summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2016-12-23Merge tag 'drm-intel-next-fixes-2016-12-22' of ↵Dave Airlie12-95/+186
git://anongit.freedesktop.org/git/drm-intel into drm-fixes First set of i915 fixes for code in next. * tag 'drm-intel-next-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: skip the first 4k of stolen memory on everything >= gen8 drm/i915: Fallback to single PAGE_SIZE segments for DMA remapping drm/i915: Fix use after free in logical_render_ring_init drm/i915: disable PSR by default on HSW/BDW drm/i915: Fix setting of boost freq tunable drm/i915: tune down the fast link training vs boot fail drm/i915: Reorder phys backing storage release drm/i915/gen9: Fix PCODE polling during SAGV disabling drm/i915/gen9: Fix PCODE polling during CDCLK change notification drm/i915/dsi: Fix chv_exec_gpio disabling the GPIOs it is setting drm/i915/dsi: Fix swapping of MIPI_SEQ_DEASSERT_RESET / MIPI_SEQ_ASSERT_RESET drm/i915/dsi: Do not clear DPOUNIT_CLOCK_GATE_DISABLE from vlv_init_display_clock_gating drm/i915: drop the struct_mutex when wedged or trying to reset
2016-12-23Merge tag 'drm-misc-fixes-2016-12-22' of ↵Dave Airlie1-2/+5
git://anongit.freedesktop.org/git/drm-misc into drm-fixes Here's the one lonely bugfix I talked about on irc. * tag 'drm-misc-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-misc: drivers/gpu/drm/ast: Fix infinite loop if read fails
2016-12-23Merge branch 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie7-631/+1218
into drm-fixes - fix display regression on DCE6/8 - Powergating fixes for GFX8 - amdgpu SI fixes (golden settings, proper rev id setup, etc.) * 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (21 commits) drm/amdgpu: update tile table for oland/hainan drm/amdgpu: update tile table for verde drm/amdgpu: update rev id for verde drm/amdgpu: update golden setting for verde drm/amdgpu: update rev id for oland drm/amdgpu: update golden setting for oland drm/amdgpu: update rev id for hainan drm/amdgpu: update golden setting for hainan drm/amdgpu: update rev id for pitcairn drm/amdgpu: update golden setting for pitcairn drm/amdgpu: update golden setting/tiling table of tahiti drm/amdgpu: fix cursor setting of dce6/dce8 drm/amdgpu: refine set clock gating for tonga/polaris drm/amdgpu: initialize cg flags for tonga/polaris10/polaris11. drm/amdgpu: add new gfx cg flags. drm/amdgpu: fix pg can't be disabled by PG mask. drm/amdgpu: always initialize gfx pg for gfx_v8.0. drm/amdgpu: enable AMD_PG_SUPPORT_CP in Carrizo/Stoney. drm/amdgpu: fix init save/restore list in gfx_v8.0 drm/amdgpu: fix enable_cp_power_gating in gfx_v8.0. ...
2016-12-22Merge tag 'acpi-extra-4.10-rc1' of ↵Linus Torvalds2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "Here are new versions of two ACPICA changes that were deferred previously due to a problem they had introduced, two cleanups on top of them and the removal of a useless warning message from the ACPI core. Specifics: - Move some Linux-specific functionality to upstream ACPICA and update the in-kernel users of it accordingly (Lv Zheng) - Drop a useless warning (triggered by the lack of an optional object) from the ACPI namespace scanning code (Zhang Rui)" * tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory() ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users ACPICA: Tables: Allow FADT to be customized with virtual address ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel ACPI: do not warn if _BQC does not exist
2016-12-22Merge branches 'acpica' and 'acpi-scan'Rafael J. Wysocki2-2/+4
* acpica: ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory() ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users ACPICA: Tables: Allow FADT to be customized with virtual address ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel * acpi-scan: ACPI: do not warn if _BQC does not exist
2016-12-21ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() usersLv Zheng2-2/+4
This patch removes the users of the deprectated APIs: acpi_get_table_with_size() early_acpi_os_unmap_memory() The following APIs should be used instead of: acpi_get_table() acpi_put_table() The deprecated APIs are invented to be a replacement of acpi_get_table() during the early stage so that the early mapped pointer will not be stored in ACPICA core and thus the late stage acpi_get_table() won't return a wrong pointer. The mapping size is returned just because it is required by early_acpi_os_unmap_memory() to unmap the pointer during early stage. But as the mapping size equals to the acpi_table_header.length (see acpi_tb_init_table_descriptor() and acpi_tb_validate_table()), when such a convenient result is returned, driver code will start to use it instead of accessing acpi_table_header to obtain the length. Thus this patch cleans up the drivers by replacing returned table size with acpi_table_header.length, and should be a no-op. Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-20drm/amdgpu: update tile table for oland/hainanFlora Cui1-139/+191
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-12-20drm/amdgpu: update tile table for verdeFlora Cui1-2/+293
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-12-20drm/amdgpu: update rev id for verdeFlora Cui1-1/+1
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-12-20drm/amdgpu: update golden setting for verdeFlora Cui1-162/+142
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-12-20drm/amdgpu: update rev id for olandFlora Cui1-0/+1
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-12-20drm/amdgpu: update golden setting for olandFlora Cui1-13/+19
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-12-20drm/amdgpu: update rev id for hainanFlora Cui1-0/+1
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-12-20drm/amdgpu: update golden setting for hainanFlora Cui1-14/+23
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-12-20drm/amdgpu: update rev id for pitcairnFlora Cui1-0/+1
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-12-20drm/amdgpu: update golden setting for pitcairnFlora Cui1-10/+16
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-12-20drm/amdgpu: update golden setting/tiling table of tahitiFlora Cui2-161/+221
Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-12-20drm/i915: skip the first 4k of stolen memory on everything >= gen8Paulo Zanoni1-3/+2
BSpec got updated and this workaround is now listed as standard required programming for all subsequent projects. This is confirmed to fix Skylake screen flickering issues (probably caused by the fact that we initialized a ring in the first page of stolen, but I didn't 100% confirm this theory). v2: this is the patch that fixes the screen flickering, document it. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605 Cc: stable@vger.kernel.org Tested-by: Dominik Klementowski <dominik232@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1481727338-9901-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit d43537610470d8829ebd17cd7842f47176e35ebd) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915: Fallback to single PAGE_SIZE segments for DMA remappingChris Wilson1-4/+22
If we at first do not succeed with attempting to remap our physical pages using a coalesced scattergather list, try again with one scattergather entry per page. This should help with swiotlb as it uses a limited buffer size and only searches for contiguous chunks within its buffer aligned up to the next boundary - i.e. we may prematurely cause a failure as we are unable to utilize the unused space between large chunks and trigger an error such as: i915 0000:00:02.0: swiotlb buffer is full (sz: 1630208 bytes) Reported-by: Juergen Gross <jgross@suse.com> Tested-by: Juergen Gross <jgross@suse.com> Fixes: 871dfbd67d4e ("drm/i915: Allow compaction upto SWIOTLB max segment size") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: <drm-intel-fixes@lists.freedesktop.org> Link: http://patchwork.freedesktop.org/patch/msgid/20161219124346.550-1-chris@chris-wilson.co.uk Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit d766ef53006c2c38a7fe2bef0904105a793383f2) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915: Fix use after free in logical_render_ring_initTvrtko Ursulin1-6/+1
Commit 3b3f1650b1ca ("drm/i915: Allocate intel_engine_cs structure only for the enabled engines") introduced the dynanically allocated engine instances and created an potential use after free scenario in logical_render_ring_init where lrc_destroy_wa_ctx_obj could be called after the engine instance has been freed. This can only happen during engine setup/init error handling which luckily does not happen ever in practice. Fix is to not call lrc_destroy_wa_ctx_obj since it would have already been executed from the preceding engine cleanup. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 3b3f1650b1ca ("drm/i915: Allocate intel_engine_cs structure only for the enabled engines") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1481894322-2145-1-git-send-email-tvrtko.ursulin@linux.intel.com (cherry picked from commit d038fc7e4fff14d6b026130007faef35cbf5e956) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915: disable PSR by default on HSW/BDWPaulo Zanoni1-7/+3
We've been ignoring the poor bugzilla reporters that say PSR causes system lockups and all other sorts of problems. The earliest bug report is from April, so I think we can use the "revert the offending commit if no fixes are presented within 8 months" rule here. Fixes: 9b58e352b463 ("drm/i915: Enable PSR by default on Haswell and Broadwell.") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97602 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97515 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96736 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96704 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96569 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95176 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94985 Cc: <stable@vger.kernel.org> # v4.6+ Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481662664-18986-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit 2ee7dc497e348eecbb82adbb1ea9e9a7e29fe921) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915: Fix setting of boost freq tunableMika Kuoppala1-1/+1
For limiting the max frequency of gpu, the max freq tunable is not enough to hard limit the max gap. We now have also per client boost max freq. When this tunable was introduced, it was mistakenly made read only. Allow user to gain control by setting it writable. Fixes: 29ecd78d3b79 ("drm/i915: Define a separate variable and control for RPS waitboost frequency") Cc: <stable@vger.kernel.org> # v4.9+ Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481718380-9170-1-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 73a798711314b54cbd4fe224e24db92c306a8d8c) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915: tune down the fast link training vs boot failDaniel Vetter1-2/+2
It's been unfixed since a while and no one is immediately working on this. And we have the FIXME already. And now also a task in the DP team's backlog. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> References: https://lists.freedesktop.org/archives/intel-gfx/2016-July/101951.html Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Adjust comment per Ville's feedback.] Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161213195414.28923-1-daniel.vetter@ffwll.ch (cherry picked from commit 2dd85aeb5bc99e3763dd192cdb95ff405a102c8a) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915: Reorder phys backing storage releaseChris Wilson1-19/+34
In commit a4f5ea64f0a8 ("drm/i915: Refactor object page API"), I reordered the object->pages teardown to be more friendly wrt to a separate obj->mm.lock. However, I overlooked the phys object and left it with a dangling use-after-free of its phys_handle. Move the allocation of the phys handle to get_pages and it release to put_pages to prevent the invalid access and to improve symmetry. v2: Add commentary about always aligning to page size. Testcase: igt/drv_selftest/objects Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: a4f5ea64f0a8 ("drm/i915: Refactor object page API") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161207133411.8028-1-chris@chris-wilson.co.uk (cherry picked from commit dbb4351bab0a8440f6b02895c142bce6c30b7097) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915/gen9: Fix PCODE polling during SAGV disablingImre Deak1-25/+9
According to the previous patch, it's possible atm that we call intel_do_sagv_disable() only once during the 1ms period and time out if that call fails. As opposed to this the spec says that we need to keep retrying this request for a 1ms duration, so let's do this similarly to the CDCLK change notification request. v4-5: - Rebased on the reply_mask, reply change. v6: - Remove w/s change. (Lyude) - Rebased on the timeout_base argument change. Cc: Lyude <cpaul@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 656d1b89e5ff ("drm/i915/skl: Add support for the SAGV, fix underrun hangs") Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude <lyude@redhat.com> (v4) Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-2-git-send-email-imre.deak@intel.com (cherry picked from commit b3b8e99984a4eace91bc097e8f8cec71441cae16) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915/gen9: Fix PCODE polling during CDCLK change notificationImre Deak3-21/+87
commit 848496e5902833600f7992f4faa82dc1546051ba Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Jul 13 16:32:03 2016 +0300 drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL increased the timeout to match the spec, but we still see a timeout on at least one SKL. A CDCLK change request following the failed one will succeed nevertheless. I could reproduce this problem easily by running kms_pipe_crc_basic in a loop. In all failure cases _wait_for() was pre-empted for >3ms and so in the worst case - when the pre-emption happened right after calculating timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only once which failed and so _wait_for() timed out. As opposed to this the spec says to keep retrying the request for at most a 3ms period. To fix this send the first request explicitly to guarantee that there is 3ms between the first and last request. Though this matches the spec, I noticed that in rare cases this can still time out if we sent only a few requests (in the worst case 2) _and_ PCODE is busy for some reason even after a previous request and a 3ms delay. To work around this retry the polling with pre-emption disabled to maximize the number of requests. Also increase the timeout to 10ms to account for interrupts that could reduce the number of requests. With this change I couldn't trigger the problem. v2: - Use 1ms poll period instead of 10us. (Chris) v3: - Poll with pre-emption disabled to increase the number of request attempts. (Ville, Chris) - Factor out a helper to poll, it's also needed by the next patch. v4: - Pass reply_mask, reply to skl_pcode_request(), instead of assuming the reply is generic. (Ville) v5: - List the request specific timeout values as code comment. (Ville) v6: - Try the poll first with preemption enabled. - Add code comment about first request being queued by PCODE. (Art) - Add timeout_base_ms argument. (Ville) v7: - Clarify code comment about first queued request. (Chris) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Art Runyan <arthur.j.runyan@intel.com> Cc: <stable@vger.kernel.org> # v4.2- : 3b2c171 : drm/i915: Wait up to 3ms Cc: <stable@vger.kernel.org> # v4.2- Fixes: 5d96d8afcfbb ("drm/i915/skl: Deinit/init the display at suspend/resume") Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929 Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-1-git-send-email-imre.deak@intel.com (cherry picked from commit a0b8a1fe34430c3a82258e8cb45f5968bdf31afd) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915/dsi: Fix chv_exec_gpio disabling the GPIOs it is settingHans de Goede1-1/+2
Set the CHV_GPIO_GPIOEN bit when updating GPIOs from chv_exec_gpio. Fixes: a0a6d4ffd2ad ("drm/i915/dsi: add support for gpio elements on CHV") Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161201202925.12220-3-hdegoede@redhat.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit b2b45fcd921e864a5e9bbc7aa55dee96d5e11c06) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915/dsi: Fix swapping of MIPI_SEQ_DEASSERT_RESET / MIPI_SEQ_ASSERT_RESETHans de Goede2-5/+11
Looking at the ADF code from the Android kernel sources for a cherrytrail tablet I noticed that it is calling the MIPI_SEQ_ASSERT_RESET sequence from the panel prepare hook. Until commit b1cb1bd29189 ("drm/i915/dsi: update reset and power sequences in panel prepare/unprepare hooks") the mainline i915 code was doing the same. That commits effectively swaps the calling of MIPI_SEQ_ASSERT_RESET / MIPI_SEQ_DEASSERT_RESET. Looking at the naming of the sequences that is the right thing to do, but the problem is, that the old mainline code and the ADF code was actually calling the right sequence (tested on a cube iwork8 air tablet), and the swapping of the calling breaks things. This breakage was likely not noticed in testing because on cherrytrail, currently chv_exec_gpio ends up disabling the gpio pins rather then setting them (this is fixed in the next patch in this patch-set). This commit fixes the swapping by fixing MIPI_SEQ_ASSERT/DEASSERT_RESET's places in the enum defining them, so that their (new) names match their actual use. Changes in v2: -Add a comment to the enum explaining that the assert/reassert names are swapped in the spec Fixes: b1cb1bd29189 ("drm/i915/dsi: update reset and power sequences...") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161202150128.29871-1-hdegoede@redhat.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 2b8208ac93be2783edc627fc02d9ca50cc479923) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915/dsi: Do not clear DPOUNIT_CLOCK_GATE_DISABLE from ↵Hans de Goede1-1/+12
vlv_init_display_clock_gating On my Cherrytrail CUBE iwork8 Air tablet PIPE-A would get stuck on loading i915 at boot 1 out of every 3 boots, resulting in a non functional LCD. Once the i915 driver has successfully loaded, the panel can be disabled / enabled without hitting this issue. The getting stuck is caused by vlv_init_display_clock_gating() clearing the DPOUNIT_CLOCK_GATE_DISABLE bit in DSPCLK_GATE_D when called from chv_pipe_power_well_ops.enable() on driver load, while a pipe is enabled driving the DSI LCD by the BIOS. Clearing this bit while DSI is in use is a known issue and intel_dsi_pre_enable() / intel_dsi_post_disable() already set / clear it as appropriate. This commit modifies vlv_init_display_clock_gating() to leave the DPOUNIT_CLOCK_GATE_DISABLE bit alone fixing the pipe getting stuck. Changes in v2: -Replace PIPE-A with "a pipe" or "the pipe" in the commit msg and comment Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97330 Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161202142904.25613-1-hdegoede@redhat.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 721d484563e1a51ada760089c490cbc47e909756) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-20drm/i915: drop the struct_mutex when wedged or trying to resetMatthew Auld1-1/+2
We grab the struct_mutex in intel_crtc_page_flip, but if we are wedged or a reset is in progress we bail early but never seem to actually release the lock. Fixes: 7f1847ebf48b ("drm/i915: Simplify checking of GPU reset_counter in display pageflips") Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161128103648.9235-1-matthew.auld@intel.com Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v4.7+ (cherry picked from commit ddbb271aea87fc6004d3c8bcdb0710e980c7ec85) Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit e411072d5740a49cdc9d0713798c30440757e451) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-12-19drm/amdgpu: fix cursor setting of dce6/dce8Flora Cui2-7/+1
Fixes: 7c83d7abc999 ("drm/amdgpu: Only update the CUR_SIZE register when necessary") Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-12-18drivers/gpu/drm/ast: Fix infinite loop if read failsRussell Currey1-2/+5
ast_get_dram_info() configures a window in order to access BMC memory. A BMC register can be configured to disallow this, and if so, causes an infinite loop in the ast driver which renders the system unusable. Fix this by erroring out if an error is detected. On powerpc systems with EEH, this leads to the device being fenced and the system continuing to operate. Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Russell Currey <ruscur@russell.cc> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161215051241.20815-1-ruscur@russell.cc
2016-12-17Merge tag 'kvmgt-vfio-mdev-for-v4.10-rc1' of git://github.com/01org/gvt-linuxLinus Torvalds4-61/+923
Pull i915/gvt KVMGT updates from Zhenyu Wang: "KVMGT support depending on the VFIO/mdev framework" * tag 'kvmgt-vfio-mdev-for-v4.10-rc1' of git://github.com/01org/gvt-linux: drm/i915/gvt/kvmgt: add vfio/mdev support to KVMGT drm/i915/gvt/kvmgt: read/write GPA via KVM API drm/i915/gvt/kvmgt: replace kmalloc() by kzalloc()
2016-12-16Merge branch 'for-linus' of ↵Linus Torvalds3-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: - more ->d_init() stuff (work.dcache) - pathname resolution cleanups (work.namei) - a few missing iov_iter primitives - copy_from_iter_full() and friends. Either copy the full requested amount, advance the iterator and return true, or fail, return false and do _not_ advance the iterator. Quite a few open-coded callers converted (and became more readable and harder to fuck up that way) (work.iov_iter) - several assorted patches, the big one being logfs removal * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: logfs: remove from tree vfs: fix put_compat_statfs64() does not handle errors namei: fold should_follow_link() with the step into not-followed link namei: pass both WALK_GET and WALK_MORE to should_follow_link() namei: invert WALK_PUT logics namei: shift interpretation of LOOKUP_FOLLOW inside should_follow_link() namei: saner calling conventions for mountpoint_last() namei.c: get rid of user_path_parent() switch getfrag callbacks to ..._full() primitives make skb_add_data,{_nocache}() and skb_copy_to_page_nocache() advance only on success [iov_iter] new primitives - copy_from_iter_full() and friends don't open-code file_inode() ceph: switch to use of ->d_init() ceph: unify dentry_operations instances lustre: switch to use of ->d_init()
2016-12-16drm/i915/gvt/kvmgt: add vfio/mdev support to KVMGTJike Song4-40/+907
KVMGT leverages vfio/mdev to mediate device accesses from guest, this patch adds the vfio/mdev support, thereby completes the functionality. An intel_vgpu is presented as a mdev device, and full userspace API compatibility with vfio-pci is kept. An intel_vgpu_ops is provided to mdev framework, methods get called to create/remove a vgpu, to open/close it, and to access it. Signed-off-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Xiaoguang Chen <xiaoguang.chen@intel.com> Signed-off-by: Jike Song <jike.song@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-12-16drm/i915/gvt/kvmgt: read/write GPA via KVM APIJike Song1-21/+16
Previously to read/write a GPA, we at first try to pin the GFN it belongs to, then translate the pinned PFN to a kernel HVA, then read/write it. This is however not necessary. A GFN should be pinned IFF it would be accessed by peripheral devices (DMA), not by CPU. This patch changes the read/write method to KVM API, which will leverage userspace HVA and copy_{from|to}_usr instead. Signed-off-by: Jike Song <jike.song@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-12-16drm/i915/gvt/kvmgt: replace kmalloc() by kzalloc()Jike Song1-1/+1
Signed-off-by: Jike Song <jike.song@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2016-12-15drm/amdgpu: refine set clock gating for tonga/polarisRex Zhu2-90/+230
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-12-15drm/amdgpu: initialize cg flags for tonga/polaris10/polaris11.Rex Zhu1-3/+49
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-12-15drm/amdgpu: add new gfx cg flags.Rex Zhu1-0/+4
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-12-15drm/amdgpu: fix pg can't be disabled by PG mask.Rex Zhu1-5/+2
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-12-15drm/amdgpu: always initialize gfx pg for gfx_v8.0.Rex Zhu1-39/+32
v2: always init gfx pg for asics that can support. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-12-15drm/amdgpu: enable AMD_PG_SUPPORT_CP in Carrizo/Stoney.Rex Zhu1-0/+2
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-12-15drm/amdgpu: fix init save/restore list in gfx_v8.0Rex Zhu1-2/+6
set valid data to mmRLC_SRM_INDEX_CNTL_ADDRx/DATAx. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-12-15drm/amdgpu: fix enable_cp_power_gating in gfx_v8.0.Rex Zhu1-1/+1
the CP_PG_DISABLE bit was reversed. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-12-15drm/amdgpu: disable uvd pg on Tonga.Rex Zhu1-1/+1
it does not work with GPU pass through if the VM is not cleanly shutdown leading to a hang when the modules is reloaded. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-12-15drm/virtio: annotate virtio_gpu_queue_ctrl_buffer_lockedMichael S. Tsirkin1-0/+2
virtio_gpu_queue_ctrl_buffer_locked is called with ctrlq.qlock taken, it releases and acquires this lock. This causes a sparse warning. Add appropriate annotations for sparse context checking. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-12-15drm/virtio: fix lock context imbalanceMichael S. Tsirkin1-1/+3
When virtio_gpu_free_vbufs exits due to list empty, it does not drop the free_vbufs lock that it took. list empty is not expected to happen anyway, but it can't hurt to fix this and drop the lock. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-12-15drm/virtio: fix endianness in primary_plane_updateMichael S. Tsirkin1-2/+2
virtio_gpu_cmd_transfer_to_host_2d expects x and y parameters in LE, but virtio_gpu_primary_plane_update passes in the CPU format instead. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-12-14mm: use vmf->address instead of of vmf->virtual_addressJan Kara13-46/+33
Every single user of vmf->virtual_address typed that entry to unsigned long before doing anything with it so the type of virtual_address does not really provide us any additional safety. Just use masked vmf->address which already has the appropriate type. Link: http://lkml.kernel.org/r/1479460644-25076-3-git-send-email-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-04 19:19:22 +0000