summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2015-09-01Merge branch 'for-next' of ↵Linus Torvalds4-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual stuff from trivial tree for 4.3 (kerneldoc updates, printk() fixes, Documentation and MAINTAINERS updates)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits) MAINTAINERS: update my e-mail address mod_devicetable: add space before */ scsi: a100u2w: trivial typo in printk i2c: Fix typo in i2c-bfin-twi.c treewide: fix typos in comment blocks Doc: fix trivial typo in SubmittingPatches proportions: Spelling s/consitent/consistent/ dm: Spelling s/consitent/consistent/ aic7xxx: Fix typo in error message pcmcia: Fix typo in locking documentation scsi/arcmsr: Fix typos in error log drm/nouveau/gr: Fix typo in nv10.c [SCSI] Fix printk typos in drivers/scsi staging: comedi: Grammar s/Enable support a/Enable support for a/ Btrfs: Spelling s/consitent/consistent/ README: GTK+ is a acronym ASoC: omap: Fix typo in config option description mm: tlb.c: Fix error message ntfs: super.c: Fix error log fix typo in Documentation/SubmittingPatches ...
2015-08-31Merge tag 'clk-for-linus-4.3' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Michael Turquette: "The clk framework changes for 4.3 are mostly updates to existing drivers and the addition of new clock drivers. Stephen Boyd has also done a lot of subsystem-wide driver clean-ups (thanks!). There are also fixes to the framework core and changes to better split clock provider drivers from clock consumer drivers" * tag 'clk-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits) clk: s5pv210: add missing call to samsung_clk_of_add_provider() clk: pistachio: correct critical clock list clk: pistachio: Fix PLL rate calculation in integer mode clk: pistachio: Fix override of clk-pll settings from boot loader clk: pistachio: Fix 32bit integer overflows clk: tegra: Fix some static checker problems clk: qcom: Fix MSM8916 prng clock enable bit clk: Add missing header for 'bool' definition to clk-conf.h drivers/clk: appropriate __init annotation for const data clk: rockchip: register pll mux before pll itself clk: add bindings for the Ux500 clocks clk/ARM: move Ux500 PRCC bases to the device tree clk: remove duplicated code with __clk_set_parent_after clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw) clk: Constify clk_hw argument to provider APIs clk: Hi6220: add stub clock driver dt-bindings: clk: Hi6220: Document stub clock driver dt-bindings: arm: Hi6220: add doc for SRAM controller clk: atlas7: fix pll missed divide NR in fraction mode clk: atlas7: fix bit field and its root clk for coresight_tpiu ...
2015-08-24drm/msm/dsi: Convert to clk_hw based provider APIsStephen Boyd1-2/+2
We're removing struct clk from the clk provider API, so switch this code to using the clk_hw based provider APIs. Cc: Wentao Xu <wentaox@codeaurora.org> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-21drm/radeon: fix hotplug race at startupDave Airlie1-0/+5
We apparantly get a hotplug irq before we've initialised modesetting, [drm] Loading R100 Microcode BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<c125f56f>] __mutex_lock_slowpath+0x23/0x91 *pde = 00000000 Oops: 0002 [#1] Modules linked in: radeon(+) drm_kms_helper ttm drm i2c_algo_bit backlight pcspkr psmouse evdev sr_mod input_leds led_class cdrom sg parport_pc parport floppy intel_agp intel_gtt lpc_ich acpi_cpufreq processor button mfd_core agpgart uhci_hcd ehci_hcd rng_core snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm usbcore usb_common i2c_i801 i2c_core snd_timer snd soundcore thermal_sys CPU: 0 PID: 15 Comm: kworker/0:1 Not tainted 4.2.0-rc7-00015-gbf67402 #111 Hardware name: MicroLink /D850MV , BIOS MV85010A.86A.0067.P24.0304081124 04/08/2003 Workqueue: events radeon_hotplug_work_func [radeon] task: f6ca5900 ti: f6d3e000 task.ti: f6d3e000 EIP: 0060:[<c125f56f>] EFLAGS: 00010282 CPU: 0 EIP is at __mutex_lock_slowpath+0x23/0x91 EAX: 00000000 EBX: f5e900fc ECX: 00000000 EDX: fffffffe ESI: f6ca5900 EDI: f5e90100 EBP: f5e90000 ESP: f6d3ff0c DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 CR0: 8005003b CR2: 00000000 CR3: 36f61000 CR4: 000006d0 Stack: f5e90100 00000000 c103c4c1 f6d2a5a0 f5e900fc f6df394c c125f162 f8b0faca f6d2a5a0 c138ca00 f6df394c f7395600 c1034741 00d40000 00000000 f6d2a5a0 c138ca00 f6d2a5b8 c138ca10 c1034b58 00000001 f6d40000 f6ca5900 f6d0c940 Call Trace: [<c103c4c1>] ? dequeue_task_fair+0xa4/0xb7 [<c125f162>] ? mutex_lock+0x9/0xa [<f8b0faca>] ? radeon_hotplug_work_func+0x17/0x57 [radeon] [<c1034741>] ? process_one_work+0xfc/0x194 [<c1034b58>] ? worker_thread+0x18d/0x218 [<c10349cb>] ? rescuer_thread+0x1d5/0x1d5 [<c103742a>] ? kthread+0x7b/0x80 [<c12601c0>] ? ret_from_kernel_thread+0x20/0x30 [<c10373af>] ? init_completion+0x18/0x18 Code: 42 08 e8 8e a6 dd ff c3 57 56 53 83 ec 0c 8b 35 48 f7 37 c1 8b 10 4a 74 1a 89 c3 8d 78 04 8b 40 08 89 63 Reported-and-Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-08-21Merge tag 'drm-intel-fixes-2015-08-20' of ↵Dave Airlie3-36/+28
git://anongit.freedesktop.org/drm-intel into drm-fixes Revert of a VBT parsing commit that should've been queued for drm-next, not v4.2. The revert unbreaks Braswell among other things. Also on Braswell removal of DP HBR2/TP3 and intermediate eDP frequency support. The code was optimistically added based on incorrect documentation; the platform does not support them. These are cc: stable. Finally a gpu state fix from Chris, also cc: stable. * tag 'drm-intel-fixes-2015-08-20' of git://anongit.freedesktop.org/drm-intel: drm/i915: Avoid TP3 on CHV drm/i915: remove HBR2 from chv supported list Revert "drm/i915: Add eDP intermediate frequencies for CHV" Revert "drm/i915: Allow parsing of variable size child device entries from VBT" drm/i915: Flag the execlists context object as dirty after every use
2015-08-19drm/i915: Avoid TP3 on CHVThulasimani,Sivakumar1-8/+22
This patch removes TP3 support on CHV since there is no support for HBR2 on this platform. v2: rename the function to indicate it checks source rates (Jani) v3: update comment to indicate TP3 dependency on HBR2 supported hardware (Jani) Cc: stable@vger.kernel.org # v4.1+ Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> [Jani: fixed a couple of checkpatch warnings.] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-19drm/i915: remove HBR2 from chv supported listThulasimani,Sivakumar1-3/+4
This patch removes 5.4Gbps from supported link rate for CHV since it is not supported in it. v2: change the ordering for better readability (Ville) Cc: stable@vger.kernel.org # v4.1+ Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-19Revert "drm/i915: Add eDP intermediate frequencies for CHV"Thulasimani,Sivakumar1-6/+0
This reverts commit fe51bfb95c996733150c44d21e1c9f4b6322a326. Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Thu Mar 12 17:10:38 2015 +0200 CHV does not support intermediate frequencies so reverting the patch that added it in the first place Cc: stable@vger.kernel.org # v4.1+ Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-19Revert "drm/i915: Allow parsing of variable size child device entries from VBT"Jani Nikula1-23/+4
This reverts commit 047fe6e6db9161e69271f56daaafdaf2add023b1 Author: David Weinehall <david.weinehall@linux.intel.com> Date: Tue Aug 4 16:55:52 2015 +0300 drm/i915: Allow parsing of variable size child device entries from VBT That commit is not valid for v4.2, however it will be valid for v4.3. It was simply queued too early. The referenced regressing commit is just fine until the size of struct common_child_dev_config changes, and that won't happen until v4.3. Indeed, the expected size checks here rely on the increased size of the struct, breaking new platforms. Fixes: 047fe6e6db91 ("drm/i915: Allow parsing of variable size child device entries from VBT") Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-18drm/atmel-hlcdc: Compile suspend/resume for PM_SLEEP onlyThierry Reding1-1/+1
If PM is enabled but PM_SLEEP is disabled, the suspend/resume functions are still unused and produce a compiler warning. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: <stable@vger.kernel.org> # 4.1+
2015-08-17drm/i915: Flag the execlists context object as dirty after every useChris Wilson1-0/+2
Everytime we use the logical context with execlists it becomes dirty (as the hardware will write the new register values afterwards, as well as the GPU state that will be used). We need to then flag the context as dirty everytime since after a swap-out/swap-in cycle the dirty flag will be cleared, and a further swap-out cycle will then loose the most recent GPU state. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-15Merge tag 'topic/drm-fixes-2015-08-14' of ↵Dave Airlie1-6/+13
git://anongit.freedesktop.org/drm-intel into drm-next single MST fixes from Maarten. * tag 'topic/drm-fixes-2015-08-14' of git://anongit.freedesktop.org/drm-intel: drm/dp/mst: Remove port after removing connector.
2015-08-15Merge tag 'drm-intel-fixes-2015-08-14' of ↵Dave Airlie2-81/+23
git://anongit.freedesktop.org/drm-intel into drm-next three display fixes for Intel. * tag 'drm-intel-fixes-2015-08-14' of git://anongit.freedesktop.org/drm-intel: drm/i915: Commit planes on each crtc separately. drm/i915: calculate primary visibility changes instead of calling from set_config drm/i915: Only dither on 6bpc panels
2015-08-14Revert "drm/nouveau/fifo/gk104: kick channels when deactivating them"Alexandre Courbot1-21/+8
This reverts commit 1addc1264852 This commit seems to cause crashes in gk104_fifo_intr_runlist() by returning 0xbad0da00 when register 0x2a00 is read. Since this commit was intended for GM20B which is not completely supported yet, let's revert it for the time being. Reported-by: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Tested-by: Afzal Mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-08-14drm/vmwgfx: Fix execbuf locking issuesThomas Hellstrom1-2/+2
This addresses two issues that cause problems with viewperf maya-03 in situation with memory pressure. The first issue causes attempts to unreserve buffers if batched reservation fails due to, for example, a signal pending. While previously the ttm_eu api was resistant against this type of error, it is no longer and the lockdep code will complain about attempting to unreserve buffers that are not reserved. The issue is resolved by avoid calling ttm_eu_backoff_reservation in the buffer reserve error path. The second issue is that the binding_mutex may be held when user-space fence objects are created and hence during memory reclaims. This may cause recursive attempts to grab the binding mutex. The issue is resolved by not holding the binding mutex across fence creation and submission. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Cc: <stable@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-08-14Merge branch 'exynos-drm-fixes' of ↵Dave Airlie4-13/+22
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes This pull request fixes memory leak and some issues related to mixer and gscaler driver issues. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos/fimc: fix runtime pm support drm/exynos/mixer: always update INT_EN cache drm/exynos/mixer: correct vsync configuration sequence drm/exynos/mixer: fix interrupt clearing drm/exynos/hdmi: fix edid memory leak drm/exynos: gsc: fix wrong bitwise operation for swap detection
2015-08-13drm/i915: Commit planes on each crtc separately.Maarten Lankhorst2-42/+14
This patch is based on the upstream commit 5ac1c4bcf073ad and amended for v4.2 to make sure it works as intended. Repeated calls to begin_crtc_commit can cause warnings like this: [ 169.127746] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:616 [ 169.127835] in_atomic(): 0, irqs_disabled(): 1, pid: 1947, name: kms_flip [ 169.127840] 3 locks held by kms_flip/1947: [ 169.127843] #0: (&dev->mode_config.mutex){+.+.+.}, at: [<ffffffff814774bc>] __drm_modeset_lock_all+0x9c/0x130 [ 169.127860] #1: (crtc_ww_class_acquire){+.+.+.}, at: [<ffffffff814774cd>] __drm_modeset_lock_all+0xad/0x130 [ 169.127870] #2: (crtc_ww_class_mutex){+.+.+.}, at: [<ffffffff81477178>] drm_modeset_lock+0x38/0x110 [ 169.127879] irq event stamp: 665690 [ 169.127882] hardirqs last enabled at (665689): [<ffffffff817ffdb5>] _raw_spin_unlock_irqrestore+0x55/0x70 [ 169.127889] hardirqs last disabled at (665690): [<ffffffffc0197a23>] intel_pipe_update_start+0x113/0x5c0 [i915] [ 169.127936] softirqs last enabled at (665470): [<ffffffff8108a766>] __do_softirq+0x236/0x650 [ 169.127942] softirqs last disabled at (665465): [<ffffffff8108ae75>] irq_exit+0xc5/0xd0 [ 169.127951] CPU: 1 PID: 1947 Comm: kms_flip Not tainted 4.1.0-rc4-patser+ #4039 [ 169.127954] Hardware name: LENOVO 2349AV8/2349AV8, BIOS G1ETA5WW (2.65 ) 04/15/2014 [ 169.127957] ffff8800c49036f0 ffff8800cde5fa28 ffffffff817f6907 0000000080000001 [ 169.127964] 0000000000000000 ffff8800cde5fa58 ffffffff810aebed 0000000000000046 [ 169.127970] ffffffff81c5d518 0000000000000268 0000000000000000 ffff8800cde5fa88 [ 169.127981] Call Trace: [ 169.127992] [<ffffffff817f6907>] dump_stack+0x4f/0x7b [ 169.128001] [<ffffffff810aebed>] ___might_sleep+0x16d/0x270 [ 169.128008] [<ffffffff810aed38>] __might_sleep+0x48/0x90 [ 169.128017] [<ffffffff817fc359>] mutex_lock_nested+0x29/0x410 [ 169.128073] [<ffffffffc01635f0>] ? vgpu_write64+0x220/0x220 [i915] [ 169.128138] [<ffffffffc017fddf>] ? ironlake_update_primary_plane+0x2ff/0x410 [i915] [ 169.128198] [<ffffffffc0190e75>] intel_frontbuffer_flush+0x25/0x70 [i915] [ 169.128253] [<ffffffffc01831ac>] intel_finish_crtc_commit+0x4c/0x180 [i915] [ 169.128279] [<ffffffffc00784ac>] drm_atomic_helper_commit_planes+0x12c/0x240 [drm_kms_helper] [ 169.128338] [<ffffffffc0184264>] __intel_set_mode+0x684/0x830 [i915] [ 169.128378] [<ffffffffc018a84a>] intel_crtc_set_config+0x49a/0x620 [i915] [ 169.128385] [<ffffffff817fdd39>] ? mutex_unlock+0x9/0x10 [ 169.128391] [<ffffffff81467b69>] drm_mode_set_config_internal+0x69/0x120 [ 169.128398] [<ffffffff8119b547>] ? might_fault+0x57/0xb0 [ 169.128403] [<ffffffff8146bf93>] drm_mode_setcrtc+0x253/0x620 [ 169.128409] [<ffffffff8145c600>] drm_ioctl+0x1a0/0x6a0 [ 169.128415] [<ffffffff810b3b41>] ? get_parent_ip+0x11/0x50 [ 169.128424] [<ffffffff811e9ab8>] do_vfs_ioctl+0x2f8/0x530 [ 169.128429] [<ffffffff810d0fcd>] ? trace_hardirqs_on+0xd/0x10 [ 169.128435] [<ffffffff812e7676>] ? selinux_file_ioctl+0x56/0x100 [ 169.128439] [<ffffffff811e9d71>] SyS_ioctl+0x81/0xa0 [ 169.128445] [<ffffffff81800697>] system_call_fastpath+0x12/0x6f Solve it by using the newly introduced drm_atomic_helper_commit_planes_on_crtc. The problem here was that the drm_atomic_helper_commit_planes() helper we were using was basically designed to do begin_crtc_commit(crtc #1) begin_crtc_commit(crtc #2) ... commit all planes finish_crtc_commit(crtc #1) finish_crtc_commit(crtc #2) The problem here is that since our hardware relies on vblank evasion, our CRTC 'begin' function waits until we're out of the danger zone in which register writes might wind up straddling the vblank, then disables interrupts; our 'finish' function re-enables interrupts after the registers have been written. The expectation is that the operations between 'begin' and 'end' must be performed without sleeping (since interrupts are disabled) and should happen as quickly as possible. By clumping all of the 'begin' calls together, we introducing a couple problems: * Subsequent 'begin' invocations might sleep (which is illegal) * The first 'begin' ensured that we were far enough from the vblank that we could write our registers safely and ensure they all fell within the same frame. Adding extra delay waiting for subsequent CRTC's wasn't accounted for and could put us back into the 'danger zone' for CRTC #1. This commit solves the problem by using a new helper that allows an order of operations like: for each crtc { begin_crtc_commit(crtc) // sleep (maybe), then disable interrupts commit planes for this specific CRTC end_crtc_commit(crtc) // reenable interrupts } so that sleeps will only be performed while interrupts are enabled and we can be sure that registers for a CRTC will be written immediately once we know we're in the safe zone. The crtc->config->base.crtc update may seem unrelated, but the helper will use it to obtain the crtc for the state. Without the update it will dereference NULL and crash. Changes since v1: - Use Matt Roper's commit message. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=90398 Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-13drm/i915: calculate primary visibility changes instead of calling from ↵Maarten Lankhorst1-39/+7
set_config This should be much cleaner, with the same effects. (cherry picked for v4.2 from commit fb9d6cf8c29bfcb0b3c602f7ded87f128d730382) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=90398 Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-13drm/i915: Only dither on 6bpc panelsDaniel Vetter1-1/+3
In commit d328c9d78d64ca11e744fe227096990430a88477 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Apr 10 16:22:37 2015 +0200 drm/i915: Select starting pipe bpp irrespective or the primary plane we started to select the pipe bpp from sink capabilities and not from the primary framebuffer - that one might change (and we don't want to incur a modeset) and sprites might contain higher bpp content too. We also selected dithering on a 8 bpc screen displaying a 24bpp rgb primary, because pipe_bpp is 24 for such a typical 8 bpc sink, but since the commit mentioned above, base_bpp is always the absolute maximum supported by the hardware, e.g., 36 bpp on my Ironlake chip. Iow. the only way to not get dithering would have been to connect a deep color 12 bpc display, so pipe_bpp == 36 == base_bpp. Hence only enable dithering on 6bpc screens where we difinitely and always want it. Cc: Mario Kleiner <mario.kleiner.de@gmail.com> Reported-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-12Revert "drm/amdgpu: Configure doorbell to maximum slots"Alex Deucher1-1/+1
This reverts commit 78ad5cdd21f0d614983fc397338944e797ec70b9. This commit breaks dpm and suspend/resume on CZ.
2015-08-12drm/amdgpu: add context buffer size check for HEVCBoyuan Zhang1-3/+14
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-08-11drm/dp/mst: Remove port after removing connector.Maarten Lankhorst1-6/+13
The port is removed synchronously, but the connector delayed. This causes a use after free which can cause a kernel BUG with slug_debug=FPZU. This is fixed by freeing the port after the connector. This fixes a regression introduced with 6b8eeca65b18ae77e175cc2b6571731f0ee413bf "drm/dp/mst: close deadlock in connector destruction." Cc: stable@vger.kernel.org Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-11drm/exynos/fimc: fix runtime pm supportMarek Szyprowski1-1/+0
Once pm_runtime_set_active() gets called, the kernel assumes that given device has already enabled runtime pm and will call pm_runtime_suspend() without matching pm_runtime_resume(). In case of DRM FIMC IPP driver, this will result in calling clk_disable() without respective call to clk_enable(). This patch removes call to pm_runtime_set_active() to ensure that pm_runtime_suspend/resume calls will match. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-11drm/exynos/mixer: always update INT_EN cacheAndrzej Hajda1-0/+5
INT_EN cache field was updated only by mixer_enable_vblank. The patch adds update also by mixer_disable_vblank function. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-11drm/exynos/mixer: correct vsync configuration sequenceAndrzej Hajda1-2/+5
Specification advises to clear vsync indicator before configuring vsync. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-11drm/exynos/mixer: fix interrupt clearingAndrzej Hajda1-5/+4
The driver used incorrect flags to clear interrupt status. The patch fixes it. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-11drm/exynos/hdmi: fix edid memory leakAndrzej Hajda1-1/+6
edid returned by drm_get_edid should be freed. The patch fixes it. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-11drm/exynos: gsc: fix wrong bitwise operation for swap detectionHyungwon Hwang1-4/+2
The bits for rotation are not used as exclusively. So GSC_IN_ROT_270 can not be used for swap detection. The definition of it is same with GSC_IN_ROT_MASK. It is enough to check GSC_IN_ROT_90 bit is set or not to check whether width / height size swapping is needed. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-08Merge tag 'drm-intel-fixes-2015-08-07' of ↵Linus Torvalds2-5/+24
git://anongit.freedesktop.org/drm-intel Pull drm fixes from Daniel Vetter: "One i915 regression fix and a drm core one since Dave's not around, both introduced in 4.2 so not cc: stable. The fix for the warning Ted reported isn't in here yet since he didn't yet supply a tested-by and I can't repro this one myself (it's in fixup code that needs firmware doing something i915 wouldn't do)" * tag 'drm-intel-fixes-2015-08-07' of git://anongit.freedesktop.org/drm-intel: drm/vblank: Use u32 consistently for vblank counters drm/i915: Allow parsing of variable size child device entries from VBT
2015-08-07treewide: fix typos in comment blocksMasahiro Yamada2-2/+2
Looks like the word "contiguous" is often mistyped. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-08-07drm/vblank: Use u32 consistently for vblank countersDaniel Vetter1-1/+1
In commit 99264a61dfcda41d86d0960cf2d4c0fc2758a773 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Apr 15 19:34:43 2015 +0200 drm/vblank: Fixup and document timestamp update/read barriers I've switched vblank->count from atomic_t to unsigned long and accidentally created an integer comparison bug in drm_vblank_count_and_time since vblanke->count might overflow the u32 local copy and hence the retry loop never succeed. Fix this by consistently using u32. Cc: Michel Dänzer <michel@daenzer.net> Reported-by: Michel Dänzer <michel@daenzer.net> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-08-07drm/nouveau/gr: Fix typo in nv10.cMasanari Iida1-2/+2
This patch fix spelling typo in printk within nv10.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-08-07treewide: Fix typo compatability -> compatibilityLaurent Pinchart1-2/+2
Even though 'compatability' has a dedicated entry in the Wiktionary, it's listed as 'Mispelling of compatibility'. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> for the atomic_helper.c Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-08-07Merge branch 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linuxLinus Torvalds7-24/+50
Pull amdgpu fixes from Alex Deucher: "Just a few amdgpu fixes to make sure we report the proper firmware information and number of render buffers to userspace and a typo in a debugging function" [ Pulling directly from Alex since Dave Airlie is on vacation - Linus ] * 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: set fw_version and feature_version for smu fw loading drm/amdgpu: add feature version for SDMA ucode drm/amdgpu: add feature version for RLC and MEC v2 drm/amdgpu: increment queue when iterating on this variable. drm/amdgpu: fix rb setting for CZ
2015-08-07Merge branch 'drm-tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds1-2/+2
Pull TDA998x i2c driver fixes from Russell King: "This fixes the double-checksumming of the AVI infoframe which was resulting in the checksum always being zero. It went unnoticed as none of my HDMI devices had a problem with this" [ Pulling directly from rmk since Dave Airlie is on vacation - Linus ] * 'drm-tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: drm/i2c: tda998x: fix bad checksum of the HDMI AVI infoframe
2015-08-06drm/i915: Allow parsing of variable size child device entries from VBTDavid Weinehall1-4/+23
VBT version 196 increased the size of common_child_dev_config. The parser code assumed that the size of this structure would not change. The modified code now copies the amount needed based on the VBT version, and emits a debug message if the VBT version is unknown (too new); since the struct config block won't shrink in newer versions it should be harmless to copy the maximum known size in such cases, so that's what we do, but emitting the warning is probably sensible anyway. In the longer run it might make sense to modify the parser code to use a version/feature mapping, rather than hardcoding things like this, but for now the variants are fairly managable. This fixes a regression introduced in commit 90e4f1592bb6e82f6690f0e05a8aadcf04d7bce7 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Mar 25 18:45:58 2015 +0200 drm/i915: Fix the VBT child device parsing for BSW since we're hitting a DRM_ERROR on older platforms with this. v2: Stricter size checks Signed-off-by: David Weinehall <david.weinehall@linux.intel.com> [danvet: Fixup format string.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-05drm/amdgpu: set fw_version and feature_version for smu fw loadingJammy Zhou3-21/+30
The fw_version and feature_verion should be set correctly when the firmwares are loaded by SMU on Tonga/Carrzio/Iceland Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-08-05drm/amdgpu: add feature version for SDMA ucodeJammy Zhou5-1/+5
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-08-05drm/amdgpu: add feature version for RLC and MEC v2Jammy Zhou4-5/+21
Expose feature version to user space for RLC/MEC/MEC2 ucode as well v2: fix coding style Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-08-05drm/amdgpu: increment queue when iterating on this variable.Nicolas Iooss1-1/+1
gfx_v7_0_print_status contains a for loop on variable queue which does not update this variable between each iteration. This is bug is reported by clang while building allmodconfig LLVMLinux on x86_64: drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:5126:19: error: variable 'queue' used in loop condition not modified in loop body [-Werror,-Wloop-analysis] for (queue = 0; queue < 8; i++) { ^~~~~ Fix this by incrementing variable queue instead of i in this loop. Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-08-05drm/amdgpu: fix rb setting for CZAlex Deucher1-4/+1
Always set num_rbs to 2 for CZ. The 1 RB parts are often harvest configs. The will get sorted out in mesa when we program PA_SC_RASTER_CONFIG[_1]. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-08-05drm/i2c: tda998x: fix bad checksum of the HDMI AVI infoframeJean-Francois Moine1-2/+2
The commit 8c7a075da9f7980cc95ffcd7e6621d4a87f20f40 "drm/i2c: tda998x: use drm_hdmi_avi_infoframe_from_display_mode()" also uses hdmi_avi_infoframe_pack() to create the AVI infoframe. This function sets the checksum of the frame and this breaks the second calculation of the checksum done in tda998x_write_if(). Fixes: 8c7a075da9f7980c ("drm/i2c: tda998x: use drm_hdmi_avi_infoframe_from_display_mode()") Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-04drm/atomic-helpers: Make encoder picking more robustDaniel Vetter1-5/+6
We've had a few issues with atomic where subtle bugs in the encoder picking logic lead to accidental self-stealing of the encoder, resulting in a NULL connector_state->crtc in update_connector_routing and subsequent. Linus applied some duct-tape for an mst regression in commit 27667f4744fc5a0f3e50910e78740bac5670d18b Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Wed Jul 29 22:18:16 2015 -0700 i915: temporary fix for DP MST docking station NULL pointer dereference But that was incomplete (the code will still oops when debuggin is enabled) and mangled the state even further. So instead WARN and bail out as the more future-proof option. Cc: Theodore Ts'o <tytso@mit.edu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-08-04drm/dp-mst: Remove debug WARN_ONDaniel Vetter1-1/+0
Apparently been in there since forever and fairly easy to hit when hotplugging really fast. I can do that since my mst hub has a manual button to flick the hpd line for reprobing. The resulting WARNING spam isn't pretty. Cc: Dave Airlie <airlied@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-08-04drm/i915: Fixup dp mst encoder selectionDaniel Vetter1-0/+11
In commit 8c7b5ccb729870e606321b3703e2c2e698c49a95 Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Date: Tue Apr 21 17:13:19 2015 +0300 drm/i915: Use atomic helpers for computing changed flags we've switched over to the atomic version to compute the crtc->encoder->connector routing from the i915 variant. That one relies upon the ->best_encoder callback, but the i915-private version relied upon intel_find_encoder. Which didn't matter except for dp mst, where the encoder depends upon the selected crtc. Fix this functional bug by implemented a correct atomic-state based encoder selector for dp mst. Note that we can't get rid of the legacy best_encoder callback since the fbdev emulation uses that still. That means it's incorrect there still, but that's been the case ever since i915 dp mst support was merged so not a regression. Best to fix that by converting fbdev over to atomic too. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-08-04drm/atomic-helper: Add an atomice best_encoder callbackDaniel Vetter1-1/+6
With legacy helpers all the routing was already set up when calling best_encoder and so could be inspected. But with atomic it's staged, hence we need a new atomic compliant callback for drivers which need to inspect the requested state and can't just decided the best encoder statically. This is needed to fix up i915 dp mst where we need to pick the right encoder depending upon the requested CRTC for the connector. v2: Don't forget to amend the kerneldoc Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Theodore Ts'o <tytso@mit.edu> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-08-02i915: temporary fix for DP MST docking station NULL pointer dereferenceLinus Torvalds1-3/+5
Ted Ts'o reports that his Lenovo T540p ThinkPad crashes at boot if attached to the docking station. This is a regression that he was able to bisect to commit 8c7b5ccb7298: "drm/i915: Use atomic helpers for computing changed flags:" The reason seems to be the new call to drm_atomic_helper_check_modeset() added to intel_modeset_compute_config(), which in turn calls update_connector_routing(), and somehow ends up picking a NULL crtc for the connector state, causing the subsequent drm_crtc_index() to OOPS. Daniel Vetter says that the fundamental issue seems to be confusion in the encoder selection, and this isn't the right fix, but while he chases down the proper fix, this at least avoids the NULL pointer dereference and makes Ted's docking station work again. Reported-bisected-and-tested-by: Theodore Ts'o <tytso@mit.edu> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Mani Nikula <jani.nikula@linux.intel.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-31Merge tag 'drm-intel-fixes-2015-07-31' of ↵Linus Torvalds3-10/+23
git://anongit.freedesktop.org/drm-intel Pull drm intel fixes from Daniel Vetter: "I delayed my -fixes pull a bit hoping that I could include a fix for the dp mst stuff but looks a bit more nasty than that. So just 3 other regression fixes, one 4.2 other two cc: stable" * tag 'drm-intel-fixes-2015-07-31' of git://anongit.freedesktop.org/drm-intel: drm/i915: Declare the swizzling unknown for L-shaped configurations drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgtt drm/i915: Replace WARN inside I915_READ64_2x32 with retry loop
2015-07-30drm/i915: Declare the swizzling unknown for L-shaped configurationsChris Wilson1-1/+4
The old style of memory interleaving swizzled upto the end of the first even bank of memory, and then used the remainder as unswizzled on the unpaired bank - i.e. swizzling is not constant for all memory. This causes problems when we try to migrate memory and so the kernel prevents migration at all when we detect L-shaped inconsistent swizzling. However, this issue also extends to userspace who try to manually detile into memory as the swizzling for an individual page is unknown (it depends on its physical address only known to the kernel), userspace cannot correctly swizzle. Note that this is a new attempt for the previously merged one, reverted in commit d82c0ba6e306f079407f07003e53c262d683397b Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jul 14 12:29:27 2015 +0200 Revert "drm/i915: Declare the swizzling unknown for L-shaped configurations" This is cc: stable since we need it to fix up troubles with wc cpu mmaps that userspace recently started to use widely. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91105 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org [danvet: Add note about previous (failed attempt).] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-30drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgttChris Wilson1-0/+11
If the device does not support the aliasing ppgtt, we must translate user bind requests (PIN_USER) from LOCAL_BIND to a GLOBAL_BIND. However, since this is device specific we cannot do this conveniently in the upper layers and so must manage the vma->bound flags in the backend. Partial revert of commit 75d04a3773ecee617847de963ae4195d6aa74c28 [4.2-rc1] Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Apr 28 17:56:17 2015 +0300 drm/i915/gtt: Allocate va range only if vma is not bound Note this was spotted by Daniel originally, but we dropped the ball in getting the fix in before the bug going wild. Sorry all. Reported-by: Vincent Legoll vincent.legoll@gmail.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91133 References: https://bugs.freedesktop.org/show_bug.cgi?id=90224 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 18:39:16 +0000