summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2020-09-07drm/vc4: hdmi: Store the encoder type in the variant structureMaxime Ripard2-1/+5
The vc4 CRTC will use the encoder type to control its output clock muxing. However, this will be different from HDMI0 to HDMI1, so let's store our type in the variant structure so that we can support multiple controllers later on. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/2736a86b498551ba9dbc5803c5bb910627a2550c.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add a set_timings callbackMaxime Ripard2-32/+44
Similarly to the previous patches, the timings setup in the HDMI controller of the BCM2711 is slightly different, mostly because it supports higher resolutions and thus needed more spaces for the various timings, resulting in the register layout changing. Let's add a callback for that as well. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/0cfcbb379212f90b4abc76c0ccf3b90d1d7c0268.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add a CSC setup callbackMaxime Ripard2-28/+45
Similarly to the previous patches, the CSC setup is slightly different in the BCM2711 than in the previous generations. Let's add a callback for it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/5c19bbf10153cb42ca0fb67e08606c8295c17236.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add PHY RNG enable / disable functionMaxime Ripard3-6/+32
Let's continue the implementation of hooks for the parts that change in the BCM2711 SoC with the PHY RNG setup. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/216155f1c0b83e622ac60a2f7d00eb707de3acba.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add PHY init and disable functionMaxime Ripard4-7/+46
The HDMI PHY in the BCM2711 HDMI controller is significantly more complicated to setup than in the older BCM283x SoCs. Let's add hooks to enable and disable the PHY. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/7216826284dbc60a58bdacd662805d20699e5c80.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add reset callbackMaxime Ripard2-13/+21
The BCM2711 and BCM283x HDMI controllers use a slightly different reset sequence, so let's add a callback to reset the controller. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/a34bcb493da07eae58ed704f65e72ce0748e8952.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Implement a register layout abstractionMaxime Ripard4-308/+464
The HDMI controllers found in the BCM2711 have most of the registers reorganized in multiple registers areas and at different offsets than previously found. The logic however remains pretty much the same, so it doesn't really make sense to create a whole new driver and we should share the code as much as possible. Let's implement some indirection to wrap around a register and depending on the variant will lookup the associated register on that particular variant. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/3070236daff920e7edd11c5a72ac31fd0f6a656b.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Introduce resource init and variantMaxime Ripard2-20/+51
The HDMI controllers found in the BCM2711 has a pretty different clock and registers areas than found in the older BCM283x SoCs. Let's create a variant structure to store the various adjustments we'll need later on, and a function to get the resources needed for one particular version. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/71cfa3ce3d865bbab52a0e5651bc052dc4893f11.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Remove vc4_hdmi_connectorMaxime Ripard2-32/+10
The vc4_hdmi_connector was only used to switch between drm_connector to drm_encoder. However, we can now use vc4_hdmi to do the switch, so that structure is redundant. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/aee5120728db350b19c074de4290eafaf01e6671.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Remove vc4_dev hdmi pointerMaxime Ripard2-8/+0
Now that we don't have any users anymore, we can kill that pointer. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/d7ebf50319bbd902e4b7b7c39ae1612c3b38e6b2.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Retrieve the vc4_hdmi at unbind using our deviceMaxime Ripard2-3/+25
The unbind function needs to retrieve a vc4_hdmi structure pointer through the struct device that we're given since we want to support multiple HDMI controllers. However, our optional ASoC support doesn't make that trivial since it will overwrite the device drvdata if we use it, but obviously won't if we don't use it. Let's make sure the fields are at the proper offset to be able to cast between the snd_soc_card structure and the vc4_hdmi structure transparently so we can support both cases. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/717082cba06b5c06280f26c56c08aee512365ed3.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Pass vc4_hdmi to CEC codeMaxime Ripard1-15/+9
Our CEC code also retrieves the associated vc4_hdmi by setting the vc4_dev pointer as its private data, and then dereferences its vc4_hdmi pointer. In order to eventually get rid of that pointer, we can simply pass the vc4_hdmi pointer directly. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/cb575cb9e13018bce131b8535e5b572dc1027877.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add container_of macros for encoders and connectorsMaxime Ripard2-29/+28
Whenever the code needs to access the vc4_hdmi structure from a DRM connector or encoder, it first accesses the drm_device associated to the connector, then retrieve the drm_dev private data which gives it a pointer to our vc4_dev, and will finally follow the vc4_hdmi pointer in that structure. That will also give us some trouble when having multiple controllers, but now that we have our encoder and connector structures that are part of vc4_hdmi, we can simply call container_of on the DRM connector or encoder and retrieve the vc4_hdmi structure directly. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/536ecce5898ea75839fa3788b876009d69a5ccae.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Use local vc4_hdmi directlyMaxime Ripard1-6/+6
The function vc4_hdmi_connector_detect access its vc4_hdmi struct by dereferencing the pointer in the structure vc4_dev. This will cause some issues when we will have multiple HDMI controllers, so let's just use the local variable for now instead of dereferencing that pointer all the time, and we'll fix the local variable later. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/ef92c5582d3b2894128b2272a8ada7cbc20be3d9.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Move accessors to vc4_hdmiMaxime Ripard2-18/+12
The current driver only supports a single HDMI controller, and part of the issue is that the main vc4_dev structure holds a pointer to its (only) HDMI controller, and the HDMI registers accessors will use it to retrieve the mapped addresses. Let's modify those accessors to use directly the vc4_hdmi structure so that we can eventually get rid of that single global pointer. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/886b955586264ce078d7d35e9b8ef9ae51675c27.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Rename hdmi to vc4_hdmiMaxime Ripard1-141/+142
The driver isn't consistent with the name given to the vc4_hdmi structure pointer in its functions. Make sure to use a consistent name. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/696be840dc427245afe94b43e0b829c728d948a7.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Remove DDC argument to connector_initMaxime Ripard1-4/+3
Now that we are passing the vc4_hdmi structure to the connector init function, we can simply use the pointer in that structure instead of having the pointer as an argument. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/4fe1b45fe45e4ba57d40154da010807d4e5db86c.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: rework connectors and encodersMaxime Ripard2-79/+72
the vc4_hdmi driver has some custom structures to hold the data it needs to associate with the drm_encoder and drm_connector structures. However, it allocates them separately from the vc4_hdmi structure which makes it more complicated than it needs to be. Move those structures to be contained by vc4_hdmi and update the code accordingly. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/93b418d63c876355af2b3d3afebe31a256268623.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Move structure to headerMaxime Ripard2-75/+87
We will need to share the vc4_hdmi and related structures with multiple files, so let's create a header for it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/db3ff2babc914e38e86f794c4e49128697aed887.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Use debugfs private fieldMaxime Ripard1-3/+1
We're calling vc4_debugfs_add_file with our struct vc4_hdmi pointer set in the private field, but we don't use that field and go through the main struct vc4_dev to get it. Let's use the private field directly, that will save us some trouble later on. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/24028dc06c379dbc71f98e027cce2839fdd446ce.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Add BCM2711 pixelvalvesMaxime Ripard2-2/+100
The BCM2711 has 5 pixelvalves, so now that our driver is ready, let's add support for them. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/2553ec9ece0d8a0e5299ff74ed932a38703c5db9.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: drv: Disable the CRTC at boot timeMaxime Ripard3-0/+30
In order to prevent issues during the firmware to KMS transition, we need to make sure the pixelvalve are disabled at boot time so that the DRM state matches the hardware state. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/ad57f1bdeae7a99631713b0fc193c86f223de042.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Move the CRTC disable outMaxime Ripard1-12/+22
We'll need to reuse the part that disables the HVS and PixelValve during boot too, so let's create a separate function. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/5288fb72ed2da643085dce1bc7f6d6f656bf176e.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hvs: Introduce a function to get the assigned FIFOMaxime Ripard2-0/+55
At boot time, if we detect that a pixelvalve has been enabled, we need to be able to retrieve the HVS channel it has been assigned to so that we can disable that channel too. Let's create that function that returns the FIFO or an error from a given output. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/178192d90874559b8386139f2226e773347729fc.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hvs: Make the stop_channel function publicMaxime Ripard2-1/+2
During the transition from the firmware to the KMS driver, we need to pay particular attention to how we deal with the pixelvalves that have already been enabled, otherwise either timeouts or stuck pixels can occur. We'll thus need to call the function to stop an HVS channel at boot. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/a9d5f0891c3bc1deb6b16d56ca6994ed912ec7c7.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Clear the PixelValve FIFO during configurationMaxime Ripard1-1/+1
Even though it's not really clear why we need to flush the PV FIFO during the configuration even though we started by flushing it, experience shows that without it we get a stale pixel stuck in the FIFO between the HVS and the PV. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/ccd6269ba37b2f849ba6e62471c99bd93a4548a0.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Clear the PixelValve FIFO on disableMaxime Ripard1-2/+1
In order to avoid a stale pixel getting stuck on mode change or a disable / enable cycle, we need to make sure to flush the PV FIFO on disable. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/26fe48b09d77088679ed0c8cb8cf0db2f108195e.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Add a delay after disabling the PixelValve outputMaxime Ripard1-0/+18
In order to avoid pixels getting stuck in the (unflushable) FIFO between the HVS and the PV, we need to add some delay after disabling the PV output and before disabling the HDMI controller. 20ms seems to be good enough so let's use that. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/15cf215bd2ceebd203c4010c09c21a4019c650ed.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: encoder: Add finer-grained encoder callbacksMaxime Ripard2-0/+26
In the BCM2711, the setup of the HVS, pixelvalve and HDMI controller requires very precise ordering and timing that the regular atomic callbacks don't provide. Let's add new callbacks on top of the regular ones to be able to split the configuration as needed. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/1dd78efe8f29add73c97d0148cfd4ec8e34aaf22.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Move HVS channel init before the PV initialisationMaxime Ripard1-4/+4
In order to avoid stale pixels getting stuck in an intermediate FIFO between the HVS and the pixelvalve on BCM2711, we need to configure the HVS channel before the pixelvalve is reset and configured. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/9d7c5a03bc1a1e6d50f7b617cc2d8a46a4bbb7bc.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Remove redundant pixelvalve resetMaxime Ripard1-1/+0
Since we moved the pixelvalve configuration to atomic_enable, we're now first calling the function that resets the pixelvalve and then the one that configures it. However, the first thing the latter is doing is calling the reset function, meaning that we reset twice our pixelvalve. Let's remove the first call. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/a0a31af0d4a7a070de979f0e5b618d9e2c730e7f.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Remove mode_set_nofbMaxime Ripard1-6/+1
On BCM2711 to avoid stale pixels getting stuck in intermediate FIFOs, the pixelvalve needs to be setup each time there's a mode change or enable / disable sequence. Therefore, we can't really use mode_set_nofb anymore to configure it, but we need to move it to atomic_enable. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/f86c7a6946f98262f1cf59a461596a796d4bcc5f.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hvs: Make sure our channel is resetMaxime Ripard1-0/+4
In order to clear our intermediate FIFOs that might end up with a stale pixel, let's make sure our FIFO channel is reset every time our channel is setup. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/b34c562b36177c758dd2e9d84bceb07689bfbe05.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Move the HVS gamma LUT setup to our init functionMaxime Ripard4-47/+16
Since most of the HVS channel is setup in the init function, let's move the gamma setup there too. As this makes the HVS mode_set function empty, let's remove it in the process. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/d439da8f1592a450a6ad35ab1f9e77def17c7965.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Move HVS init and close to a functionMaxime Ripard1-46/+58
In order to make further refactoring easier, let's move the HVS channel setup / teardown to their own function. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/fb1b5299d1636ddce8340b51a80d51641839f83b.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Move PV dump to config_pvMaxime Ripard1-14/+12
Now that we only configure the PixelValve in vc4_crtc_config_pv, it doesn't really make much sense to dump its register content in its caller. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/c195af7d9e140a2a6db32992ee7e54071c6f94ba.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Turn pixelvalve reset into a functionMaxime Ripard1-7/+13
The driver resets the pixelvalve FIFO in a number of occurences without always using the same sequence. Since this will be critical for BCM2711, let's move that sequence to a function so that we are consistent. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/fb31003a9eee02c4b949556299ff41f0a113499a.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Disable color management for HVS5Maxime Ripard2-7/+12
The HVS5 uses different color matrices. Disable color management support for now. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/e528e2edf0a1be3930196d437e548114dd9fcf59.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Add HDMI1 encoder typeMaxime Ripard1-0/+1
The BCM2711 sports a second HDMI controller, so let's add that second HDMI encoder type. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/6ba56d2421a4ad59ce72178e8f37eacfbd72cb33.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Rename HDMI encoder type to HDMI0Maxime Ripard3-3/+3
The previous generations were only supporting a single HDMI controller, but that's about to change, so put an index as well to differentiate between the two controllers. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/84e11e4793aaa30d6e5c56e305d22404ac5a932d.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Add function to compute FIFO level bitsMaxime Ripard1-2/+10
The longer FIFOs in vc5 pixelvalves means that the FIFO full level doesn't fit in the original register field and that we also have a secondary field. In order to prepare for this, let's move the registers fill part to a helper function. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/e46a3823128af50c1c833de8fa9b95e9b86c2f66.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Add FIFO depth to vc4_crtc_dataMaxime Ripard2-3/+20
Not all pixelvalve FIFOs in vc5 have the same depth, so we need to add that to our vc4_crtc_data structure to be able to compute the fill level properly later on. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/7df3549c1bea9b0a27c784dc416bb9a831e4e18f.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Assign output to channel automaticallyMaxime Ripard6-26/+200
The HVS found in the BCM2711 has 6 outputs and 3 FIFOs, with each output being connected to a pixelvalve, and some muxing between the FIFOs and outputs. Any output cannot feed from any FIFO though, and they all have a bunch of constraints. In order to support this, let's store the possible FIFOs each output can be assigned to in the vc4_crtc_data, and use that information at atomic_check time to iterate over all the CRTCs enabled and assign them FIFOs. The channel assigned is then set in the vc4_crtc_state so that the rest of the driver can use it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/f9aba3814ef37156ff36f310118cdd3954dd3dc5.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: kms: Convert to for_each_new_crtc_stateMaxime Ripard1-4/+6
The vc4 atomic commit loop has an handrolled loop that is basically identical to for_each_new_crtc_state, let's convert it to that helper. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/a712d2b70aaee20379cfc52c2141aa2f6e2a9d5b.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Enable and disable the PV in atomic_enable / disableMaxime Ripard1-3/+7
The VIDEN bit in the pixelvalve currently being used to enable or disable the pixelvalve seems to not be enough in some situations, which whill end up with the pixelvalve stalling. In such a case, even re-enabling VIDEN doesn't bring it back and we need to clear the FIFO. This can only be done if the pixelvalve is disabled though. In order to overcome this, we can configure the pixelvalve during mode_set_no_fb by calling vc4_crtc_config_pv, but only enable it in atomic_enable and flush the FIFO there, and in atomic_disable disable the pixelvalve again. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/e97596f62f4df83424d994a23465463ac60f986e.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Use local chan variableMaxime Ripard1-1/+1
The vc4_crtc_handle_page_flip already has a local variable holding the value of vc4_crtc->channel, so let's use it instead. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/439c589baec72ddb89159857a2d078fdd77b02a2.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Rename HVS channel to outputMaxime Ripard4-8/+8
In vc5, the HVS has 6 outputs and 3 FIFOs (or channels), with pixelvalves each being assigned to a given output, but each output can then be muxed to feed from multiple FIFOs. Since vc4 had that entirely static, both were probably equivalent, but since that changes, let's rename hvs_channel to hvs_output in the vc4_crtc_data, since a pixelvalve is really connected to an output, and not to a FIFO. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/b7618bb17b1c435c5d6ce50bcde2fe9243281d02.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Move the cob allocation outside of bindMaxime Ripard2-20/+17
The COB allocation depends on the HVS channel used for a given pixelvalve. While the channel allocation was entirely static in vc4, vc5 changes that and at bind time, a pixelvalve can be assigned to multiple HVS channels. Let's prepare that rework by allocating the COB when it's actually needed. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/484cbd4b00cfeee425295df438222258cc39a3dd.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Use a shared interruptMaxime Ripard1-1/+3
Some pixelvalves in vc5 use the same interrupt line so let's register our interrupt handler as a shared one. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/5a915d374357f41083ac71779fa9b2c35a339c2f.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Deal with different number of pixel per clockMaxime Ripard2-7/+14
Some of the HDMI pixelvalves in vc5 output two pixels per clock cycle. Let's put the number of pixel output per clock cycle in the CRTC data and update the various calculations to reflect that. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/18a3bb079981ba820132b37e736a4bb371234d2e.1599120059.git-series.maxime@cerno.tech
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-20 01:55:15 +0000