summaryrefslogtreecommitdiffstats
path: root/drivers/hid
AgeCommit message (Collapse)AuthorFilesLines
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds6-10/+10
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31Merge branch 'for-linus' of ↵Linus Torvalds23-1386/+1970
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - remove hid_have_special_driver[] entry hard requirement for any newly supported VID/PID by a specific non-core hid driver, and general related cleanup of HID matching core, from Benjamin Tissoires - support for new Wacom devices and a few small fixups for already supported ones in Wacom driver, from Aaron Armstrong Skomra and Jason Gerecke - sysfs interface fix for roccat driver from Dan Carpenter - support for new Asus HW (T100TAF, T100HA, T200TA) from Hans de Goede - improved support for Jabra devices, from Niels Skou Olsen - other assorted small fixes and new device IDs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits) HID: quirks: Fix keyboard + touchpad on Toshiba Click Mini not working HID: roccat: prevent an out of bounds read in kovaplus_profile_activated() HID: asus: Fix special function keys on T200TA HID: asus: Add touchpad max x/y and resolution info for the T200TA HID: wacom: Add support for One by Wacom (CTL-472 / CTL-672) HID: wacom: Fix reporting of touch toggle (WACOM_HID_WD_MUTE_DEVICE) events HID: intel-ish-hid: Enable Cannon Lake and Coffee Lake laptop/desktop HID: elecom: rewrite report fixup for EX-G and future mice HID: sony: Report DS4 version info through sysfs HID: sony: Print reversed MAC address via %pMR HID: wacom: EKR: ensure devres groups at higher indexes are released HID: rmi: Support the Fujitsu R726 Pad dock using hid-rmi HID: add quirk for another PIXART OEM mouse used by HP HID: quirks: make array hid_quirks static HID: hid-multitouch: support fine-grain orientation reporting HID: asus: Add product-id for the T100TAF and T100HA keyboard docks HID: elo: clear BTN_LEFT mapping HID: multitouch: Combine all left-button events in a frame HID: multitouch: Only look at non touch fields in first packet of a frame HID: multitouch: Properly deal with Win8 PTP reports with 0 touches ...
2018-01-31Merge branches 'for-4.16/upstream' and 'for-4.15/upstream-fixes' into for-linusJiri Kosina7-21/+17
Pull assorted small fixes queued for merge window.
2018-01-31Merge branch 'for-4.16/i2c-hid' into for-linusJiri Kosina1-5/+13
2018-01-31Merge branch 'for-4.16/wacom' into for-linusJiri Kosina3-29/+178
Pull Wacom device driver updates. These don't have to go on top of the hid_have_special_driver[] revamp, as the whole group is assumed to have a special driver based on VID.
2018-01-31Merge branch 'for-4.16/elo' into for-linusJiri Kosina1-0/+6
Pull hid-elo device detection fix
2018-01-31Merge branches 'for-4.16/hid-quirks-cleanup/asus', ↵Jiri Kosina10-59/+308
'for-4.16/hid-quirks-cleanup/elecom', 'for-4.16/hid-quirks-cleanup/ish', 'for-4.16/hid-quirks-cleanup/multitouch', 'for-4.16/hid-quirks-cleanup/pixart', 'for-4.16/hid-quirks-cleanup/rmi', 'for-4.16/hid-quirks-cleanup/sony' and 'for-4.16/hid-quirks-cleanup/toshiba' into for-linus Pull assorted device driver fixes (ASUS, Elecom, Intel-ISH, Multitouch, PixArt, RMI, Sony and Toshiba) based on top the hid-quirks revamp.
2018-01-31Merge branch 'for-4.16/hid-quirks-cleanup/_base' into for-linusJiri Kosina9-1287/+1463
This series from Benjamin Tissoires finally removes one of the big PITAs in the hid-core, which is the absolute need of having added all the new device IDs into the horrid hid_have_special_driver[]
2018-01-30Merge branch 'misc.poll' of ↵Linus Torvalds6-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-23HID: quirks: Fix keyboard + touchpad on Toshiba Click Mini not workingHans de Goede1-1/+11
The Toshiba Click Mini uses an i2c attached keyboard/touchpad combo (single i2c_hid device for both) which has a vid:pid of 04F3:0401, which is also used by a bunch of Elan touchpads which are handled by the drivers/input/mouse/elan_i2c driver, but that driver deals with pure touchpads and does not work for a combo device such as the one on the Toshiba Click Mini. The combo on the Mini has an ACPI id of ELAN0800, which is not claimed by the elan_i2c driver, so check for that and if it is found do not ignore the device. This fixes the keyboard/touchpad combo on the Mini not working (although with the touchpad in mouse emulation mode). Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-01-23HID: roccat: prevent an out of bounds read in kovaplus_profile_activated()Dan Carpenter1-0/+2
We get the "new_profile_index" value from the mouse device when we're handling raw events. Smatch taints it as untrusted data and complains that we need a bounds check. This seems like a reasonable warning otherwise there is a small read beyond the end of the array. Fixes: 0e70f97f257e ("HID: roccat: Add support for Kova[+] mouse") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Silvan Jegen <s.jegen@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-01-23HID: asus: Fix special function keys on T200TAHans de Goede1-2/+3
Just like on the T100TA the T200TA HID descriptors for the 0xff32 Asus vendor usage page need a small fixup. But on the T200TA the HID descriptors are larger because they have descrriptors for one more (unused) HID report appended. Extend the T100TA descriptor fixup to also check for the T200TA's descriptors size. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-01-23HID: asus: Add touchpad max x/y and resolution info for the T200TAHans de Goede1-2/+14
The Asus T200TA uses the same USB device-id for its keyboard dock as the T100TA, but the touchpad has a different size and corresponding different max x/y values. Add a separate asus_touchpad_info struct for the T200TA and select this based on the DMI product-name (as we are already doing for the T100HA), so that we report the correct info to userspace. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-01-23HID: wacom: Add support for One by Wacom (CTL-472 / CTL-672)Jason Gerecke1-0/+8
Adds support for the second-generation "One by Wacom" tablets. These devices are similar to the last generation, but a slightly different size and reporting a higher number of pressure levels. Signed-off-by: Mx Jing <jingmingxuan@outlook.com> Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-01-23HID: wacom: Fix reporting of touch toggle (WACOM_HID_WD_MUTE_DEVICE) eventsJason Gerecke1-8/+8
Touch toggle softkeys send a '1' while pressed and a '0' while released, requring the kernel to keep track of wether touch should be enabled or disabled. The code does not handle the state transitions properly, however. If the key is pressed repeatedly, the following four states of states are cycled through (assuming touch starts out enabled): Press: shared->is_touch_on => 0, SW_MUTE_DEVICE => 1 Release: shared->is_touch_on => 0, SW_MUTE_DEVICE => 1 Press: shared->is_touch_on => 1, SW_MUTE_DEVICE => 0 Release: shared->is_touch_on => 1, SW_MUTE_DEVICE => 1 The hardware always properly enables/disables touch when the key is pressed but applications that listen for SW_MUTE_DEVICE events to provide feedback about the state will only ever show touch as being enabled while the key is held, and only every-other time. This sequence occurs because the fallthrough WACOM_HID_WD_TOUCHONOFF case is always handled, and it uses the value of the *local* is_touch_on variable as the value to report to userspace. The local value is equal to the shared value when the button is pressed, but equal to zero when the button is released. Reporting the shared value to userspace fixes this problem, but the fallthrough case needs to update the shared value in an incompatible way (which is why the local variable was introduced in the first place). To work around this, we just handle both cases in a single block of code and update the shared variable as appropriate. Fixes: d793ff8187 ("HID: wacom: generic: support touch on/off softkey") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Skomra <aaron.skomra@wacom.com> Tested-by: Aaron Skomra <aaron.skomra@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-01-23HID: intel-ish-hid: Enable Cannon Lake and Coffee Lake laptop/desktopSrinivas Pandruvada2-0/+2
Added PCI ID for Cannon Lake and Coffee Lake laptop/desktop skews. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-01-23HID: elecom: rewrite report fixup for EX-G and future miceTomasz Kramkowski4-36/+47
This patch rewrites the mouse report fixup used for the DEFT and HUGE elecom trackballs in order to make it generic enough to fix other elecom mice with similar issues. This patch also uses this new report fixup function to fix the Elecom EX-G trackball which has 6 physical buttons and a similar issue to the other two mice. Elecom's track record has so far shown that they like to re-use the same report descriptor for multiple different mice regardless of the number of buttons the mouse has. This means that the missing buttons on multiple mice can be fixed in one function without introducing phantom buttons which would in turn cause the number of mouse buttons to be misreported to userspace. This patch drops the very verbose report descriptor "diff" comment for a more abridged yet hopefully just as informative generic version. Signed-off-by: Tomasz Kramkowski <tk@the-tk.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-01-23HID: sony: Report DS4 version info through sysfsRoderick Colenbrander1-0/+83
Report DS4 firmware and hardware version through sysfs for both USB and Bluetooth. This information is important for userspace in particular for device specific quirks (e.g. in Bluetooth stacks). Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-01-23HID: sony: Print reversed MAC address via %pMRAndy Shevchenko1-8/+2
Reversed MAC addresses can be printed directly using %pMR specifier. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Roderick Colenbrander <roderick.colenbranderer@sony.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-01-23HID: wacom: EKR: ensure devres groups at higher indexes are releasedAaron Armstrong Skomra1-12/+12
Background: ExpressKey Remotes communicate their events via usb dongle. Each dongle can hold up to 5 pairings at one time and one EKR (identified by its serial number) can unfortunately be paired with its dongle more than once. The pairing takes place in a round-robin fashion. Input devices are only created once per EKR, when a new serial number is seen in the list of pairings. However, if a device is created for a "higher" paring index and subsequently a second pairing occurs at a lower pairing index, unpairing the remote with that serial number from any pairing index will currently cause a driver crash. This occurs infrequently, as two remotes are necessary to trigger this bug and most users have only one remote. As an illustration, to trigger the bug you need to have two remotes, and pair them in this order: 1. slot 0 -> remote 1 (input device created for remote 1) 2. slot 1 -> remote 1 (duplicate pairing - no device created) 3. slot 2 -> remote 1 (duplicate pairing - no device created) 4. slot 3 -> remote 1 (duplicate pairing - no device created) 5. slot 4 -> remote 2 (input device created for remote 2) 6. slot 0 -> remote 2 (1 destroyed and recreated at slot 1) 7. slot 1 -> remote 2 (1 destroyed and recreated at slot 2) 8. slot 2 -> remote 2 (1 destroyed and recreated at slot 3) 9. slot 3 -> remote 2 (1 destroyed and not recreated) 10. slot 4 -> remote 2 (2 was already in this slot so no changes) 11. slot 0 -> remote 1 (The current code sees remote 2 was paired over in one of the dongle slots it occupied and attempts to remove all information about remote 2 [1]. It calls wacom_remote_destroy_one for remote 2, but the destroy function assumes the lowest index is where the remote's input device was created. The code "cleans up" the other remote 2 pairings including the one which the input device was based on, assuming they were were just duplicate pairings. However, the cleanup doesn't call the devres release function for the input device that was created in slot 4). This issue is fixed by this commit. [1] Remote 2 should subsequently be re-created on the next packet from the EKR at the lowest numbered slot that it occupies (here slot 1). Fixes: f9036bd43602 ("HID: wacom: EKR: use devres groups to manage resources") Cc: stable <stable@vger.kernel.org> #4.9 Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-01-23HID: rmi: Support the Fujitsu R726 Pad dock using hid-rmiAndrew Duggan3-0/+3
The Fujitsu R726 Pad has an optional USB keyboard dock which contains a Synaptics touchpad. The dock identifies itself as a Primax Rezel Tablet Keyboard. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-12-30Merge branch 'for-linus' of ↵Linus Torvalds3-7/+18
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - two cosmetic fixes from Daniel Axtens and Hans de Goede - fix for I2C command mismatch fix for cp2112 driver from Eudean Sun * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: core: lower log level for unknown main item tags to warnings HID: holtekff: move MODULE_* parameters out of #ifdef block HID: cp2112: Fix I2C_BLOCK_DATA transactions
2017-12-07HID: add quirk for another PIXART OEM mouse used by HPDave Young2-0/+2
This mouse keep disconnecting in runleve 3 like below, add it needs the quirk to mute the anoying messages. [ 111.230555] usb 2-2: USB disconnect, device number 6 [ 112.718156] usb 2-2: new low-speed USB device number 7 using xhci_hcd [ 112.941594] usb 2-2: New USB device found, idVendor=03f0, idProduct=094a [ 112.984866] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 113.027731] usb 2-2: Product: HP USB Optical Mouse [ 113.069977] usb 2-2: Manufacturer: PixArt [ 113.113500] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:03F0:094A.0002/input/input14 [ 113.156787] hid-generic 0003:03F0:094A.0002: input: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.0-2/input0 [ 173.262642] usb 2-2: USB disconnect, device number 7 [ 174.750244] usb 2-2: new low-speed USB device number 8 using xhci_hcd [ 174.935740] usb 2-2: New USB device found, idVendor=03f0, idProduct=094a [ 174.990435] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 175.014984] usb 2-2: Product: HP USB Optical Mouse [ 175.037886] usb 2-2: Manufacturer: PixArt [ 175.061794] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:03F0:094A.0003/input/input15 [ 175.084946] hid-generic 0003:03F0:094A.0003: input: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.0-2/input0 Signed-off-by: Dave Young <dyoung@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-12-07HID: core: lower log level for unknown main item tags to warningsHans de Goede1-1/+1
Given all the effort distros have done with splash-screens to give users a nice clean boot experience, we really want dmesg --level=err to not print anything unless there is a real problem with either the hardware or the kernel. Buggy HID descriptors unfortunately happen all too often, so lower the log level to warning keep the console clear of error messages such as: [ 441.079664] apple 0005:05AC:0239.0003: unknown main item tag 0x0 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-12-07HID: quirks: make array hid_quirks staticColin Ian King1-1/+1
Array hid_quirks is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: drivers/hid/hid-quirks.c:29:28: warning: symbol 'hid_quirks' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-12-01HID: hid-multitouch: support fine-grain orientation reportingWei-Ning Huang1-4/+48
The current hid-multitouch driver only allow the report of two orientations, vertical and horizontal. We use the Azimuth orientation usage 0x3F under the Digitizer usage page to report orientation if the device supports it. Changelog: v1 -> v2: - Fix commit message. - Remove resolution reporting for ABS_MT_ORIENTATION. v2 -> v3: - Fix commit message. v3 -> v4: - Fix ABS_MT_ORIENTATION ABS param range. - Don't set ABS_MT_ORIENTATION in ABS_DG_HEIGHT when it is already set by ABS_DG_AZIMUTH. v4 -> v5: - Improve multi-touch-protocol.rst documentation. Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org> Signed-off-by: Wei-Ning Huang <wnhuang@google.com> Reviewed-by: Dmitry Torokhov <dtor@chromium.org> Reviewed-by: Henrik Rydberg <rydberg@bitmath.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-12-01HID: asus: Add product-id for the T100TAF and T100HA keyboard docksHans de Goede3-4/+24
The T100TAF and T100HA keyboard docks have the same special keys and custom protocol multitouch touchpad as the T100TA, but use a different product id. The T100TAF and T100HA both use the same product id, but the T100HA's touchpad has a different coordinate range. This commits adds supports for the new USB id and uses a dmi-check to determine if we're dealing with the T100TAF or T100HA. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197849 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-12-01HID: holtekff: move MODULE_* parameters out of #ifdef blockDaniel Axtens1-4/+4
If you compile with: CONFIG_HID_HOLTEK=m CONFIG_HOLTEK_FF is not set You get the following warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/hid/hid-holtekff.o see include/linux/module.h for more information Fix this by moving the module info out of the #ifdef CONFIG_HOLTEK_FF block and into the un-guarded part of the file. Signed-off-by: Daniel Axtens <dja@axtens.net> Acked-by: Anssi Hannula <anssi.hannula@iki.fi> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro6-7/+7
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-24HID: elo: clear BTN_LEFT mappingJiri Kosina1-0/+6
ELO devices have one Button usage in GenDesk field, which makes hid-input map it to BTN_LEFT; that confuses userspace, which then considers the device to be a mouse/touchpad instead of touchscreen. Fix that by unmapping BTN_LEFT and keeping only BTN_TOUCH in place. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-22HID: multitouch: Combine all left-button events in a frameHans de Goede1-0/+20
According to the Win8 Precision Touchpad spec, inside the HID_UP_BUTTON usage-page usage 1 is for a clickpad getting clicked, 2 for an external left button and 3 for an external right button. Since Linux uses BTN_LEFT for a clickpad being clicked we end up mapping both usage 1 and 2 to BTN_LEFT and if a single report contains both then we ended up always reporting the value of both in a single SYN, e.g. : BTN_LEFT 1, BTN_LEFT 0, SYN. This happens for example with Hantick HTT5288 i2c mt touchpads. This commit fixes this by not immediately reporting left button when we parse the report, but instead storing or-ing together the values and reporting the result from mt_sync_frame() when we've a complete frame. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-22HID: multitouch: Only look at non touch fields in first packet of a frameHans de Goede1-2/+15
Devices in "single finger hybrid mode" will send one report per finger, on some devices only the first report of such a multi-packet frame will contain a value for BTN_LEFT, in subsequent reports (if multiple fingers are down) the value is always 0, causing hid-mt to report BTN_LEFT going 1 - 0 - 1 - 0 when pressing a clickpad and putting down a second finger. This happens for example on USB 0603:0002 mt touchpads. This commit fixes this by only reporting non touch fields for the first packet of a (possibly) multi-packet frame. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-22HID: multitouch: Properly deal with Win8 PTP reports with 0 touchesHans de Goede1-2/+30
The Windows Precision Touchpad spec "Figure 4 Button Only Down and Up" and "Table 9 Report Sequence for Button Only Down and Up" indicate that the first packet of a (possibly hybrid mode multi-packet) frame may contain a contact-count of 0 if only a button is pressed and no fingers are detected. This means that a value of 0 for contact-count is a valid value and should be used as expected contact count when it is the first packet (num_received == 0), as extra check to make sure that this is the first packet of a buttons only frame, we also check that the timestamp is different. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-22HID: multitouch: Fix alphabetic sorting of mt_devices table.Hans de Goede1-8/+8
Fix alphabetic sorting of mt_devices hid_device_id table. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook3-11/+9
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21HID: cp2112: Fix I2C_BLOCK_DATA transactionsEudean Sun1-2/+13
The existing driver erroneously treats I2C_BLOCK_DATA and BLOCK_DATA commands the same. For I2C_BLOCK_DATA reads, the length of the read is provided in data->block[0], but the length itself should not be sent to the slave. In contrast, for BLOCK_DATA reads no length is specified since the length will be the first byte returned from the slave. When copying data back to the data buffer, for an I2C_BLOCK_DATA read we have to take care not to overwrite data->block[0] to avoid overwriting the length. A BLOCK_DATA read doesn't have this concern since the first byte returned by the device is the length and belongs in data->block[0]. For I2C_BLOCK_DATA writes, the length is also provided in data->block[0], but the length itself is not sent to the slave (in contrast to BLOCK_DATA writes where the length prefixes the data sent to the slave). This was tested on physical hardware using i2cdump with the i and s flags to test the behavior of I2C_BLOCK_DATA reads and BLOCK_DATA reads, respectively. Writes were not tested but the I2C_BLOCK_DATA write change is pretty simple to verify by inspection. Signed-off-by: Eudean Sun <eudean@arista.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-21HID: i2c-hid: Allow ACPI systems to specify "post-power-on-delay-ms"Rajat Jain1-5/+13
The property "post-power-on-delay-ms" allows a platform to specify the delay needed after power-on, but only via device trees currently. Use device_property_* instead of of_* reads to allow ACPI systems to also provide the same information. This is useful for Wacom hardware on ACPI systems. Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-21HID: wacom: Queue events with missing type/serial data for later processingJason Gerecke3-0/+114
Userspace expects to receive tool type and serial number information for the active pen in the very first kernel report, if such data is supported by the hardware. While this expectation is not an issue for EMR devices, AES sensors will often send several packets worth of in- range data before relaying type/serial data to the kernel. Sending this data "late" can result in proximity-tracking issues by xf86-input-wacom, or an inability to distinguish different pens by input-wacom. Options for dealing with this situation include ignoring reports from the tablet until we get the necessary data, or using the information from the last-seen pen instead of the (eventual) real data. Neither option is particularly attractive: the former results in truncated strokes and the latter causes issues with switching between pens. This commit instead opts to queue up events with missing information until we receive a report which contains it. At that point, we can update the driver's state variables (id[0] and serial[0]) and replay the queued events. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-21HID: wacom: Properly handle AES serial number and tool typeJason Gerecke2-9/+36
Current AES sensors relay tool type and serial number information with a different set of usages than those prescribed by the modern (i.e. MobileStudio Pro and newer) EMR tablet standard. To ensure the driver properly understands these usages, we modify them to be compatible. The identifying information is split across three consecutive fields: a 16-bit WACOM_HID_WT_SERIALNUMBER (which is more accurately described as WACOM_HID_WD_TOOLTYPE), a 32-bit HID_DG_TOOLSERIALNUMBER, and an 8-bit 0xFF000000 (which should be WACOM_HID_WD_SERIALHI). While we're at it, we also define proper min/max values since may may be undefined on some devices. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-21HID: Add special driver for Jabra devicesNiels Skou Olsen4-0/+73
Add a hid-jabra driver to the list of special drivers in hid-core. The driver prevents vendor defined HID usages (FF00-FFFF) in Jabra devices from being mapped to input events, that become unintended mouse events in the X11 server. Signed-off-by: Niels Skou Olsen <nolsen@jabra.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-21HID: Ignore Jabra HID interface based on firmware versionNiels Skou Olsen2-2/+15
Two Jabra speakerphone devices were added to the ignore list in 2013, because the device HID interfaces didn't work well with kernel usbhid driver, and could cause volume key event storm. See the original commit: Commit 31b9779cb292 ("HID: ignore Jabra speakerphones HID interface") Modify hid_lookup_quirk() to consider the firmware version of these two devices, so that only versions older than a known good version are ignored. Signed-off-by: Niels Skou Olsen <nolsen@jabra.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-21HID: core: remove the absolute need of hid_have_special_driver[]Benjamin Tissoires2-29/+115
Most HID devices behave properly when they are used with hid-generic. Since kernel v4.12, we do not poll for input reports at plug in, so hid-generic should behave properly with all HID devices. There has been a long standing list of HID devices that have a special driver. It used to be just a few, but with time, this list went too big, and we can not ask users to know which HID special driver will pick up their device. We can teach hid-generic to be nice with others. If a device is not explicitly marked with HID_QUIRK_HAVE_SPECIAL_DRIVER, we can allow hid-generic to pick up the device as long as no other loaded HID driver will match the device. When the special driver appears, hid-generic can step back and let the special driver handling the device. In case this special driver is removed, this good old pal of hid-generic will rebind to the device. This basically makes the list hid_have_special_driver[] useless. It still allows to not see a hid-generic driver bound and removed during boot, so we can keep it around. This will also help other people to have a special HID driver without the need of recompiling hid-core. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-21HID: core: move the list of ignored devices in hid-quirks.cBenjamin Tissoires2-309/+312
Better having all the devices quirks in one place. Note that this change introduces an initial lookup for the device in hid_gets_squirk(), which should not theoretically be required, but which actually allows to not have to reparse the list of ignored devices if we call hid_lookup_quirks twice. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-21HID: quirks: move the list of special devices into a quirkBenjamin Tissoires2-545/+547
It is better to centralize the information of special devices in one single file. Instead of manually parsing the list of devices that have a special driver or those that need to be ignored, introduce HID_QUIRK_HAVE_SPECIAL_DRIVER and set the correct quirks while fetching those quirks. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-21HID: core: move the dynamic quirks handling in coreBenjamin Tissoires6-413/+412
usbhid has a list of dynamic quirks in addition to a list of static quirks. There is not much USB specific in that, so move this part of the module in core so we can have one central place for quirks. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge tag 'modules-for-v4.15' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: "Summary of modules changes for the 4.15 merge window: - treewide module_param_call() cleanup, fix up set/get function prototype mismatches, from Kees Cook - minor code cleanups" * tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Do not paper over type mismatches in module_param_call() treewide: Fix function prototypes for module_param_call() module: Prepare to convert all module_param_call() prototypes kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
2017-11-15Merge branch 'for-linus' of ↵Linus Torvalds1-1/+2
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual rocket-science from trivial tree for 4.15" * 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: MAINTAINERS: relinquish kconfig MAINTAINERS: Update my email address treewide: Fix typos in Kconfig kfifo: Fix comments init/Kconfig: Fix module signing document location misc: ibmasm: Return error on error path HID: logitech-hidpp: fix mistake in printk, "feeback" -> "feedback" MAINTAINERS: Correct path to uDraw PS3 driver tracing: Fix doc mistakes in trace sample tracing: Kconfig text fixes for CONFIG_HWLAT_TRACER MIPS: Alchemy: Remove reverted CONFIG_NETLINK_MMAP from db1xxx_defconfig mm/huge_memory.c: fixup grammar in comment lib/xz: Add fall-through comments to a switch statement
2017-11-15Merge branch 'for-linus' of ↵Linus Torvalds20-149/+605
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - high resolution mode for Dell canvas support, from Benjamin Tissoires - pen handling fixes for the Wacom driver, from Jason Gerecke - i2c-hid: Apollo-Lake based laptops improvements, from Hans de Goede - Input/Core: eraser tool support, from Ping Cheng - new ALPS touchpad (T4, found currently on HP EliteBook 1000, Zbook Stduio and HP Elite book x360) supportm from Masaki Ota - other smaller assorted fixes * 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (33 commits) HID: cp2112: fix broken gpio_direction_input callback HID: cp2112: fix interface specification URL HID: Wacom: switch Dell canvas into highres mode HID: wacom: generic: Send BTN_STYLUS3 when both barrel switches are set HID: sony: Fix SHANWAN pad rumbling on USB HID: i2c-hid: Add no-irq-after-reset quirk for 0911:5288 device HID: add backlight level quirk for Asus ROG laptops HID: cp2112: add HIDRAW dependency HID: Add ID 044f:b605 ThrustMaster, Inc. force feedback Racing Wheel HID: hid-logitech: remove redundant assignment to pointer value HID: wacom: generic: Recognize WACOM_HID_WD_PEN as a type of pen collection HID: rmi: Check that a device is a RMI device before calling RMI functions HID: add multi-input quirk for GamepadBlock HID: alps: add new U1 device ID HID: alps: add support for Alps T4 Touchpad device HID: alps: remove variables local to u1_init() from the device struct HID: alps: properly handle max_fingers and minimum on X and Y axis HID: alps: Separate U1 device code HID: alps: delete unnecessary struct u1_dev devInfo HID: usbhid: Convert timers to use timer_setup() ...
2017-11-15Merge branch 'for-4.15/wacom' into for-linusJiri Kosina3-15/+38
- High resolution mode for DEll canvas support, from Benjamin Tissoires - A lot of improvements to pen handling in the Wacom driver, from Jason Gerecke Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge branch 'for-4.15/use-timer-setup' into for-linusJiri Kosina2-8/+10
- usbhid: conversion to timer_setup() and from_timer() from Kees Cook Signed-off-by: Jiri Kosina <jkosina@suse.cz>