summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
AgeCommit message (Collapse)AuthorFilesLines
2010-03-06Merge branch 'hwmon-for-linus' of ↵Linus Torvalds12-1484/+2923
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (23 commits) hwmon: Remove the deprecated adt7473 driver hwmon: Fix off-by-one kind values hwmon: (tmp421) Fix temperature conversions hwmon: (tmp421) Restore missing inputs hwmon: Driver for Andigilog aSC7621 family monitoring chips hwmon: (adt7411) Improve locking hwmon: Add driver for ADT7411 voltage and temperature sensor hwmon: (w83793) Add watchdog functionality hwmon: (g760a) Make rpm_from_cnt static hwmon: (it87) Validate auto pwm settings hwmon: (it87) Add support for old automatic fan speed control hwmon: (it87) Drop dead web links in documentation hwmon: (it87) Add an entry in MAINTAINERS hwmon: (it87) Use strict_strtol instead of simple_strtol hwmon: (it87) Fix many checkpatch errors and warnings hwmon: (it87) Add support for beep on alarm hwmon: (it87) Create vid attributes by group hwmon: (it87) Refactor attributes creation and removal hwmon: (it87) Expose the PWM/temperature mappings hwmon: (it87) Display fan outputs in automatic mode as such ...
2010-03-06drivers/hwmon/adcxx.c: fix for single-channel ADCsJosé Miguel Gonçalves1-5/+10
While testing an ADC121S021 in an embedded board with a S3C2142 SoC (ARM core), I have found that the 'adcxx' driver does not handle correctly single channel ADCs from this chip family. For single channel chips you must only issue one read transfer for correct measurement. Signed-off-by: Jose Miguel Goncalves <jose.goncalves@inov.pt> Cc: Marc Pignat <marc.pignat@hevs.ch> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06drivers/hwmon/vt8231.c: fix continuation line formatsJoe Perches1-2/+1
String constants that are continued on subsequent lines with \ will cause spurious whitespace in the resulting output. Signed-off-by: Joe Perches <joe@perches.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05hwmon: Remove the deprecated adt7473 driverAmerigo Wang3-1195/+0
adt7473 driver is obsoleted by adt7475 driver. And it is scheduled to be removed in Feb 2010. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05hwmon: Fix off-by-one kind valuesJean Delvare3-15/+11
Recent changes on the I2C front have left off-by-one array indexes in 3 hwmon drivers. Fix them. Faulty commit: e5e9f44c2 i2c: Drop I2C_CLIENT_INSMOD_2 to 8 Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Andre Prendel <andre.prendel@gmx.de> Cc: stable@kernel.org
2010-03-05hwmon: (tmp421) Fix temperature conversionsJean Delvare1-2/+4
The low bits of temperature registers are status bits, they must be masked out before converting the register values to temperatures. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Andre Prendel <andre.prendel@gmx.de> Cc: stable@kernel.org
2010-03-05hwmon: (tmp421) Restore missing inputsJean Delvare1-7/+7
An off-by-one error caused some inputs to not be created by the driver when they should. TMP421 gets only one input instead of two, TMP422 gets two instead of three, etc. Fix the bug by listing explicitly the number of inputs each device has. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Andre Prendel <andre.prendel@gmx.de> Cc: stable@kernel.org
2010-03-05hwmon: Driver for Andigilog aSC7621 family monitoring chipsGeorge Joseph3-0/+1269
Hwmon driver for Andigilog aSC7621 family monitoring chips. Signed-off-by: George Joseph <george.joseph@fairview5.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05hwmon: (adt7411) Improve lockingWolfram Sang1-7/+14
Add proper locking for the cached variables. Also get rid of ref_is_vdd, which became obsolete. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05hwmon: Add driver for ADT7411 voltage and temperature sensorWolfram Sang3-0/+370
Add basic support for the ADT7411. Reads out all conversion results (via I2C, SPI yet missing) and allows some on-the-fly configuration. Tested with a custom board. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05hwmon: (w83793) Add watchdog functionalitySven Anders2-4/+481
Add watchdog functionality to the Winbond W83793 driver. Signed-off-by: Sven Anders <anders@anduras.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05hwmon: (g760a) Make rpm_from_cnt staticJean Delvare1-1/+1
Function rpm_from_cnt is only used internally so it can be made static. Make it inline while we're here, for performance reasons (although hopefully gcc would figure out by itself...) Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Acked-by: Martin Michlmayr <tbm@cyrius.com>
2010-03-05hwmon: (it87) Validate auto pwm settingsJean Delvare1-0/+32
Before switching to automatic fan control mode, make sure that all the trip points make sense. Otherwise, the control loop could lead to weird fan behavior. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05hwmon: (it87) Add support for old automatic fan speed controlJean Delvare1-2/+180
Add support for the automatic fan speed control interface as implemented by IT8705F chips up to revision F and IT8712F chips up to revision G. This implementation fits very well in our standard sysfs interface. I implemented the old and not the new interface because the only chip I have at hand is an old one, and the new interface is more difficult to map to the standard sysfs interface. Adding support later should be possible though, if someone with a supported chip is interested. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05hwmon: (it87) Use strict_strtol instead of simple_strtolJean Delvare1-15/+44
For consistency and robustness, use strict_strtol instead of simple_strtol. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05hwmon: (it87) Fix many checkpatch errors and warningsJean Delvare1-75/+87
Fix 20 errors and 11 warnings reported by the checkpatch script. The remainining errors would require more work. The remaining warnings will be addressed later. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05hwmon: (it87) Add support for beep on alarmJean Delvare1-0/+122
The IT87xxF chips support beeping on alarm, if properly wired and configured. There is one control bit for each input type (temperature, fan, voltage.) Let the user see and change them. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05hwmon: (it87) Create vid attributes by groupJean Delvare1-8/+7
Only VID-related attributes are left in it87_attributes_opt, so we might as well rename it to it87_attributes_vid and use this group to create all attributes at once. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05hwmon: (it87) Refactor attributes creation and removalJean Delvare1-130/+103
There is a lot of code redundancy in the creation of the fan and pwm attributes. Move these attributes to arrays so that the code can be simplified. This in turns makes the attributes removal code larger, so move it to a separate function that can be called in both the standard removal case and the error path during probing. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05hwmon: (it87) Expose the PWM/temperature mappingsJean Delvare1-4/+69
Let the user read the PWM-to-temperature mappings. Until the trip points are also exposed, this is essentially a way to know how the BIOS has set things up. The ability to change the settings will be added later, together with the trip points. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05hwmon: (it87) Display fan outputs in automatic mode as suchJean Delvare1-38/+61
The it87 driver doesn't yet support automatic fan control. Let it at least tell the user when a fan output is in automatic mode. Also let the user switch from automatic mode (possibly set by the BIOS) to manual mode and back without losing the settings. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05hwmon: (lm90) Add SMBus alert supportJean Delvare1-0/+63
Tested successfully with an ADM1032 chip on its evaluation board. It should work fine with all other chips as well. At this point this is more of a proof-of-concept, we don't do anything terribly useful on SMBus alert: we simply log the event. But this could later evolve into libsensors signaling so that user-space applications can take an appropriate action. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Trent Piepho <tpiepho@freescale.com>
2010-03-05hwmon: (lm90) Restore configuration on exitJean Delvare1-4/+10
Restore the chip configuration when unloading the driver. This ensures we don't leave the chip running if it was initially stopped. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-05hwmon: (lm90) Add support for the Winbond/Nuvoton W83L771AWG/ASGJean Delvare2-3/+14
This chips is found on several Zotac Ion ITX boards, amongst others. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: MC Matti <mcmatti17@googlemail.com> Cc: Manuel Lamotte-Schubert <mls@pronego.com>
2010-02-17Merge commit 'origin/master' into nextBenjamin Herrenschmidt3-27/+26
2010-02-05hwmon: (w83781d) Request I/O ports individually for probingJean Delvare1-13/+13
Different motherboards have different PNP declarations for W83781D/W83782D chips. Some declare the whole range of I/O ports (8 ports), some declare only the useful ports (2 ports at offset 5) and some declare fancy ranges, for example 4 ports at offset 4. To properly handle all cases, request all ports individually for probing. After we have determined that we really have a W83781D or W83782D chip, the useful port range will be requested again, as a single block. I did not see a board which needs this yet, but I know of one for lm78 driver and I'd like to keep the logic of these two drivers in sync. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2010-02-05hwmon: (lm78) Request I/O ports individually for probingJean Delvare1-13/+12
Different motherboards have different PNP declarations for LM78/LM79 chips. Some declare the whole range of I/O ports (8 ports), some declare only the useful ports (2 ports at offset 5) and some declare fancy ranges, for example 4 ports at offset 4. To properly handle all cases, request all ports individually for probing. After we have determined that we really have an LM78 or LM79 chip, the useful port range will be requested again, as a single block. This fixes the driver on the Olivetti M3000 DT 540, at least. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2010-02-05hwmon: (adt7462) Wrong ADT7462_VOLT_COUNTRay Copeland1-1/+1
The #define ADT7462_VOLT_COUNT is wrong, it should be 13 not 12. All the for loops that use this as a limit count are of the typical form, "for (n = 0; n < ADT7462_VOLT_COUNT; n++)", so to loop through all voltages w/o missing the last one it is necessary for the count to be one greater than it is. (Specifically, you will miss the +1.5V 3GPIO input with count = 12 vs. 13.) Signed-off-by: Ray Copeland <ray.copeland@aprius.com> Acked-by: "Darrick J. Wong" <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2010-02-03macintosh/hwmon/ams: Fix device removal sequenceJean Delvare4-4/+12
Some code that is in ams_exit() (the module exit code) should instead be called when the device (not module) is removed. It probably doesn't make much of a difference in the PMU case, but in the I2C case it does matter. I make no guarantee that my fix isn't racy, I'm not familiar enough with the ams driver code to tell for sure. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Christian Kujau <lists@nerdbynature.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stelian Pop <stelian@popies.net> Cc: Michael Hanselmann <linux-kernel@hansmi.ch> Cc: stable@kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-25hwmon: (fschmd) Fix a memleak on multiple opens of /dev/watchdogHans de Goede1-2/+5
When /dev/watchdog gets opened a second time we return -EBUSY, but we already have got a kref then, so we end up leaking our data struct. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2010-01-25hwmon: (asus_atk0110) Do not fail if MBIF is missingLuca Tettamanti1-10/+9
MBIF (motherboard identification) is only used to print the name of the board, it's not essential for the driver; do not fail if it's missing. Based on Juan's patch. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Acked-by: Juan RP <xtraeme@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-01-25hwmon: (amc6821) Double unlock bugDan Carpenter1-1/+0
The mutex gets unlocked after we goto EXIT. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-01-25hwmon: (smsc47m1) Fix section mismatchJeff Mahoney1-1/+1
smsc47m1_restore is called from sm_smsc47m1_exit, which is an __exit function, so it can't be __init. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-01-11Merge branch 'hwmon-for-linus' of ↵Linus Torvalds9-69/+288
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Make PCI device ids constant hwmon: (coretemp) Fix TjMax for Atom N450/D410/D510 CPUs hwmon: (k10temp) Blacklist more family 10h processors hwmon: (asus_atk0110) Add debugfs interface hwmon: (asus_atk0110) Refactor interface probe code hwmon: (adt7462) Fix pin 28 monitoring
2010-01-11hwmon: driver for Texas Instruments amc6821 chipTomaz Mertelj3-0/+1127
Signed-off-by: <tomaz.mertelj@guest.arnes.si> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-10hwmon: Make PCI device ids constantMárton Németh5-5/+5
The id_table field of the struct pci_driver is constant in <linux/pci.h> so it is worth to make pci_device_id also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Márton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-01-10hwmon: (coretemp) Fix TjMax for Atom N450/D410/D510 CPUsYong Wang2-3/+15
The max junction temperature of Atom N450/D410/D510 CPUs is 100 degrees Celsius. Since these CPUs are always coupled with Intel NM10 chipset in one package, the best way to verify whether an Atom CPU is N450/D410/D510 is to check the host bridge device. Signed-off-by: Yong Wang <yong.y.wang@intel.com> Acked-by: Huaxu Wan <huaxu.wan@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-01-10hwmon: (k10temp) Blacklist more family 10h processorsClemens Ladisch1-6/+32
The latest version of the Revision Guide for AMD Family 10h Processors lists two more processor revisions which may be affected by erratum 319. Change the blacklisting code to correctly detect those processors, by implementing AMD's recommended algorithm. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com>
2010-01-10hwmon: (asus_atk0110) Add debugfs interfaceLuca Tettamanti1-0/+191
Expose the raw GGRP/GITM interface via debugfs. The hwmon interface is reverse engineered and the driver tends to break on newer boards... Using this interface it's possible to poke directly at the ACPI methods without the need to recompile, reducing the guesswork and the round trips needed to support a new revision of the interface. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-01-10hwmon: (asus_atk0110) Refactor interface probe codeLuca Tettamanti1-54/+44
The behaviour is unmodified, this makes easier to override the heuristic (which is probably needed for some boards). Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-01-10hwmon: (adt7462) Fix pin 28 monitoringRoger Blofeld1-1/+1
The ADT7462_PIN28_VOLT value is a 4-bit field, so the corresponding shift must be 4. Signed-off-by: Roger Blofeld <blofeldus@yahoo.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-12-17Merge branch 'hwmon-for-linus' of ↵Linus Torvalds7-30/+706
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (w83627hf) Fix for "No such device" hwmon: (sht15) Off-by-one error in array index + incorrect constants hwmon: Add driver for VIA CPU core temperature hwmon: (smsc47m1) Enable device if needed hwmon: (smsc47m1) Fail module loading on error hwmon: (smsc47m1) Only request I/O ports we really use hwmon: New driver for AMD Family 10h/11h CPUs
2009-12-17hwmon: I2C bus support for lis3lv02d and variant accelerometer chipsSamu Onkalo3-0/+201
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Éric Piel <eric.piel@tremplin-utc.net> Cc: Kalhan Trisal <kalhan.trisal@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16hwmon: (w83627hf) Fix for "No such device"Christian Schulte1-1/+1
The commit b72656dbc491484765776a16eeb55ef2e90efea6 introduced a bug leading to the w83627hf_find function no longer finding any chips. Signed-off-by: Christian Schulte <cs@schulte.it> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-12-16hwmon: (sht15) Off-by-one error in array index + incorrect constantsJonathan Cameron1-3/+3
Fix an off-by-one error in array index + incorrect constants. Signed-off-by: Christoph Walser <walser@tik.ee.ethz.ch> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-12-16hwmon: Add driver for VIA CPU core temperatureHarald Welte3-0/+365
This is a driver for the on-die digital temperature sensor of VIA's recent CPU models. [JD: Misc clean-ups.] Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Cc: Juerg Haefliger <juergh@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Adam Nielsen <a.nielsen@shikadi.net>
2009-12-16hwmon: (smsc47m1) Enable device if neededJean Delvare1-3/+27
If the address is set but the device isn't enabled, attempt to enable it. If it won't work for any reason (resource conflict, no function enabled) the initial state is restored. The initial state is also restored on module unloading. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Sean Fidler <fidlersean@gmail.com>
2009-12-16hwmon: (smsc47m1) Fail module loading on errorJean Delvare1-13/+11
If an error occurs during probing, there's no point in keeping the module in memory. Better fail the module loading early to make the problem more visible. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Sean Fidler <fidlersean@gmail.com>
2009-12-16hwmon: (smsc47m1) Only request I/O ports we really useJean Delvare1-10/+89
The I/O area of the SMSC LPC47M1xx chips which we use, gives access to a lot of registers, some of which are related to fan speed monitoring and control, but many are not. At the moment, the smsc47m1 driver requests the whole I/O port range. This could easily result in resource conflicts with either ACPI or other drivers. Request only the I/O ports we really use, to prevent such conflicts. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Sean Fidler <fidlersean@gmail.com>
2009-12-16hwmon: New driver for AMD Family 10h/11h CPUsClemens Ladisch3-0/+210
This adds a driver for the internal temperature sensor of AMD Family 10h and 11h CPUs. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 05:46:33 +0000