summaryrefslogtreecommitdiffstats
path: root/drivers/hid/hid-lg.h
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-18HID: hid-lg4ff: Introduce a module parameter to disable automatic switch of ↵Michal Malý1-12/+0
compatibility mode Introduce a module parameter to disable automatic switch of Logitech gaming wheels from compatibility to native mode. This only applies to multimode wheels. Signed-off-by: Michal Malý <madcatxster@devoid-pointer.net> Tested-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-09-25HID: hid-lg4ff: Adjust X axis input value accordingly to selected range.Michal Malý1-0/+4
Range limiting command for the Driving Force Pro wheel is only a FF_SPRING effect so that the wheel creates resistance when the user tries to turn it past the limit. It is however possible to overpower the FFB motors quite easily which leads to the X axis value exceeding the expected limit. This confuses games which dynamically adjust calibration using the highest/lowest min and max values reported by the wheel. Joydev device driver also doesn't take in account any changes in an axis range after the joystick device is created. This patch recalculates received ABS_X axis value so it is always in <0; 16383> range where 0 is the left limit and 16383 the right limit. Logitech driver for Windows does the same thing. As for any concerns about possible loss of precision, I compared a large set of raw/adjusted values generated by "mult_frac" to values returned by the Windows driver and I got a 100% match. Other Logitech wheels will probably need a similar fix, but I currently lack the information needed to write one. Signed-off-by: Michal Malý <madcatxster@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-03HID: lg4ff: Remove sysfs iface before deallocating memoryMichal Malý1-2/+0
This patch fixes a possible race condition caused by the sysfs interface being removed after the memory used by the interface was already kfree'd. Signed-off-by: Michal Malý <madcatsxter@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-03HID: hid-lg: Allow for custom device-specific properties to be stored in ↵Michal Malý1-0/+7
priv drvdata This patch adds support for custom device-specific properties which can now be stored as private driver data and read/saved using hid_get/set_drvdata(). Signed-off-by: Michal Malý <madcatxster@gmail.com> Tested-by: simon@mungewell.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-04HID: lg4ff - Fix misleading info in KconfigMichal Malý1-1/+1
The description of lg4ff driver has to be changed to reflect the fact that the driver now handles a lot more Logitech wh the Wii. Entry in Kconfig has been renamed to LOGIWHEELS_FF Signed-off-by: Michal Malý <madcatxster@gmail.com> Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-04HID: lg4ff - Add range setting support and sysfs interfaceMichal Malý1-0/+2
Wheel range of certain Logitech wheels - namely Driving Force GT, Driving Force Pro, G25 and G27 can be adjusted. Minimu is 40 degrees, maximum 900. DFGT, G25 and G27 all use a common command, DFP uses another one. Range can be set from userspace by writing to "/sys/module/hid_logitech/drivers/hid:logitech/<dev>range". The driver use list to store range of each connected wheel; it's not possible to use driver_data in hid_device struct as it's already b hig-lg driver. Signed-off-by: Michal Malý <madcatxster@gmail.com> Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-22HID: Add support for Logitech Speed Force Wireless gaming wheelSimon Wood1-0/+6
The following patch adds support for the Logitech Speed Force Wireless gaming wheel. Originally designed for the WII console. Details on the protocol: http://wiibrew.org/wiki/Logitech_USB_steering_wheel This patch relies on previous patch: "Don't Send Feature Reports on Interrupt Endpoint" Logitech as produce a very similar wheel for the PS2/PS3, it is expected that this patch could also support the PS2/PS3 wheel if the USB ID's are added and (if required) the HID descriptor is modified. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-02Merge branch 'master' into upstreamJiri Kosina1-2/+0
Conflicts: drivers/hid/hid-ids.h
2010-01-13HID: add driver for the Logitech Flight System G940Gary Stein1-0/+6
Implements a new USB-HID for Force Feedback based on the normal Logitech Force Feedback code and FF-Memless. Currently only supports the FF_CONSTANT effect although the joystick appears to support additional non-standard ones. Signed-off-by: Gary Stein <LordCnidarian@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-12drop explicit include of autoconf.hSam Ravnborg1-2/+0
kbuild.h forces include of autoconf.h on the commandline using -include - so we do not need to include the file explicit. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2008-10-14HID: move logitech FF processingJiri Slaby1-0/+18
Merge the logitech force feedback processing directly into logitech driver from the usbhid core. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>