summaryrefslogtreecommitdiffstats
path: root/drivers/hid/hid-sensor-hub.c
AgeCommit message (Collapse)AuthorFilesLines
2020-11-05HID: hid-sensor-hub: Fix issue with devices with no report IDPablo Ceballos1-1/+2
Some HID devices don't use a report ID because they only have a single report. In those cases, the report ID in struct hid_report will be zero and the data for the report will start at the first byte, so don't skip over the first byte. Signed-off-by: Pablo Ceballos <pceballos@google.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-22HID: do not call hid_set_drvdata(hdev, NULL) in driversBenjamin Tissoires1-1/+0
This is a common pattern in the HID drivers to reset the drvdata. Some do it properly, some do it only in case of failure. But, this is actually already handled by driver core, so there is no need to do it manually. [for hid-sensor-hub.c] Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [For hid-picolcd_core.c] Acked-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 335Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 111 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.567572064@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-16iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbersHans de Goede1-3/+10
Before this commit sensor_hub_input_attr_get_raw_value() failed to take the signedness of 16 and 8 bit values into account, returning e.g. 65436 instead of -100 for the z-axis reading of an accelerometer. This commit adds a new is_signed parameter to the function and makes all callers pass the appropriate value for this. While at it, this commit also fixes up some neighboring lines where statements were needlessly split over 2 lines to improve readability. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-05HID: sensor-hub: Restore fixup for Lenovo ThinkPad Helix 2 sensor hub reportHans de Goede1-0/+23
Commit b0f847e16c1e ("HID: hid-sensor-hub: Force logical minimum to 1 for power and report state") not only replaced the descriptor fixup done for devices with the HID_SENSOR_HUB_ENUM_QUIRK with a generic fix, but also accidentally removed the unrelated descriptor fixup for the Lenovo ThinkPad Helix 2 sensor hub. This commit restores this fixup. Restoring this fixup not only fixes the Lenovo ThinkPad Helix 2's sensors, but also the Lenovo ThinkPad 8's sensors. Fixes: b0f847e16c1e ("HID: hid-sensor-hub: Force logical minimum ...") Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Fernando D S Lima <fernandodsl@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-1/+2
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-09HID: hid-sensor-hub: Force logical minimum to 1 for power and report stateSrinivas Pandruvada1-94/+0
In the reference HID sensor hub firmware all Named array enums were 0-based. There is no description of the default base of enums in HID sensor hub specification as logical minimum should have set this base value. Every sensor hub implemented enum as 1-based, without explicitly setting logical minimum to 1, because of the implementation by one of the major OS vendor. In Linux we used logical minimum to decide the enum base. Some sensor hub FWs already changed logical minimum from 0 to 1. We hoped that every other vendor will follow. But that didn't happen and we had to fix the report header for every sensor hub to change logical minimum to 1 by using .report_fixup() callback. So for every new sensor hub we had to modify source code by adding this quirk based on the vendor and device id. This is becoming a maintenance burden. This patch hardcodes the logical minimum of power and report state attributes to 1. In this way we can remove the existing quirks and also we don't have to add more quirks. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-02HID: sensor-hub: Move the memset to sensor_hub_get_feature()Srinivas Pandruvada1-1/+2
While applying patch d443a0aa3a29: "HID: hid-sensor-hub: clear memory to avoid random data", there was some issues in applying correct version of the patch. This resulted in the breakage of sensor functions as all request like power-up will be reset by the memset() in the function sensor_hub_set_feature(). The reset of caller buffer should be in the function sensor_hub_get_feature(), not in the sensor_hub_set_feature(). Fixes: d443a0aa3a29 ("HID: hid-sensor-hub: clear memory to avoid random data") Cc: Stable <stable@vger.kernel.org> # 4.9+ Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-28HID: sensor-hub: add quirk for Microchip MM7150Benjamin Tissoires1-0/+3
One more device requiring a quirk :/ Reported-by: Christian-Nils Boda <christian-nils.boda@gadz.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-28HID: sensor-hub add quirk for Microsoft Surface 3Benjamin Tissoires1-0/+3
One more device requiring a quirk :/ [jkosina@suse.cz: update comment based on Bastien's remark] Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-23HID: hid-sensor-hub: clear memory to avoid random dataSong Hongyan1-0/+1
When user tried to read some fields like hysteresis from IIO sysfs on some systems, it fails. The reason is that this field is a byte field and caller of sensor_hub_get_feature() passes a buffer of 4 bytes. Here the function sensor_hub_get_feature() copies the single byte from the report to the caller buffer and returns "1" as the number of bytes copied. So caller can use the return value. But this is done by multiple callers, so if we just change the sensor_hub_get_feature so that caller buffer is initialized with 0s then we don't to change all functions. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-03HID: sensor-hub: Fix packing of result buffer for feature reportSrinivas Pandruvada1-1/+14
When report count is more than one and report size is not 4 bytes, then we need some packing into result buffer from the caller of function sensor_hub_get_feature. By default the value extracted from a field is 4 bytes from hid core (using hid_hw_request(hsdev->hdev, report, HID_REQ_GET_REPORT)), even if report size if less than 4 byte. So when we copy data to user buffer in sensor_hub_get_feature, we need to only copy report size bytes even when report count is more than 1. This is not an issue for most of the sensor hub fields as report count will be 1 where we already copy only report size bytes, but some string fields like description, it is a problem as the report count will be more than 1. For example: Field(6) Physical(Sensor.OtherCustom) Application(Sensor.Sensor) Usage(11) Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Report Size(16) Report Count(11) Here since the report size is 2 bytes, we will have 2 additional bytes of 0s copied into user buffer, if we directly copy to user buffer from report->field[]->value This change will copy report size bytes into the buffer of caller for each usage report->field[]->value. So for example without this change, the data displayed for a custom sensor field "sensor-model": 76 00 101 00 110 00 111 00 118 00 111 (truncated to report count of 11) With change 76 101 110 111 118 111 32 89 111 103 97 ("Lenovo Yoga" in ASCII ) Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-17HID: hid-sensor-hub: Add ISH quirkSrinivas Pandruvada1-0/+4
Need enum quirk to change the base of enums to 1 for power and report descriptors. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-01-20Merge tag 'asm-generic-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "The asm-generic tree this time contains one series from Nicolas Pitre that makes the optimized do_div() implementation from the ARM architecture available to all architectures. This also adds stricter type checking for callers of do_div, which has uncovered a number of bugs in existing code, and fixes up the ones we have found" * tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: ARM: asm/div64.h: adjust to generic codde __div64_32(): make it overridable at compile time __div64_const32(): abstract out the actual 128-bit cross product code do_div(): generic optimization for constant divisor on 32-bit machines div64.h: optimize do_div() for power-of-two constant divisors mtd/sm_ftl.c: fix wrong do_div() usage drm/mgag200/mgag200_mode.c: fix wrong do_div() usage hid-sensor-hub.c: fix wrong do_div() usage ti/fapll: fix wrong do_div() usage ti/clkt_dpll: fix wrong do_div() usage tegra/clk-divider: fix wrong do_div() usage imx/clk-pllv2: fix wrong do_div() usage imx/clk-pllv1: fix wrong do_div() usage nouveau/nvkm/subdev/clk/gk20a.c: fix wrong do_div() usage
2016-01-08HID: sensor-hub: Add quirk for Lenovo Yoga 900 with ITE ChipsSrinivas Pandruvada1-0/+3
This needs same quirk as applied to other YOGA sensor hubs. Refer to commit 21589ebda681 ("HID: sensor-hub: Add in quirk for Lenovo Yogas with ITE") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-16hid-sensor-hub.c: fix wrong do_div() usageNicolas Pitre1-1/+2
do_div() must only be used with a u64 dividend. Signed-off-by: Nicolas Pitre <nico@linaro.org>
2015-11-06Merge branches 'for-4.3/upstream-fixes', 'for-4.4/corsair', ↵Jiri Kosina1-4/+4
'for-4.4/dragonrise', 'for-4.4/i2c-hid', 'for-4.4/logitech', 'for-4.4/microsoft', 'for-4.4/multitouch', 'for-4.4/roccat-sysfs-deprecation', 'for-4.4/upstream' and 'for-4.4/wacom' into for-linus
2015-10-21HID: fix some indenting issuesJiri Slaby1-4/+4
Some drivers indent some lines in a very weird manner. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-10-05HID: sensor-hub: Add quirk for Lenovo Yoga 2 with ITE ChipsRitesh Raj Sarraf1-0/+3
This patch is a follow-up to 47eeca8a48 (" HID: sensor-hub: Add in quirk for Lenovo Yogas with ITE") The Lenovo Yoga 2 13 seems to be sold in multiple variants with minor difference3s. IN my case, the USB ID for ITE chip is different than the Yoga 2 11 and Yoga 3 14. Without the quirk, no data is received from the accelerometer. I have verified the patch, testing this on 4.3-rc4 (and 4.2 stable). With this patch, proper orientation data is received. rrs@learner:~/Community/UpstreamSources/linux-upstream_GIT (stable-42)$ monitor-sensor ** Message: Accelerometer orientation changed: bottom-up ** Message: Light changed: 0.000000 (lux) ±** Message: Accelerometer orientation changed: left-up ** Message: Accelerometer orientation changed: bottom-up ** Message: Accelerometer orientation changed: left-up ** Message: Accelerometer orientation changed: normal ** Message: Light changed: 29.999999 (lux) monitor-sensor can be found in the iio-sensor-proxy tool. Signed-off-by: Ritesh Raj Sarraf <rrs@debian.org> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-04HID: sensor-hub: Fixup for Lenovo ThinkPad Helix 2 sensor hub reportFernando D S Lima1-0/+14
There is an error in the report descriptor of the Thinkpad Helix 2 where logical minimum value (557376) is greater than logical maximum (491200) for all of the magnetic flux axis data fields. This error results in a report descriptor parsing failure that causes the sensors attached to the hub not to be detected. dmesg excerpt: [ 19.866905] drivers/hid/hid-core.c: logical range invalid 0x88140 0x77ec0 [ 19.866914] hid-sensor-hub 0018:2047:0855.0007: item 0 1 0 8 parsing failed [ 19.866926] hid-sensor-hub 0018:2047:0855.0007: parse failed [ 19.866933] hid-sensor-hub: probe of 0018:2047:0855.0007 failed with error -22 Add a report fixup to change magnetic flux logical minimums to -557376 for the parsing to succeed and the sensors to get detected. After applying the fix the sensors get detected, with corresponding drivers (hid-accel-3d,hid-gyro-3d,etc) loaded, and its possible to read their values. Signed-off-by: Fernando D S Lima <fernandodsl@gmail.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-07-08HID: sensor-hub: Add in quirk for Lenovo Yogas with ITEGuilhem Lettron1-0/+3
Like yogas with TEXAS_INSTRUMENTS, yogas with ITE chips needs to be initialized with enumeration quirks. Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-05-12HID: hid-sensor-hub: Fix debug lock warningSrinivas Pandruvada1-3/+10
When CONFIG_DEBUG_LOCK_ALLOC is defined, mutex magic is compared and warned for (l->magic != l), here l is the address of mutex pointer. In hid-sensor-hub as part of hsdev creation, a per hsdev mutex is initialized during MFD cell creation. This hsdev, which contains, mutex is part of platform data for the a cell. But platform_data is copied in platform_device_add_data() in platform.c. This copy will copy the whole hsdev structure including mutex. But once copied the magic will no longer match. So when client driver call sensor_hub_input_attr_get_raw_value, this will trigger mutex warning. So to avoid this allocate mutex dynamically. This will be same even after copy. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-13Merge branch 'for-4.1/sensor-hub' into for-linusJiri Kosina1-74/+124
Conflicts: drivers/iio/common/hid-sensors/hid-sensor-trigger.c include/linux/hid-sensor-hub.h
2015-03-16HID: hid-sensor-hub: Fix sparse warningSrinivas Pandruvada1-2/+2
Since I can't change the type of hid_set_field argument 3, using __force __s32 to remove this warning. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-16HID: hid-sensor-hub: fix attribute read for logical usage idSrinivas Pandruvada1-2/+4
For defining enumeration values like report or power status events, the enumeration usage ids are enclosed in a logical collection. In this case we need to match logical usage id for pending read on this usage id. For example, in the below field, when read is requested for 0319, the report will contain one of the status usages like 850, 851 etc. In this case the raw event will not match 0319. So when logical collection matches, then wake up the pending thread. Physical(Sensor.OtherCustom) Logical(Sensor.0319) Application(Sensor.Sensor) Usage(6) Sensor.0850 Sensor.0851 Sensor.0852 Sensor.0853 Sensor.0854 Sensor.0855 Logical Minimum(1) Logical Maximum(5) Report Size(8) Report Count(1) Report Offset(24) Flags( Array Absolute ) Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-23HID: hid-sensor-hub: Enhance feature report set APISrinivas Pandruvada1-2/+20
Current API only allows setting one offset in the field. This API is extended to set multiple offsets in the field report. Also update parameters in the users of this API. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-23HID: hid-sensor-hub: Enhance get feature report APISrinivas Pandruvada1-2/+13
Some hid sensor feature report can contain more than one reports. This API can now support receiving multiple values from the feature report. Also update the parameters in the users of this API. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-23HID: hid-sensor-hub: Extend API for async readsSrinivas Pandruvada1-30/+35
Add additional flag to read in async mode. In this mode the caller will get reply via registered callback for capture_sample. Callbacks can be registered using sensor_hub_register_callback function. The usage id parameter of the capture_sample can be matched with the usage id of the requested attribute. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-23HID: hid-sensor-hub: Add support for application collectionSrinivas Pandruvada1-4/+26
Section 4.2.5 of HID Sensor hub specification allows two methods defining sensor devices. - Each sensor device by its own collection - A top level application collection object, including multiple sensors. In the first method, each sensor can be in its own sensor application collection without a physical collection. In the second method there is a usage id for collection type, which is defined as an application collection, with multiple physical collections in it. It is possible to define fusion sensor with this and may have its own handler. If there is a callback registered for the collection type, then forward all reports for sensors in its collection to this handler. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-23HID: hid-sensor-hub: Allow parallel synchronous readsSrinivas Pandruvada1-49/+41
Current implementation only allows one outstanding synchronous read. This is a performance hit when user mode is requesting raw reads of sensor attributes on multiple sensors together. This change changes the mutex lock to per hid sensor hub device instead of global lock. Although request to hid sensor hub is serialized, there can be multiple outstanding read requests pending for responses via hid reports. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-17HID: sensor-hub: correct dyn_callback_lock IRQ-safe changeSrinivas Pandruvada1-3/+5
Commit 0ccf091d1fbc1f99bb7f93bff8cf346769a9b0cd ("HID: sensor-hub: make dyn_callback_lock IRQ-safe) was supposed to change locks in sensor_hub_get_callback(), but missed. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-25HID: hid-sensor-hub: Use mfd_add_hotplug_devices() helperJohan Hovold1-5/+3
Use mfd_add_hotplug_devices() helper to register the subdevices. Compile-only tested. Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-04HID: hid-sensor-hub: re-add mistakenly removed USB_DEVICE_ID_STM_HID_SENSOR idSrinivas Pandruvada1-0/+3
Adding USB_DEVICE_ID_STM_HID_SENSOR again in the quirk table. During 3.16 merge cycle somehow quirk for device id USB_DEVICE_ID_STM_HID_SENSOR is missing. I see commit dde3b45cd74e ("HID: hid-sensor-hub: new device id and quirk for STM Sensor hub") added new id USB_DEVICE_ID_STM_HID_SENSOR_1, but didn't really delete the old device id. Anyway we need to add this back, otherwise it breaks ST sensor hubs. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-12HID: hid-sensor-hub: use devm_ functions consistentlyHimangi Saraogi1-22/+11
Use devm_kzalloc for all calls to kzalloc and not just the first. Use devm functions for other allocations as well. The calls to free the allocated memory in the probe and remove functions are done away with and a label is removed in the probe function. The semantic match that finds the inconsistency is as follows: // <smpl> @@ @@ *devm_kzalloc(...) ... *kzalloc(...) // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-30HID: sensor-hub: fix potential memory leakJiri Slaby1-0/+1
hsdev is not freed in sensor_hub_probe when kasprintf inside the for loop fails. This is because hsdev is not set to platform_data yet (to be freed by the code in the err_no_mem label). So free the memory explicitly in the 'if' branch, as this is the only place where this is (and will) be needed. Reported-by: coverity Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-10HID: sensor-hub: make dyn_callback_lock IRQ-safeJiri Kosina1-10/+14
dyn_callback_lock is being taken from IRQ context through hid_irq_in() -> hid_input_report() -> sensor_hub_raw_event() -> sensor_hub_get_callback(), therefore anyone else acquiring it needs to disable IRQs to disable deadlocks. Reported-by: Alexander Holler <holler@ahsoftware.de> Tested-by: Alexander Holler <holler@ahsoftware.de> Reported-by: Reyad Attiyat <reyad.attiyat@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-04Merge branches 'for-3.15/upstream-fixes' and 'for-3.16/upstream' into for-linusJiri Kosina1-1/+10
Conflicts: drivers/hid/hid-sensor-hub.c
2014-06-02HID: hid-sensor-hub: new device id and quirk for STM Sensor hubArchana Patni1-0/+3
Added STM sensor hub new device id. Also added this new device in HID_SENSOR_HUB_ENUM_QUIRK to fix report descriptors. These devices uses old FW which uses logical 0 as minimum. In these, HID reports are not using proper collection classes. So we need to fix report descriptors,for such devices. This will not have any impact, if the FW uses logical 1 as minimum. Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-28HID: hid-sensor-hub: Set report quirk for Microsoft SurfaceReyad Attiyat1-0/+9
Add the Microsoft Surface Pro 2 Type/Touch and default device hardware ID's Set report quirk for the device in hid-sensor-hub Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-06HID: sensor-hub: Add in quirk for sensor hub in Lenovo Ideapad YogasPeter F. Patel-Schneider1-0/+3
The sensor hub in Lenovo Yogas needs the enumeration quirk. I've been running the patch for over a month with no problems, whereas the unpatched drivers reliably mis-initialized the sensors. Signed-off-by: Peter F. Patel-Schneider <pfpschneider@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-03HID: sensor-hub: add sensor hub quirk for ThinkPad HelixStephen Chandler Paul1-2/+5
Just like some of the other laptops/tablets on the market with ultrabook sensors, the ThinkPad Helix's sensor hub requires a special quirk in order for it to power on properly. Without it the sensors are detected by the kernel and set up as usual, but they won't output any data. This will also fix the sensors on any other laptops with the same model of sensor hub. Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-01Merge branch 'for-3.15/hid-sensor-hub' into for-linusJiri Kosina1-86/+124
2014-03-25HID: hid-sensor-hub: fix sleeping function called from invalid contextSrinivas Pandruvada1-4/+3
Fix issue with the sleeping calling hid_hw_request under spinlock. When i2c is used as HID transport, this is calling kmalloc, which can sleep. So remove call to this function while under spinlock. [ 1067.021961] Call Trace: [ 1067.021970] [<ffffffff8192f5f2>] dump_stack+0x4d/0x6f [ 1067.021976] [<ffffffff811109f2>] __might_sleep+0xd2/0xf0 [ 1067.021981] [<ffffffff811ea15b>] __kmalloc+0xeb/0x200 [ 1067.021989] [<ffffffff816e0cb3>] ? hid_alloc_report_buf+0x23/0x30 [ 1067.021993] [<ffffffff816e0cb3>] hid_alloc_report_buf+0x23/0x30 [ 1067.021997] [<ffffffff816f4cb7>] i2c_hid_request+0x57/0x110 [ 1067.022006] [<ffffffffa02bc61c>] sensor_hub_input_attr_get_raw_value+0xbc/0x100 [hid_sensor_hub] Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17HID: hid-sensor-hub: Processing for duplicate physical idsSrinivas Pandruvada1-86/+102
In HID sensor hub, HID physical ids are used to represent different sensors. For example physical id of 0x73 in usage page = 0x20, represents an accelerometer. The HID sensor hub driver uses this physical ids to create platform devices using MFD. There is 1:1 correspondence between an phy id and a client driver. But in some cases these physical ids are reused. There is a phy id 0xe1, which specifies a custom sensor, which can exist multiple times to represent various custom sensors. In this case there can be multiple instances of client MFD drivers, processing specific custom sensor. In this case when client driver looks for report id or a field index, it should still get the report id specific to its own type. This is also true for reports, they should be directed towards correct instance. This change introduce a way to parse and tie physical devices to their correct instance. Summary of changes: - To get physical ids, use collections. If a collection of type=physical exist then use usage id as in the name of platform device name - As part of the platform data, we assign a hdsev instance, which has start and end of collection indexes. Using these indexes attributes can be tied to correct MFD client instances - When a report is received, call callback with correct hsdev instance. In this way using its private data stored as part of its registry, it can distinguish different sensors even when they have same physical and logical ids. This patch is co-authored with Archana Patni <archna.patni@intel.com>. Reported-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17HID: hid-sensor-hub: Add selector apiSrinivas Pandruvada1-0/+22
In some report descriptors, they leave holes in the selectors. In this case if we use hardcoded selector values, this will result in invalid values. For example, if there is selectors defined for Power State from OFF to D0 to D3. We can't use indexes of these states if some states are not implemented or not present in the report decriptors. In this case, we need to get the indexes from report descriptors. One API is added to get the index of a selector. This API will search for usage id in the field usage list and return the index. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17HID: hid-sensor-hub: quirk for STM Sensor hubArchana Patni1-0/+3
Added STM sensor hub vendor id in HID_SENSOR_HUB_ENUM_QUIRK to fix report descriptors. These devices uses old FW which uses logical 0 as minimum. In these, HID reports are not using proper collection classes. So we need to fix report descriptors,for such devices. This will not have any impact, if the FW uses logical 1 as minimum. We look for usage id for "power and report state", and modify logical minimum value to 1. This is a follow-up patch to commit id 875e36f8. Signed-off-by: Archana Patni <archana.patni@linux.intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-16HID: hid-sensor-hub: Fix buggy report descriptorsSrinivas Pandruvada1-0/+45
This addresses regression caused by commit id "751d17e23a9f7" iio: hid-sensors: Fix power and report state. This commit removed a quirk, to change the enumeration base to 1 from 0 based on an CONFIG paramter. There was objection to add more changes under this quirk, instead suggested to add an HID quirk. But there is no easy way to add HID qurik as the reports are not properly using collection class. The solution was to use logical minimum, which is a correct way. There were changes done in firmware to address this. Unfortunately some devices, still use old FW and can't be upgraded to newer version on Linux devices as there is no FW upgrade tool available for Linux devices. So we need to fix report descriptors, for such devices. This will not have any impact, if the FW uses logical 1 as minimum. In this patch we look for usage id for "power and report state", and modify logical minimum value to 1. Background on enum: In the original HID sensor hub firmwares all Named array enums were to 0-based. But the most recent hub implemented as 1-based, because of the implementation by one of the major OS vendor. Using logical minimum for the field as the base of enum. So we add logical minimum to the selector values before setting those fields. Some sensor hub FWs already changed logical minimum from 0 to 1 to reflect this and hope every other vendor will follow. There is no easy way to add a common HID quirk for NAry elements, even if the standard specifies these field as NAry, the collection used to describe selectors is still just "logical". Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-13Merge branch 'for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - Genius Gx Imperator Keyboard regression fix (missing break in case), by Ben Hutchings - duplicate sysfs entry error fix for hid-sensor-hub driver, by Srinivas Pandruvada * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hid-sensor-hub: fix duplicate sysfs entry error HID: kye: Fix missing break in kye_report_fixup()
2013-12-09HID: hid-sensor-hub: fix duplicate sysfs entry errorSrinivas Pandruvada1-0/+2
Fix kernel warning and failure to register sensor hub devices with MFD. Now many devices has in-built sensor hubs. So by default this HID hub, is properly parsed and register individual sensors as platform device using MFD framework. But if a second sensor hub is attached via USB, which has same sensors, it will result in kernel warning and failure to register MFD cell as the platform device sysfs file name will be same as created by in-built sensor hubs. This patch sets MFD cell id to PLATFORM_DEVID_AUTO. In this way there will never be duplicate sysfs file names. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-02HID: hid-sensor-hub: Add logical min and maxSrinivas Pandruvada1-12/+8
Exporting logical minimum and maximum of HID fields as part of the hid sensor attribute info. This can be used for range checking and to calculate enumeration base for NAry fields of HID sensor hub. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 17:37:19 +0000