summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/ltc4245.c
AgeCommit message (Collapse)AuthorFilesLines
2014-03-03hwmon: (ltc4245) Remove devicetree conditionalsGuenter Roeck1-4/+0
Devicetree functions are stubbed out if CONFIG_OF is undefined. Therefore, conditional compilation is unnecessary and can be removed. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de>
2014-03-03hwmon: (ltc4245) Drop debug messagesGuenter Roeck1-3/+0
The debug messages in this driver have little if any value. Drop them. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de>
2014-03-03hwmon: (ltc4245) Use device managed function to register hwmon deviceGuenter Roeck1-19/+4
This simplifies the code and reduces code size. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de>
2013-10-13hwmon: (ltc4245) Convert to use hwmon_device_register_with_groupsGuenter Roeck1-54/+24
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07hwmon: (ltc4245) Fix 'Macros with complex values' checkpatch errorGuenter Roeck1-57/+59
Fix: ERROR: Macros with complex values should be enclosed in parenthesis by unwinding the problematic macros. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-10-10hwmon: Add missing inclusions of <linux/jiffies.h>Jean Delvare1-0/+1
Many hwmon drivers use jiffies but omit the inclusion of the header file. Fix that, and also fix one driver which was including the header file but didn't need it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Luca Tettamanti <kronos.it@gmail.com> Cc: Marc Hulsman <m.hulsman@tudelft.nl> Cc: Rudolf Marek <r.marek@assembler.cz>
2012-09-23hwmon: (ltc4245) Convert to use devm_ functionsGuenter Roeck1-10/+4
Convert to use devm_ functions to reduce code size and simplify the code. Cc: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18hwmon: (ltc4245) Fix multi-line commentsGuenter Roeck1-3/+6
Cc: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Ira W. Snyder <iws@ovro.caltech.edu>
2012-03-18hwmon: convert drivers/hwmon/* to use module_i2c_driver()Axel Lin1-12/+1
This patch converts the drivers in drivers/hwmon/* to use the module_i2c_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Corentin Labbe <corentin.labbe@geomatys.fr> Cc: Dirk Eibach <eibach@gdsys.de> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Guillaume Ligneul <guillaume.ligneul@gmail.com> Cc: David George <david.george@ska.ac.za> Cc: "Hans J. Koch" <hjk@hansjkoch.de> Cc: Marc Hulsman <m.hulsman@tudelft.nl> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-08-14hwmon: (ltc4245) Expose all GPIO pins as analog voltagesIra W. Snyder1-10/+167
Add support for exposing all GPIO pins as analog voltages. Though this is not an ideal use of the chip, some hardware engineers may decide that the LTC4245 meets their design requirements when studying the datasheet. The GPIO pins are sampled in round-robin fashion, meaning that a slow reader will see stale data. A userspace application can detect this, because it will get -EAGAIN when reading from a sysfs file which contains stale data. Users can choose to use this feature on a per-chip basis by using either platform data or the OF device tree (where applicable). Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-05-27hwmon: (ltc4245) Read only one GPIO pinIra W. Snyder1-13/+5
Read only one of the GPIO pins as an analog voltage. The ADC can be switched to a different GPIO pin at runtime, but this is not supported. Previously, this driver would report the analog voltage of the currently selected GPIO pin as all three GPIO voltages: in9_input, in10_input and in11_input. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2009-10-04ltc4215/ltc4245: Discard obsolete detect methodsJean Delvare1-126/+5
There is no point in implementing a detect callback for the LTC4215 and LTC4245, as these devices can't be detected. It was there solely to handle "force" module parameters to instantiate devices, but now we have a better sysfs interface that can do the same. So we can get rid of the ugly module parameters and the detect callbacks. This shrinks the binary module sizes by 36% and 46%, respectively. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ira W. Snyder <iws@ovro.caltech.edu>
2009-09-23hwmon: (ltc4245) Clear faults at startupIra W. Snyder1-1/+2
When power is applied to the ltc4245 chip it sometimes reports spurious faults, which are exposed as alarms in the hwmon output. Clear the fault register when the driver is installed to clear the alarms. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-07hwmon: Add LTC4245 driverIra Snyder1-0/+567
Add Linux support for the Linear Technology LTC4245 Multiple Supply Hot Swap controller I2C monitoring interface. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>