergmann <arnd@arndb.de> [Fixed capital 'f' in title] Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191213223107.1484-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-19coresight: replicator: Fix missing spin_lock_init()Wei Yongjun1-0/+1
The driver allocates the spinlock but not initialize it. Use spin_lock_init() on it to initialize it correctly. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Tested-by: Yabin Cui <yabinc@google.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191118185207.30441-3-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-19coresight: funnel: Fix missing spin_lock_init()Wei Yongjun1-0/+1
The driver allocates the spinlock but not initialize it. Use spin_lock_init() on it to initialize it correctly. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Tested-by: Yabin Cui <yabinc@google.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191118185207.30441-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04coresight: etm4x: Fix BMVAL misuseRikard Falkeborn1-1/+1
The second argument should be the lsb and the third argument should be the msb. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191104181251.26732-15-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04coresight: Serialize enabling/disabling a link device.Yabin Cui4-52/+90
When tracing etm data of multiple threads on multiple cpus through perf interface, some link devices are shared between paths of different cpus. It creates race conditions when different cpus wants to enable/disable the same link device at the same time. Example 1: Two cpus want to enable different ports of a coresight funnel, thus calling the funnel enable operation at the same time. But the funnel enable operation isn't reentrantable. Example 2: For an enabled coresight dynamic replicator with refcnt=1, one cpu wants to disable it, while another cpu wants to enable it. Ideally we still have an enabled replicator with refcnt=1 at the end. But in reality the result is uncertain. Since coresight devices claim themselves when enabled for self-hosted usage, the race conditions above usually make the link devices not usable after many cycles. To fix the race conditions, this patch uses spinlocks to serialize enabling/disabling link devices. Fixes: a06ae8609b3d ("coresight: add CoreSight core layer framework") Signed-off-by: Yabin Cui <yabinc@google.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: stable <stable@vger.kernel.org> # 5.3 Link: https://lore.kernel.org/r/20191104181251.26732-14-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04coresight: Add explicit architecture dependencyMark Brown1-0/+1
Coresight hardware is only likely to appear on Arm systems and currently the core code has Arm-specific barrier operations in it so can't be built anywhere else so add an explicit dependency saying so. This will make no practical difference currently due to the way subsystems are referenced, the subsystem is only pulled in on arm and arm64, so mainly serves as documentation in case someone wants to increase build coverage. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191104181251.26732-13-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04coresight: etm4x: Add missing single-shot control API to sysfsMike Leach3-1/+149
An API to control single-shot comparator operation was missing from sysfs. This adds the parameters to sysfs to allow programming of this feature. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191104181251.26732-12-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04coresight: etm4x: Add view comparator settings API to sysfs.Mike Leach1-0/+52
Currently it is not possible to view the current settings of a given address comparator without knowing what type it is set to. For example, if a comparator is set as an addr_start comparator, attempting to read addr_stop for the same index will result in an error. addr_cmp_view is added to allow the user to see the current settings of the indexed address comparator without resorting to trial and error when the set type is not known. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191104181251.26732-11-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04coresight: etm4x: Improve usability of sysfs - CID and VMID masks.Mike Leach1-2/+8
Context ID and VM ID masks required 2 value inputs, even when the second value is ignored as insufficient CID / VMID comparators are implemented. Permit a single value to be used if that is sufficient to cover all implemented comparators. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191104181251.26732-10-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04coresight: etm4x: Improve usability of sysfs - include/exclude addr.Mike Leach1-5/+9
Setting include / exclude on a range had to be done by setting the bit in 'mode' before setting the range. However, setting this bit also had the effect of altering the current range as well. Changed to only set include / exclude setting of a range at the point of setting that range. Either use a 3rd input parameter as the include exclude value, or if not present use the current value of 'mode'. Do not change current range when 'mode' changes. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191104181251.26732-9-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04coresight: etm4x: Fix issues with start-stop logic.Mike Leach2-4/+36
Fixes the following issues when using the ETMv4 start-stop logic. 1) Setting a start or a stop address should not automatically set the start-stop status to 'on'. The value set by the user in 'mode' must be respected or start instances could be missed. 2) Missing API for controlling TRCVIPCSSCTLR - start stop control by PE comparators. 3) Default ETM configuration sets a trace all range, and correctly sets the start-stop status bit. This was not being correctly reflected in the 'mode' parameter. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191104181251.26732-8-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04coresight: etm4x: Add missing API to set EL match on address filtersMike Leach1-0/+42
TRCACATRn registers have match bits for secure and non-secure exception levels which are not accessible by the sysfs API. This adds a new sysfs parameter to enable this - addr_exlevel_s_ns. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191104181251.26732-7-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04coresight: etm4x: Fix input validation for sysfs.Mike Leach1-8/+13
A number of issues are fixed relating to sysfs input validation:- 1) bb_ctrl_store() - incorrect compare of bit select field to absolute value. Reworked per ETMv4 specification. 2) seq_event_store() - incorrect mask value - register has two event values. 3) cyc_threshold_store() - must mask with max before checking min otherwise wrapped values can set illegal value below min. 4) res_ctrl_store() - update to mask off all res0 bits. Reviewed-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Mike Leach <mike.leach@linaro.org> Fixes: a77de2637c9eb ("coresight: etm4x: moving sysFS entries to a dedicated file") Cc: stable <stable@vger.kernel.org> # 4.9+ Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191104181251.26732-6-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04coresight: etm4x: Fixes for ETM v4.4 architecture updates.Mike Leach3-11/+21
ETMv4.4 adds in support for tracing secure EL2 (per arch 8.x updates). Patch accounts for this new capability. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191104181251.26732-5-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04coresight: etm4x: Add support for ThunderX2Tanmay Vilas Kumar Jagdale1-0/+1
Add ETMv4 periperhal ID for Marvell's ThunderX2 chip. This chip contains ETMv4.1 version. Signed-off-by: Tanmay Vilas Kumar Jagdale <tanmay@marvell.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191104181251.26732-4-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04coresight: etm4x: Save/restore state across CPU low power statesAndrew Murray3-0/+388
Some hardware will ignore bit TRCPDCR.PU which is used to signal to hardware that power should not be removed from the trace unit. Let's mitigate against this by conditionally saving and restoring the trace unit state when the CPU enters low power states. This patchset introduces a firmware property named 'arm,coresight-loses-context-with-cpu' - when this is present the hardware state will be conditionally saved and restored. A module parameter 'pm_save_enable' is also introduced which can be configured to override the firmware property. This can be set to never allow save/restore or to conditionally allow it (only for self-hosted). The default value is determined by firmware. We avoid saving the hardware state when self-hosted coresight isn't in use to reduce PM latency - we can't determine this by reading the claim tags (TRCCLAIMCLR) as these are 'trace' registers which need power and clocking, something we can't easily provide in the PM context. Therefore we rely on the existing drvdata->mode internal state that is set when self-hosted coresight is used (and powered). Signed-off-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191104181251.26732-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-18Merge tag 'char-misc-5.4-rc1' of ↵Linus Torvalds10-99/+176
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver pull request for 5.4-rc1. As has been happening in previous releases, more and more individual driver subsystem trees are ending up in here. Now if that is good or bad I can't tell, but hopefully it makes your life easier as it's more of an aggregation of trees together to one merge point for you. Anyway, lots of stuff in here: - habanalabs driver updates - thunderbolt driver updates - misc driver updates - coresight and intel_th hwtracing driver updates - fpga driver updates - extcon driver updates - some dma driver updates - char driver updates - android binder driver updates - nvmem driver updates - phy driver updates - parport driver fixes - pcmcia driver fix - uio driver updates - w1 driver updates - configfs fixes - other assorted driver updates All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits) misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation habanalabs: correctly cast variable to __le32 habanalabs: show correct id in error print habanalabs: stop using the acronym KMD habanalabs: display card name as sensors header habanalabs: add uapi to retrieve aggregate H/W events habanalabs: add uapi to retrieve device utilization habanalabs: Make the Coresight timestamp perpetual habanalabs: explicitly set the queue-id enumerated numbers habanalabs: print to kernel log when reset is finished habanalabs: replace __le32_to_cpu with le32_to_cpu habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64 habanalabs: Handle HW_IP_INFO if device disabled or in reset habanalabs: Expose devices after initialization is done habanalabs: improve security in Debug IOCTL habanalabs: use default structure for user input in Debug IOCTL habanalabs: Add descriptive name to PSOC app status register habanalabs: Add descriptive names to PSOC scratch-pad registers habanalabs: create two char devices per ASIC habanalabs: change device_setup_cdev() to be more generic ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-09 12:16:00 +0000