summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2019-09-13drm/amd/display: Subsample mode suboptimal for YCbCr4:2:2Krunoslav Kovac2-1/+6
[Why&How] Driver defaults to 1-tap subsample mode for 4:2:2. DCE11.2 added 3-tap. The policy is: DCE8-DCE11 - change to 2-tap, it's better than 1-tap. DCE11.2+ - use 3-tap Note that 4:2:0 was added in DCE11.2 and already uses 3-tap always. Note 2 is that DCE not covered on Linux, only DCN+ Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: refine i2c over auxLewis Huang2-27/+63
[Why] When user mode use i2c over aux through ADL or DDI, the function dal_ddc_service_query_ddc_data will be called. There are two issues. 1. When read/write length > 16byte, current always return false because the DEFAULT_AUX_MAX_DATA_SIZE != length. 2. When usermode only need to read data through i2c, driver will write mot = true at the same address and cause i2c sink confused. Therefore the following read command will get garbage. [How] 1. Add function dal_dcc_submit_aux_command to handle length > 16 byte. 2. Check read size and write size when query ddc data. Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: Fix DML testsIlya Bakoulin1-1/+0
[Why] DML diags tests are failing because the struct contents get clobbered by a memcpy. [How] Remove the memcpy call. Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdkfd: Fix a building error when KFD_SUPPORT_IOMMU_V2 is turned offYong Zhao1-2/+4
The issue was accidentally introduced recently. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: move the call of ras recovery_init and bad page reserve to ↵Tao Zhou4-18/+43
proper place ras recovery_init should be called after ttm init, bad page reserve should be put in front of gpu reset since i2c may be unstable during gpu reset. add cleanup for recovery_init and recovery_fini v2: add more comment and print. remove cancel_work_sync in recovery_init. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: save umc error recordsTao Zhou3-17/+64
save umc error records to ras bad page array v2: add bad pages before gpu reset v3: add NULL check for adev->umc.funcs Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: Hook EEPROM table to RASTao Zhou1-28/+81
support eeprom records load and save for ras, move EEPROM records storing to bad page reserving v2: remove redundant check for con->eh_data Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: change ras bps type to eeprom table record structureTao Zhou2-27/+43
change bps type from retired page to eeprom table record, prepare for saving umc error records to eeprom Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/madgpu: Fix EEPROM Checksum calculation.Andrey Grodzovsky1-2/+2
Fix typo which messed up the calculation. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: Remove clock gating restore.Andrey Grodzovsky1-1/+9
Restoring clock gating break SMU opeartion afterwards, avoid this until this further invistigated with SMU. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: Add smu lock around in pp_smu_i2c_bus_accessAndrey Grodzovsky1-1/+6
Protect from concurrent SMU accesses. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: Add stereo mux and dig programming calls for dcn21Roman Li2-5/+36
[Why] The earlier patch "Hook up calls to do stereo mux and dig programming..." doesn't include update for dcn21. [How] Align dcn21 gpio settings with updated stereo control interface. Signed-off-by: Roman Li <Roman.Li@amd.com> Acked-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdkfd: Query kfd device info by CHIP id instead of pci device idYong Zhao4-151/+35
This optimizes out the pci device id usage in KFD and makes the code more maintainable. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: Disable page faults while reading user wptrsFelix Kuehling1-0/+8
These wptrs must be pinned and GPU accessible when this is called from hqd_load functions. So they should never fault. This resolves a circular lock dependency issue involving four locks including the DQM lock and mmap_sem. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oak Zeng <Oak.Zeng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: disable stutter mode for renoirAaron Liu1-0/+2
With stutter mode enabled, NMI prints frequently. Disable stutter for the moment because NMI warning storm, and will enable it back till the issue is addressed Signed-off-by: Aaron Liu <aaron.liu@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: update renoir_ip_offset.hAaron Liu1-1/+1
This patch updates MP1_BASE in renoir_ip_offset.h Signed-off-by: Aaron Liu <aaron.liu@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/powerplay: implement sysfs for getting dpm clockPrike Liang2-0/+95
With the common interface print_clk_levels can get the following dpm clock: -pp_dpm_dcefclk -pp_dpm_fclk -pp_dpm_mclk -pp_dpm_sclk -pp_dpm_socclk Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: clean up load TMR sequenceJohn Clements1-6/+0
Removed redundant goto statement Signed-off-by: John Clements <john.clements@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: enable TA load support in ArcturusJohn Clements1-1/+2
Add support for loading XGMI/RAS FW Signed-off-by: John Clements <john.clements@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: change r type to int in gmc_v9_0_late_initTao Zhou1-1/+1
change r type from bool to int, suitable for both bool and int return value Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/powerplay: replace smu->table_count with SMU_TABLE_COUNT in smu (v2)Kevin Wang8-27/+8
fix bellow patch issue: drm/amd/powerplay: introduce smu table id type to handle the smu table for each asic ---- "This patch introduces new smu table type, it's to handle the different smu table defines for each asic with the same smu ip." before: use smu->table_count to represent the actual table count in smc firmware use actual table count to check smu function parameter about smu table after: use logic table count "SMU_TABLE_COUNT" to check function parameter because table id already mapped in smu driver, and smu function will use logic table id not actual table id to check func parameter. v2: squash in warning fix Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/amdgpu: add sw_fini interface for df_funcsJack Zhang4-0/+17
add sw_fini interface of df_funcs. This interface will remove sysfs file of df_cntr_avail function. The old behavior only create sysfs of df_cntr_avail in sw_init, but never remove it for lack of sw_fini interface. With this,driver will report create sysfs fail when it's loaded for the second time. Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com> Reviewed-by: Jonathan Kim <Jonathan.Kim@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: init UMC & RSMU register base addressHawking Zhang1-0/+2
UMC RAS feature requires access to UMC & RSMU registers Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu/nbio: switch to amdgpu_nbio_ras_late_init helper functionHawking Zhang4-49/+75
amdgpu_nbio_ras_late_init is used to init nbio specfic ras debugfs/sysfs node and nbio specific interrupt handler. It can be shared among nbio generations Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu/mmhub: switch to amdgpu_mmhub_ras_late_init helper functionHawking Zhang4-32/+60
amdgpu_mmhub_ras_late_init is used to init mmhub specfic ras debugfs/sysfs node and mmhub specific interrupt handler. It can be shared among mmhub generations Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu/sdma: switch to amdgpu_sdma_ras_late_init helper functionHawking Zhang3-41/+55
amdgpu_sdma_ras_late_init is used to init sdma specfic ras debugfs/sysfs node and sdma specific interrupt handler. It can be shared among sdma generations Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu/gfx: switch to amdgpu_gfx_ras_late_init helper functionHawking Zhang3-35/+54
amdgpu_gfx_ras_late_init is used to init gfx specfic ras debugfs/sysfs node and gfx specific interrupt handler. It can be shared among gfx generations Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu/gmc: switch to amdgpu_gmc_ras_late_init helper functionHawking Zhang3-34/+53
amdgpu_gmc_ras_late_init is used to init gmc specfic ras debugfs/sysfs node and gmc specific interrupt handler. It can be shared among gmc generations. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: set ip specific ras interface pointer to NULL after free itHawking Zhang5-7/+24
to prevent access to dangling pointers Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13dmr/amdgpu: Add system auto reboot to RAS.Andrey Grodzovsky3-2/+23
In case of RAS error allow user configure auto system reboot through ras_ctrl. This is also part of the temproray work around for the RAS hang problem. v4: Use latest kernel API for disk sync. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: Avoid HW GPU reset for RAS.Andrey Grodzovsky12-42/+155
Problem: Under certain conditions, when some IP bocks take a RAS error, we can get into a situation where a GPU reset is not possible due to issues in RAS in SMU/PSP. Temporary fix until proper solution in PSP/SMU is ready: When uncorrectable error happens the DF will unconditionally broadcast error event packets to all its clients/slave upon receiving fatal error event and freeze all its outbound queues, err_event_athub interrupt will be triggered. In such case and we use this interrupt to issue GPU reset. THe GPU reset code is modified for such case to avoid HW reset, only stops schedulers, deatches all in progress and not yet scheduled job's fences, set error code on them and signals. Also reject any new incoming job submissions from user space. All this is done to notify the applications of the problem. v2: Extract amdgpu_amdkfd_pre/post_reset from amdgpu_device_lock/unlock_adev Move amdgpu_job_stop_all_jobs_on_sched to amdgpu_job.c Remove print param from amdgpu_ras_query_error_count v3: Update based on prevoius bug fixing patch to properly call amdgpu_amdkfd_pre_reset for other XGMI hive memebers. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: Fix bugs in amdgpu_device_gpu_recover in XGMI case.Andrey Grodzovsky1-13/+10
Issue 1: In XGMI case amdgpu_device_lock_adev for other devices in hive was called to late, after access to their repsective schedulers. So relocate the lock to the begining of accessing the other devs. Issue 2: Using amdgpu_device_ip_need_full_reset to switch the device list from all devices in hive to the single 'master' device who owns this reset call is wrong because when stopping schedulers we iterate all the devices in hive but when restarting we will only reactivate the 'master' device. Also, in case amdgpu_device_pre_asic_reset conlcudes that full reset IS needed we then have to stop schedulers for all devices in hive and not only the 'master' but with amdgpu_device_ip_need_full_reset we already missed the opprotunity do to so. So just remove this logic and always stop and start all schedulers for all devices in hive. Also minor cleanup and print fix. v4: Minor coding style fix. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: remove amdgpu_cs_try_evictChristian König2-71/+1
Trying to evict things from the current working set doesn't work that well anymore because of per VM BOs. Rely on reserving VRAM for page tables to avoid contention. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: reserve at least 4MB of VRAM for page tables v2Christian König3-8/+22
This hopefully helps reduce the contention for page tables. v2: adjust maximum reported VRAM size as well Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: use moving fence instead of exclusive for VM updatesChristian König1-1/+1
Make VM updates depend on the moving fence instead of the exclusive one. Makes it less likely to actually have a dependency. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/powerplay: do proper cleanups on hw_finiEvan Quan3-0/+30
These are needed for smu_reset support. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/powerplay: update cached feature enablement status V3Evan Quan2-53/+49
Need to update in cache feature enablement status after pp_feature settings. Another fix for the commit below: drm/amd/powerplay: implment sysfs feature status function in smu V2: update smu_feature_update_enable_state() and relates V3: use bitmap_or and bitmap_andnot Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/powerplay: guard manual mode prerequisite for clock level forceEvan Quan3-8/+21
Force clock level is for dpm manual mode only. Reported-by: Candice Li <candice.li@amd.com> Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: only apply gds clearing workaround when ras is supportedHawking Zhang1-0/+4
gds clearing workaround should only be applied on asics that support gfx ras Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: fix memory leak when ras is not supported on specific ip blockHawking Zhang4-4/+7
free ras_if if ras is not supported Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: check mmhub_funcs pointer before refering to itHawking Zhang1-1/+1
mmhub callback functions are not initialized for all the ASICs Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: Remove unnecessary TLB workaround (v2)Felix Kuehling1-16/+1
This workaround is better handled in user mode in a way that doesn't require allocating extra memory and breaking userptr BOs. The TLB bug is a performance bug, not a functional or security bug. Hence it is safe to remove this kernel part of the workaround to allow a better workaround using only virtual address alignments in user mode. v2: Removed VI_BO_SIZE_ALIGN definition Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: Use optimal mtypes and PTE bits for ArcturusFelix Kuehling2-2/+22
For compute VRAM allocations on Arturus use the new RW mtype for non-coherent local memory, CC mtype for coherent local memory and PTE_SNOOPED bit for invalidating non-dirty cache lines on remote XGMI mappings. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Tested-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: Determing PTE flags separately for each mapping (v3)Felix Kuehling2-17/+24
The same BO can be mapped with different PTE flags by different GPUs. Therefore determine the PTE flags separately for each mapping instead of storing them in the KFD buffer object. Add a helper function to determine the PTE flags to be extended with ASIC and memory-type-specific logic in subsequent commits. v2: Split Arcturus-specific MTYPE changes into separate commit v3: Fix return type of get_pte_flags to uint64_t Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: Support new arcturus mtypeOak Zeng2-0/+4
Arcturus repurposed mtype WC to RW. Modify gmc functions to support the new mtype Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: switch to amdgpu_ras_late_init for nbio v7_4 (v2)Hawking Zhang1-1/+12
call helper function in late init phase to handle ras init for nbio ip block v2: init local var r to 0 in case the function return failure on asics that don't have ras_late_init implementation Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: add ras_late_init callback function for nbio v7_4 (v3)Hawking Zhang2-0/+47
ras_late_init callback function will be used to do common ras init in late init phase. v2: call ras_late_fini to do cleanup when fails to enable interrupt v3: rename sysfs/debugfs node name to pcie_bif_xxx Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: add mmhub ras_late_init callback function (v2)Hawking Zhang3-22/+35
The function will be called in late init phase to do mmhub ras init v2: check ras_late_init function pointer before invoking the function Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: switch to amdgpu_ras_late_init for gmc v9 block (v2)Hawking Zhang1-112/+47
call helper function in late init phase to handle ras init for gmc ip block v2: call ras_late_fini to do clean up when fail to enable interrupt Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amdgpu: switch to amdgpu_ras_late_init for sdma v4 block (v2)Hawking Zhang1-74/+24
call helper function in late init phase to handle ras init for sdma ip block v2: call ras_late_fini to do clean up when fail to enable interrupt Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-20 23:49:01 +0000