Age | Commit message (Collapse) | Author | Files | Lines |
|
The latest version of the On-Chip Controller (OCC) has a different
format for the temperature sensor data. Add a new temperature sensor
version to handle this data.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201120010315.190737-4-joel@jms.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Many hwmon drivers don't use the id information provided by the old
i2c probe function, and the remainder can easily be adapted to the new
form ("probe_new") by calling i2c_match_id explicitly.
This avoids scanning the identifier tables during probes.
Drivers which didn't use the id are converted as-is; drivers which did
are modified as follows:
* if the information in i2c_client is sufficient, that's used instead
(client->name);
* anything else is handled by calling i2c_match_id() with the same
level of error-handling (if any) as before.
A few drivers aren't included in this patch because they have a
different set of maintainers. They will be covered by other patches.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200813160222.1503401-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
The code in occ_get_powr_avg() invokes div64_u64() without checking the
divisor. In case the divisor is zero, kernel gets an "Division by zero
in kernel" error.
Check the divisor and make it return 0 if the divisor is 0.
Fixes: c10e753d43eb ("hwmon (occ): Add sensor types and versions")
Signed-off-by: Lei YU <mine260309@gmail.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/1562813088-23708-1-git-send-email-mine260309@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the "large" pull request for char and misc and other assorted
smaller driver subsystems for 5.3-rc1.
It seems that this tree is becoming the funnel point of lots of
smaller driver subsystems, which is fine for me, but that's why it is
getting larger over time and does not just contain stuff under
drivers/char/ and drivers/misc.
Lots of small updates all over the place here from different driver
subsystems:
- habana driver updates
- coresight driver updates
- documentation file movements and updates
- Android binder fixes and updates
- extcon driver updates
- google firmware driver updates
- fsi driver updates
- smaller misc and char driver updates
- soundwire driver updates
- nvmem driver updates
- w1 driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (188 commits)
coresight: Do not default to CPU0 for missing CPU phandle
dt-bindings: coresight: Change CPU phandle to required property
ocxl: Allow contexts to be attached with a NULL mm
fsi: sbefifo: Don't fail operations when in SBE IPL state
coresight: tmc: Smatch: Fix potential NULL pointer dereference
coresight: etm3x: Smatch: Fix potential NULL pointer dereference
coresight: Potential uninitialized variable in probe()
coresight: etb10: Do not call smp_processor_id from preemptible
coresight: tmc-etf: Do not call smp_processor_id from preemptible
coresight: tmc-etr: alloc_perf_buf: Do not call smp_processor_id from preemptible
coresight: tmc-etr: Do not call smp_processor_id() from preemptible
docs: misc-devices: convert files without extension to ReST
fpga: dfl: fme: align PR buffer size per PR datawidth
fpga: dfl: fme: remove copy_to_user() in ioctl for PR
fpga: dfl-fme-mgr: fix FME_PR_INTFC_ID register address.
intel_th: msu: Start read iterator from a non-empty window
intel_th: msu: Split sgt array and pointer in multiwindow mode
intel_th: msu: Support multipage blocks
intel_th: pci: Add Ice Lake NNPI support
intel_th: msu: Fix single mode with disabled IOMMU
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next
Joel writes:
FSI changes for 5.3
- Add MAINTAINERS entry. There is now a git tree and a mailing
list/patchwork for collecting FSI patches
- Bug fix for error driver registration error paths
- Correction for the OCC hwmon driver to meet the spec
* tag 'fsi-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi:
fsi/core: Fix error paths on CFAM init
OCC: FSI and hwmon: Add sequence numbering
MAINTAINERS: Add FSI subsystem
|
|
Sequence numbering of the commands submitted to the OCC is required by
the OCC interface specification. Add sequence numbering and check for
the correct sequence number on the response.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The occ driver supports two formats for the temp sensor value.
The OCC firmware for P8 supports only the first format, for which
no range checking or error processing is performed in the driver.
Inspecting the OCC sources for P8 reveals that OCC may send
a special value 0xFFFF to indicate that a sensor read timeout
has occurred, see
https://github.com/open-power/occ/blob/master_p8/src/occ/cmdh/cmdh_fsp_cmds.c#L395
That situation wasn't handled in the driver. This patch adds invalid
temp value check for the sensor data format 1 and handles it the same
way as it is done for the format 2, where EREMOTEIO is reported for
this case.
Signed-off-by: Alexander Soldatov <a.soldatov@yadro.com>
Signed-off-by: Alexander Amelkin <a.amelkin@yadro.com>
Reviewed-by: Alexander Amelkin <a.amelkin@yadro.com>
Cc: Edward A. James <eajames@us.ibm.com>
Cc: Joel Stanley <joel@jms.id.au>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The help text needs to spell out how the driver runs on a BMC, as it
previously seemed to indicate it ran on a POWER processor.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The error sysfs attribute returns the stored error state of the OCC and
doesn't depend on the OCC poll response. Therefore, split the error
attribute into it's own function to avoid failing out of the function if
the poll response fails.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The OCC driver limits the rate of sending poll commands to the OCC. If a
user reads a hwmon entry after a poll response resulted in an error and
is rate-limited, the error is invisible to the user. Fix this by storing
the last error and returning that in the rate-limited case.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
These drivers are for a BMC inside PowerPC servers. The BMC runs on
ARM hardware, so only propose the drivers on this architecture, unless
build-testing.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Eddie James <eajames@linux.ibm.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Instead of duplicating the common code into the 2 (binary) drivers,
move the common code to a separate module. This is cleaner.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Eddie James <eajames@linux.ibm.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The occ's extended status is checked and shown as sysfs attributes. But
the code was incorrectly checking the "status" bits.
Fix it by checking the "ext_status" bits.
Cc: stable@vger.kernel.org
Fixes: df04ced684d4 ("hwmon (occ): Add sysfs attributes for additional OCC data")
Signed-off-by: Lei YU <mine260309@gmail.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In the case of power sensor version 0xA0, the sensor indexing overlapped
with the "caps" power sensors, resulting in probe failure and kernel
warnings. Fix this by specifying the next index for each power sensor
version.
Fixes: 54076cb3b5ff ("hwmon (occ): Add sensor attributes and register ...")
Cc: stable@vger.kernel.org
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Files have inconsistent license information.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Cast get_unaligned_be32(...) to u64 in order to give the compiler
complete information about the proper arithmetic to use and avoid
a potential integer overflow.
Notice that such function call is used in contexts that expect
expressions of type u64 (64 bits, unsigned); and the following
expressions are currently being evaluated using 32-bit
arithmetic:
val = get_unaligned_be32(&power->update_tag) *
occ->powr_sample_time_us;
val = get_unaligned_be32(&power->vdn.update_tag) *
occ->powr_sample_time_us;
Addresses-Coverity-ID: 1442357 ("Unintentional integer overflow")
Addresses-Coverity-ID: 1442476 ("Unintentional integer overflow")
Addresses-Coverity-ID: 1442508 ("Unintentional integer overflow")
Fixes: ff692d80b2e2 ("hwmon (occ): Add sensor types and versions")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The OCC provides a variety of additional information about the state of
the host processor, such as throttling, error conditions, and the number
of OCCs detected in the system. This information is essential to service
processor applications such as fan control and host management.
Therefore, export this data in the form of sysfs attributes attached to
the platform device (to which the hwmon device is also attached).
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Setup the sensor attributes for every OCC sensor found by the first poll
response. Register the attributes with hwmon.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add structures to define all sensor types and versions. Add sysfs show
and store functions for each sensor type. Add a method to construct the
"set user power cap" command and send it to the OCC. Add rate limit to
polling the OCC (in case user-space reads our hwmon entries rapidly).
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add method to parse the response from the OCC poll command. This only
needs to be done during probe(), since the OCC shouldn't change the
number or format of sensors while it's running. The parsed response
allows quick access to sensor data, as well as information on the
number and version of sensors, which we need to instantiate hwmon
attributes.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
For the P8 OCC, add the procedure to send a command to the OCC over I2C
bus. This involves writing the OCC command registers with serial
communication operations (SCOMs) interpreted by the I2C slave. For the
P9 OCC, add a procedure to use the OCC in-kernel API to send a command
to the OCC through the SBE.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The OCC is a device embedded on a POWER processor that collects and
aggregates sensor data from the processor and system. The OCC can
provide the raw sensor data as well as perform thermal and power
management on the system.
This driver provides a hwmon interface to the OCC from a service
processor (e.g. a BMC). The driver supports both POWER8 and POWER9 OCCs.
Communications with the POWER8 OCC are established over standard I2C
bus. The driver communicates with the POWER9 OCC through the FSI-based
OCC driver, which handles the lower-level communication details.
This patch lays out the structure of the OCC hwmon driver. There are two
platform drivers, one each for P8 and P9 OCCs. These are probed through
the I2C tree and the FSI-based OCC driver, respectively. The patch also
defines the first common structures and methods between the two OCC
versions.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
[groeck: Fix up SPDX license identifier]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|