summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/lm87.c
AgeCommit message (Collapse)AuthorFilesLines
2020-09-23hwmon: use simple i2c probe function (take 2)Stephen Kitt1-2/+2
Many hwmon drivers don't use the id information provided by the old i2c probe function, and the remainder can easily be adapted to the new form ("probe_new") by calling i2c_match_id explicitly. This avoids scanning the identifier tables during probes. Drivers which didn't use the id are converted as-is; drivers which did are modified to call i2c_match_id() with the same level of error-handling (if any) as before. This patch wraps up the transition for hwmon, with four stragglers not included in the previous large patch. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200821160354.594715-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24hwmon: Replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719175512.60745-1-grandmaster@al2klimov.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-15hwmon: (lm87) Use permission specific SENSOR[_DEVICE]_ATTR variantsGuenter Roeck1-78/+87
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readbility, and to reduce the chance of inconsistencies. Also replace any remaining S_<PERMS> in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-13hwmon: (lm87) Add OF device ID tableJavier Martinez Canillas1-0/+8
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-13hwmon: (lm87) Remove unused I2C devices driver_dataJavier Martinez Canillas1-4/+2
The I2C device ID entries set a .driver_data but this data is never looked up by the driver. So don't set it and also remove the enum. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02hwmon: (lm87) Allow channel data to be set from dts fileMahoda Ratnayaka1-2/+21
Currently there is no method for setting the channel value from the DTS file. When, the driver uses a dts file to initialize the driver platform_data is not set. As a result channel variable may not be set correctly. Without the channel variable set correctly, some of the sensors will not be initialized correctly. For example temp3 sensor sysfs entries. This implements the schema agreed with the device tree binding document. Signed-off-by: Mahoda Ratnayaka <mahoda.ratnayaka@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-01-02hwmon: (lm87) use permission-specific DEVICE_ATTR variantsJulia Lawall1-21/+22
Use DEVICE_ATTR_RO for read only attributes and DEVICE_ATTR_RW for read/write attributes. This simplifies the source code, improves readbility, and reduces the chance of inconsistencies. The conversion was done automatically using coccinelle. It was validated by compiling both the old and the new source code and comparing its text, data, and bss size. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> [groeck: Updated description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-12-12hwmon: (lm87) Fix overflow seen when writing voltage limit attributesGuenter Roeck1-1/+1
Writes into voltage limit attributes can overflow due to an unbound multiplication. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-12-02hwmon: (lm87) Use hwmon to create the sysfs groupsJason Gunthorpe1-84/+50
This is the expected thing for a hwmon driver to do, this changes the sysfs paths from, say: /sys/bus/i2c/devices/0-002c/temp1_input to: /sys/bus/i2c/devices/0-002c/hwmon/hwmon0/temp1_input Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-05hwmon: (lm87) Fix vrm write operationAxel Lin1-0/+4
vrm is an u8, so the written value needs to be limited to [0, 255]. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-04-04hwmon: Avoid initializing the same field twiceJean Delvare1-1/+0
All hwmon drivers allocate their data structure with some form of kzalloc, so setting data fields to zero explicitly is a waste of time. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2014-01-29Update Jean Delvare's e-mail addressJean Delvare1-2/+2
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2013-08-11hwmon: use dev_get_platdata()Jingoo Han1-2/+2
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-21hwmon: (lm87) Convert to use devm_ functionsGuenter Roeck1-10/+5
Convert to use devm_ functions to reduce code size and simplify the code. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-18hwmon: (lm87) Get rid of macro-generated functionsJean Delvare1-193/+164
Use SENSORS_DEVICE_ATTR instead of DEVICE_ATTR for most attributes, so that the attribute number can be retrieved and it is no longer necessary to generate functions using macros. This shaves about 2 kB on the binary module size. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-18hwmon: (lm87) Reorganize the codeJean Delvare1-186/+165
Reorder functions and driver declaration to no longer need to forward-declare functions. Also rename new_client to just client everywhere for readability. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-18hwmon: (lm87) Fix: do not use assignment in if conditionGuenter Roeck1-72/+82
Fix checkpatch issue: ERROR: do not use assignment in if condition Replace repeated calls to device_create_file() with calls to sysfs_create_group. Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-18hwmon: (lm87) Fix checkpatch issuesGuenter Roeck1-83/+174
Fixed: ERROR: do not use assignment in if condition ERROR: space required after that close brace '}' ERROR: space required after that ',' (ctx:VxV) ERROR: spaces required around that '<' (ctx:VxV) ERROR: trailing statements should be on next line WARNING: line over 80 characters WARNING: simple_strtol is obsolete, use kstrtol instead WARNING: simple_strtoul is obsolete, use kstrtoul instead Modify multi-line comments to follow Documentation/CodingStyle. Not fixed everywhere (code complexity): ERROR: do not use assignment in if condition As a side effect of the changes made, attribute set functions now return an error if an attempt is made to write non-numeric values. Previously, such writes were interpreted as writing 0. Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-18hwmon: convert drivers/hwmon/* to use module_i2c_driver()Axel Lin1-12/+1
This patch converts the drivers in drivers/hwmon/* to use the module_i2c_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Corentin Labbe <corentin.labbe@geomatys.fr> Cc: Dirk Eibach <eibach@gdsys.de> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Guillaume Ligneul <guillaume.ligneul@gmail.com> Cc: David George <david.george@ska.ac.za> Cc: "Hans J. Koch" <hjk@hansjkoch.de> Cc: Marc Hulsman <m.hulsman@tudelft.nl> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2009-12-14i2c: Drop I2C_CLIENT_INSMOD_2 to 8Jean Delvare1-5/+1
These macros simply declare an enum, so drivers might as well declare it themselves. This puts an end to the arbitrary limit of 8 chip types per i2c driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
2009-12-14i2c: Get rid of struct i2c_client_address_dataJean Delvare1-1/+1
Struct i2c_client_address_data only contains one field at this point, which makes its usefulness questionable. Get rid of it and pass simple address lists around instead. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
2009-12-14i2c: Drop the kind parameter from detect callbacksJean Delvare1-2/+2
The "kind" parameter always has value -1, and nobody is using it any longer, so we can remove it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de>
2009-12-09hwmon: Clean up detect functionsJean Delvare1-23/+18
As kind is now hard-coded to -1, there is room for code clean-ups. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Corentin Labbe <corentin.labbe@geomatys.fr> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Riku Voipio <riku.voipio@iki.fi> Acked-by: "Hans J. Koch" <hjk@linutronix.de> Cc: Rudolf Marek <r.marek@assembler.cz>
2008-10-17hwmon: (lm87) Add support for configuration through platform_dataBen Hutchings1-6/+11
The lm87 driver normally assumes that firmware configured the chip correctly. Since this is not always the case, alllow platform code to set the channel register value via platform_data. All other configuration registers can be changed after driver initialisation. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (lm87) Restore original configuration register on removalBen Hutchings1-5/+7
This means that if we have to start the monitor when probed, we also stop it on removal. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-17hwmon: (lm87) Fix masking of config register in lm87_init_client()Ben Hutchings1-4/+4
lm87_init_client() conditionally sets the Start bit and clears the INT#_Clear bit in the Config 1 register. The condition should be that either of these bits needs changing, but currently it checks the (self-clearing) Initialization bit instead of INT#_Clear. Fix the condition and also ensure we never set the Initialization bit. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-16hwmon: (lm87) Convert to a new-style i2c driverJean Delvare1-53/+46
The new-style lm87 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ben Hutchings <bhutchings@solarflare.com>
2008-02-18hwmon: normal_i2c arrays should be constMark M. Hoffman1-1/+1
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07hwmon: VRM is not written to registersJean Delvare1-2/+1
What was true of reading the VRM value is also true of writing it: not being a register value, it doesn't need hardware access, so we don't need a reference to the i2c client. This allows for a minor code cleanup. As gcc appears to be smart enough to simplify the generated code by itself, this cleanup only affects the source code, the generated binaries are unchanged. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07hwmon: Discard useless I2C driver IDsJean Delvare1-1/+0
Many I2C hwmon drivers define a driver ID but no other code references these, meaning that they are useless. Discard them, along with a few IDs which are defined but never used at all. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-02-07hwmon: (lm87) Add support for the Analog Devices ADM1024Jean Delvare1-6/+19
It happens that the Analog Devices ADM1024 is fully compatible with the National Semiconductor LM87, so support for the former can easily be added to the lm87 driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-10-09hwmon: (lm87) Disable VID when it should beJean Delvare1-1/+1
A stupid bit shifting bug caused the VID value to be always exported even when the hardware is configured for something different. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-10-09hwmon: VRM is not read from registersJean Delvare1-1/+1
The VRM value is not read from chip registers, so there's no need to update the device data cache before exporting the VRM value to user-space. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-10-09hwmon: (lm87) Add individual alarm filesJean Delvare1-6/+61
Add individual alarm files to the lm87 driver. The new libsensors needs this. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-10-09hwmon: (lm87) Fix a division by zeroJean Delvare1-1/+1
Missing parentheses in the definition of FAN_FROM_REG cause a division by zero for a specific register value. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-10-09hwmon: Convert from class_device to deviceTony Jones1-5/+5
Convert from class_device to device for hwmon_device_register/unregister Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-05-08hwmon: Only call vid_which_vrm() when neededJean Delvare1-1/+1
Some hardware monitoring drivers create the VID/VRM interface files conditionally depending on the chip model or configuration. We should only call vid_which_vrm() when we are actually going to create the files. Not only it is more logical and efficient that way, but it also prevents printing unnecessary warnings such as the one reported here: http://lists.lm-sensors.org/pipermail/lm-sensors/2007-February/018954.html Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-09-28hwmon: Fix unchecked return status, batch 2Mark M. Hoffman1-52/+139
hwmon: Fix unchecked return status, batch 2 Fix up some hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26spelling fixesAndreas Mohr1-1/+1
acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-23[PATCH] hwmon: Semaphore to mutex conversionsIngo Molnar1-19/+20
convert drivers/hwmon/*.c semaphore use to mutexes. the conversion was generated via scripts, and the result was validated automatically via a script as well. all affected hwmon drivers were build-tested. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-05[PATCH] I2C: Remove .owner setting from i2c_driver as it's no longer neededGreg Kroah-Hartman1-1/+0
Now that i2c_add_driver() doesn't need the module owner to be set by hand, we can delete it from the drivers. This patch catches all of the drivers that I found in the current tree (if a driver sets the .owner by hand, it's not a problem, just not needed.) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Jean Delvare <khali@linux-fr.org>
2006-01-05[PATCH] i2c: Drop i2c_driver.{owner,name}, 3 of 11Laurent Riffard1-2/+4
We should use the i2c_driver.driver's .name and .owner fields instead of the i2c_driver's ones. This patch updates the hwmon drivers. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-05[PATCH] i2c: Drop i2c_driver.flags, 2 of 3Jean Delvare1-1/+0
Just about every i2c chip driver sets the I2C_DF_NOTIFY flag, so we can simply make it the default and drop the flag. If any driver really doesn't want to be notified when i2c adapters are added, that driver can simply omit to set .attach_adapter. This approach is also more robust as it prevents accidental NULL pointer dereferences. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] hwmon: kzalloc conversionDeepak Saxena1-2/+1
Use kzalloc instead of kmalloc+memset in all hardware monitoring drivers. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] hwmon: hwmon vs i2c, second round (07/11)Jean Delvare1-2/+2
The only part left in i2c-sensor is the VRM/VRD/VID handling code. This is in no way related to i2c, so it doesn't belong there. Move the code to hwmon, where it belongs. Note that not all hardware monitoring drivers do VRM/VRD/VID operations, so less drivers depend on hwmon-vid than there were depending on i2c-sensor. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] hwmon: hwmon vs i2c, second round (06/11)Jean Delvare1-2/+1
The only thing left in i2c-sensor.h are module parameter definition macros. It's only an extension of what i2c.h offers, and this extension is not sensors-specific. As a matter of fact, a few non-sensors drivers use them. So we better merge them in i2c.h, and get rid of i2c-sensor.h altogether. Signed-off-by: Jean Delvare <khali@linux-fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] hwmon: hwmon vs i2c, second round (04/11)Jean Delvare1-1/+1
i2c_probe and i2c_detect now do the exact same thing and operate on the same data structure, so we can have everyone call i2c_probe. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] I2C: refactor message in i2c_detach_clientJean Delvare1-4/+1
We could refactor the error message 34 different i2c drivers print if i2c_detach_client() fails in this function itself. Saves quite a few lines of code. Documentation is updated to reflect that change. Note that this patch should be applied after Rudolf Marek's w83792d patches. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] I2C: Separate non-i2c hwmon drivers from i2c-core (7/9)Jean Delvare1-1/+0
Kill normal_isa in header files, documentation and all chip drivers, as it is no more used. normal_i2c could be renamed to normal, but I decided not to do so at the moment, so as to limit the number of changes. This might be done later as part of the i2c_probe/i2c_detect merge. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 08:12:17 +0000