summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2019-02-28drm/bochs: Fix the ID mismatch errorAlistair Francis1-0/+4
When running RISC-V QEMU with the Bochs device attached via PCIe the probe of the Bochs device fails with: [drm:bochs_hw_init] *ERROR* ID mismatch This was introduced by this commit: 7780eb9ce8 bochs: convert to drm_dev_register To fix the error we ensure that pci_enable_device() is called before bochs_load(). Fixes: 7780eb9ce80f ("bochs: convert to drm_dev_register") Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reported-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20190221003231.31625-1-alistair.francis@wdc.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-02-28drm: Block fb changes for async plane updatesNicholas Kazlauskas1-0/+9
The prepare_fb call always happens on new_plane_state. The drm_atomic_helper_cleanup_planes checks to see if plane state pointer has changed when deciding to call cleanup_fb on either the new_plane_state or the old_plane_state. For a non-async atomic commit the state pointer is swapped, so this helper calls prepare_fb on the new_plane_state and cleanup_fb on the old_plane_state. This makes sense, since we want to prepare the framebuffer we are going to use and cleanup the the framebuffer we are no longer using. For the async atomic update helpers this differs. The async atomic update helpers perform in-place updates on the existing state. They call drm_atomic_helper_cleanup_planes but the state pointer is not swapped. This means that prepare_fb is called on the new_plane_state and cleanup_fb is called on the new_plane_state (not the old). In the case where old_plane_state->fb == new_plane_state->fb then there should be no behavioral difference between an async update and a non-async commit. But there are issues that arise when old_plane_state->fb != new_plane_state->fb. The first is that the new_plane_state->fb is immediately cleaned up after it has been prepared, so we're using a fb that we shouldn't be. The second occurs during a sequence of async atomic updates and non-async regular atomic commits. Suppose there are two framebuffers being interleaved in a double-buffering scenario, fb1 and fb2: - Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1 - Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2 - Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 We call cleanup_fb on fb2 twice in this example scenario, and any further use will result in use-after-free. The simple fix to this problem is to block framebuffer changes in the drm_atomic_helper_async_check function for now. v2: Move check by itself, add a FIXME (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Cc: <stable@vger.kernel.org> # v4.14+ Fixes: fef9df8b5945 ("drm/atomic: initial support for asynchronous plane update") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/275364/ Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-02-28Merge branch 'drm-fixes-5.0' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie2-4/+24
into drm-fixes Fix for variable refresh rate stuttering Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190227192115.14597-1-alexander.deucher@amd.com
2019-02-27drm/amd/display: Use vrr friendly pageflip throttling in DC.Mario Kleiner2-4/+24
In VRR mode, keep track of the vblank count of the last completed pageflip in amdgpu_crtc->last_flip_vblank, as recorded in the pageflip completion handler after each completed flip. Use that count to prevent mmio programming a new pageflip within the same vblank in which the last pageflip completed, iow. to throttle pageflips to at most one flip per video frame, while at the same time allowing to request a flip not only before start of vblank, but also anywhere within vblank. The old logic did the same, and made sense for regular fixed refresh rate flipping, but in vrr mode it prevents requesting a flip anywhere inside the possibly huge vblank, thereby reducing framerate in vrr mode instead of improving it, by delaying a slightly delayed flip requests up to a maximum vblank duration + 1 scanout duration. This would limit VRR usefulness to only help applications with a very high GPU demand, which can submit the flip request before start of vblank, but then have to wait long for fences to complete. With this method a flip can be both requested and - after fences have completed - executed, ie. it doesn't matter if the request (amdgpu_dm_do_flip()) gets delayed until deep into the extended vblank due to cpu execution delays. This also allows clients which want to regulate framerate within the vrr range a much more fine-grained control of flip timing, a feature that might be useful for video playback, and is very useful for neuroscience/vision research applications. In regular non-VRR mode, retain the old flip submission behavior. This to keep flip scheduling for fullscreen X11/GLX OpenGL clients intact, if they use the GLX_OML_sync_control extensions glXSwapBufferMscOML(, ..., target_msc,...) function with a specific target_msc target vblank count. glXSwapBuffersMscOML() or DRI3/Present PresentPixmap() will not flip at the proper target_msc for a non-zero target_msc if VRR mode is active with this patch. They'd often flip one frame too early. However, this limitation should not matter much in VRR mode, as scheduling based on vblank counts is pretty futile/unusable under variable refresh duration anyway, so no real extra harm is done. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-22Merge branch 'drm-fixes-5.0' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie10-13/+40
into drm-fixes A bit bigger than normal for this week due to fixes for some long standing display issues that are bound for stable. These changes would be going to stable anyway, so I figured it was better via 5.0 than 5.1. - Several display fixes - Fix PX systems due to core changes in runtime pm - Disable bulk moves. They are fixed in 5.1, but fix is too invasive for 5.0 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190220225715.3240-1-alexander.deucher@amd.com
2019-02-20drm/amdgpu: disable bulk moves for nowChristian König1-0/+2
The changes to fix those are two invasive for backporting. Just disable the feature in 4.20 and 5.0. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Cc: <stable@vger.kernel.org> [4.20+] Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-20drm/amd/display: set clocks to 0 on suspend on dce80Bhawanpreet Lakha1-3/+16
[Why] When a dce80 asic was suspended, the clocks were not set to 0. Upon resume, the new clock was compared to the existing clock, they were found to be the same, and so the clock was not set. This resulted in a blackscreen. [How] In atomic commit, check to see if there are any active pipes. If no, set clocks to 0 Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-02-20drm/amd/display: fix optimize_bandwidth func pointer for dce80Bhawanpreet Lakha2-1/+5
[Why] optimize_bandwidth was using dce100_prepare_bandwidth this is incorrect [How] change it to dce100_optimize_bandwidth Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-02-20drm/amd/display: Fix negative cursor pos programmingNicholas Kazlauskas1-2/+2
[Why] If the cursor pos passed from DM is less than the plane_state->dst_rect top left corner then the unsigned cursor pos wraps around to a large positive number since cursor pos is a u32. There was an attempt to guard against this in hubp1_cursor_set_position by checking the src_x_offset and src_y_offset and offseting the cursor hotspot within hubp1_cursor_set_position. However, the cursor position itself is still being programmed incorrectly as a large value. This manifests itself visually as the cursor disappearing or containing strange artifacts near the middle of the screen on raven. [How] Don't subtract the destination rect top left corner from the pos but add it to the hotspot instead. This happens before the pos gets passed into hubp1_cursor_set_position. This achieves the same result but avoids the subtraction wrap around. With this fix the original cursor programming logic can be used again. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Murton Liu <Murton.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-20drm/i915/fbdev: Actually configure untiled displaysChris Wilson1-5/+7
If we skipped all the connectors that were not part of a tile, we would leave conn_seq=0 and conn_configured=0, convincing ourselves that we had stagnated in our configuration attempts. Avoid this situation by starting conn_seq=ALL_CONNECTORS, and repeating until we find no more connectors to configure. Fixes: 754a76591b12 ("drm/i915/fbdev: Stop repeating tile configuration on stagnation") Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190215123019.32283-1-chris@chris-wilson.co.uk Cc: <stable@vger.kernel.org> # v3.19+ (cherry picked from commit d9b308b1f8a1acc0c3279f443d4fe0f9f663252e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-02-19drm/amd/display: Raise dispclk value for dce11Roman Li1-3/+8
[Why] The visual corruption due to low display clock value. Observed on Carrizo 4K@60Hz. [How] There was earlier patch for dce_update_clocks: Adding +15% workaround also to to dce11_update_clocks Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-19drm/amd/display: Fix MST reboot/poweroff sequenceLeo (Hanghong) Ma1-2/+3
[Why] drm_dp_mst_topology_mgr_suspend() is added into the new reboot sequence, which disables the UP request at the beginning. Therefore sideband messages are blocked. [How] Finish MST sideband message transaction before UP request is suppressed. Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-02-19drm/amdgpu: Update sdma golden setting for vega20shaoyunl1-2/+2
According to hardware engineer, WRITE_BURST_LENGTH [9:8] in register SDMA0_CHICKEN_BITS need to change to 3 for better performance Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-19drm/amdgpu: Set DPM_FLAG_NEVER_SKIP when enabling PM-runtimeAlex Deucher1-0/+1
Based on a similar patch from Rafael for radeon. When using ATPX to control dGPU power, the state is not retained across suspend and resume cycles by default. This can probably be loosened for Hybrid Graphics (_PR3) laptops where I think the state is properly retained. Fixes: c62ec4610c40 ("PM / core: Fix direct_complete handling for devices with no callbacks") Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-02-19gpu: drm: radeon: Set DPM_FLAG_NEVER_SKIP when enabling PM-runtimeRafael J. Wysocki1-0/+1
On HP ProBook 4540s, if PM-runtime is enabled in the radeon driver and the direct-complete optimization is used for the radeon device during system-wide suspend, the system doesn't resume. Preventing direct-complete from being used with the radeon device by setting the DPM_FLAG_NEVER_SKIP driver flag for it makes the problem go away, which indicates that direct-complete is not safe for the radeon driver in general and should not be used with it (at least for now). This fixes a regression introduced by commit c62ec4610c40 ("PM / core: Fix direct_complete handling for devices with no callbacks") which allowed direct-complete to be applied to devices without PM callbacks (again) which in turn unlocked direct-complete for radeon on HP ProBook 4540s. Fixes: c62ec4610c40 ("PM / core: Fix direct_complete handling for devices with no callbacks") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201519 Reported-by: Ярослав Семченко <ukrkyi@gmail.com> Tested-by: Ярослав Семченко <ukrkyi@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-02-15drm: Use array_size() when creating leaseMatthew Wilcox1-1/+2
Passing an object_count of sufficient size will make object_count * 4 wrap around to be very small, then a later function will happily iterate off the end of the object_ids array. Using array_size() will saturate at SIZE_MAX, the kmalloc() will fail and we'll return an -ENOMEM to the norty userspace. Fixes: 62884cd386b8 ("drm: Add four ioctls for managing drm mode object leases [v7]") Signed-off-by: Matthew Wilcox <willy@infradead.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> # v4.15+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-02-15Merge branch 'drm-fixes-5.0' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie4-20/+46
into drm-fixes amdgpu: - Vega20 psp fix - Add vrr range to debugfs for freesync debugging sched: - Scheduler race fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190213202958.3336-1-alexander.deucher@amd.com
2019-02-15Merge tag 'drm-intel-fixes-2019-02-13' of ↵Dave Airlie10-178/+208
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.0-rc7: - combo phy programming fix - opregion version check fix for VBT RVDA lookup - gem mmap ioctl race fix - fbdev hpd during suspend fix - array size bounds check fix in pmu Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/877ee3504b.fsf@intel.com
2019-02-15Merge tag 'drm-misc-fixes-2019-02-13' of ↵Dave Airlie7-35/+9
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.0: - Fix license inconsistency in vkms. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/812e2f53-d72a-8fba-6c8c-fde8f44cf141@linux.intel.com
2019-02-13drm/amdgpu/psp11: TA firmware is optional (v3)Alex Deucher2-14/+23
Don't warn or fail if it's missing. v2: handle xgmi case more gracefully. v3: handle older kernels properly Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Tested-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-13Merge tag 'imx-drm-fixes-2019-02-12' of git://git.pengutronix.de/pza/linux ↵Dave Airlie4-14/+29
into drm-fixes drm/imx: plane, ldb, and ipu-v3 fixes - Fix CSI register offsets for i.MX51 and i.MX53. - Fix delayed page flip completion events on i.MX6QP due to unexpected behaviour of the PRE when issuing NOP buffer updates to the same buffer address. - Stop throwing errors for plane updates on disabled CRTCs when a userspace process is killed while a plane update is pending. - Add missing of_node_put cleanup in imx_ldb_bind. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/1549990602.4800.11.camel@pengutronix.de
2019-02-12drm/i915/opregion: rvda is relative from opregion base in opregion 2.1+Jani Nikula1-3/+21
Starting from opregion version 2.1 (roughly corresponding to ICL+) the RVDA field is relative from the beginning of opregion, not absolute address. Fix the error path while at it. v2: Make relative vs. absolute conditional on the opregion version, bumped for the purpose. Turned out there are machines relying on absolute RVDA in the wild. v3: Fix the version checks Fixes: 04ebaadb9f2d ("drm/i915/opregion: handle VBT sizes bigger than 6 KB") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190208184254.24123-2-jani.nikula@intel.com (cherry picked from commit a0f52c3d357af218a9c1f7cd906ab70426176a1a) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-02-12drm/i915/opregion: fix version checkJani Nikula1-2/+12
The u32 version field encodes major, minor, revision and reserved. We've basically been checking for any non-zero version. Add opregion version logging while at it. v2: Fix the fix of the version check Fixes: 04ebaadb9f2d ("drm/i915/opregion: handle VBT sizes bigger than 6 KB") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190208184254.24123-1-jani.nikula@intel.com (cherry picked from commit 98fdaaca9537b997062f1abc0aa87c61b50ce40a) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-02-12drm/i915: Prevent a race during I915_GEM_MMAP ioctl with WC setJoonas Lahtinen1-1/+11
Make sure the underlying VMA in the process address space is the same as it was during vm_mmap to avoid applying WC to wrong VMA. A more long-term solution would be to have vm_mmap_locked variant in linux/mmap.h for when caller wants to hold mmap_sem for an extended duration. v2: - Refactor the compare function Fixes: 1816f9236303 ("drm/i915: Support creation of unbound wc user mappings for objects") Reported-by: Adam Zabrocki <adamza@microsoft.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.0+ Cc: Akash Goel <akash.goel@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Adam Zabrocki <adamza@microsoft.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20190207085454.10598-1-joonas.lahtinen@linux.intel.com (cherry picked from commit 5c4604e757ba9b193b09768d75a7d2105a5b883f) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-02-12drm/i915: Block fbdev HPD processing during suspendLyude Paul2-1/+42
When resuming, we check whether or not any previously connected MST topologies are still present and if so, attempt to resume them. If this fails, we disable said MST topologies and fire off a hotplug event so that userspace knows to reprobe. However, sending a hotplug event involves calling drm_fb_helper_hotplug_event(), which in turn results in fbcon doing a connector reprobe in the caller's thread - something we can't do at the point in which i915 calls drm_dp_mst_topology_mgr_resume() since hotplugging hasn't been fully initialized yet. This currently causes some rather subtle but fatal issues. For example, on my T480s the laptop dock connected to it usually disappears during a suspend cycle, and comes back up a short while after the system has been resumed. This guarantees pretty much every suspend and resume cycle, drm_dp_mst_topology_mgr_set_mst(mgr, false); will be caused and in turn, a connector hotplug will occur. Now it's Rute Goldberg time: when the connector hotplug occurs, i915 reprobes /all/ of the connectors, including eDP. However, eDP probing requires that we power on the panel VDD which in turn, grabs a wakeref to the appropriate power domain on the GPU (on my T480s, this is the PORT_DDI_A_IO domain). This is where things start breaking, since this all happens before intel_power_domains_enable() is called we end up leaking the wakeref that was acquired and never releasing it later. Come next suspend/resume cycle, this causes us to fail to shut down the GPU properly, which causes it not to resume properly and die a horrible complicated death. (as a note: this only happens when there's both an eDP panel and MST topology connected which is removed mid-suspend. One or the other seems to always be OK). We could try to fix the VDD wakeref leak, but this doesn't seem like it's worth it at all since we aren't able to handle hotplug detection while resuming anyway. So, let's go with a more robust solution inspired by nouveau: block fbdev from handling hotplug events until we resume fbdev. This allows us to still send sysfs hotplug events to be handled later by user space while we're resuming, while also preventing us from actually processing any hotplug events we receive until it's safe. This fixes the wakeref leak observed on the T480s and as such, also fixes suspend/resume with MST topologies connected on this machine. Changes since v2: * Don't call drm_fb_helper_hotplug_event() under lock, do it after lock (Chris Wilson) * Don't call drm_fb_helper_hotplug_event() in intel_fbdev_output_poll_changed() under lock (Chris Wilson) * Always set ifbdev->hpd_waiting (Chris Wilson) Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 0e32b39ceed6 ("drm/i915: add DP 1.2 MST support (v0.7)") Cc: Todd Previte <tprevite@gmail.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v3.17+ Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190129191001.442-2-lyude@redhat.com (cherry picked from commit fe5ec65668cdaa4348631d8ce1766eed43b33c10) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-02-12drm/i915/pmu: Fix enable count array size and bounds checkingTvrtko Ursulin3-11/+22
Enable count array is supposed to have one counter for each possible engine sampler. As such, array sizing and bounds checking is not correct and would blow up the asserts if more samplers were added. No ill-effect in the current code base but lets fix it for correctness. At the same time tidy the assert for readability and robustness. v2: * One check per assert. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: b46a33e271ed ("drm/i915/pmu: Expose a PMU interface for perf queries") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190205130353.21105-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 26a11deea685b41a43edb513194718aa1f461c9a) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-02-11drm/i915/cnl: Fix CNL macros for Voltage Swing programmingAditya Swarup1-7/+7
CNL macros for register groups CNL_PORT_TX_DW2_* / CNL_PORT_TX_DW5_* are configured incorrectly wrt definition of _CNL_PORT_TX_DW_GRP. v2: Jani suggested to keep the macros organized semantically i.e., by function, secondarily by port/pipe/transcoder.->(dw, port) Fixes: 4e53840fdfdd ("drm/i915/icl: Introduce new macros to get combophy registers") Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190110230844.9213-1-aditya.swarup@intel.com (cherry picked from commit b14c06ec024947eaa35212f2380e90233d5092e0) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-02-11drm/i915/icl: combo port vswing programming changes per BSPECClint Taylor3-153/+93
In August 2018 the BSPEC changed the ICL port programming sequence to closely resemble earlier gen programming sequence. Restrict combo phy to HBR max rate unless eDP panel is connected to port. v2: remove debug code that Imre found v3: simplify translation table if-else v4: edp translation table now based on link rate and low_swing v5: Misc review comments + r-b BSpec: 21257 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1545084827-5776-1-git-send-email-clinton.a.taylor@intel.com (cherry picked from commit b265a2a6255f581258ccfdccbd2efca51a142fe2) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-02-10drm/vkms: Fix license inconsistentRodrigo Siqueira7-35/+9
Fixes license inconsistent related to the VKMS driver and remove the redundant boilerplate comment. Fixes: 854502fa0a38 ("drm/vkms: Add basic CRTC initialization") Cc: stable@vger.kernel.org Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190206140116.7qvy2lpwbcd7wds6@smtp.gmail.com
2019-02-08drm/amd/display: Expose connector VRR range via debugfsNicholas Kazlauskas1-1/+21
[Why] It's useful to know the min and max vrr range for IGT testing. [How] Expose the min and max vfreq for the connector via a debugfs file on the connector, "vrr_range". Example usage: cat /sys/kernel/debug/dri/0/DP-1/vrr_range Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-08drm/sched: Always trace the dependencies we wait on, to fix a race.Eric Anholt1-5/+2
The entity->dependency can go away completely once we've called drm_sched_entity_add_dependency_cb() (if the cb is called before we get around to tracing). The tracepoint is more useful if we trace every dependency instead of just ones that get callbacks installed, anyway, so just do that. Fixes any easy-to-produce OOPS when tracing the scheduler on V3D with "perf record -a -e gpu_scheduler:.\* glxgears" and DEBUG_SLAB enabled. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-08Merge tag 'drm-misc-fixes-2019-02-07' of ↵Dave Airlie5-29/+24
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.0-rc6: - Fixes to omap/dsi encoder. - Clock fix for sun4i. - Licensing header fix for rockchip. - Fix division by zero in the mode when trying to set a mode on i915 with GVT-g enabled. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/84462cef-609f-e2af-084a-f9fe2b05c53e@linux.intel.com
2019-02-08Merge tag 'drm-intel-fixes-2019-02-07-1' of ↵Dave Airlie3-8/+46
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.0-rc6: - SNB DPLL sanitize - ICL DDI clock selection - SLK srckey mask Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87lg2s6nur.fsf@intel.com
2019-02-07Merge branch 'vmwgfx-fixes-5.0-2' of ↵Dave Airlie3-53/+36
git://people.freedesktop.org/~thomash/linux into drm-fixes A patch set from Christoph for vmwgfx dma mode detection breakage with the new dma code restructuring in 5.0 A couple of fixes also CC'd stable Finally an improved IOMMU detection that automatically enables dma mapping also with other vIOMMUS than the intel one if present and enabled. Currently trying to start a VM in that case would fail catastrophically. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190206194735.4663-1-thellstrom@vmware.com
2019-02-06drm/omap: dsi: Hack-fix DSI bus flagsTomi Valkeinen1-0/+11
Since commit b4935e3a3cfa ("drm/omap: Store bus flags in the omap_dss_device structure") video mode flags are managed by the omapdss (and later omapdrm) core based on bus flags stored in omap_dss_device. This works fine for all devices whose video modes are set by the omapdss and omapdrm core, but breaks DSI operation as the DSI still uses legacy code paths and sets the DISPC timings manually. To fix the problem properly we should move the DSI encoder to the new encoder model. This will however require a considerable amount of work. Restore DSI operation by adding back video mode flags handling in the DSI encoder driver as a hack in the meantime. Fixes: b4935e3a3cfa ("drm/omap: Store bus flags in the omap_dss_device structure") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-5-laurent.pinchart@ideasonboard.com
2019-02-06drm/omap: dsi: Fix OF platform depopulateTomi Valkeinen1-2/+2
Commit edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe") moved the of_platform_populate() call from dsi_bind() to dsi_probe(), but failed to move the corresponding of_platform_depopulate() from dsi_unbind() to dsi_remove(). This results in OF child devices being potentially removed multiple times. Fix it by placing the of_platform_depopulate() call where it belongs. Fixes: edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-4-laurent.pinchart@ideasonboard.com
2019-02-06drm/omap: dsi: Fix crash in DSI debug dumpsTomi Valkeinen1-6/+6
Reading any of the DSI debugfs files results in a crash, as wrong pointer is passed to the dump functions, and the dump functions use a wrong pointer. This patch fixes DSI debug dumps. Fixes: f3ed97f9ae7d ("drm/omap: dsi: Simplify debugfs implementation") Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-3-laurent.pinchart@ideasonboard.com
2019-02-06drm/i915: Try to sanitize bogus DPLL state left over by broken SNB BIOSenVille Syrjälä1-6/+44
Certain SNB machines (eg. ASUS K53SV) seem to have a broken BIOS which misprograms the hardware badly when encountering a suitably high resolution display. The programmed pipe timings are somewhat bonkers and the DPLL is totally misprogrammed (P divider == 0). That will result in atomic commit timeouts as apparently the pipe is sufficiently stuck to not signal vblank interrupts. IIRC something like this was also observed on some other SNB machine years ago (might have been a Dell XPS 8300) but a BIOS update cured it. Sadly looks like this was never fixed for the ASUS K53SV as the latest BIOS (K53SV.320 11/11/2011) is still broken. The quickest way to deal with this seems to be to shut down the pipe+ports+DPLL. Unfortunately doing this during the normal sanitization phase isn't quite soon enough as we already spew several WARNs about the bogus hardware state. But it's better than hanging the boot for a few dozen seconds. Since this is limited to a few old machines it doesn't seem entirely worthwile to try and rework the readout+sanitization code to handle it more gracefully. v2: Fix potential NULL deref (kbuild test robot) Constify has_bogus_dpll_config() Cc: stable@vger.kernel.org # v4.20+ Cc: Daniel Kamil Kozar <dkk089@gmail.com> Reported-by: Daniel Kamil Kozar <dkk089@gmail.com> Tested-by: Daniel Kamil Kozar <dkk089@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109245 Fixes: 516a49cc1946 ("drm/i915: Fix assert_plane() warning on bootup with external display") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111174950.10681-1-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com> (cherry picked from commit 7bed8adcd9f86231bb69bbc02f88ad89330f99e3) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190205141846.6053-1-ville.syrjala@linux.intel.com
2019-02-05drm/amd/display: Attach VRR properties for eDP connectorsNicholas Kazlauskas1-1/+2
[Why] eDP was missing in the checks for supported VRR connectors. [How] Attach the properties for eDP connectors too. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202449 Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-05drm/amdkfd: Fix if preprocessor statement above kfd_fill_iolink_info_for_cpuNathan Chancellor1-1/+1
Clang warns: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_crat.c:866:5: warning: 'CONFIG_X86_64' is not defined, evaluates to 0 [-Wundef] ^ 1 warning generated. Fixes: d1c234e2cd10 ("drm/amdkfd: Allow building KFD on ARM64 (v2)") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-05drm/amdgpu: use spin_lock_irqsave to protect vm_manager.pasid_idrPhilip Yang1-2/+3
amdgpu_vm_get_task_info is called from interrupt handler and sched timeout workqueue, we should use irq version spin_lock to avoid deadlock. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-05drm/i915: always return something on DDI clock selectionLucas De Marchi1-1/+1
Even if we don't have the correct clock and get a warning, we should not skip the return. v2: improve commit message (from Joonas) Fixes: 1fa11ee2d9d0 ("drm/i915/icl: start adding the TBT pll") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190125222444.19926-3-lucas.demarchi@intel.com (cherry picked from commit 7a61a6dec3dfb9f2e8c39a337580a3c3036c5cdf) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-02-05drm/i915: Fix skl srckey mask bitsVille Syrjälä1-1/+1
We're incorrectly masking off the R/V channel enable bit from KEYMSK. Fix it up. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: b20815255693 ("drm/i915: Add plane alpha blending support, v2.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190125183846.28755-1-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper <matthew.d.roper@intel.com> (cherry picked from commit 968bf969b47df2481022b9a05eaab02948eec088) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-02-05drm/vmwgfx: Improve on IOMMU detectionThomas Hellstrom1-2/+17
instead of relying on intel_iommu_enabled, use the fact that the dma_map_ops::map_page != dma_direct_map_page. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
2019-02-05drm/vmwgfx: Fix setting of dma masksThomas Hellstrom1-3/+6
Previously we set only the dma mask and not the coherent mask. Fix that. Also, for clarity, make sure both are initially set to 64 bits. Cc: <stable@vger.kernel.org> Fixes: 0d00c488f3de: ("drm/vmwgfx: Fix the driver for large dma addresses") Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
2019-02-05drm/vmwgfx: Also check for crtc status while checking for DU activeDeepak Rawat1-1/+1
During modeset check it is possible to have all crtc_state's in atomic state. Check for crtc enable status while checking for display unit active status. Only error if enabling a crtc while display unit is not active. Cc: <stable@vger.kernel.org> Fixes: 9da6e26c0aae: ("drm/vmwgfx: Fix a layout race condition") Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2019-02-05drm/vmwgfx: Fix an uninitialized fence handle valueThomas Hellstrom1-2/+2
if vmw_execbuf_fence_commands() fails, The handle value will be uninitialized and a bogus fence handle might be copied to user-space. Cc: <stable@vger.kernel.org> Fixes: 2724b2d54cda: ("drm/vmwgfx: Use new validation interface for the modesetting code v2") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> #v1 Reviewed-by: Sinclair Yeh <syeh@vmware.com> #v1 Reviewed-by: Deepak Rawat <drawat@vmware.com>
2019-02-05drm/vmwgfx: Return error code from vmw_execbuf_copy_fence_userThomas Hellstrom1-1/+1
The function was unconditionally returning 0, and a caller would have to rely on the returned fence pointer being NULL to detect errors. However, the function vmw_execbuf_copy_fence_user() would expect a non-zero error code in that case and would BUG otherwise. So make sure we return a proper non-zero error code if the fence pointer returned is NULL. Cc: <stable@vger.kernel.org> Fixes: ae2a104058e2: ("vmwgfx: Implement fence objects") Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
2019-02-01drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at initPaul Kocialkowski1-0/+2
When initializing clocks, a reference to the TCON channel 0 clock is obtained. However, the clock is never prepared and enabled later. Switching from simplefb to DRM actually disables the clock (that was usually configured by U-Boot) because of that. On the V3s, this results in a hang when writing to some mixer registers when switching over to DRM from simplefb. Fix this by preparing and enabling the clock when initializing other clocks. Waiting for sun4i_tcon_channel_enable to enable the clock is apparently too late and results in the same mixer register access hang. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190131132550.26355-1-paul.kocialkowski@bootlin.com
2019-02-01drm/amdgpu: fix the incorrect external id for raven seriesHuang Rui1-2/+4
This patch fixes the incorrect external id that kernel reports to user mode driver. Raven2's rev_id is starts from 0x8, so its external id (0x81) should start from rev_id + 0x79 (0x81 - 0x8). And Raven's rev_id should be 0x21 while rev_id == 1. Reported-by: Crystal Jin <Crystal.Jin@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 19:30:35 +0000