summaryrefslogtreecommitdiffstats
path: root/drivers/hwspinlock
AgeCommit message (Collapse)AuthorFilesLines
2019-06-29hwspinlock: add the 'in_atomic' APIFabien Dessenne1-13/+30
Add the 'in_atomic' mode which can be called from an atomic context. This mode relies on the existing 'raw' mode (no lock, no preemption/irq disabling) with the difference that the timeout is not based on jiffies (jiffies won't increase when irq are disabled) but handled with busy-waiting udelay() calls. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-29hwspinlock: stm32: implement the relax() opsFabien Dessenne1-0/+7
Implement this optional ops, called by hwspinlock core while spinning on a lock, between two successive invocations of trylock(). Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-29hwspinlock: ignore disabled deviceFabien Dessenne1-0/+5
Do not wait for hwspinlock device registration if it is not available for use. Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-29hwspinlock/omap: Add a trace during probeSuman Anna1-0/+3
Add a debug level trace statement in the OMAP HwSpinlock driver probe function to print the number of hwlocks on a successful registration. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-29hwspinlock/omap: Add support for TI K3 SoCsSuman Anna2-1/+2
A HwSpinlock IP is also present on the newer TI K3 AM65x and J721E family of SoCs within the Main NavSS sub-module. Reuse the existing OMAP Hwspinlock driver to extend the support for this IP on K3 AM65x SoCs as well. The IP has slightly different bit-fields in the SYSCONFIG and SYSSTATUS registers. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-01-03hwspinlock: fix return value check in stm32_hwspinlock_probe()Wei Yongjun1-2/+2
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: f24fcff1d267 ("hwspinlock: add STM32 hwspinlock device") Acked-by: Benjamin Gaignard <benjamin.gaignard@gmail.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-12-05hwspinlock: add STM32 hwspinlock deviceBenjamin Gaignard3-0/+166
This patch adds support of hardware semaphores for stm32mp1 SoC. The hardware block provides 32 semaphores. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30hwspinlock: Fix incorrect return pointersBaolin Wang1-4/+4
The commit 4f1acd758b08 ("hwspinlock: Add devm_xxx() APIs to request/free hwlock") introduces one bug, that will return one error pointer if failed to request one hwlock, but we expect NULL pointer on error for consumers. This patch will fix this issue. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-26hwspinlock: Fix one comment mistakeBaolin Wang1-1/+1
Fix one comment mistake with correct function names. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-26hwspinlock: Add devm_xxx() APIs to register/unregister one hwlock controllerBaolin Wang1-0/+82
This patch introduces devm_hwspin_lock_register() and devm_hwspin_lock_unregister() interfaces to help to register or unregister one hardware spinlock controller, that will help to simplify the cleanup code for hwspinlock drivers. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-26hwspinlock: Add devm_xxx() APIs to request/free hwlockBaolin Wang1-0/+110
This patch introduces some devm_xxx() APIs to help to request or free the hwlocks, which will help to simplify the cleanup code for drivers requesting one hwlock, ensuring that the hwlock is automatically freed whenever the device is unbound. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-26hwspinlock: Add one new API to support getting a specific hwlock by the nameBaolin Wang1-0/+29
The hardware spinlock binding already supplied the 'hwlock-names' property to match and get a specific hwlock, but did not supply one API for users to get a specific hwlock by the hwlock name. So this patch introduces one API to support this requirement. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-11Merge tag 'hwlock-v4.18' of git://github.com/andersson/remoteprocLinus Torvalds8-72/+59
Pull hwspinlock updates from Bjorn Andersson: "In addition to migrating the files to use SPDX license headers this introduces the ability for clients to operate a hwlock without the framework taking any additional locks" * tag 'hwlock-v4.18' of git://github.com/andersson/remoteproc: hwspinlock/u8500: Switch to SPDX license identifier hwspinlock: sprd: Switch to SPDX license identifier hwspinlock/sirf: Switch to SPDX license identifier hwspinlock: qcom: Switch to SPDX license identifier hwspinlock/omap: Switch to SPDX license identifier hwspinlock/core: Switch to SPDX license identifier hwspinlock: Introduce one new mode for hwspinlock hwspinlock: Convert to use 'switch' statement
2018-06-06treewide: Use struct_size() for devm_kmalloc() and friendsKees Cook1-2/+4
Replaces open-coded struct size calculations with struct_size() for devm_*, f2fs_*, and sock_* allocations. Automatically generated (and manually adjusted) from the following Coccinelle script: // Direct reference to struct field. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(HANDLE, sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(HANDLE, CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-06treewide: Use struct_size() for kmalloc()-familyKees Cook2-2/+2
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This patch makes the changes for kmalloc()-family (and kvmalloc()-family) uses. It was done via automatic conversion with manual review for the "CHECKME" non-standard cases noted below, using the following Coccinelle script: // pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len * // sizeof *pkey_cache->table, GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-24hwspinlock/u8500: Switch to SPDX license identifierSuman Anna1-9/+1
Use the appropriate SPDX license identifier in the U8500 HWSEM driver source file and drop the previous boilerplate license text. Cc: Mathieu J. Poirier <mathieu.poirier@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-24hwspinlock: sprd: Switch to SPDX license identifierSuman Anna1-9/+1
Use the appropriate SPDX license identifiers in the Spreadtrum hardware spinlock driver source file and drop the previous boilerplate license text. Cc: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-24hwspinlock/sirf: Switch to SPDX license identifierSuman Anna1-2/+1
Use the appropriate SPDX license identifier in the CSR's SIRF hardware spinlock driver source file and drop the previous boilerplate license text. Cc: Wei Chen <wei.chen@csr.com> Cc: Barry Song <baohua@kernel.org> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-24hwspinlock: qcom: Switch to SPDX license identifierSuman Anna1-9/+1
Use the appropriate SPDX license identifier in the Qualcomm Hwspinlock driver source file and drop the previous boilerplate license text. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-24hwspinlock/omap: Switch to SPDX license identifierSuman Anna1-9/+1
Use the appropriate SPDX license identifier in the OMAP hwspinlock driver source file and drop the previous boilerplate license text. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-24hwspinlock/core: Switch to SPDX license identifierSuman Anna3-18/+3
Use the appropriate SPDX license identifier in the Hwspinlock core driver source files and drop the previous boilerplate license text. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-17hwspinlock: Introduce one new mode for hwspinlockBaolin Wang1-7/+27
In some scenarios, user need do some time-consuming or sleepable operations under the hardware spinlock protection for synchronization between the multiple subsystems. For example, there is one PMIC efuse on Spreadtrum platform, which need to be accessed under one hardware lock. But during the hardware lock protection, the efuse operation is time-consuming to almost 5 ms, so we can not disable the interrupts or preemption so long in this case. Thus we can introduce one new mode to indicate that we just acquire the hardware lock and do not disable interrupts or preemption, meanwhile we should force user to protect the hardware lock with mutex or spinlock to avoid dead-lock. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-17hwspinlock: Convert to use 'switch' statementBaolin Wang1-9/+24
We have different hwspinlock modes to select, thus it will be more readable to handle different modes with using 'switch' statement instead of 'if' statement. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-11-17Merge tag 'hwlock-v4.15' of git://github.com/andersson/remoteprocLinus Torvalds1-1/+1
Pull hwspinlock update from Bjorn Andersson: "This changes the HWSPINLOCK core Kconfig option to bool, to aid when other core code depends on it" * tag 'hwlock-v4.15' of git://github.com/andersson/remoteproc: hwspinlock: Change hwspinlock to a bool
2017-11-06hwspinlock: Change hwspinlock to a boolBaolin Wang1-1/+1
Change hwspinlock to a bool in case some drivers will meet dependency issue when hwspinlock is built as a module. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-17hwspinlock: sprd: Add hardware spinlock driverBaolin Wang3-0/+193
The Spreadtrum hardware spinlock device can provide hardware assistance for synchronization between the multiple subsystems. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-05-17Make HWSPINLOCK a menuconfig to ease disablingVincent Legoll1-11/+6
So that there's no need to get into the submenu to disable all related config entries. Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-07-06hwspinlock: qcom_hwspinlock: add missing of_node_put after calling ↵Peter Chen1-0/+1
of_parse_phandle of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-05-20drivers/hwspinlock: use correct radix tree APIMatthew Wilcox1-1/+1
radix_tree_is_indirect_ptr() is an internal API. The correct call to use is radix_tree_deref_retry() which has the appropriate unlikely() annotation. Fixes: c6400ba7e13a ("drivers/hwspinlock: fix race between radix tree insertion and lookup") Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Jan Kara <jack@suse.com> Cc: Neil Brown <neilb@suse.de> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-03drivers/hwspinlock: fix race between radix tree insertion and lookupMatthew Wilcox1-0/+4
of_hwspin_lock_get_id() is protected by the RCU lock, which means that insertions can occur simultaneously with the lookup. If the radix tree transitions from a height of 0, we can see a slot with the indirect_ptr bit set, which will cause us to at least read random memory, and could cause other havoc. Fix this by using the newly introduced radix_tree_iter_retry(). Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-01hwspinlock: qcom: Correct msb in regmap_fieldBjorn Andersson1-1/+1
msb of the regmap_field was mistakenly given the value 32, to set all bits in the regmap update mask; although incorrect this worked until 921cc294, where the mask calculation was corrected. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2015-06-12hwspinlock: add a CSR atlas7 driverWei Chen3-0/+149
Add hwspinlock support for the CSR atlas7 SoC. The Hardware Spinlock device on atlas7 provides hardware assistance for synchronization between the multiple processors in the system (dual Cortex-A7, CAN bus Cortex-M3 and audio DSP). Reviewed-by: Suman Anna <s-anna@ti.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Wei Chen <wei.chen@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2015-05-02hwspinlock: qcom: Add support for Qualcomm HW Mutex blockBjorn Andersson3-0/+194
Add driver for Qualcomm Hardware Mutex block found in many Qualcomm SoCs. Based on initial effort by Kumar Gala <galak@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Reviewed-by: Andy Gross <agross@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2015-05-02hwspinlock/omap: add support for dt nodesSuman Anna1-4/+14
HwSpinlock IP is present only on OMAP4 and other newer SoCs, which are all device-tree boot only. This patch adds the base support for parsing the DT nodes, and removes the code dealing with the traditional platform device instantiation. Signed-off-by: Suman Anna <s-anna@ti.com> [tony@atomide.com: ack for legacy file removal] Acked-by: Tony Lindgren <tony@atomide.com> [comment on the imperfect always-zero base_id] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2015-05-02hwspinlock/core: add device tree supportSuman Anna1-0/+79
This patch adds a new OF-friendly API of_hwspin_lock_get_id() for hwspinlock clients to use/request locks from a hwspinlock device instantiated through a device-tree blob. This new API can be used by hwspinlock clients to get the id for a specific lock using the phandle + args specifier, so that it can be requested using the available hwspin_lock_request_specific() API. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> [small comment clarification] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2014-10-20hwspinlock: drop owner assignment from platform_driversWolfram Sang2-2/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-07-29hwspinlock: enable OMAP build for AM33xx, AM43xx & DRA7xxSuman Anna1-1/+1
HwSpinlocks are supported on TI's AM33xx, AM43xx and DRA7xx SoC device families as well. The IPs are identical to that of OMAP4/OMAP5, except for the number of locks. Add a depends on to the above family of SoCs to enable the build support for OMAP hwspinlock driver for any of the above SoC configs. Signed-off-by: Suman Anna <s-anna@ti.com> [small commit log changes] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2014-07-29hwspinlock/omap: enable module before reading SYSSTATUS registerSuman Anna1-7/+20
The number of hwspinlocks are determined based on the value read from the IP block's SYSSTATUS register. However, the module may not be enabled and clocked, and the read may result in a bus error. This particular issue is seen rather easily on AM33XX, since the module wakeup is software controlled, and it is disabled out of reset. Make sure the module is enabled and clocked before reading the SYSSTATUS register. Signed-off-by: Suman Anna <s-anna@ti.com> [replace pm_runtime_put_sync with lenient pm_runtime_put] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-05-07Merge tag 'hwspinlock-3.10' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock Pullhwspinlock update from Ohad Ben-Cohen: "A single patch from Vincent extending OMAP's hwspinlock support to OMAP5" * tag 'hwspinlock-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock: hwspinlock/omap: support OMAP5 as well
2013-04-05hwspinlock: fix __hwspin_lock_request error pathLi Fei1-0/+2
Even in failed case of pm_runtime_get_sync, the usage_count is incremented. In order to keep the usage_count with correct value and runtime power management to behave correctly, call pm_runtime_put_noidle in such case. In __hwspin_lock_request, module_put is also called before return in pm_runtime_get_sync failed case. Cc: stable@vger.kernel.org Signed-off-by Liu Chuansheng <chuansheng.liu@intel.com> Signed-off-by: Li Fei <fei.li@intel.com> [edit commit log] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-05hwspinlock/omap: support OMAP5 as wellVincent Stehlé1-1/+1
OMAP5 has spinlocks, too. Signed-off-by: Vincent Stehlé <v-stehle@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-11-28hwspinlock: remove use of __devexitBill Pemberton2-2/+2
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28hwspinlock: remove use of __devinitBill Pemberton2-2/+2
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28hwspinlock: remove use of __devexit_pBill Pemberton2-2/+2
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10hwspinlock/core: move the dereference below the NULL testWei Yongjun1-1/+2
The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-07-07hwspinlock/core: use global ID to register hwspinlocks on multiple devicesShinya Kuribayashi1-2/+2
Commit 300bab9770 (hwspinlock/core: register a bank of hwspinlocks in a single API call, 2011-09-06) introduced 'hwspin_lock_register_single()' to register numerous (a bank of) hwspinlock instances in a single API, 'hwspin_lock_register()'. At which time, 'hwspin_lock_register()' accidentally passes 'local IDs' to 'hwspin_lock_register_single()', despite that ..._single() requires 'global IDs' to register hwspinlocks. We have to convert into global IDs by supplying the missing 'base_id'. Cc: stable <stable@vger.kernel.org> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> [ohad: fix error path of hwspin_lock_register, too] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-11-08Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: drivers/media: video/a5k6aa is a module and so needs module.h mfd: fix build failures in recently added ab5500 code hwspinlock/u8500: include linux/module.h MTD: MAPS: bcm963xx-flash.c: explicitly include module.h
2011-11-08hwspinlock/u8500: fix build error due to undefined labelAxel Lin1-4/+2
Fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c: In function 'u8500_hsem_probe': drivers/hwspinlock/u8500_hsem.c:113: error: label 'free_state' used but not defined Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-11-07hwspinlock/u8500: include linux/module.hAxel Lin1-0/+1
Include module.h to fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c:177: error: 'THIS_MODULE' undeclared here (not in a function) [...] drivers/hwspinlock/u8500_hsem.c:196: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/hwspinlock/u8500_hsem.c:196: warning: function declaration isn't a prototype make[2]: *** [drivers/hwspinlock/u8500_hsem.o] Error 1 make[1]: *** [drivers/hwspinlock] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 18:23:20 +0000