summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2019-12-10drm/meson: add RDMA register bits definesNeil Armstrong1-0/+48
The Amlogic VPU embeds a "Register DMA" that can write a sequence of registers on the VPU AHB bus, either manually or triggered by an internal IRQ event like VSYNC or a line input counter. This adds the register defines. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-3-narmstrong@baylibre.com
2019-12-10drm/meson: add AFBC decoder registers for GXM and G12ANeil Armstrong2-0/+77
Add the registers used to program the ARM Framebuffer Compression decoders used in the Amlogic GXM and G12A SoCs families. This also adds the routing and pipeline configuration bits and registers needed to enable AFBC support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-2-narmstrong@baylibre.com
2019-12-09drm/panel: tpo-tpg110: use drm_panel backlight supportSam Ravnborg1-14/+6
Use the backlight support in drm_panel to simplify the driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-26-sam@ravnborg.org
2019-12-09drm/panel: tpo-td028ttec1: use drm_panel backlight supportSam Ravnborg1-10/+4
Use the backlight support in drm_panel to simplify the driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-25-sam@ravnborg.org
2019-12-09drm/panel: sitronix-st7789v: use drm_panel backlight supportSam Ravnborg1-33/+4
Use the backlight support in drm_panel to simplify the driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-24-sam@ravnborg.org
2019-12-09drm/panel: sitronix-st7701: use drm_panel backlight supportSam Ravnborg1-8/+4
Use the backlight support in drm_panel to simplify the driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-23-sam@ravnborg.org
2019-12-09drm/panel: sharp-ls043t1le01: use drm_panel backlight supportSam Ravnborg1-13/+7
Use the backlight support in drm_panel to simplify the driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-22-sam@ravnborg.org
2019-12-09drm/panel: sharp-lq101r1sx01: use drm_panel backlight supportSam Ravnborg1-14/+7
Use the backlight support in drm_panel to simplify the driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-21-sam@ravnborg.org
2019-12-09drm/panel: seiko-43wvf1g: use drm_panel backlight supportSam Ravnborg1-30/+6
Use the backlight support in drm_panel to simplify the driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-20-sam@ravnborg.org
2019-12-09drm/panel: ronbo-rb070d30: use drm_panel backlight supportSam Ravnborg1-16/+3
Use the backlight support in drm_panel to simplify the driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-19-sam@ravnborg.org
2019-12-09drm/panel: rocktech-jh057n00900: use drm_panel backlight supportSam Ravnborg1-12/+12
Use the backlight support in drm_panel to simplify the driver. While touching the include files sort them and divide them up in blocks. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-18-sam@ravnborg.org
2019-12-09drm/panel: raydium-rm68200: use drm_panel backlight supportSam Ravnborg1-10/+5
Use the backlight support in drm_panel to simplify the driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-17-sam@ravnborg.org
2019-12-09drm/panel: panasonic-vvx10f034n00: use drm_panel backlight supportSam Ravnborg1-39/+6
Use the backlight support in drm_panel to simplify the driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-16-sam@ravnborg.org
2019-12-09drm/panel: osd-osd101t2587-53ts: use drm_panel backlight supportSam Ravnborg1-15/+9
Use the backlight support in drm_panel to simplify the driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-15-sam@ravnborg.org
2019-12-09drm/panel: olimex-lcd-olinuxino: use drm_panel backlight supportSam Ravnborg1-12/+6
Use the backlight support in drm_panel to simplify the driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-14-sam@ravnborg.org
2019-12-09drm/panel: lvds: use drm_panel backlight supportSam Ravnborg1-35/+5
Use the backlight support in drm_panel to simplify the driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-13-sam@ravnborg.org
2019-12-09drm/panel: kingdisplay-kd097d04: use drm_panel backlight supportSam Ravnborg1-20/+8
Use the backlight support in drm_panel to simplify the driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-12-sam@ravnborg.org
2019-12-09drm/panel: innolux-p079zca: use drm_panel backlight supportSam Ravnborg1-20/+8
Use the backlight support in drm_panel to simplify the driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-11-sam@ravnborg.org
2019-12-09drm/panel: ilitek-ili9881c: use drm_panel backlight supportSam Ravnborg1-16/+3
Use the backlight support in drm_panel to simplify the driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-10-sam@ravnborg.org
2019-12-09drm/panel: feiyang-fy07024di26a30d: use drm_panel backlight supportSam Ravnborg1-7/+3
Use the backlight support in drm_panel to simplify the driver Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-9-sam@ravnborg.org
2019-12-09drm/panel: drop drm_device from drm_panelSam Ravnborg37-78/+68
The panel drivers used drm_panel.drm for two purposes: 1) Argument to drm_mode_duplicate() 2) drm->dev was used in error messages The first usage is replaced with drm_connector.dev - drm_connector is already connected to a drm_device and we have a valid connector The second usage is replaced with drm_panel.dev - this makes drivers more consistent in their dev argument used for dev_err() and friends With these replacements there are no more uses of drm_panel.drm, so it is removed from struct drm_panel. With this change drm_panel_attach() and drm_panel_detach() no longer have any use as they are empty functions. v2: - editorial correction in changelog (Laurent) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-8-sam@ravnborg.org
2019-12-09drm/panel: decouple connector from drm_panelSam Ravnborg25-29/+30
To facilitate moving connector creation to display drivers, decouple the drm_connector from drm_panel. This patch adds a connector argument to drm_panel_get_modes(). All users of drm_panel_get_modes() already had the connector available, so updating users was trivial. With this patch drm_panel no longer keeps a reference to the drm_connector. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@nxp.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: CK Hu <ck.hu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Torsten Duwe <duwe@lst.de> Cc: Vasily Khoruzhick <anarsoul@gmail.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Sean Paul <seanpaul@chromium.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Hariprasad Kelam <hariprasad.kelam@gmail.com> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Brian Masney <masneyb@onstation.org> Cc: Rob Clark <robdclark@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Allison Randal <allison@lohutok.net> Cc: Shayenne Moura <shayenneluzmoura@gmail.com> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-7-sam@ravnborg.org
2019-12-09drm/panel: add drm_connector argument to get_modes()Sam Ravnborg40-128/+140
Today the bridge creates the drm_connector, but that is planned to be moved to the display drivers. To facilitate this, update drm_panel_funcs.get_modes() to take drm_connector as an argument. All panel drivers implementing get_modes() are updated. v2: - drop accidental change (Laurent) - update docs for get_modes (Laurent) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-6-sam@ravnborg.org
2019-12-09drm: get drm_bridge_panel connector via helperSam Ravnborg3-2/+19
The drm_connector created by drm_panel_bridge was accessed via drm_panel.connector. Avoid the detour around drm_panel by providing a simple get method. This avoids direct access to the connector field in drm_panel in the two users. The change is done in preparation for removal of drm_panel.connector. Update pl111 and tve200 to use the new helper. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Eric Anholt <eric@anholt.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-5-sam@ravnborg.org
2019-12-09drm/panel: simple: use drm_panel backlight supportSam Ravnborg1-39/+11
Use drm_panel infrastructure for backlight. Replace direct calls with drm_panel_*() calls to utilize the drm_panel support. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-4-sam@ravnborg.org
2019-12-09drm/panel: add backlight supportSam Ravnborg1-2/+60
Panels often support backlight as specified in a device tree. Update the drm_panel infrastructure to support this to simplify the drivers. With this the panel driver just needs to add the following to the probe() function: err = drm_panel_of_backlight(panel); if (err) return err; Then drm_panel will handle all the rest. There is one caveat with the backlight support. If drm_panel_(enable|disable) are called multiple times in a row then backlight_(enable|disable) will be called multiple times. The above will happen when a panel drivers unconditionally calls drm_panel_disable() in their shutdown() function, whan the panel is already disabled and then shutdown() is called. Reading the backlight code it seems safe to call the backlight_(enable|disable) several times. v3: - Improve comments, fix grammar (Laurent) - Do not fail in drm_panel_of_backlight() if no DT support (Laurent) - Log if backlight_(enable|disable) fails (Laurent) - Improve drm_panel_of_backlight() docs - Updated changelog with backlight analysis (triggered by Laurent) v2: - Drop test of CONFIG_DRM_PANEL in header-file (Laurent) - do not enable backlight if ->enable() returns an error Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-3-sam@ravnborg.org
2019-12-09drm/drm_panel: no error when no callbackSam Ravnborg1-10/+25
The callbacks in drm_panel_funcs are optional, so do not return an error just because no callback is assigned. v2: - Document what functions in drm_panel_funcs are optional (Laurent) - Return -EOPNOTSUPP if get_modes() is not assigned (Laurent) (Sam: -EOPNOTSUPP seems to best error code in this situation) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-2-sam@ravnborg.org
2019-12-09drm/gma500: add a missed gma_power_end in error pathChuhong Yuan1-0/+1
oaktrail_lvds_mode_set() misses a gma_power_end() in an error path. Add the call to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191209085747.16057-1-hslester96@gmail.com
2019-12-09drm/bridge: Clarify the atomic enable/disable hooks semanticsBoris Brezillon1-12/+12
The [pre_]enable/[post_]disable hooks are passed the old atomic state. Update the doc and rename the arguments to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-8-boris.brezillon@collabora.com
2019-12-09drm/bridge: Make the bridge chain a double-linked listBoris Brezillon4-73/+129
So that each element in the chain can easily access its predecessor. This will be needed to support bus format negotiation between elements of the bridge chain. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-5-boris.brezillon@collabora.com
2019-12-09drm: Stop accessing encoder->bridge directlyBoris Brezillon5-16/+37
We are about to replace the single-linked bridge list by a double-linked one based on list.h, leading to the suppression of the encoder->bridge field. But before we can do that we must provide a drm_bridge_chain_get_first_bridge() bridge helper and patch all drivers and core helpers to use it instead of directly accessing encoder->bridge. Note that we still have 2 drivers (VC4 and Exynos) manipulating the encoder->bridge field directly because they need to cut the bridge chain in order to control the enable/disable sequence. This is definitely not something we want to encourage, so let's keep those 2 oddities around until we find a better solution. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-4-boris.brezillon@collabora.com
2019-12-09drm/bridge: Introduce drm_bridge_get_next_bridge()Boris Brezillon4-6/+9
And use it in drivers accessing the bridge->next field directly. This is part of our attempt to make the bridge chain a double-linked list based on the generic list helpers. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-3-boris.brezillon@collabora.com
2019-12-09drm/bridge: Rename bridge helpers targeting a bridge chainBoris Brezillon6-80/+86
Change the prefix of bridge helpers targeting a bridge chain from drm_bridge_ to drm_bridge_chain_ to better reflect the fact that the operation will happen on all elements of chain, starting at the bridge passed in argument. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-2-boris.brezillon@collabora.com
2019-12-06drm/dp_mst: Remove VCPI while disabling topology mgrWayne Lin1-0/+13
[Why] This patch is trying to address the issue observed when hotplug DP daisy chain monitors. e.g. src-mstb-mstb-sst -> src (unplug) mstb-mstb-sst -> src-mstb-mstb-sst (plug in again) Once unplug a DP MST capable device, driver will call drm_dp_mst_topology_mgr_set_mst() to disable MST. In this function, it cleans data of topology manager while disabling mst_state. However, it doesn't clean up the proposed_vcpis of topology manager. If proposed_vcpi is not reset, once plug in MST daisy chain monitors later, code will fail at checking port validation while trying to allocate payloads. When MST capable device is plugged in again and try to allocate payloads by calling drm_dp_update_payload_part1(), this function will iterate over all proposed virtual channels to see if any proposed VCPI's num_slots is greater than 0. If any proposed VCPI's num_slots is greater than 0 and the port which the specific virtual channel directed to is not in the topology, code then fails at the port validation. Since there are stale VCPI allocations from the previous topology enablement in proposed_vcpi[], code will fail at port validation and reurn EINVAL. [How] Clean up the data of stale proposed_vcpi[] and reset mgr->proposed_vcpis to NULL while disabling mst in drm_dp_mst_topology_mgr_set_mst(). Changes since v1: *Add on more details in commit message to describe the issue which the patch is trying to fix Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> [added cc to stable] Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191205090043.7580-1-Wayne.Lin@amd.com Cc: <stable@vger.kernel.org> # v3.17+
2019-12-06drm/panfrost: Register devfreq cooling deviceRobin Murphy1-11/+21
When we have devfreq, also try to register a basic cooling device in case GPU workloads manage to hit thermal throttling thresholds. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/21f228099321f460d62e0ab7c77b2d2213dd4da8.1574974319.git.robin.murphy@arm.com
2019-12-06drm/udl: Remove field lost_pixels from struct udl_deviceThomas Zimmermann4-10/+8
The field lost_pixels in struct udl_device was supposed to signal an error during USB transfers of the framebuffer data. The driver would have to schedule a re-transfer at a later point. This code was never implemented. Remove lost_pixels and return regular error codes instead. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191206085954.9697-8-tzimmermann@suse.de
2019-12-06drm/udl: Begin/end access to imported buffers in damage-handlerThomas Zimmermann1-20/+23
The damage-handler code now invokes dma_buf_{begin,end}_access() for imported buffers. These calls were missing from the page-flip and modesetting code paths. The patch also fixes an bug in the original where an error code was overwritten by the result of dma_buf_end_cpu_access(). v2: * only return an error code from dma_buf_end_cpu_access() if no other error code has been set before Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191206085954.9697-7-tzimmermann@suse.de
2019-12-06drm/udl: Move log-cpp code out of udl_damage_handler()Thomas Zimmermann1-5/+12
Computing the cpp value's logarithm in a separate helper function makes the damage-handler code more readable. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191206085954.9697-6-tzimmermann@suse.de
2019-12-06drm/udl: Move clip-rectangle code out of udl_handle_damage()Thomas Zimmermann1-16/+32
Computing the clip rectable in a separate helper function makes the damage-handler code more readable. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191206085954.9697-5-tzimmermann@suse.de
2019-12-06drm/udl: Vmap framebuffer after all tests succeeded in damage handlingThomas Zimmermann2-13/+7
We now do the fast tests before the potentially expensive vmap operation. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191206085954.9697-4-tzimmermann@suse.de
2019-12-06drm/udl: Don't track number of identical and sent pixels per lineThomas Zimmermann3-10/+3
A call to udl_render_hline() returns the number of identical and sent pixels. None of these values is used. Remove the parameters. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191206085954.9697-3-tzimmermann@suse.de
2019-12-06drm/udl: Remove unused statistics countersThomas Zimmermann2-17/+1
None of the udl driver's statistics counters is used anywhere. Remove them. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191206085954.9697-2-tzimmermann@suse.de
2019-12-06drm: share address space for dma bufsGerd Hoffmann2-4/+4
Use the shared address space of the drm device (see drm_open() in drm_file.c) for dma-bufs too. That removes a difference betweem drm device mmap vmas and dma-buf mmap vmas and fixes corner cases like dropping ptes (using madvise(DONTNEED) for example) not working properly. Also remove amdgpu driver's private dmabuf update. It is not needed any more now that we are doing this for everybody. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: http://patchwork.freedesktop.org/patch/msgid/20191127092523.5620-3-kraxel@redhat.com
2019-12-06drm: call drm_gem_object_funcs.mmap with fake offsetGerd Hoffmann4-12/+6
The fake offset is going to stay, so change the calling convention for drm_gem_object_funcs.mmap to include the fake offset. Update all users accordingly. Note that this reverts 83b8a6f242ea ("drm/gem: Fix mmap fake offset handling for drm_gem_object_funcs.mmap") and on top then adds the fake offset to drm_gem_prime_mmap to make sure all paths leading to obj->funcs->mmap are consistent. v3: move fake-offset tweak in drm_gem_prime_mmap() so we have this code only once in the function (Rob Herring). Fixes: 83b8a6f242ea ("drm/gem: Fix mmap fake offset handling for drm_gem_object_funcs.mmap") Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20191127092523.5620-2-kraxel@redhat.com
2019-12-05drm/vkms: Fix typo and preposion in function documentationGabriela Bittencourt1-4/+4
Fix typo in word 'blend' and in the word 'destination' and change preposition 'at' to 'of' in function 'blend' documentation. And change the task introduction word 'Todo' for the word all in uppercase - 'TODO'. With the TODO word all in uppercase (as it's the standard) it's easier to find the tasks that have to be done throughout the code. Changes since V3: Rodrigo: - Merge the patch series into a single patch since it contains one single logical change Changes since V2: - Add fix typo in word 'destination' - Add change of the preposition - Fix the name of the function in log message - Add the change in word 'Todo' Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Signed-off-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191104161424.18105-1-gabrielabittencourt00@gmail.com
2019-12-05drm/dp_mst: Clear all payload id tables downstream when initializingSean Paul1-3/+60
It seems that on certain MST hubs, namely the CableMatters USB-C 2x DP hub, using the DP_PAYLOAD_ALLOCATE_SET and DP_PAYLOAD_TABLE_UPDATE_STATUS register ranges to clear any pre-existing payload allocations on the hub isn't always enough to reset things if the source device has been reset unexpectedly. Or at least, that's the current running theory. The precise behavior appears to be that when the source device gets reset unexpectedly, the hub begins reporting an available_pbn value of 0 for all of its ports. This is a bit inconsistent with the our theory, since this seems to happen even if previously set PBN allocations should have resulted in a non-zero available_pbn value. So, it's possible that something else may be going on here. Strangely though, sending a CLEAR_PAYLOAD_ID_TABLE broadcast request when initializing the MST topology seems to bring things into working order and make available_pbn work again. Since this is a pretty safe solution, let's go ahead and implement it. Changes since v1: * Change indenting on drm_dp_send_clear_payload_id_table() prototype * Remove some braces in drm_dp_send_clear_payload_id_table() * Reorganize some variable declarations in drm_dp_send_clear_payload_id_table() * Don't forget to handle DP_CLEAR_PAYLOAD_ID_TABLE in drm_dp_sideband_parse_reply() * Move drm_dp_send_clear_payload_id_table() call into drm_dp_mst_link_probe_work(), since we can't send sideband messages while under lock in drm_dp_mst_topology_mgr_set_mst() * Change commit message Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190829000944.20722-1-lyude@redhat.com
2019-12-05drm/mgag200: Debug-print unique revisions id on G200 SEThomas Zimmermann1-1/+4
The behavior of MGA G200 SE depends on the rev id. Print the id when debugging is enabled. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191204133435.17462-1-tzimmermann@suse.de
2019-12-05drm/mgag200: Call mgag200_driver_{load, unload}() before registering deviceThomas Zimmermann1-6/+38
The load/unload callbacks in struct drm_driver are deprecated. Remove them and call functions explicitly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191205090252.5711-1-tzimmermann@suse.de
2019-12-05drm/gma500: Call psb_driver_{load, unload}() before registering deviceThomas Zimmermann1-6/+37
The load/unload callbacks in struct drm_driver are deprecated. Remove them and call functions explicitly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191204184617.22201-1-tzimmermann@suse.de
2019-12-05drm: constify fb ops across all driversJani Nikula13-14/+14
Now that the fbops member of struct fb_info is const, we can start making the ops const as well. Cc: dri-devel@lists.freedesktop.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/59b43629ac60031c5bbf961d8c49695019bc9c6f.1575390740.git.jani.nikula@intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-13 07:09:42 +0000