summaryrefslogtreecommitdiffstats
path: root/drivers/hid
AgeCommit message (Collapse)AuthorFilesLines
2014-10-29Merge branch 'for-linus' of ↵Linus Torvalds4-1/+21
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - workarounds for a couple of misbehaving Elan Touchscreens, by Adel Gadllah - fix for TransducerSerialNumber field implementation, by Jason Gerecke - a couple of new HID usages (added by HUT), by Olivier Gay * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: input: Fix TransducerSerialNumber implementation HID: add keyboard input assist hid usages HID: usbhid: enable always-poll quirk for Elan Touchscreen 016f HID: usbhid: enable always-poll quirk for Elan Touchscreen 009b
2014-10-29HID: input: Fix TransducerSerialNumber implementationJason Gerecke1-1/+4
The commit which introduced TransducerSerialNumber (368c966) is missing two crucial implementation details. Firstly, the commit does not set the type/code/bit/max fields as expected later down the code which can cause the driver to crash when a tablet with this usage is connected. Secondly, the call to 'set_bit' causes MSC_PULSELED to be sent instead of the expected MSC_SERIAL. This commit addreses both issues. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-20HID: add keyboard input assist hid usagesOlivier Gay2-0/+13
Add keyboard input assist controls usages from approved hid usage table request HUTTR42: http://www.usb.org/developers/hidpage/HUTRR42c.pdf Signed-off-by: Olivier Gay <ogay@logitech.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-10HID: usbhid: enable always-poll quirk for Elan Touchscreen 016fAdel Gadllah2-0/+2
This device needs the quirk as well. Tested-by: Kevin Fenzi <kevin@scrye.com> Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-10HID: usbhid: enable always-poll quirk for Elan Touchscreen 009bAdel Gadllah2-0/+2
This device needs the quirk as well. Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-09Merge tag 'gpio-v3.18-1' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom <asm/gpio.h> header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...
2014-10-06Merge branches 'for-3.18/always-poll-quirk', 'for-3.18/logitech', ↵Jiri Kosina21-1266/+5776
'for-3.18/picolcd', 'for-3.18/rmi', 'for-3.18/sony', 'for-3.18/uhid', 'for-3.18/upstream' and 'for-3.18/wacom' into for-linus
2014-10-01HID: uHID: fix excepted report typeBenjamin Tissoires1-1/+1
When uhid_get_report() or uhid_set_report() are called, they emit on the char device a UHID_GET_REPORT or UHID_SET_REPORT message. Then, the protocol says that the user space asnwers with UHID_GET_REPORT_REPLY or UHID_SET_REPORT_REPLY. Unfortunatelly, the current code waits for an event of type UHID_GET_REPORT or UHID_SET_REPORT instead of the reply one. Add 1 to UHID_GET_REPORT or UHID_SET_REPORT to actually wait for the reply, and validate the reply. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-01HID: usbhid: add another mouse that needs QUIRK_ALWAYS_POLLOliver Neukum2-0/+2
There is a second mouse sharing the same vendor strings but different IDs. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-01HID: wacom: implement the finger part of the HID generic handlingBenjamin Tissoires3-3/+164
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-01HID: wacom: implement generic HID handling for pen generic devicesBenjamin Tissoires5-2/+206
ISDv4 and v5 are plain HID devices. We can directly implement a generic HID parsing/handling and remove the need to manually add those PID in the list of supported devices. This patch implements the pen support only. The finger part will come in a later patch. To be properly notified of an .event() and a .report(), we need to force hid-core to go through the HID parsing. By default, wacom.ko binds only hidraw, so the hid parsing is not done by hid-core. When a true HID device is there, we add the flag HID_CLAIMED_DRIVER to hid->claimed which will force hid-core to parse the incoming reports. (Note that this can be easily backported by directly setting the .claimed flag to HID_CLAIMED_DRIVER even if hid-core does not support HID_CONNECT_DRIVER) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-01HID: wacom: move allocation of inputs earlierBenjamin Tissoires1-3/+9
This allows to have the input devices ready in while parsing the reports descriptor. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-01HID: wacom: split out input allocation and registrationBenjamin Tissoires2-33/+64
If the input can be created earlier during probe, we can already populate them while reading the report descriptor. This way, we can rely on the hid subsystem directly for tablets which already provide a meaningful report descriptor (like ISDv4-5). This patch only splits the allocation and registration, but do not change where we allocate the input. This will come in a later patch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-01HID: wacom: rename failN with some meaningful informationBenjamin Tissoires1-20/+29
When we have to deal with new elements in probe, having the exit labels named sequencially is a pain to maintain. Put a meaningful name instead so that we do not have to renumber them on inserts. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-25HID: sony: Update the DualShock 4 touchpad resolutionFrank Praznik1-2/+2
The DualShock 4 touchpad has been measured to have a resolution of 44.86 dots/mm which equates to 1920x942. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-22HID: wacom: fix timeout on probe for some wacomsBenjamin Tissoires1-2/+16
Some Wacom tablets (at least the ISDv4 found in the Lenovo X230) timeout during probe while retrieving the input reports. The only time this information is valuable is during the feature_mapping stage, so we can ask for it there and discard the generic input reports retrieval. This gives a code path closer to the wacom.ko driver when it was in the input subtree (not HID). Cc: stable@vger.kernel.org # requires cherry-pick of c64d883476 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-22HID: sony: Set touchpad bits in the input_configured callbackFrank Praznik1-34/+40
Set the DualShock4 touchpad bits in the input_configured callback so that they are registered properly for any input devices created during hid_hw_start. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-18driver:gpio remove all usage of gpio_remove retval in driverabdoulaye berthe1-4/+2
this remove all reference to gpio_remove retval in all driver except pinctrl and gpio. the same thing is done for gpio and pinctrl in two different patches. Signed-off-by: Abdoulaye Berthe <berthe.ab@gmail.com> Acked-by: Michael Büsch <m@bues.ch> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-15HID: sony: Update file header and correct commentsFrank Praznik1-5/+6
Update the file header and correct an outdated comment block. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-15HID: sony: Corrections for the DualShock 4 HID descriptorFrank Praznik1-6/+6
Fix a few minor issues in the HID descriptor: - A 6 bit entry had a logical maximum of 255 when the largest it can be is 63. - A logical max value was incorrectly being set to -1 instead of 255. - Set the min/max of the gyroscopes to -8192/8191 as that is the range of values which represent the true controller orientation. Any values beyond those extents are just noise. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-12HID: rmi: check sanity of the incoming reportBenjamin Tissoires1-6/+38
In the Dell XPS 13 9333, it appears that sometimes the bus get confused and corrupts the incoming data. It fills the input report with the sentinel value "ff". Synaptics told us that such behavior does not comes from the touchpad itself, so we filter out such reports here. Unfortunately, we can not simply discard the incoming data because they may contain useful information. Most of the time, the misbehavior is quite near the end of the report, so we can still use the valid part of it. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1123584 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-12HID: wacom: make the WL connection friendly for the desktopBenjamin Tissoires2-1/+4
Currently, tablets connected to the WL receiver all share the same VID/PID. There is no way for the user space to know which one is which besides parsing the name. We can force the PID to be set to the actual hardware. This way, the input device will have the correct PID which can be match in libwacom. With only this trick, the pad input does not inherit the ID_INPUT_TABLET udev property from its parent. We can force udev to accept it by declaring a BTN_STYLUS which is never used. This way, tablets connected through WL can be used from the user point of view in the same way they are used while connected through wire. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-11HID: wacom - enable LED support for Wireless Intuos5/ProPing Cheng1-17/+35
And associate all LED/OLED to PAD device Signed-off-by: Ping Cheng <pingc@wacom.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-11HID: wacom - remove report_id from wacom_get_report interfacePing Cheng1-4/+4
It is assigned in buf[0] anyway. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-11HID: wacom - Clean up of sysfsPing Cheng1-2/+10
changed to scnprintf(buf, PAGE_SIZE, ... ) as suggested in sysfs.txt for show functions Signed-off-by: Paul A. Tessier <phernost@gmail.com> Signed-Off-by: Ping Cheng <pingc@wacom.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-11HID: wacom - Add default permission defines for sysfs attributesPing Cheng1-4/+7
RW : ug=rw,o=r WO : ug=w And enabled reading relavent sysfs attributes. Signed-off-by: Paul A. Tessier <phernost@gmail.com> Signed-Off-by: Ping Cheng <pingc@wacom.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-08HID: usbhid: fix PIXART optical mouseOliver Neukum2-0/+2
This mouse keeps disconnecting in runlevel 3. It needs the ALWAYS_POLL quirk. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-08HID: Add Holtek USB ID 04d9:a0c2 ETEKCITY ScrollJohn DeSilva3-0/+6
The report descriptor for the HOLTEK USB ID 04d9:a0c2 (ETEKCITY Scroll T-140 Gaming Mouse) is set to a very large amount of consumer usages (2^16), exceeding HID_MAX_USAGES. Added id, bindings and comments for the mouse, added to hid_have_special_driver, and reduced the usage and logical maximums to 0x2fff, consistent with the other mice in the category. Tested on the hardware. Signed-off-by: John C. DeSilva <desilvjo@umich.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-08HID: fix ignore_special_drivers modparam descriptionHans Petter Selasky1-1/+1
Signed-off-by: Hans Petter Selasky <hps@selasky.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-08HID: usbhid: enable always-poll quirk for Elan TouchscreenJohan Hovold2-0/+4
Enable the always-poll quirk for Elan Touchscreens found on some recent Samsung laptops. Without this quirk the device keeps disconnecting from the bus (and is re-enumerated) unless opened (and kept open, should an input event occur). Note that while the device can be run-time suspended, the autosuspend timeout must be high enough to allow the device to be polled at least once before being suspended. Specifically, using autosuspend_delay_ms=0 will still cause the device to disconnect on input events. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-08HID: usbhid: add always-poll quirkJohan Hovold1-3/+23
Add quirk to make sure that a device is always polled for input events even if it hasn't been opened. This is needed for devices that disconnects from the bus unless the interrupt endpoint has been polled at least once or when not responding to an input event (e.g. after having shut down X). Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-04HID: add support for PenMount HID TouchScreen DriverChristian Gmeiner5-0/+63
This patch adds a seperate hid-penmount driver to work around an issue with the HID report descriptor. The descriptor does not contain the ContactID usage and as result the touchscreen is represented as normal mouse to the system. This driver maps the button 0 emitted by the touchscreen to BTN_TOUCH. This makes it possible to use touch events in userspace. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-04HID: thingm: fix workqueue race on removeJiri Kosina1-3/+3
thingm_remove_rgb() needs to flush the workqueue after all the LED classes have been unregistered, otherwise the removal might race with another LED event coming, causing thingm_led_set() to schedule additional work after thingm_remove_rgb() has flushed it. This obviously causes oops later, as the scheduled work has been freed in the meantime. In addition to that, move the hid_hw_stop() to an earlier place, so that dmesg is not polluted by failure messages about not being able to write the LED while the device is being shut down. Reported-and-tested-by: Dylan Alex Simon <dylan-kernel@dylex.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-04HID: hid-sensor-hub: re-add mistakenly removed USB_DEVICE_ID_STM_HID_SENSOR idSrinivas Pandruvada1-0/+3
Adding USB_DEVICE_ID_STM_HID_SENSOR again in the quirk table. During 3.16 merge cycle somehow quirk for device id USB_DEVICE_ID_STM_HID_SENSOR is missing. I see commit dde3b45cd74e ("HID: hid-sensor-hub: new device id and quirk for STM Sensor hub") added new id USB_DEVICE_ID_STM_HID_SENSOR_1, but didn't really delete the old device id. Anyway we need to add this back, otherwise it breaks ST sensor hubs. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-03HID: thingm: set the proper error code before leavingBenjamin Tissoires1-0/+1
In case of an unsupported firmware, the driver bails out without setting the LEDs interfaces, but forget to set the proper error code. err is then still equal to 0 and the hid subsytem consider the device to be in perfect shape. When removing it, thingm_remove() tries to unbind the rgb LEDs which has not been created, leading to a segfault. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-03HID: wacom: Add support for the Cintiq CompanionBenjamin Tissoires1-0/+10
The Wacom Cintiq Companion shares the same sensor than the Cintiq Companion Hybrid, with the exception of the different PIDs. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-03HID: usbhid: improve handling of Clear-Halt and resetAlan Stern1-25/+9
This patch changes the way usbhid carries out Clear-Halt and reset. Currently, after a Clear-Halt on the interrupt-IN endpoint, the driver immediately restarts the interrupt URB, even if the Clear-Halt failed. This doesn't work out well when the reason for the failure was that the device was disconnected (when a low- or full-speed device is connected through a hub to an EHCI controller, transfer errors caused by disconnection are reported as stalls by the hub). Instead now the driver will attempt a reset after a failed Clear-Halt. The way resets are carried out is also changed. Now the driver will call usb_queue_reset_device() instead of calling usb_reset_device() directly. This avoids a deadlock that would arise when a device is unplugged: The hid_reset() routine runs as a workqueue item, a reset attempt after the device has been unplugged will fail, failure will cause usbhid to be unbound, and the disconnect routine will try to do cancel_work_sync(). The usb_queue_reset_device() implementation is carefully written to handle scenarios like this one properly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-01HID: sony: Set the Sixaxis cable state correctlyFrank Praznik1-1/+2
Bit 3 in byte 31 of the Sixaxis report indicates whether the battery is charging or not charging as opposed to whether or not the cable is plugged in. As a result, when connected via USB and fully charged, the power_supply status is wrongly reported as 'Discharging' instead of 'Full'. Use the battery level value to set the cable state so that the power status is reported correctly as that seems to be the only reliable way to determine the cable status on the Sixaxis. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-27HID: picolcd: be more verbose when reporting report size errorJiri Kosina1-2/+2
picolcd device is not expected to send any report with size larger than 64 bytes. If this impossible event happens (sic!), print also a report ID to allow for easier debugging. Suggested-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-27HID: logitech-dj: break out testing of validity of dj_deviceBenjamin Tissoires1-24/+11
We can do once the test of the validity of the dj_device, which removes some duplicated code in various functions. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-27Merge branch 'for-linus' of ↵Linus Torvalds4-18/+42
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fixes for potential memory corruption problems in magicmouse and picolcd drivers (the HW would have to be manufactured to be deliberately evil to trigger those) which were found by Steven Vittitoe - fix for false error message appearing in dmesg from logitech-dj driver, from Benjamin Tissoires * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: picolcd: sanity check report size in raw_event() callback HID: magicmouse: sanity check report size in raw_event() callback HID: logitech-dj: prevent false errors to be shown
2014-08-27HID: picolcd: sanity check report size in raw_event() callbackJiri Kosina1-0/+6
The report passed to us from transport driver could potentially be arbitrarily large, therefore we better sanity-check it so that raw_data that we hold in picolcd_pending structure are always kept within proper bounds. Cc: stable@vger.kernel.org Reported-by: Steven Vittitoe <scvitti@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-27HID: magicmouse: sanity check report size in raw_event() callbackJiri Kosina1-0/+10
The report passed to us from transport driver could potentially be arbitrarily large, therefore we better sanity-check it so that magicmouse_emit_touch() gets only valid values of raw_id. Cc: stable@vger.kernel.org Reported-by: Steven Vittitoe <scvitti@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-26HID: input: force generic axis to be mapped to their user space axisBenjamin Tissoires1-0/+6
Atmel 840B digitizer presents a stylus interface which reports twice the X coordinate and then twice the Y coordinate. In its current implementation, hid-input assign the first X to X, then the second to Y, then the first Y to Z, then the second one to RX. This is wrong, and X should always be mapped to X, no matter what. A solution consists in forcing X, Y, Z, RX, RY, RZ to be mapped to their correct user space counter part. Reported-by: Éric Brunet <Eric.Brunet@lps.ens.fr> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-25HID: uhid: report to user-space whether reports are numberedDavid Herrmann1-1/+20
This makes UHID_START include a "dev_flags" field that describes details of the hid-device in the kernel. The first flags we introduce describe whether a given report-type uses numbered reports. This is useful for transport layers that force report-numbers and therefore might have to prefix kernel-provided HID-messages with the report-number. Currently, only HoG needs this and the spec only talks about "global report numbers". That is, it's a global boolean not a per-type boolean. However, given the quirks we already have in kernel-space, a per-type value seems much more appropriate. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-25HID: uhid: implement SET_REPORTDavid Herrmann1-68/+138
We so far lacked support for hid_hw_raw_request(..., HID_REQ_SET_REPORT); Add support for it and simply forward the request to user-space. Note that SET_REPORT is synchronous, just like GET_REPORT, even though it does not provide any data back besides an error code. If a transport layer does SET_REPORT asynchronously, they can just ACK it immediately by writing an uhid_set_report_reply to uhid. This patch re-uses the synchronous uhid-report infrastructure to query user-space. Note that this means you cannot run SET_REPORT and GET_REPORT in parallel. However, that has always been a restriction of HID and due to its blocking nature, this is just fine. Maybe some future transport layer supports parallel requests (very unlikely), however, until then lets not over-complicate things and avoid request-lookup-tables. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-25HID: uhid: rename uhid_raw_request to uhid_hid_raw_requestDavid Herrmann1-16/+16
We use strict prefixed in uhid.c: uhid_char_*: implement char-dev callbacks uhid_dev_*: implement uhid device management and runtime uhid_hid_*: implement hid-dev callbacks uhid_raw_request is an hid callback, so rename it to uhid_hid_raw_request. While at it, move it closer to it's extracted helpers and keep the same order as in "struct hid_driver". Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-25HID: uhid: add ABI compatible UHID_GET_REPORT replacing UHID_FEATUREDavid Herrmann1-14/+14
The old hdev->hid_get_raw_report() was broken by design. It was never clear what kind of HW request it should trigger. Benjamin fixed that with the core HID cleanup, though we never really adjusted uhid. Unfortunately, our old UHID_FEATURE command was modelled around the broken hid_get_raw_report(). We converted it silently to the new GET_REPORT and nothing broke. Make this explicit by renaming UHID_FEATURE to UHID_GET_REPORT and UHID_FEATURE_ANSWER to UHID_GET_REPORT_REPLY. Note that this is 100% ABI compatible to UHID_FEATURE. This is just a rename. But we have to keep the old definitions around to not break API. >From now on, UHID_GET_REPORT must trigger a GET_REPORT request on the user-space hardware layer. All the ambiguity due to the weird "feature" name should be gone now. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-25HID: uhid: invert report_done and make non-atomicDavid Herrmann1-8/+7
All accesses to @report_done are protected by qlock (or report-contexts). No need to use an atomic. While at it, invert the logic and call it "report_running". This is similar to the uhid->running field and easier to read. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-25HID: uhid: turn report_id into u32David Herrmann1-3/+4
All accesses to @report_id are protected by @qlock. No need to use an atomic. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-04 10:49:20 +0000