summaryrefslogtreecommitdiffstats
path: root/drivers/hid
AgeCommit message (Collapse)AuthorFilesLines
2019-05-18treewide: prefix header search paths with $(srctree)/Masahiro Yamada1-1/+1
Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-13Merge branch 'for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A few new drivers: - driver for Azoteq IQS550/572/525 touch controllers - driver for Microchip AT42QT1050 keys - driver for GPIO controllable vibrators - support for GT5663 in Goodix driver ... along with miscellaneous driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: libps2 - mark expected switch fall-through Input: qt1050 - add Microchip AT42QT1050 support Input: add support for Azoteq IQS550/572/525 Input: add a driver for GPIO controllable vibrators Input: synaptics-rmi4 - fix enum_fmt Input: synaptics-rmi4 - fill initial format HID: input: add mapping for KEY_KBD_LAYOUT_NEXT Input: add KEY_KBD_LAYOUT_NEXT Input: hyperv-keyboard - add module description Input: olpc_apsp - depend on ARCH_MMP Input: sun4i-a10-lradc-keys - add support for A83T Input: snvs_pwrkey - use dev_pm_set_wake_irq() to simplify code Input: lpc32xx-key - add clocks property and fix DT binding example Input: i8042 - signal wakeup from atkbd/psmouse Input: goodix - add GT5663 CTP support Input: goodix - add regulators suppot Input: evdev - use struct_size() in kzalloc() and vzalloc() Input: edt-ft5x06 - convert to use SPDX identifier Input: edt-ft5x06 - enable ACPI enumeration
2019-05-10Merge branch 'next' into for-linusDmitry Torokhov1-0/+2
Prepare input updates for 5.2 merge window.
2019-05-07Merge tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linuxLinus Torvalds1-1/+1
Pull stream_open conversion from Kirill Smelkov: - remove unnecessary double nonseekable_open from drivers/char/dtlk.c as noticed by Pavel Machek while reviewing nonseekable_open -> stream_open mass conversion. - the mass conversion patch promised in commit 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock") and is automatically generated by running $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. More details on this in the patch. - finally, change VFS to pass ppos=NULL into .read/.write for files that declare themselves streams. It was suggested by Rasmus Villemoes and makes sure that if ppos starts to be erroneously used in a stream file, such bug won't go unnoticed and will produce an oops instead of creating illusion of position change being taken into account. Note: this patch does not conflict with "fuse: Add FOPEN_STREAM to use stream_open()" that will be hopefully coming via FUSE tree, because fs/fuse/ uses new-style .read_iter/.write_iter, and for these accessors position is still passed as non-pointer kiocb.ki_pos . * tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linux: vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files *: convert stream-like files from nonseekable_open -> stream_open dtlk: remove double call to nonseekable_open
2019-05-07Merge branch 'for-linus' of ↵Linus Torvalds27-689/+3403
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - support for U2F Zero device, from Andrej Shadura - logitech-dj has historically been treating devices behind non-unifying receivers as generic devices, using the HID emulation in the receiver. That had several shortcomings (special keys handling, battery level monitoring, etc). The driver has been reworked to enumarate (and directly communicate with) the devices behind the receiver, to avoid the (too) generic HID implementation in the receiver itself. All the work done by Benjamin Tissoires and Hans de Goede. - restructuring of intel-ish driver in order to allow for multiple clients of the ISH implementation, from Srinivas Pandruvada - several other smaller fixes and assorted device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (68 commits) HID: logitech-dj: fix spelling in printk HID: input: fix assignment of .value HID: input: make sure the wheel high resolution multiplier is set HID: logitech-dj: add usbhid dependency in Kconfig HID: logitech-hidpp: add support for HID++ 1.0 consumer keys reports HID: logitech-hidpp: add support for HID++ 1.0 extra mouse buttons reports HID: logitech-hidpp: add support for HID++ 1.0 wheel reports HID: logitech-hidpp: make hidpp10_set_register_bit a bit more generic HID: logitech-hidpp: add input_device ptr to struct hidpp_device HID: logitech-hidpp: do not hardcode very long report length HID: logitech-hidpp: handle devices attached to 27MHz wireless receivers HID: logitech-hidpp: use RAP instead of FAP to get the protocol version HID: logitech-hidpp: remove unused origin_is_hid_core function parameter HID: logitech-hidpp: remove double assignment from __hidpp_send_report HID: logitech-hidpp: do not make failure to get the name fatal HID: logitech-hidpp: ignore very-short or empty names HID: logitech-hidpp: make .probe usbhid capable HID: logitech-hidpp: allow non HID++ devices to be handled by this module HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver HID: logitech-dj: make appending of the HID++ descriptors conditional ...
2019-05-06*: convert stream-like files from nonseekable_open -> stream_openKirill Smelkov1-1/+1
Using scripts/coccinelle/api/stream_open.cocci added in 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock"), search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Among cases converted 14 were potentially vulnerable to read vs write deadlock (see details in 10dce8af3422): drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/infiniband/core/user_mad.c:988:1-17: ERROR: umad_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/misc/uinput.c:401:1-17: ERROR: uinput_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. and the rest were just safe to convert to stream_open because their read and write do not use ppos at all and corresponding file_operations do not have methods that assume @offset file access(*): arch/powerpc/platforms/52xx/mpc52xx_gpt.c:631:8-24: WARNING: mpc52xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/um/drivers/harddog_kern.c:88:8-24: WARNING: harddog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/x86/kernel/cpu/microcode/core.c:430:33-49: WARNING: microcode_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ds1620.c:215:8-24: WARNING: ds1620_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/dtlk.c:301:1-17: WARNING: dtlk_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ipmi/ipmi_watchdog.c:840:9-25: WARNING: ipmi_wdog_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/pcmcia/scr24x_cs.c:95:8-24: WARNING: scr24x_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/tb0219.c:246:9-25: WARNING: tb0219_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/firewire/nosy.c:306:8-24: WARNING: nosy_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/fschmd.c:840:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/w83793.c:1344:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucma.c:1747:8-24: WARNING: ucma_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucm.c:1178:8-24: WARNING: ucm_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/uverbs_main.c:1086:8-24: WARNING: uverbs_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/input/joydev.c:282:1-17: WARNING: joydev_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/pci/switch/switchtec.c:393:1-17: WARNING: switchtec_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/platform/chrome/cros_ec_debugfs.c:135:8-24: WARNING: cros_ec_console_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-ds1374.c:470:9-25: WARNING: ds1374_wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-m41t80.c:805:9-25: WARNING: wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/tape_char.c:293:2-18: WARNING: tape_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/zcore.c:194:8-24: WARNING: zcore_reipl_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/crypto/zcrypt_api.c:528:8-24: WARNING: zcrypt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/spi/spidev.c:594:1-17: WARNING: spidev_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/staging/pi433/pi433_if.c:974:1-17: WARNING: pi433_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/acquirewdt.c:203:8-24: WARNING: acq_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/advantechwdt.c:202:8-24: WARNING: advwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim1535_wdt.c:252:8-24: WARNING: ali_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim7101_wdt.c:217:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ar7_wdt.c:166:8-24: WARNING: ar7_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/at91rm9200_wdt.c:113:8-24: WARNING: at91wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ath79_wdt.c:135:8-24: WARNING: ath79_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/bcm63xx_wdt.c:119:8-24: WARNING: bcm63xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpu5wdt.c:143:8-24: WARNING: cpu5wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpwd.c:397:8-24: WARNING: cpwd_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/eurotechwdt.c:319:8-24: WARNING: eurwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/f71808e_wdt.c:528:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/gef_wdt.c:232:8-24: WARNING: gef_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/geodewdt.c:95:8-24: WARNING: geodewdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ib700wdt.c:241:8-24: WARNING: ibwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ibmasr.c:326:8-24: WARNING: asr_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/indydog.c:80:8-24: WARNING: indydog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/intel_scu_watchdog.c:307:8-24: WARNING: intel_scu_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/iop_wdt.c:104:8-24: WARNING: iop_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/it8712f_wdt.c:330:8-24: WARNING: it8712f_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ixp4xx_wdt.c:68:8-24: WARNING: ixp4xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ks8695_wdt.c:145:8-24: WARNING: ks8695wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/m54xx_wdt.c:88:8-24: WARNING: m54xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/machzwd.c:336:8-24: WARNING: zf_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mixcomwd.c:153:8-24: WARNING: mixcomwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mtx-1_wdt.c:121:8-24: WARNING: mtx1_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mv64x60_wdt.c:136:8-24: WARNING: mv64x60_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nuc900_wdt.c:134:8-24: WARNING: nuc900wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nv_tco.c:164:8-24: WARNING: nv_tco_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pc87413_wdt.c:289:8-24: WARNING: pc87413_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:698:8-24: WARNING: pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:737:8-24: WARNING: pcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:581:8-24: WARNING: pcipcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:623:8-24: WARNING: pcipcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:488:8-24: WARNING: usb_pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:527:8-24: WARNING: usb_pcwd_temperature_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pika_wdt.c:121:8-24: WARNING: pikawdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pnx833x_wdt.c:119:8-24: WARNING: pnx833x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rc32434_wdt.c:153:8-24: WARNING: rc32434_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rdc321x_wdt.c:145:8-24: WARNING: rdc321x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/riowd.c:79:1-17: WARNING: riowd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sa1100_wdt.c:62:8-24: WARNING: sa1100dog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc60xxwdt.c:211:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc7240_wdt.c:139:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc8360.c:274:8-24: WARNING: sbc8360_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_epx_c3.c:81:8-24: WARNING: epx_c3_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_fitpc2_wdt.c:78:8-24: WARNING: fitpc2_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sb_wdog.c:108:1-17: WARNING: sbwdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc1200wdt.c:181:8-24: WARNING: sc1200wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc520_wdt.c:261:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sch311x_wdt.c:319:8-24: WARNING: sch311x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/scx200_wdt.c:105:8-24: WARNING: scx200_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/smsc37b787_wdt.c:369:8-24: WARNING: wb_smsc_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83877f_wdt.c:227:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83977f_wdt.c:301:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wafer5823wdt.c:200:8-24: WARNING: wafwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/watchdog_dev.c:828:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:379:8-24: WARNING: wdrtas_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:445:8-24: WARNING: wdrtas_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt285.c:104:1-17: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt977.c:276:8-24: WARNING: wdt977_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:424:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:484:8-24: WARNING: wdt_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:464:8-24: WARNING: wdtpci_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:527:8-24: WARNING: wdtpci_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. net/batman-adv/log.c:105:1-17: WARNING: batadv_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/control.c:57:7-23: WARNING: snd_ctl_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/rawmidi.c:385:7-23: WARNING: snd_rawmidi_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/seq/seq_clientmgr.c:310:7-23: WARNING: snd_seq_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/timer.c:1428:7-23: WARNING: snd_timer_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. One can also recheck/review the patch via generating it with explanation comments included via $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci SPFLAGS="-D explain" (*) This second group also contains cases with read/write deadlocks that stream_open.cocci don't yet detect, but which are still valid to convert to stream_open since ppos is not used. For example drivers/pci/switch/switchtec.c calls wait_for_completion_interruptible() in its .read, but stream_open.cocci currently detects only "wait_event*" as blocking. Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James R. Van Zandt" <jrv@vanzandt.mv.com> Cc: Corey Minyard <minyard@acm.org> Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> [scr24x_cs] Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Johan Hovold <johan@kernel.org> Cc: David Herrmann <dh.herrmann@googlemail.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Jean Delvare <jdelvare@suse.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [watchdog/* hwmon/*] Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> [drivers/pci/switch/switchtec] Acked-by: Bjorn Helgaas <bhelgaas@google.com> [drivers/pci/switch/switchtec] Cc: Benson Leung <bleung@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [platform/chrome] Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [rtc/*] Cc: Mark Brown <broonie@kernel.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Zwane Mwaikambo <zwanem@gmail.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
2019-05-06Merge branches 'for-5.1/upstream-fixes', 'for-5.2/core', 'for-5.2/ish', ↵Jiri Kosina23-653/+3346
'for-5.2/logitech', 'for-5.2/macally', 'for-5.2/picolcd', 'for-5.2/sensor' and 'for-5.2/u2fzero' into for-linus
2019-04-30HID: logitech-dj: fix spelling in printkColin Ian King1-1/+1
There is a spelling mistake in a hid_err error message, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-04-26HID: input: add mapping for KEY_KBD_LAYOUT_NEXTDmitry Torokhov1-0/+2
HUTRR56 defined a new usage code on consumer page to cycle through set of keyboard layouts, let's add this mapping. Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-24HID: input: fix assignment of .valueBenjamin Tissoires1-1/+1
The value field is actually an array of .maxfield. We should assign the correct number to the correct usage. Not that we never encounter a device that requires this ATM, but better have the proper code path. Fixes: 2dc702c991e377 ("HID: input: use the Resolution Multiplier for high-resolution scrolling") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-24HID: input: make sure the wheel high resolution multiplier is setBenjamin Tissoires2-33/+55
Some old mice have a tendency to not accept the high resolution multiplier. They reply with a -EPIPE which was previously ignored. Force the call to resolution multiplier to be synchronous and actually check for the answer. If this fails, consider the mouse like a normal one. Fixes: 2dc702c991e377 ("HID: input: use the Resolution Multiplier for high-resolution scrolling") Link: https://bugzilla.redhat.com/show_bug.cgi?id=1700071 Reported-and-tested-by: James Feeney <james@nurealm.net> Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-24HID: logitech-dj: add usbhid dependency in KconfigBenjamin Tissoires1-0/+1
An oversight from me. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-hidpp: add support for HID++ 1.0 consumer keys reportsHans de Goede1-12/+121
All Logitech 27 MHz keyboards and also the MX5000 bluetooth keyboard use Logitech custom usages of 0x10xx in the consumer page. The descriptor for the consumer input-report only declares usages up to 652, so we end up dropping all the input-reports reporting 0x10xx usages without reporting events for these to userspace. This commit adds a descriptor_fixup function for this which changes the usage and logical maximum to 0x107f. Mapping these usages to something other then KEY_UNKNOWN is left to userspace (hwdb). Note: 1. The old descriptor_fixup for this in hid-lg.c used a maximimum of 0x104d this is not high enough, the S520 keyboard battery key sends 0x106f. 2. The descriptor_fixup is flexible so that it works with both the kbd- desc. passed by the logitech-dj code and with bluetooth descriptors. The descriptor_fixup makes most keys work on 27 MHz keyboards, but it is not enough to get all keys to work on 27 MHz keyboards and just the fixup is not enough to get the MX5000 to generate 0x10xx events: 1) The LX501 and MX3000 27 MHz kbds both have a button labelled "media" (called "Media Player" by SetPoint) and a button with a remote-control symbol ("Media Life" in SetPoint) which both send an identical consumer usage-page code (0x0183) making the 2 buttons indistinguishable, switching to HID++ 1.0 consumer keys reports makes the remote-control symbol button generate a 0x10xx Logitech specific code instead. 2) The MX5000 Bluetooth keyboard has 11 keys which report 0x10xx consumer page usages, but unlike 27 MHz devices which happily send 0x10xx codes in their normal consumer-page input-report, the MX5000 honors the maximum of 652 from its descriptor and sends a 0x0000 code (so release) whenever these keys are pressed. When switching to HID++ sub-id 0x03 HID++ 1.0 consumer keys reports these 0x10xx codes do get properly reported. This commit adds support for HID++ 1.0 consumer keys reports and enables this for all 27 MHz keyboards and for the MX5000. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-hidpp: add support for HID++ 1.0 extra mouse buttons reportsHans de Goede1-1/+76
Some mice have extra buttons which are only reported through HID++ 1.0 extra mouse buttons reports, this commit adds support for this and automatically enables this support for all 27 MHz mice. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-hidpp: add support for HID++ 1.0 wheel reportsHans de Goede1-0/+94
Add a quirk for switching wheel event reporting to using the HID++ report for this. This has 2 advantages: 1) Without this tilting the scrollwheel left / right will send a scroll-lock + cursor-left/-right + scroll-lock key-sequence instead of hwheel events 2) The HID++ reports contain the device index instead of using the generic HID implementation, so this will make scroll-wheel events from the wheel on some keyboards be emitted by the right event node. 2. also fixes keyboard scroll-wheel events getting lost in the (mostly theoretical) case of there not being a mouse paired with the receiver. This commit enables this quirk for all 27Mhz mice, it cannot hurt to have it enabled and this avoids the need to keep adding more and more quirks for this. This has been tested in 5 different 27MHz mice, 3 of which have a wheel which can tilt. This commit also adds explicit quirks for 3 keyboards with a zoom-/scroll- wheel. The MX3000 keyboard scroll-wheel can also tilt. I've defined aliases to the new HIDPP_QUIRK_HIDPP_WHEELS for this, so that it is clear why the keyboard has the quirk and in case we want to handle the keyboard wheels and especially the keyboard zoom-wheels differently in the future. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-hidpp: make hidpp10_set_register_bit a bit more genericHans de Goede1-8/+19
Make hidpp10_set_register_bit() take a mask and value for the register byte being changed, rather then making it only set a single bit. While at it also at defines for the bits which we will be using. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-hidpp: add input_device ptr to struct hidpp_deviceHans de Goede1-87/+56
Most device-class specific code needs access to the input_device, instead of storing that in the class specific data-struct, simply store this into the hidpp_device struct itself. In case of the m560 this avoids the need for having private data at all and this will also avoid the need to add private data in some upcoming patches. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-hidpp: do not hardcode very long report lengthHans de Goede1-18/+32
The HID++ spec says the following about the very long report length: "n Bytes, depends on HID++ collection declaration". Hardcoding this breaks talking to some HID++ devices over BlueTooth, since they declare only 45 bytes data for the very long report, rather then the hardcoded 63. This commit fixes this by getting the actual report length from the descriptors. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-hidpp: handle devices attached to 27MHz wireless receiversHans de Goede1-0/+6
Logitech 27MHz devices are HID++ devices, so handle them in the hidpp driver, this enables battery monitoring on these devices (and more in follow-up patches). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-hidpp: use RAP instead of FAP to get the protocol versionHans de Goede1-4/+13
According to the logitech_hidpp_2.0_specification_draft_2012-06-04.pdf doc: https://lekensteyn.nl/files/logitech/logitech_hidpp_2.0_specification_draft_2012-06-04.pdf We should use a register-access-protocol request using the short input / output report ids. This is necessary because 27MHz HID++ receivers have a max-packetsize on their HIP++ endpoint of 8, so they cannot support long reports. Using a feature-access-protocol request (which is always long or very-long) with these will cause a timeout error, followed by the hidpp driver treating the device as not being HID++ capable. This commit fixes this by switching to using a rap request to get the protocol version. Besides being tested with a (046d:c517) 27MHz receiver with various 27MHz keyboards and mice, this has also been tested to not cause regressions on a non-unifying dual-HID++ nano receiver (046d:c534) with k270 and m185 HID++-2.0 devices connected and on a unifying/dj receiver (046d:c52b) with a HID++-2.0 Logitech Rechargeable Touchpad T650. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-hidpp: remove unused origin_is_hid_core function parameterHans de Goede1-7/+7
All the various populate_input functions have an origin_is_hid_core function parameter, but none use it, remove it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-hidpp: remove double assignment from __hidpp_send_reportHans de Goede1-2/+0
The hidpp variable is already initialized with hid_get_drvdata(hdev) when it is declared, drop the second no-op assignment. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-hidpp: do not make failure to get the name fatalHans de Goede1-11/+8
With devices attached to a non-unifying 2.4GHz receiver we sometimes fail to get the name. This is not a fatal error, we can just continue with the original name. So instead of bailing out, continue with battery-initialization when this happens. This fixes the battery not getting registered when we fail to get the name. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-hidpp: ignore very-short or empty namesHans de Goede1-0/+3
Some devices report an empty or very short name, in this case stick with the name generated by the logitech-dj code instead of overriding it with e.g. "Logitech ". Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-hidpp: make .probe usbhid capableBenjamin Tissoires1-41/+45
The current custom solution for the G920 is not the best because hid_hw_start() is not called at the end of the .probe(). It means that any configuration retrieved after the initial hid_hw_start would not be exposed to user space without races. We can simply force hid_hw_start to just enable the transport layer by not using a connect_mask. This way, we can have a common path between USB, Unifying and Bluetooth devices. With this change, we can now support the non DJ receivers for low end devices, which will allow us to fetch the actual names of the paired device (instead of 'Logitech Wireless Receiver') Tested with a M185 with the non unifying receiver, a T650 and many other unifying devices, and the T651 over Bluetooth. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-hidpp: allow non HID++ devices to be handled by this moduleBenjamin Tissoires1-8/+68
On the gaming mice, there are 2 interfaces, one for the mouse and one for the macros. Better allow everybody to go through hid-logitech-hidpp than trying to be smarter. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: add support for Logitech Bluetooth Mini-ReceiverHans de Goede1-6/+85
Add support for the Logitech Bluetooth Mini-Receiver in HID proxy mode This requires some special handing in dj_find_receiver_dev because the BT Mini-Receiver contains a built-in hub and has separate USB-devices for the keyboard and mouse interfaces, rather then using 2 interfaces on a single USB device. Otherwise this receiver works identical to the standard non-unifying nano receivers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: make appending of the HID++ descriptors conditionalHans de Goede1-14/+21
Make the appending of the HID++ descriptors in logi_dj_ll_parse conditional. This is a preparation patch for adding support for the Logitech mini Bluetooth receiver in HID proxy mode (its default mode), where some of the paired devices may not be Logitech devices and thus may not be HID++ capable. This uses a fake bit 63 in reports_supported, which is changed from an u32 to an u64 for this. Bits <= 31 are not usable for this because that would cause a behavioral change in logi_dj_recv_forward_null_report. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: remove false-positive error on double queueing of delayed-workHans de Goede1-18/+4
The various functions queueing work-items do not check there already is a work-item queued before calling schedule_work(), as such they may race with each-other and with the re-queuing done by the delayedwork_callback itself. This is fine as the delayedwork_callback simply is a nop if scheduled once too much. I've actually seen the false-positive hid_err for this trigger in practice, so lets remove it. While at it also remove the somewhat overzealous debugging around the schedule_work() calls. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: pick a better name for non-unifying receiversHans de Goede1-5/+29
hidpp_unifying_get_name() does not work for devices attached to non-unifying receivers. Since we do get a device-type in the device- connection report, we can pick a better name for these devices in hid-logitech-dj.c . Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: deal with some KVMs adding an extra interface to the usbdevHans de Goede1-1/+31
My Aten cs1764a KVM adds an extra interface to the receiver through which it forwards mouse events, if a separate mouse is plugged in next to the receiver dongle. This interface is present even if no extra mouse is plugged in. logitech-dj trying to handle this extra interface causes mouse events send through the extra interface to not be properly handled. This commit fixes this by treating any extra interfaces as hid-generic interfaces. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: replace dev_err calls with hid_err callsHans de Goede1-27/+18
Use hid_err consistently everywhere. While at it also tweak some of the messages for clarity, to consistently have a space after a ':' and in some cases to fit within 80 chars. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: add support for 27 MHz mouse-only receiversHans de Goede2-0/+15
27 MHz mouse-only receivers send an unnumbered input report with the mouse data, add special handling for this and add the c51b product-id to the logi_dj_receivers table. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: add support for 27 MHz receiversHans de Goede3-4/+93
Most Logitech wireless keyboard and mice using the 27 MHz are hidpp10 devices, add support to logitech-dj for their receivers. Doing so leads to 2 improvements: 1) All these devices share the same USB product-id for their receiver, making it impossible to properly map some special keys / buttons which differ from device to device. Adding support to logitech-dj to see these as hidpp10 devices allows us to get the actual device-id from the keyboard / mouse. 2) It enables battery-monitoring of these devices This patch uses a new HID group for 27Mhz devices, since the logitech-hidpp code needs to be able to differentiate them from other devices instantiated by the logitech-dj code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: add support for the gaming unifying receiverBenjamin Tissoires2-1/+58
This receiver is almost identical to the normal unifying ones except: - it is supposed to be paired to only one device (for performance reasons) - the mice reports have a greater ranges in their values, so they are using a different report ID. Tested on a G403 and a G900. Co-authored-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: add support for non unifying receiversHans de Goede2-39/+274
We emulate the DJ functionality through the driver. The receiver supports "fake device arrival" which behaves like the probing of DJ devices. A non-unifying receiver has 2 USB interfaces, the first one generates standard keypresses and is compatible with the USB Keyboard Boot Subclass. The second interface sends events for the mouse and special keys such as the consumer-page keys. Events are split this way for BIOS / Windows / generic-hid driver compatibility. This split does not actually match with which device the event originate from, e.g. the consumer-page key events originate from the keyboard but are delivered on the mouse interface. To make sure the events are actually delivered to the dj_device representing the originating device, we pick which dj_dev to forward a "regular" input-report to based on the report-number, rather then based on the originating interface. Co-authored-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: add logi_dj_recv_queue_unknown_work helperHans de Goede1-15/+30
Add a logi_dj_recv_queue_unknown_work helper and implement query rate-limiting inside this helper. The motivations behind this are: 1) We need to queue workitems for reports with no place to forward them from more places with the upcoming non-unifying receiver support, hence the addition of the helper function. 2) When we've missed a pairing info report (or there is a race between the report and input-events) and the input report is e.g. from a mouse being moved, we will get a lot of these before we've finished (re-) querying and enumerating the devices, hence the rate-limiting. Note this also removes the: if (!djrcv_dev->paired_dj_devices[hidpp_report->device_index]) check previously guarding the sending of an unknown workitem, the caller of logi_dj_recv_queue_notification already does this check before calling logi_dj_recv_queue_notification. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: support sharing struct dj_receiver_dev between USB-interfacesHans de Goede1-27/+149
dj/HID++ receivers are really a single logical entity, but for BIOS/Windows compatibility they have multiple USB interfaces. For the upcoming non-unifying receiver support, we need to listen for events from / bind to all USB-interfaces of the receiver. This commit add support to the logitech-dj code for creating a single dj_receiver_dev struct for all interfaces belonging to a single USB-device / receiver, in preparation for adding non-unifying receiver support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: rename dj_receiver_dev.hdev to dj_receiver_dev.hidppHans de Goede1-12/+10
For the upcoming non-unifying receiver support, we are going to bind to all USB-interfaces of a receiver, sharing a single struct dj_receiver_dev between the interfaces. This means that dj_receiver_dev will contain multiple pointers to a struct hid_device. Rename the current hdev member to hidpp to prepare for this. While at it switch dev_err calls which we are touching anyways from dev_err to hid_err. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: protect the paired_dj_devices access in add_djhid_dev with ↵Hans de Goede1-0/+6
the lock This protects against logi_dj_recv_add_djhid_device, adding a device to paired_dj_devices from the delayedwork callback, racing versus logi_dj_raw_event trying to access that device. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: remove unused querying_devices variableHans de Goede1-5/+0
querying_devices is never set, so it can safely be removed. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: do not schedule the dj report itselfBenjamin Tissoires1-51/+85
This is a preparatory patch for handling non DJ (HID++ only) receivers, through this module. We can not use the dj_report in the delayed work callback as the HID++ notifications are different both in size and meaning. There should be no functional change. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: remove USB dependencyBenjamin Tissoires1-33/+35
It is better to rely on the actual content of the report descriptors to enable or not a HID interface. While at it, remove the other USB dependency to have a fully USB agnostic driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: declare and use a few HID++ 1.0 constantsBenjamin Tissoires1-3/+12
For the non DJ receivers, we are going to need to re-use those constants, better have them properly defined. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: use BIT() macro for RF Report typesBenjamin Tissoires1-6/+6
Use BIT() macro for RF Report types. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: fix variable naming in logi_dj_hidpp_eventBenjamin Tissoires1-3/+10
we are not dealing with a dj_report but a hidpp_event. We don't need all of the struct description in this function, but having the variable named `dj_report` feels weird. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech-dj: reshuffle logi_dj_recv_forward_*Benjamin Tissoires1-7/+7
logi_dj_recv_forward_report() was only intended for DJ reports. logi_dj_recv_forward_hidpp() is more generic at forwarding random HID reports. So rename logi_dj_recv_forward_report() into logi_dj_recv_forward_dj() and logi_dj_recv_forward_hidpp() into logi_dj_recv_forward_report(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: logitech: Stop setting drvdata to NULL on probe failure and removeBenjamin Tissoires2-7/+3
There is no need to set drvdata to NULL on probe failure and remove, the driver-core already does this for us. [hdegoede@redhat.com: Isolate Logitech changes into a separate patch] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23HID: quirks: do not blacklist Logitech devicesBenjamin Tissoires1-5/+0
I am actually suggesting people to not populate this list, and I should probably start to apply my advices to myself. The end result means that if your initrd is lacking hid-logitech-dj or hid-logitech-hidpp, but still contains hid-generic, then your keyboard will work during pre-init. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-23Merge branch 'for-5.1/upstream-fixes' into for-5.2/logitechBenjamin Tissoires10-21/+48
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-04 17:48:50 +0000