summaryrefslogtreecommitdiffstats
path: root/drivers/hid/hid-wacom.c
AgeCommit message (Collapse)AuthorFilesLines
2012-10-01Merge branch 'upstream' into for-linusJiri Kosina1-1/+0
Conflicts: drivers/hid/usbhid/hid-quirks.c
2012-09-19HID: wacom: Fix wacom_probe error handlingAxel Lin1-9/+14
OLEDs/LED are not critical for tablet functioning thus ignore OLED/LED initialisation failures. This patch does clean up all the sysfs attribute files in error paths. Signed-off-by: Axel Lin <axel.lin@gmail.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-05HID: remove Paul Walmsley's copyright from places where it shouldn't beJiri Kosina1-1/+0
Paul Walmsley has implemented dynamic quirk handling back in 2007 through commits: 2eb5dc30eb ("USB HID: encapsulate quirk handling into hid-quirks.c") 8222fbe67c ("USB HID: clarify static quirk handling as squirks") 8cef908235 ("USB HID: add support for dynamically-created quirks") 876b9276b9 ("USB HID: add 'quirks' module parameter") and as such, his copyright rightly belongs to drivers/hid/usbhid/hid-quirks.c file. However when generic HID code has been converted to bus and individual quirks separated out to individual drivers on the bus, the copyright has been blindly transfered into all the tiny drivers, which actually don't contain any of Pauls' copyrighted code. Remove the copyright from those sub-drivers. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Paul Walmsley <paul@pwsan.com>
2012-08-15HID: wacom: OLEDs control over sysfs for Intuos4Przemo Firszt1-0/+143
Thsi patch adds ability to control OLED micro displays on Wacom Intuos4 Wireless. The OLEDS are exposed as /sys/class/hidraw/hidraw*/device/oled{No]_img where No. is 0 to 7 Setting an image: dd bs=256 if=img_file of=/sys/class/hidraw/hidraw{No}/device/oled0_img The image has to contain 256 bytes (64x32px 1 bit). More detailed description in Documentation/ABI/testing/sysfs-driver-wacom Signed-off-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-08-15HID: wacom: Use half of brightness for low statePrzemo Firszt1-1/+2
Intuos4 WL leds have 2 states: high and low. With no activity tablet uses low state; using pen triggers high state. Both can be set independently, but it would require setting another led device to control them separately. This patch uses the brightness set through leds subsytem as high and half of that value as low. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-16HID: wacom: Unify speed settingPrzemo Firszt1-55/+47
This patch unifies speed setting for both supported tablets. Functionality of "wacom_poke" (used only by Graphire) is now in "wacom_set_features". Reporting speed for both tablets can be changed by somethinkg like: echo 1 > /sys/class/bluetooth/hci0/hci0:1/{device No}/speed Accepted values: 0 - low speed, 1 - high speed. The way of changing reporting speed is the same for Graphire and Intuos4 WL. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-16HID: wacom: Add speed setting for Intuos4 WLPrzemo Firszt1-4/+13
Add option to change reporting speed for Intuos4 WL. The option is only internal to the module, but it will be extended to allow control over sysfs, as it is already implemented for Graphire. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-16HID: wacom: Move Graphire raport header check.Przemo Firszt1-5/+7
That check is valid only for Wacom Graphire, as the device raports always start with 0x03. Intuos4 WL high-speed raports begin with 0x04, so the check would be filtering out valid reports. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-11HID: wacom: Add LED selector control for Wacom Intuos4 WLPrzemo Firszt1-0/+126
Add sysfs attribute to control LED selector on Wacom Intuos4. There are 4 different LEDs on the tablet and they can be turned on by something like: echo 50 > /sys/class/leds/(device # here)\:selector\:1/brightness Only one can be lit at a time. The brightness range is 0 to 127. This patch also contains short ABI description. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-07HID: wacom: Add tilt reporting for Intuos4 WLPrzemo Firszt1-0/+7
Tile is reported to input subsystem as reported by the device without any modifications. It means that tilt X/Y range is 0 to 127 and it's not centered on zero. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-29HID: wacom: Add module descriptionPrzemo Firszt1-1/+1
Add description for hid-wacom module: "Driver for Wacom Graphire Bluetooth and Wacom Intuos4 WL" Signed-off-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-28HID: wacom: Add battery/ac reporting for Intuos4 WLPrzemo Firszt1-0/+10
This patch adds battery/ac reporting for Intuos4 WL. It uses existing sysfs code, but the device reports battery capacity in more fine-grained way, so there has to be a separate lookup table (called batcap_i4). Signed-off-by: Przemo Firszt <przemo@firszt.eu> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-28HID: wacom: Refactor battery/ac reporting for GraphirePrzemo Firszt1-17/+17
This patch doesn't change the way battery/ac is reported, but the changes are required to facilitate battery reporting for Intuos4 WL. wdata->battery_capacity now stores actual battery capacity as opposed to raw value reported by wacom graphire previously. Power supply state is now stored in a separate variable - it used to be calculated on-the-fly in wacom_ac_get_property function. The raw value has to be stored as well to be able to determine if it has changed. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-28HID: wacom: Remove CONFIG_HID_WACOM_POWER_SUPPLY optionPrzemo Firszt1-16/+0
This option was ment as a safety mechanism in case the system treats the wacom tablet battery as the main power supply. It's no longer required as now we can distinguish between system power supply and device power supply. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-20Merge branch 'upstream' into for-linusJiri Kosina1-0/+1
Conflicts: drivers/hid/Makefile
2012-03-16HID: wacom: Add reporting of wheel for Intuos4 WLPrzemo Firszt1-0/+24
This patch adds reporting of ABS_WHEEL event. Raported walues are 0..71 and are related to absolute location of the finger on the wheel. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-16HID: wacom: Replace __set_bit with input_set_capabilityPrzemo Firszt1-3/+1
It's a trivial patch. It's doesn't change the functionality as the helper input_set_capability does the same thing. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-12HID: wacom: Reset stylus buttons - Intuos4 WLPrzemo Firszt1-0/+2
Stylus buttons have to be resetted when going out-of-prox. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-01HID: wacom: Add pad buttons reporting on Intuos4 WLPrzemo Firszt1-1/+35
This patch adds reporting of 1 wheel button and 8 strip buttons for Intuos4 WL. The buttons are reported as BTN_0 to BTN_9. The change of type butstate variable is required as the old type 'char' couldn't store state of 9 buttons. The change is not affecting Graphire tablet as it only uses first 2 bits of 'butstate'. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Acked-by：Ping Cheng <pinglinux@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-01HID: wacom: report distance for Intuos4 WLPrzemo Firszt1-0/+4
This patch adds reporting of distance of tool to the tablet surface. Maximum reported value is 63 (0x3F). Signed-off-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-27HID: wacom: Add serial and id reporting for Wacom Intuos4 WLPrzemo Firszt1-6/+15
This patch implements reporting id and serial number of used tool. Reported values are the same as for USB on of the driver for wacom Intuos4 WL Signed-off-by: Przemo Firszt <przemo@firszt.eu> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-27HID: wacom: set ABS_MISC bit for Intuos4 WLPrzemo Firszt1-0/+1
ABS_MISC has to be set for Intuos4 WL otherwise xorg driver won't use proper protocol and the information about tool id and serial is lost. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-21HID: wacom: fix proximity tool releasePrzemo Firszt1-1/+1
Don't zero the current tool before reporting its release to the input subsystem. Signed-off-by: Aristeu Rozanski <aris@redhat.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-21HID: wacom: Force new name for Wacom Intuos4 WL PTK-540WLPrzemo Firszt1-0/+1
The name reported by Inutos4 WL connected by bluetooth is "PTK-540WL" and to make it consistent with other Wacom devices it has to be converted to "Wacom Intuos4 WL". It also makes userland applications aware that it's a Wacom device. This aligns naming of device to same used when this device is plugged into USB port and controlled by USB wacom driver; and thus helps align userland logic to route to apps like xf86-input-wacom. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-06HID: wacom: Fix invalid power_supply_powers callsPrzemo Firszt1-3/+4
power_supply_powers calls added in 35b4c01e2 ("power_supply: add "powers" links to self-powered HID devices") have to be called after power device is created. This patch also fixes the second call - it has to be "ac" instead of "battery" Signed-off-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-11Merge git://git.infradead.org/battery-2.6Linus Torvalds1-2/+14
* git://git.infradead.org/battery-2.6: (68 commits) power_supply: Mark da9052 driver as broken power_supply: Drop usage of nowarn variant of sysfs_create_link() s3c_adc_battery: Average over more than one adc sample power_supply: Add DA9052 battery driver isp1704_charger: Fix missing check jz4740-battery: Fix signedness bug power_supply: Assume mains power by default sbs-battery: Fix devicetree match table ARM: rx51: Add bq27200 i2c board info sbs-battery: Change power supply name devicetree-bindings: Propagate bq20z75->sbs rename to dt bindings devicetree-bindings: Add vendor entry for Smart Battery Systems sbs-battery: Rename internals to new name bq20z75: Rename to sbs-battery wm97xx_battery: Use DEFINE_MUTEX() for work_lock max8997_charger: Remove duplicate module.h lp8727_charger: Some minor fixes for the header lp8727_charger: Add header file power_supply: Convert drivers/power/* to use module_platform_driver() power_supply: Add "unknown" in power supply type ...
2011-12-09power_supply: add "powers" links to self-powered HID devicesJeremy Fitzhardinge1-0/+4
Make the relationship between the Wiimote and Wacom self-powered HID devices and their power supply explicit by adding a "powers" link. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Jiri Kosina <jkosina@suse.cz>
2011-12-09power_supply: add scope properties to some self-powered HID devicesJeremy Fitzhardinge1-2/+10
The Wacom and Wiimote HID drivers register power supplies for themselves to indicate their battery levels. Make those power supplies device scope. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Jiri Kosina <jkosina@suse.cz>
2011-11-13HID: wacom: Initial driver for Wacom Intuos4 Wireless (Bluetooth)Przemo Firszt1-7/+135
This is very basic driver for Wacom Intuos4 Wireless tablet. It supports only position, pressure and pen buttons. More features will be added in the future. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Ping Cheng <pinglinux@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-13HID: wacom: Move parsing to a separate functionPrzemo Firszt1-16/+23
This patch doesn't change the way driver works. Parsing logic is now in a separate function. It's a first step to add Intuos4 Wireless support to hid-wacom driver. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Ping Cheng <pinglinux@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-25Merge branch 'upstream-fixes' into for-linusJiri Kosina1-38/+43
Conflicts: drivers/hid/hid-wacom.c
2011-10-08HID: wacom: Set input bits before registrationDavid Herrmann1-35/+41
We shouldn't change the event flags of input devices after they get registered. Otherwise, udev will not get notified of these flags and cannot setup the devices properly. This fixes the probing to set the input event flags on the input_mapped callback instead of the probe function. Reported-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-16Merge branch 'for-linus' of git://github.com/dtor/inputLinus Torvalds1-0/+2
* 'for-linus' of git://github.com/dtor/input: Input: wacom - fix touch parsing on newer Bamboos Input: bcm5974 - add MacBookAir4,1 trackpad support Input: wacom - add POINTER and DIRECT device properties Input: adp5588-keys - remove incorrect modalias Input: cm109 - fix checking return value of usb_control_msg Input: wacom - advertise BTN_TOOL_PEN and BTN_STYLUS for PenPartner Input: wacom - remove pressure for touch devices
2011-09-08Input: wacom - add POINTER and DIRECT device propertiesJason Gerecke1-0/+2
Adds INPUT_PROP_POINTER or INPUT_PROP_DIRECT as necessary to the hardware supported by the Wacom driver. The DIRECT property is assigned to devices with an embedded screen (i.e. touchscreens and display tablets). The POINTER property is assigned to those without embedded screens. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-07HID: wacom: Unregister sysfs attributes on removeDavid Herrmann1-0/+1
HID devices can be hotplugged so we should unregister all sysfs attributes when removing a driver. Otherwise, manually unloading the wacom-driver will not remove the sysfs attributes. Only when the device is disconnected, they are removed, eventually. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-07HID: wacom: Fix error path of power-supply initializationDavid Herrmann1-12/+9
power_supply_unregister() must not be called if power_supply_register() failed. The wdata->psy.dev pointer may point to invalid memory after a failed power_supply_register() and hence wacom_remove() will fail while calling power_supply_unregister(). This changes the wacom_probe function to fail if it cannot register the power_supply devices. If we would want to keep the previous behaviour we had to keep some flag about the power_supply state and check it on wacom_remove, but this seems inappropriate here. Hence, we simply fail, too, if power_supply_register fails. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-10HID: Add and use hid_<level>: dev_<level> equivalentsJoe Perches1-12/+14
Neaten current uses of dev_<level> by adding and using hid specific hid_<level> macros. Convert existing uses of dev_<level> uses to hid_<level>. Convert hid-pidff printk uses to hid_<level>. Remove err_hid and use hid_err instead. Add missing newlines to logging messages where necessary. Coalesce format strings. Add and use pr_fmt(fmt) KBUILD_MODNAME ": " fmt Other miscellaneous changes: Add const struct hid_device * argument to hid-core functions extract() and implement() so hid_<level> can be used by them. Fix bad indentation in hid-core hid_input_field function that calls extract() function above. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-18HID: wacom: make sysfs permissions more strictJiri Kosina1-1/+1
It's not really dangerous in this driver, but it's against general practice and worth fixing. Wacom uses the attribute for changing the reporting speed of the tablet (and this actually requires poking the device in the background) (still I wouldn't consider it a security issue though). udev is a proper place to handle this. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-10Merge branch 'for-linus' of ↵Linus Torvalds1-25/+24
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add USB-ID for PL-3601 Xbox 360 pad Input: cy8ctmg100_ts - signedness bug Input: elantech - report position also with 3 fingers Input: elantech - discard the first 2 positions on some firmwares Input: adxl34x - do not mark device as disabled on startup Input: gpio_keys - add hooks to enable/disable device Input: evdev - rearrange ioctl handling Input: dynamically allocate ABS information Input: switch to input_abs_*() access functions Input: add static inline accessors for ABS properties
2010-08-02Input: switch to input_abs_*() access functionsDaniel Mack1-25/+24
Change all call sites in drivers/input to not access the ABS axis information directly anymore. Make them use the access helpers instead. Also use input_set_abs_params() when possible. Did some code refactoring as I was on it. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-20Revert "HID: add support for the Wacom Intuos 4 wireless"Jiri Kosina1-1/+1
This reverts commit ed9eac5b493c679ef5fc52273758fe334de82714. As reported by Bastien Nocera, the device actually uses a completely different protocol, so simply adding VID/PID doesn't work and completely new driver will need to be written. Reported-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-19Merge branch 'upstream' into for-linusJiri Kosina1-25/+204
Conflicts: drivers/hid/hid-wacom.c
2010-04-21HID: wacom: remove annoying non-error printkCory Fields1-1/+0
This is the only line printed on my "quiet" boot and seems completely unnecessary. Signed-off-by: Cory Fields <FOSS@AtlasTechnologiesInc.com> Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-04-21HID: add support for the Wacom Intuos 4 wirelessBastien Nocera1-1/+1
Same command set as the Graphire Bluetooth tablet. Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-22HID: add sysfs speed attribute for wacom bluetooth tabletPrzemo Firszt1-1/+39
The attribute allows to change reporting speed of tablet from userspace through sysfs file. The attribute is RW, valid values: 0 is low speed, 1 is high speed. High speed is the default setting. Using low speed is a workaround if you experience lag when using the tablet. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-22HID: separate mode switching function for wacom bluetooth driverPrzemo Firszt1-26/+40
wacom_poke function allows to switch tablet reporting speed. The patch dosen't add any new functionality, but it's preparation for user-space speed switching through sysfs. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-16HID: expose wacom pen tablet battery through power_supply classPrzemo Firszt1-0/+127
This patch exposes wacom pen tablet battery capacity and ac state thru power_supply class is sysfs. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-03HID: make Wacom modesetting failures non-fatalJiri Kosina1-8/+9
With Wacom tablet mode-setting moved from userspace into kernel, we don't have to consider failures of device queries through the _raw callback as hard failure, as the driver can safely continue anyway. This is consistent with the current USB driver in wacom_sys.c Reported-by: Ping Cheng <pinglinux@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-03HID: Implement Wacom quirk in the kernelBastien Nocera1-0/+27
The hid-wacom driver required user-space to poke at the tablet to make it send data about the cursor location. This patch makes it do the same thing but in the kernel. Signed-off-by: Bastien Nocera <hadess@hadess.net> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 00:30:52 +0000