summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2021-04-14drm/aperture: Convert drivers to aperture interfacesThomas Zimmermann19-56/+67
Mass-convert all drivers from FB helpers to aperture interfaces. No functional changes besides checking for returned errno codes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-3-tzimmermann@suse.de
2021-04-14drm/aperture: Add infrastructure for aperture ownershipThomas Zimmermann2-1/+115
Platform devices might operate on firmware framebuffers, such as VESA or EFI. Before a native driver for the graphics hardware can take over the device, it has to remove any platform driver that operates on the firmware framebuffer. Aperture helpers provide the infrastructure for native drivers to remove the generic ones. For now, this only concerns generic fbdev drivers. Code for removing these is provided by drm_fb_helper_remove_conflicting_framebuffers() et al. Simply wrap these functions for now. At a later point, code can be added for generic DRM drivers to acquire firmware framebuffers. v2: * fix docs for drm_aperture_remove_framebuffers() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-2-tzimmermann@suse.de
2021-04-13drm: bridge: cdns-mhdp8546: Enable HDCPParshuram Thombare5-13/+801
This patch enable HDCP in MHDP driver. Signed-off-by: Parshuram Thombare <pthombar@cadence.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1618078542-30679-1-git-send-email-pthombar@cadence.com
2021-04-12drm: drm_atomic_helper.c: Correct comments formatFabio M. De Francesco1-11/+21
Corrected comments format in accordance to the Linux style guides. Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210412124213.4628-3-fmdefrancesco@gmail.com
2021-04-12drm: drm_atomic_helper.c: Replace "unsigned" with "unsigned int"Fabio M. De Francesco1-4/+4
Replaced "unsigned with "unsigned int" since the latter is preferred. Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210412124213.4628-2-fmdefrancesco@gmail.com
2021-04-12gpu: drm: Replace bare "unsigned" with "unsigned int"Fabio M. De Francesco1-2/+2
Replaced the type "unsigned" with "unsigned int" because it is preferred. Issue detected by checkpatch.pl. Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210412105309.27156-1-fmdefrancesco@gmail.com
2021-04-12drm/ttm: re-add debugfs tt_shrink fileChristian König1-0/+20
That got lost when we moved back to a static limit. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210409130113.1459-2-christian.koenig@amd.com
2021-04-12drm/ttm: fix return value checkChristian König1-1/+1
The function returns the number of swapped pages here. Only abort when we get a negative error code. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210409130113.1459-1-christian.koenig@amd.com
2021-04-11drm/qxl: Use drm_gem_ttm_dumb_map_offset()Thomas Zimmermann5-28/+4
Qxl now uses drm_gem_ttm_dumb_map_offset() to implement struct drm_driver.dumb_map_offset. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210408140139.27731-5-tzimmermann@suse.de
2021-04-11drm/nouveau: Use drm_gem_ttm_dumb_map_offset()Thomas Zimmermann3-21/+2
Nouveau now uses drm_gem_ttm_dumb_map_offset() to implement struct drm_driver.dumb_map_offset. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210408140139.27731-4-tzimmermann@suse.de
2021-04-11drm/vram-helper: Use drm_gem_ttm_dumb_map_offset()Thomas Zimmermann2-49/+1
VRAM helpers now use drm_gem_ttm_dumb_map_offset() to implement struct drm_driver.dumb_map_offset. v2: * update hibmc as well (kernel test robot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210408140139.27731-3-tzimmermann@suse.de
2021-04-11drm/gem-ttm-helper: Provide helper for struct drm_driver.dumb_map_offsetThomas Zimmermann1-0/+33
Provides an implementation of struct drm_driver.dumb_map_offset that can be used by TTM-based GEM drivers. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210408140139.27731-2-tzimmermann@suse.de
2021-04-09drm/ttm: make global mutex and use count staticChristian König1-2/+2
Only needed during device hot plug and remove and not exported. Signed-off-by: Christian König <christian.koenig@amd.com> Suggested-by: Bernard <bernard@vivo.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210409110730.2958-1-christian.koenig@amd.com
2021-04-08drm/panel: Convert sysfs sprintf/snprintf family to sysfs_emitTian Tao1-2/+2
Fix the following coccicheck warning: drivers/gpu/drm/panel//panel-tpo-td043mtea1.c:217:8-16: WARNING: use scnprintf or sprintf drivers/gpu/drm/panel//panel-tpo-td043mtea1.c:189:8-16: WARNING: use scnprintf or sprintf Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1617069288-8317-1-git-send-email-tiantao6@hisilicon.com
2021-04-08drm/dp_mst: Drop DRM_ERROR() on kzalloc() fail in drm_dp_mst_handle_up_req()Lyude Paul1-3/+2
Checkpatch was complaining about this - there's no need for us to print errors when kzalloc() fails, as kzalloc() will already WARN for us. So, let's fix that before converting things to make checkpatch happy. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Robert Foss <robert.foss@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-20-lyude@redhat.com
2021-04-08drm/tegra: Don't register DP AUX channels before connectorsLyude Paul1-5/+6
As pointed out by the documentation for drm_dp_aux_register(), drm_dp_aux_init() should be used in situations where the AUX channel for a display driver can potentially be registered before it's respective DRM driver. This is the case with Tegra, since the DP aux channel exists as a platform device instead of being a grandchild of the DRM device. Since we're about to add a backpointer to a DP AUX channel's respective DRM device, let's fix this so that we don't potentially allow userspace to use the AUX channel before we've associated it with it's DRM connector. Signed-off-by: Lyude Paul <lyude@redhat.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-3-lyude@redhat.com
2021-04-08gma500: Use DEFINE_SPINLOCK() for spinlockGuobin Huang1-2/+1
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Guobin Huang <huangguobin4@huawei.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1617710114-48071-1-git-send-email-huangguobin4@huawei.com
2021-04-08drm/drm_internal.h: Remove repeated struct declarationWan Jiabing1-1/+0
struct drm_gem_object is declared twice. One is declared at 40th line. The blew one is not needed. Remove the duplicate. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210401081704.1000863-1-wanjiabing@vivo.com
2021-04-08drm: xlnx: zynqmp: fix a memset in zynqmp_dp_train()Dan Carpenter1-1/+1
The dp->train_set[] for this driver is only two characters, not four so this memsets too much. Fortunately, this ends up corrupting a struct hole and not anything important. Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/YGLwCBMotnrKZu6P@mwanda
2021-04-08drm/bridge: fix typo in KconfigDafna Hirschfeld1-1/+1
fix 's/controller/controllers/' in the sentence: Most display controller handle display connectors... Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210326103216.7918-2-dafna.hirschfeld@collabora.com
2021-04-08drm/ttm: ioremap buffer according to TTM mem caching settingOak Zeng1-0/+14
If tbo.mem.bus.caching is cached, buffer is intended to be mapped as cached from CPU. Map it with ioremap_cache. This wasn't necessary before as device memory was never mapped as cached from CPU side. It becomes necessary for aldebaran as device memory is mapped cached from CPU. Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Christian Konig <Christian.Koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/1614638628-10508-1-git-send-email-Oak.Zeng@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
2021-04-08drm/ttm: Ignore signaled move fencesFelix Kuehling1-1/+2
Move fences that have already signaled should not prevent memory allocations with no_wait_gpu. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210227034524.21763-1-Felix.Kuehling@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
2021-04-08drm/syncobj: use newly allocated stub fencesDavid Stevens1-6/+19
Allocate a new private stub fence in drm_syncobj_assign_null_handle, instead of using a static stub fence. When userspace creates a fence with DRM_SYNCOBJ_CREATE_SIGNALED or when userspace signals a fence via DRM_IOCTL_SYNCOBJ_SIGNAL, the timestamp obtained when the fence is exported and queried with SYNC_IOC_FILE_INFO should match when the fence's status was changed from the perspective of userspace, which is during the respective ioctl. When a static stub fence started being used in by these ioctls, this behavior changed. Instead, the timestamp returned by SYNC_IOC_FILE_INFO became the first time anything used the static stub fence, which has no meaning to userspace. Signed-off-by: David Stevens <stevensd@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210408095428.3983055-1-stevensd@google.com Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2021-04-08drm/bridge: lt8912b: Add header file <linux/gpio/consumer.h>Zhang Jianhua1-0/+1
If CONFIG_DRM_LONTIUM_LT8912B=m, the following errors will be seen while compiling lontium-lt8912b.c drivers/gpu/drm/bridge/lontium-lt8912b.c: In function ‘lt8912_hard_power_on’: drivers/gpu/drm/bridge/lontium-lt8912b.c:252:2: error: implicit declaration of function ‘gpiod_set_value_cansleep’; did you mean ‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration] gpiod_set_value_cansleep(lt->gp_reset, 0); ^~~~~~~~~~~~~~~~~~~~~~~~ gpio_set_value_cansleep drivers/gpu/drm/bridge/lontium-lt8912b.c: In function ‘lt8912_parse_dt’: drivers/gpu/drm/bridge/lontium-lt8912b.c:628:13: error: implicit declaration of function ‘devm_gpiod_get_optional’; did you mean ‘devm_gpio_request_one’? [-Werror=implicit-function-declaration] gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); ^~~~~~~~~~~~~~~~~~~~~~~ devm_gpio_request_one drivers/gpu/drm/bridge/lontium-lt8912b.c:628:51: error: ‘GPIOD_OUT_HIGH’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’? gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); ^~~~~~~~~~~~~~ GPIOF_INIT_HIGH Signed-off-by: Zhang Jianhua <zhangjianhua18@huawei.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210408093822.207917-1-zhangjianhua18@huawei.com
2021-04-01drm/vblank: Do not store a new vblank timestamp in drm_vblank_restore()Ville Syrjälä1-1/+2
drm_vblank_restore() exists because certain power saving states can clobber the hardware frame counter. The way it does this is by guesstimating how many frames were missed purely based on the difference between the last stored timestamp vs. a newly sampled timestamp. If we should call this function before a full frame has elapsed since we sampled the last timestamp we would end up with a possibly slightly different timestamp value for the same frame. Currently we will happily overwrite the already stored timestamp for the frame with the new value. This could cause userspace to observe two different timestamps for the same frame (and the timestamp could even go backwards depending on how much error we introduce when correcting the timestamp based on the scanout position). To avoid that let's not update the stored timestamp at all, and instead we just fix up the last recorded hw vblank counter value such that the already stored timestamp/seq number will match. Thus the next time a vblank irq happens it will calculate the correct diff between the current and stored hw vblank counter values. Sidenote: Another possible idea that came to mind would be to do this correction only if the power really was removed since the last time we sampled the hw frame counter. But to do that we would need a robust way to detect when it has occurred. Some possibilities could involve some kind of hardare power well transition counter, or potentially we could store a magic value in a scratch register that lives in the same power well. But I'm not sure either of those exist, so would need an actual investigation to find out. All of that is very hardware specific of course, so would have to be done in the driver code. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210218160305.16711-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-04-01drm: Refuse to create zero width/height cmdline modesVille Syrjälä1-0/+3
If the user specifies zero width/height cmdline mode i915 will blow up as the fbdev path will bypass the regular fb sanity check that would otherwise have refused to create a framebuffer with zero width/height. The reason I thought to try this is so that I can force a specific depth for fbdev without actually having to hardcode the mode on the kernel cmdline. Eg. if I pass video=0x0-8 I will get an 8bpp framebuffer at my monitor's native resolution. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190607162611.23514-2-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-04-01drivers: gpu: drm: bridge: fix kconfig dependency on DRM_KMS_HELPERJulian Braha1-0/+1
When DRM_TOSHIBA_TC358762 is enabled and DRM_KMS_HELPER is disabled, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for DRM_PANEL_BRIDGE Depends on [n]: HAS_IOMEM [=y] && DRM_BRIDGE [=y] && DRM_KMS_HELPER [=n] Selected by [y]: - DRM_TOSHIBA_TC358762 [=y] && HAS_IOMEM [=y] && DRM [=y] && DRM_BRIDGE [=y] && OF [=y] This is because DRM_TOSHIBA_TC358762 selects DRM_PANEL_BRIDGE, without depending on or selecting DRM_KMS_HELPER, despite that config option depending on DRM_KMS_HELPER. Signed-off-by: Julian Braha <julianbraha@gmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210222215502.24487-1-julianbraha@gmail.com
2021-04-01drm/komeda: Fix bit check to import to value of proper typeCarsten Haitzler3-16/+22
Another issue found by KASAN. The bit finding is buried inside the dp_for_each_set_bit() macro (that passes on to for_each_set_bit() that calls the bit stuff. These bit functions want an unsigned long pointer as input and just dumbly casting leads to out-of-bounds accesses. This fixes that. Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: James Qian Wang <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210204131102.68658-1-carsten.haitzler@foss.arm.com
2021-04-01drm/komeda: Convert sysfs sprintf/snprintf family to sysfs_emitTian Tao1-3/+3
Fix the following coccicheck warning: drivers/gpu/drm/arm/display/komeda/komeda_dev.c:97:8-16: WARNING: use scnprintf or sprintf drivers/gpu/drm/arm/display/komeda/komeda_dev.c:88:8-16: WARNING: use scnprintf or sprintf drivers/gpu/drm/arm/display/komeda/komeda_dev.c:65:8-16: WARNING: use scnprintf or sprintf Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: James Qian Wang <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/1617067518-31091-1-git-send-email-tiantao6@hisilicon.com
2021-04-01drm/bridge: anx7625: disable regulators when power offHsin-Yi Wang2-0/+35
When suspending the driver, anx7625_power_standby() will be called to turn off reset-gpios and enable-gpios. However, power supplies are not disabled. To save power, the driver can get the power supply regulators and turn off them in anx7625_power_standby(). Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210401053202.159302-2-hsinyi@chromium.org
2021-03-31drm/displayid: rename displayid_hdr to displayid_headerJani Nikula1-5/+5
Avoid any confusion with High Dynamic Range. No functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ce083bd2789c7e22a91710726162287db88e3f6c.1617024940.git.jani.nikula@intel.com
2021-03-31drm/displayid: allow data blocks with 0 payload lengthJani Nikula1-2/+1
The DisplayID specifications explicitly call out 0 as a valid payload length for data blocks. The mere presence of a data block, or the information coded in the block specific data (bits 7:3 in offset 1), may be enough to convey the necessary information. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d562dff99ba7c92accb654a99b433bed471e8507.1617024940.git.jani.nikula@intel.com
2021-03-31drm/edid: use the new displayid iterator for tile infoJani Nikula2-33/+10
Neatly reduce displayid boilerplate in code. Remove excessive debug logging while at it, no other functional changes. The old displayid iterator becomes unused; remove it as well as make drm_find_displayid_extension() static. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/fa4b5c790b5bdd82063545a6f209f8e9d78a63a7.1617024940.git.jani.nikula@intel.com
2021-03-31drm/edid: use the new displayid iterator for finding CEA extensionJani Nikula1-16/+9
Neatly reduce displayid boilerplate in code. No functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e50f876cecbfee369da887ad19350eee0d89b87f.1617024940.git.jani.nikula@intel.com
2021-03-31drm/edid: use the new displayid iterator for detailed modesJani Nikula1-17/+6
Neatly reduce displayid boilerplate in code. No functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f6c69c545c553c4a616887540660a4b8aecf0f7f.1617024940.git.jani.nikula@intel.com
2021-03-31drm/displayid: add new displayid section/block iteratorsJani Nikula1-0/+74
Iterating DisplayID blocks across sections (in EDID extensions) is unnecessarily complicated for the caller. Implement DisplayID iterators to go through all blocks in all sections. Usage example: const struct displayid_block *block; struct displayid_iter iter; displayid_iter_edid_begin(edid, &iter); displayid_iter_for_each(block, &iter) { /* operate on block */ } displayid_iter_end(&iter); When DisplayID is stored in EDID extensions, the DisplayID sections map to extensions as described in VESA DisplayID v1.3 Appendix B: DisplayID as an EDID Extension. This is implemented here. When DisplayID is stored in its dedicated DDC device 0xA4, according to VESA E-DDC v1.3, different rules apply for the structure. This is not implemented here, as we don't currently use it, but the idea is you'd have a different call for beginning the iteration, for example simply: displayid_iter_begin(displayid, &iter); instead of displayid_iter_edid_begin(), and everything else would be hidden away in the iterator functions. v2: - sizeof(struct displayid_block) -> sizeof(*block) (Ville) - remove __ prefix from displayid_iter_block Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/da3dead1752ab16c061f7bd248ac1a4268f7fefb.1617024940.git.jani.nikula@intel.com
2021-03-31drm/displayid: add separate drm_displayid.cJani Nikula3-57/+62
We'll be adding more DisplayID specific functions going forward, so start off by splitting out a few functions to a separate file. We don't bother with exporting the functions; at least for now they should be needed solely within drm.ko. No functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/07942d5011891b8e8f77245c78b34f4af97a9315.1617024940.git.jani.nikula@intel.com
2021-03-31drm/edid: make a number of functions, parameters and variables constJani Nikula1-29/+29
If there's no need to change it, it should be const. There's more to be done, but start off with changes that make follow-up work easier. No functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/41722f92ef81cd6adf65f936fcc5301418e1f94b.1617024940.git.jani.nikula@intel.com
2021-03-29drm/ingenic: Register devm action to cleanup encodersPaul Cercueil1-10/+7
Since the encoders have been devm-allocated, they will be freed way before drm_mode_config_cleanup() is called. To avoid use-after-free conditions, we then must ensure that drm_encoder_cleanup() is called before the encoders are freed. v2: Use the new __drmm_simple_encoder_alloc() function v3: Use the new drmm_plain_simple_encoder_alloc() macro v4: Use drmm_plain_encoder_alloc() macro Fixes: c369cb27c267 ("drm/ingenic: Support multiple panels/bridges") Cc: <stable@vger.kernel.org> # 5.8+ Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210327115742.18986-4-paul@crapouillou.net
2021-03-29drm: bridge/panel: Cleanup connector on bridge detachPaul Cercueil1-0/+12
If we don't call drm_connector_cleanup() manually in panel_bridge_detach(), the connector will be cleaned up with the other DRM objects in the call to drm_mode_config_cleanup(). However, since our drm_connector is devm-allocated, by the time drm_mode_config_cleanup() will be called, our connector will be long gone. Therefore, the connector must be cleaned up when the bridge is detached to avoid use-after-free conditions. v2: Cleanup connector only if it was created v3: Add FIXME v4: (Use connector->dev) directly in if() block Fixes: 13dfc0540a57 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bridge.") Cc: <stable@vger.kernel.org> # 4.12+ Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210327115742.18986-2-paul@crapouillou.net
2021-03-29drm/ttm: switch back to static allocation limits for nowChristian König2-74/+52
The shrinker based approach still has some flaws. Especially that we need temporary pages to free up the pages allocated to the driver is problematic in a shrinker. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210324134845.2338-1-christian.koenig@amd.com
2021-03-26drm/mst: Enhance MST topology loggingEryk Brol1-11/+48
[why] MST topology print was missing fec logging and pdt printed as an int wasn't clear. vcpi and payload info was printed as an arbitrary series of ints which requires user to know the ordering of the prints, making the logs difficult to use. [how] -add fec logging -add pdt parsing into strings -format vcpi and payload info into tables with headings -clean up topology prints Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Eryk Brol <eryk.brol@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325180614.37060-1-eryk.brol@amd.com
2021-03-26drm/ttm: fix invalid NULL derefChristian König1-3/+3
The BO might be NULL in this function, use the bdev directly. Signed-off-by: Christian König <christian.koenig@amd.com> Reported-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Colin Ian King <colin.king@canonical.com> Fixes: a1f091f8ef2b ("drm/ttm: switch to per device LRU lock") Link: https://patchwork.freedesktop.org/patch/msgid/20210325152740.82633-1-christian.koenig@amd.com
2021-03-26drm/bridge: Introduce LT8912B DSI to HDMI bridgeAdrien Grassein3-0/+780
Lontium LT8912B is a DSI to HDMI bridge. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210326121955.1266230-3-adrien.grassein@gmail.com
2021-03-26drm: Fix 3 typos in the inline docDafna Hirschfeld1-8/+7
Fix the following typos: 1. When mentioning a list of functions, the function drm_atomic_helper_disable_plane is mentioned twice. 2. drop the word 'afterwards': s/afterwards after that/after that/' 3. drop extra 'the': s/but do not the support the full/but do not support the full/ Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Simon Ser <contact@emersion.fr> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20210326103216.7918-1-dafna.hirschfeld@collabora.com
2021-03-26drm/omap: Remove duplicate declarationWan Jiabing1-5/+4
struct dss_device has been declared. Remove the duplicate. And sort these forward declarations alphabetically. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325111028.864628-1-wanjiabing@vivo.com
2021-03-26drm/omap: dsi: Add missing IRQF_ONESHOTYang Li1-1/+2
fixed the following coccicheck: ./drivers/gpu/drm/omapdrm/dss/dsi.c:4329:7-27: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Fixes: 4c1b935fea54 ("drm/omap: dsi: move TE GPIO handling into core") Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/1616492093-68237-1-git-send-email-yang.lee@linux.alibaba.com
2021-03-26drm/omap: fix misleading indentation in pixinc()Arnd Bergmann1-3/+2
An old patch added a 'return' statement after each BUG() in this driver, which was necessary at the time, but has become redundant after the BUG() definition was updated to handle this properly. gcc-11 now warns about one such instance, where the 'return' statement was incorrectly indented: drivers/gpu/drm/omapdrm/dss/dispc.c: In function ‘pixinc’: drivers/gpu/drm/omapdrm/dss/dispc.c:2093:9: error: this ‘else’ clause does not guard... [-Werror=misleading-indentation] 2093 | else | ^~~~ drivers/gpu/drm/omapdrm/dss/dispc.c:2095:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘else’ 2095 | return 0; | ^~~~~~ Address this by removing the return again and changing the BUG() to be unconditional to make this more intuitive. Fixes: c6eee968d40d ("OMAPDSS: remove compiler warnings when CONFIG_BUG=n") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210322164203.827324-1-arnd@kernel.org
2021-03-25drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridgeJagan Teki3-0/+307
ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone. It has a flexible configuration of MIPI DSI signal input and produce RGB565, RGB666, RGB888 output format. Add bridge driver for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210322103328.66442-2-jagan@amarulasolutions.com
2021-03-25drm: bridge: convert sysfs sprintf/snprintf family to sysfs_emitJiapeng Chong1-1/+1
Fix the following coccicheck warning: drivers/gpu/drm/bridge/lontium-lt9611uxc.c:858:8-16: WARNING: use scnprintf or sprintf. Reported-by: Abaci Robot<abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1612689000-64577-1-git-send-email-jiapeng.chong@linux.alibaba.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-23 08:21:17 +0000