summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/it87.c
AgeCommit message (Collapse)AuthorFilesLines
2015-03-09hwmon: (it87) Add support for IT8786EThomas Lorblanches1-6/+16
IT8786E is mostly compatible with IT8771 / IT8772. Parameters determined by testing various combinations. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Thomas Lorblanches <zlika_ese@hotmail.com> [Guenter Roeck: merged from github, addressed review comments] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09hwmon: (it87) Add feature flag for VID supportGuenter Roeck1-20/+11
Newer chips don't typically support VID inputs or control. Add a feature flag for VID support to simplify adding support for new chips. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09hwmon: (it87) Add feature flags for fans count and 16-bit fan configurationGuenter Roeck1-33/+36
Fans 4-5 are not supported on all chips and revisions. Also, 16-bit fan counters are always enabled on some chips. Provide feature flags to simplify adding support for new chips. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09hwmon: (it87) Don't configure 16 bit fan counters it not necessaryGuenter Roeck1-3/+6
On IT8728F, IT8771E, and IT8772E, fans counters are always 16 bit and don't need to be configured for it. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09hwmon: (it87) Add support for IT8781FGuenter Roeck1-8/+24
IT8781F is mostly compatible to IT8782F. Major difference is that it only supports four instead of six UART channels, and therefore does not share the uart6 pins. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-10-20hwmon: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-04-04hwmon: (it87) Add support for IT8623ERudolf Marek1-0/+3
Add support for the IT8623E found on Asus motherboards. It has same hardware monitoring block as IT8603E. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2014-04-04hwmon: (it87) Fix IT8603E define nameRudolf Marek1-3/+3
Fix small typo in the define name for IT8603E. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2014-01-29Update Jean Delvare's e-mail addressJean Delvare1-2/+2
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2014-01-29hwmon: (it87) Print proper names for the IT8771E and IT8772EJean Delvare1-0/+1
The driver prints IT8771F and IT8772F instead of IT8771E and IT8772E respectively when the driver is loaded. This is a cosmetic only bug but let's fix it. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2014-01-29hwmon: (it87) Add support for the ITE IT8603ERudolf Marek1-18/+85
Add support for IT8603E. This closes bug #57861: https://bugzilla.kernel.org/show_bug.cgi?id=57861 [JD: Fixes and clean-ups.] Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2013-08-11hwmon: use dev_get_platdata()Jingoo Han1-3/+3
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07hwmon: Fix CamelCase checkpatch warningsGuenter Roeck1-12/+12
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (it87) Add support for IT8771E and IT8772EGuenter Roeck1-4/+35
Assume that IT8771E and IT8772E are fully compatible with IT8728F. IT8771E support contributed by Kelly Anderson. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <khali@linux-fr.org>
2013-01-25hwmon: Replace SENSORS_LIMIT with clamp_valGuenter Roeck1-7/+6
SENSORS_LIMIT and the generic clamp_val have the same functionality, and clamp_val is more efficient. This patch reduces text size by 9052 bytes and bss size by 11624 bytes for x86_64 builds. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: George Joseph <george.joseph@fairview5.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (it87) Support PECI for additional chipsGuenter Roeck1-10/+38
Extend support for reporting and selecting PECI temperature sensors to IT8718, IT8720, IT8782, and IT8783. For IT8721, report the sensor type for temp2 as Intel PECI (6) if the chip is configured to report the PCH temperature. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (it87) Report thermal sensor type as Intel PECI if appropriateGuenter Roeck1-3/+17
IT8721 and IT8728 support Intel PECI temperature reporting. Each sensor can be programmed to display the temperature reported on the PECI interface. If configured for Intel PECI, the driver reported the wrong sensor type for the respective thermal sensor. Fix the code to correctly report it as "Intel PECI (6)". Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (it87) Manage device specific features with tableGuenter Roeck1-74/+81
This simplifies the code, improves runtime performance, reduces code size (about 280 bytes on x86_64), and makes it easier to add support for new devices. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (it87) Replace pwm group macro with direct attribute definitionsGuenter Roeck1-41/+74
Fix checkpatch error: ERROR: Macros with multiple statements should be enclosed in a do - while loop Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (it87) Avoid quoted string splits across linesGuenter Roeck1-14/+13
Fix the respective checkpatch warnings. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (it87) Save fan registers in 2-dimensional arrayGuenter Roeck1-159/+104
Also unify fan functions to use the same code for 8 and 16 bit fans. This patch reduces code size by approximately 1,200 bytes on x86_64. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (it87) Introduce support for tempX_offset sysfs attributeGuenter Roeck1-5/+61
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (it87) Replace macro defining tempX_type sensors with direct definitionsGuenter Roeck1-10/+11
The macro name show_sensor_offset is confusing since it related to the sensor type, not an offset - even more so when we introduce offset attributes later on. Replace it with direct definitions, and replace the show_sensor/set_sensor function names with show_temp_type/set_temp_type. This also resolves a checkpatch error. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (it87) Save voltage register values in 2-dimensional arrayGuenter Roeck1-81/+66
Reduces code size (more than 600 bytes on x86_64), and gets rid of some checkpatch errors. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (it87) Save temperature registers in 2-dimensional arrayGuenter Roeck1-63/+35
Cleaner code, fewer checkpatch errors, and reduced code size (saves more than 500 bytes on x86-64). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-11-28hwmon: remove use of __devexitBill Pemberton1-2/+2
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Jim Cromie <jim.cromie@gmail.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28hwmon: remove use of __devinitBill Pemberton1-3/+3
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Jim Cromie <jim.cromie@gmail.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28hwmon: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Jim Cromie <jim.cromie@gmail.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-12hwmon: (it87) Preserve configuration register bits on initJean Delvare1-1/+1
We were accidentally losing one bit in the configuration register on device initialization. It was reported to freeze one specific system right away. Properly preserve all bits we don't explicitly want to change in order to prevent that. Reported-by: Stevie Trujillo <stevie.trujillo@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2012-05-22hwmon: (it87) Make temp3 attribute conditional for IT8782FGuenter Roeck1-20/+61
On IT8782F, temp3 is only supported if UART6 is disabled. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-05-22hwmon: (it87) Convert to use devm_kzalloc and devm_request_regionGuenter Roeck1-34/+20
This makes the code a bit simpler and smaller. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-05-20hwmon: (it87) Create voltage attributes only if voltage is enabledGuenter Roeck1-38/+124
On IT8782F and IT8783F, some voltage input pins may be disabled. Don't create sysfs attribute files if that is the case. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-05-20hwmon: (it87) Add support for IT8782F and IT8783E/FGuenter Roeck1-26/+99
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-18hwmon: (it87) Constify fixed string arraysGuenter Roeck1-3/+3
Make checkpatch happy by constifying fixed string arrays. Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-18hwmon: (it87) Fix multi-line commentsGuenter Roeck1-62/+108
Fix multi-line comments, and clean up some of the affected comments. Cc: Jean Delvare <khali@linux-fr.org> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-01-16hwmon: (it87) Add IT8728F supportJean Delvare1-15/+46
Until we get a datasheet for the IT8728F, treat it as fully compatible with the IT8721F, as it seems to work reasonably well. This closes kernel bug #27262. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell1-2/+2
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-05hwmon: replaced strict_str* with kstr*Frans Meulenbroeks1-17/+17
replaced strict_strtol with kstrtol and replaced strict_strtuol with kstrtuol This satisfies checkpatch -f Compile tested only: no warnings or errors given Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-25hwmon: (it87) Add chassis intrusion detection supportJean Delvare1-0/+29
Add chassis intrusion detection support for all supported devices, using the standard interface. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-17hwmon: (it87) Fix label group removalJean Delvare1-1/+1
A copy-and-paste error caused it87_attributes_vid to be referenced where it87_attributes_label should be. Thankfully the group is only used for attribute removal, not attribute creation, so the effects of this bug are limited, but let's fix it still. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25hwmon: (it87) Use request_muxed_regionNat Gurumoorthy1-12/+19
Serialize access to the hardware by using "request_muxed_region" macro defined by Alan Cox. Call to this macro will hold off the requestor if the resource is currently busy. "superio_enter" will return an error if call to "request_muxed_region" fails. Rest of the code change is to ripple an error return from superio_enter to the top level. Signed-off-by: Nat Gurumoorthy <natg@google.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12hwmon: (it87) Use pr_fmt and pr_<level>Joe Perches1-16/+14
Added #define pr_fmt KBUILD_MODNAME ": " fmt Converted printks to pr_<level> Coalesced any long formats Removed prefixes from formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-12-08hwmon: (it87) Fix manual fan speed control on IT8721FJean Delvare1-16/+45
The manual fan speed control logic of the IT8721F is much different from what older devices had. Update the code to properly support that. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28hwmon: (it87) Add support for the IT8721F/IT8758EJean Delvare1-22/+94
Add support for the IT8721F/IT8758E. These new chips differ from the older IT87xxF chips in the following ways: * ADC LSB is 12 mV instead of 16 mV. * PWM values are 8-bit instead of 7-bit. There are other minor changes we don't have to care about in the driver. Another change is that we will handle internal voltage scaling in the driver instead of delegating the work to user-space. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28hwmon: (it87) Move conversion functionsJean Delvare1-50/+52
Move conversion functions until after structure defintions. This is needed for future changes which make use of the structures in the conversion funtcions. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-08-14hwmon: (it87) Export labels for internal sensorsJean Delvare1-2/+44
Some voltage sensors can be wired internally to the IT87xxF chip's own power supply channels. In that case, we can inform user-space that the wiring is known by exporting proper labels for these sensors. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-07-09hwmon: (it87) Fix in7 on IT8720FJean Delvare1-0/+22
The IT8720F has no VIN7 pin, so VCCH should always be routed internally to VIN7 with an internal divider. Curiously, there still is a configuration bit to control this, which means it can be set incorrectly. And even more curiously, many boards out there are improperly configured, even though the IT8720F datasheet claims that the internal routing of VCCH to VIN7 is the default setting. So we force the internal routing in this case. It turns out that all boards with the wrong setting are from Gigabyte, so I suspect a BIOS bug. But it's easy enough to workaround in the driver, so let's do it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jean-Marc Spaggiari <jean-marc@spaggiari.org> Cc: stable@kernel.org
2010-04-14hwmon: (it87) Invalidate cache on temperature sensor changeJean Delvare1-0/+1
When any temperature sensor type is changed, the corresponding temperature value needs to be updated. The register caching mechanism may delay this update, so we want to invalidate the cache to force an immediate update. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-04-14hwmon: (it87) Properly handle wrong sensor type requestsJean Delvare1-10/+10
Currently, if someone tries to set the thermal sensor type to an unsupported value, subsequent accesses to the chip may temporarily show the sensor in question as disabled. Use a temporary variable and only update the cached value on success, to prevent such confusion. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-04-14hwmon: (it87) Don't arbitrarily enable temperature channelsJean Delvare1-8/+5
Temperature channels can be used in 2 different modes (thermistor and thermal diode) and we don't know which one, if any, is correct for every given board. So don't arbitrarily choose one. Instead, leave the temperature channels untouched. They can be configured from user-space if needed anyway. Signed-off-by: Jean Delvare <khali@linux-fr.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 22:34:14 +0000