summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2013-08-23Merge tag 'drm-intel-fixes-2013-08-23' of ↵Dave Airlie2-0/+14
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Just one patch that soaked for quite a bit to fix a resume issue, resulting in gpu hangs (or worse) due to tlb containing garbage. * tag 'drm-intel-fixes-2013-08-23' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Invalidate TLBs for the rings after a reset
2013-08-22gma500: Fix SDVO turning off randomlyGuillaume Clement1-1/+2
Some Poulsbo cards seem to incorrectly report SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED instead of SDVO_CMD_STATUS_PENDING, which causes the display to be turned off. Signed-off-by: Guillaume Clement <gclement@baobob.org> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-22Merge branch 'drm-nouveau-next' of ↵Dave Airlie15-48/+98
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes regression fixes and null derefs and oops fixes. * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nv04/disp: fix framebuffer pin refcounting drm/nouveau/mc: fix race condition between constructor and request_irq() drm/nouveau: fix reclocking on nv40 drm/nouveau/ltcg: fix allocating memory as free drm/nouveau/ltcg: fix ltcg memory initialization after suspend drm/nouveau/fb: fix null derefs in nv49 and nv4e init
2013-08-21drm/nv04/disp: fix framebuffer pin refcountingBen Skeggs3-15/+47
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-08-21drm/nouveau/mc: fix race condition between constructor and request_irq()Ben Skeggs7-14/+14
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-08-21drm/nouveau: fix reclocking on nv40Pali Rohár1-1/+1
In commit 77145f1cbdf8d28b46ff8070ca749bad821e0774 was introduced error which cause that reclocking on nv40 not working anymore. There is missing assigment of return value from pll_calc to ret. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-08-21drm/nouveau/ltcg: fix allocating memory as freeMaarten Lankhorst2-1/+5
Allocating type=0 marks the memory as free. This allows the ltcg memory to be allocated twice. Add a BUG_ON in core/mm.c to prevent this ever happening again. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-08-21drm/nouveau/ltcg: fix ltcg memory initialization after suspendMaarten Lankhorst1-9/+23
Some registers were not initialized in init, this causes them to be uninitialized after suspend. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-08-21drm/nouveau/fb: fix null derefs in nv49 and nv4e initIlia Mirkin2-8/+8
Commit dceef5d87 (drm/nouveau/fb: initialise vram controller as pfb sub-object) moved some code around and introduced these null derefs. pfb->ram is set to the new ram object outside of this ctor. Reported-by: Ronald Uitermark <ronald645@gmail.com> Tested-by: Ronald Uitermark <ronald645@gmail.com> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-08-19Merge tag 'drm-intel-fixes-2013-08-15' of ↵Dave Airlie1-29/+57
git://people.freedesktop.org/~danvet/drm-intel * tag 'drm-intel-fixes-2013-08-15' of git://people.freedesktop.org/~danvet/drm-intel: (153 commits) drm/i915: Don't deref pipe->cpu_transcoder in the hangcheck code
2013-08-19drm/i915: unpin backing storage in dmabuf_unmapDaniel Vetter1-0/+8
This fixes a WARN in i915_gem_free_object when the obj->pages_pin_count isn't 0. v2: Add locking to unmap, noticed by Chris Wilson. Note that even though we call unmap with our own dev->struct_mutex held that won't result in an immediate deadlock since we never go through the dma_buf interfaces for our own, reimported buffers. But it's still easy to blow up and anger lockdep, but that's already the case with our ->map implementation. Fixing this for real will involve per dma-buf ww mutex locking by the callers. And lots of fun. So go with the duct-tape approach for now. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reported-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Tested-by: Armin K. <krejzi@email.com> (v1) Tested-by: Dave Airlie <airlied@redhat.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-18drm/i915: Invalidate TLBs for the rings after a resetChris Wilson2-0/+14
After any "soft gfx reset" we must manually invalidate the TLBs associated with each ring. Empirically, it seems that a suspend/resume or D3-D0 cycle count as a "soft reset". The symptom is that the hardware would fail to note the new address for its status page, and so it would continue to write the shadow registers and breadcrumbs into the old physical address (now used by something completely different, scary). Whereas the driver would read the new status page and never see any progress, it would appear that the GPU hung immediately upon resume. Based on a patch by naresh kumar kachhi <naresh.kumar.kacchi@intel.com> Reported-by: Thiago Macieira <thiago@kde.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64725 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Thiago Macieira <thiago@kde.org> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-15drm/radeon: fix WREG32_OR macro setting bits in a registerRafał Miłecki1-1/+1
This bug (introduced in 3.10) in WREG32_OR made commit d3418eacad403033e95e49dc14afa37c2112c134 "drm/radeon/evergreen: setup HDMI before enabling it" cause a regression. Sometimes audio over HDMI wasn't working, sometimes display was corrupted. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60687 https://bugzilla.kernel.org/show_bug.cgi?id=60709 https://bugs.freedesktop.org/show_bug.cgi?id=67767 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-14drm/radeon/r7xx: fix copy paste typo in golden register setupAlex Deucher1-6/+6
Uses the wrong array size for some asics which can lead to garbage getting written to registers. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60674 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-14drm/i915: Don't deref pipe->cpu_transcoder in the hangcheck codeChris Wilson1-29/+57
If we get an error event really early in the driver setup sequence, which gen3 is especially prone to with various display GTT faults we Oops. So try to avoid this. Additionally with Haswell the transcoders are a separate bank of registers from the pipes (4 transcoders, 3 pipes). In event of an error, we want to be sure we have a complete and accurate picture of the machine state, so record all the transcoders in addition to all the active pipes. This regression has been introduced in commit 702e7a56af3780d8b3a717f698209bef44187bb0 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Tue Oct 23 18:29:59 2012 -0200 drm/i915: convert PIPECONF to use transcoder instead of pipe Based on the patch "drm/i915: Dump all transcoder registers on error" from Chris Wilson: v2: Rebase so that we don't try to be clever and try to figure out the cpu transcoder from hw state. That exercise should be done when we analyze the error state offline. The actual bugfix is to not call intel_pipe_to_cpu_transcoder in the error state capture code in case the pipes aren't fully set up yet. v3: Simplifiy the err->num_transcoders computation a bit. While at it make the error capture stuff save on systems without a display block. v4: Fix fail, spotted by Jani. v5: Completely new commit message, cc: stable. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60021 Cc: stable@vger.kernel.org Tested-by: Dustin King <daking@rescomp.stanford.edu> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-12drm/radeon: fix UVD message buffer validationChristian König1-0/+8
When the message buffer is currently moving block until it is idle again. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-09Merge tag 'drm-intel-fixes-2013-08-08' of ↵Dave Airlie4-6/+46
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: A few bugfixes for serious stuff and regressions. Highlight is the reinstated hack to keep the i915 backlight on when running on an optimus machine, this prevents black screens especially with some radeon muxed platforms. And the patch to quiet dmesg on Linus' old mac mini ;-) * tag 'drm-intel-fixes-2013-08-08' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: do not disable backlight on vgaswitcheroo switch off drm/i915: Don't call encoder's get_config unless encoder is active drm/i915: avoid brightness overflow when doing scale drm/i915: update last_vblank when disabling the power well drm/i915: fix gen4 digital port hotplug definitions
2013-08-08drm: Don't pass negative delta to ktime_sub_ns()Michel Dänzer1-1/+4
It takes an unsigned value. This happens not to blow up on 64-bit architectures, but it does on 32-bit, causing drm_calc_vbltimestamp_from_scanoutpos() to calculate totally bogus timestamps for vblank events. Which in turn causes e.g. gnome-shell to hang after a DPMS off cycle with current xf86-video-ati Git. [airlied: regression introduced in drm: use monotonic time in drm_calc_vbltimestamp_from_scanoutpos] Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59339 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59836 Tested-by: shui yangwei <yangweix.shui@intel.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-08Merge branch 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linuxDave Airlie24-158/+300
Some more radeon fixes. Mostly dpm and uvd fixes. Fixes hangs with dpm on more rv6xx asics, and fixes suspend and resume with UVD. * 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: make missing smc ucode non-fatal drm/radeon/dpm: require rlc for dpm drm/radeon/cik: use a mutex to properly lock srbm instanced registers drm/radeon: remove unnecessary unpin drm/radeon: add more UVD CS checking drm/radeon: stop sending invalid UVD destroy msg drm/radeon: only save UVD bo when we have open handles drm/radeon: always program the MC on startup drm/radeon: fix audio dto calculation on DCE3+ (v3) drm/radeon/dpm: disable sclk ss on rv6xx drm/radeon: fix halting UVD drm/radeon/dpm: adjust power state properly for UVD on SI drm/radeon/dpm: fix spread spectrum setup (v2) drm/radeon/dpm: adjust thermal protection requirements drm/radeon: select audio dto based on encoder id for DCE3 drm/radeon: properly handle pm on gpu reset
2013-08-07drm/radeon: make missing smc ucode non-fatalAlex Deucher4-10/+26
The smc ucode is required for dpm (dynamic power management), but if it's missing just skip dpm setup and don't disable acceleration. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=67876 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon/dpm: require rlc for dpmAlex Deucher1-1/+4
The rlc is required for dpm to work properly, so if the rlc ucode is missing, don't enable dpm. Enabling dpm without the rlc enabled can result in hangs. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon/cik: use a mutex to properly lock srbm instanced registersAlex Deucher3-0/+13
We need proper locking in the driver when accessing instanced registers on CIK. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon: remove unnecessary unpinChristian König1-1/+0
We don't pin the BO on allocation, so don't unpin it on free. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon: add more UVD CS checkingChristian König1-8/+35
Improve error handling in case userspace sends us an invalid command buffer. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon: stop sending invalid UVD destroy msgChristian König1-2/+2
We also need to check the handle. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon: only save UVD bo when we have open handlesChristian König5-17/+37
Otherwise just reinitialize from scratch on resume, and so make it more likely to succeed. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon: always program the MC on startupAlex Deucher6-6/+12
For r6xx+ asics. This mirrors the behavior of pre-r6xx asics. We need to program the MC even if something else in startup() fails. Failure to do so results in an unusable GPU. Based on a fix from: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-07drm/radeon: fix audio dto calculation on DCE3+ (v3)Alex Deucher4-6/+59
Need to set the wallclock ratio and adjust the phase and module registers appropriately. May fix problems with audio timing at certain display timings. v2: properly handle clocks below 24mhz v3: rebase r600 changes Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon/dpm: disable sclk ss on rv6xxAlex Deucher1-0/+3
Enabling spread spectrum on the engine clock leads to hangs on some asics. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=66963 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon: fix halting UVDChristian König7-11/+36
Removing the clock/power or resetting the VCPU can cause hangs if that happens in the middle of a register write. Stall the memory and register bus before putting the VCPU into reset. Keep it in reset when unloading the module or suspending. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon/dpm: adjust power state properly for UVD on SIAlex Deucher1-12/+32
There are some hardware issue with reclocking on SI when UVD is active, so use a stable power state when UVD is active. Fixes possible hangs and performance issues when using UVD on SI. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon/dpm: fix spread spectrum setup (v2)Alex Deucher7-76/+30
Need to check for engine and memory clock ss separately and only enable dynamic ss if either of them are found. This should fix systems which have a ss table, but do not have entries for engine or memory. On those systems we may enable dynamic spread spectrum without enabling it on the engine or memory clocks which can lead to a hang in some cases. fixes some systems reported here: https://bugs.freedesktop.org/show_bug.cgi?id=66963 v2: fix typo Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon/dpm: adjust thermal protection requirementsAlex Deucher5-10/+5
On rv770 and newer, clock gating is not required for thermal protection. The only requirement is that the design utilizes a thermal sensor. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon: select audio dto based on encoder id for DCE3Alex Deucher1-3/+9
There are two audio dtos on radeon asics that you can select between. Normally, dto0 is used for hdmi and dto1 for DP, but it seems that the dto is somehow tied to the encoders on DCE3 asics. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=67435 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-07drm/radeon: properly handle pm on gpu resetAlex Deucher1-0/+2
When we reset the GPU, we need to properly tear down power management before reseting the GPU and then set it back up again after reset. Add the missing radeon_pm_[suspend|resume] calls to the gpu reset function. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/i915: do not disable backlight on vgaswitcheroo switch offJani Nikula1-0/+11
On muxed systems, the other vgaswitcheroo client may depend on i915 to handle the backlight. We began switching off the backlight since commit a261b246ebd552fd5d5a8ed84cc931bb821c427f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jul 26 19:21:47 2012 +0200 drm/i915: disable all crtcs at suspend time breaking backlight on discreet graphics in (some) muxed systems. Keep the backlight on when the state is changed through vgaswitcheroo. Note: The alternative would be to add a quirk table to achieve the same based on system identifiers, but AFAICS it would asymptotically approach effectively the same as this patch as more IDs are added, but with the maintenance burden of the quirk table. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=55311 Tested-by: Fede <fedevx@yahoo.com> Tested-by: Aximab <laurent.debian@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59785 Tested-by: sfievet <sebastien.fievet@free.fr> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-07drm/i915: Don't call encoder's get_config unless encoder is activeVille Syrjälä1-1/+3
The SDVO code tries to compare the encoder's and crtc's idea of the pixel_multiplier. Normally they have to match, but when transitioning to DPMS off, we turn off the pipe before reading out the pipe_config, so the pixel_multiplier in the pipe_config will be 0, whereas the encoder will still have its pixel_multiplier set to whatever value we were using when the display was active. This leads to a warning from intel_modeset_check_state(). WARNING: CPU: 1 PID: 2846 at drivers/gpu/drm/i915/intel_sdvo.c:1378 intel_sdvo_get_config+0x158/0x160() SDVO pixel multiplier mismatch, port: 0, encoder: 1 Modules linked in: snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep CPU: 1 PID: 2846 Comm: Xorg Not tainted 3.11.0-rc3-00208-gbe1e8d7-dirty #19 Hardware name: Apple Computer, Inc. Macmini1,1/Mac-F4208EC8, BIOS MM11.88Z.0055.B03.0604071521 04/07/06 00000000 00000000 ef0afa54 c1597bbb c1737ea4 ef0afa84 c10392ca c1737e6c ef0afab0 00000b1e c1737ea4 00000562 c12dfbe8 c12dfbe8 ef0afb14 00000000 f697ec00 ef0afa9c c103936e 00000009 ef0afa94 c1737e6c ef0afab0 ef0afadc Call Trace: [<c1597bbb>] dump_stack+0x41/0x56 [<c10392ca>] warn_slowpath_common+0x7a/0xa0 [<c103936e>] warn_slowpath_fmt+0x2e/0x30 [<c12dfbe8>] intel_sdvo_get_config+0x158/0x160 [<c12c3220>] check_crtc_state+0x1e0/0xb10 [<c12cdc7d>] intel_modeset_check_state+0x29d/0x7c0 [<c12dfe5c>] intel_sdvo_dpms+0x5c/0xa0 [<c12985de>] drm_mode_obj_set_property_ioctl+0x40e/0x420 [<c1298625>] drm_mode_connector_property_set_ioctl+0x35/0x40 [<c1289294>] drm_ioctl+0x3e4/0x540 [<c10fc1a2>] do_vfs_ioctl+0x72/0x570 [<c10fc72f>] SyS_ioctl+0x8f/0xa0 [<c159b7fa>] sysenter_do_call+0x12/0x22 ---[ end trace 7ce940aff1366d60 ]--- Fix the problem by skipping the encoder get_config() function for inactive encoders. Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-07drm/i915: avoid brightness overflow when doing scaleAaron Lu1-2/+5
Some card's max brightness level is pretty large, e.g. on Acer Aspire 4732Z, the max level is 989910. If user space set a large enough level then the current scale done in intel_panel_set_backlight will cause an integer overflow and the scaled level will be mistakenly small, leaving user with an almost black screen. This patch fixes this problem. Signed-off-by: Aaron Lu <aaron.lu@intel.com> [danvet: Add a comment to explain what's going on.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-07drm/i915: update last_vblank when disabling the power wellPaulo Zanoni1-0/+18
The DRM layer keeps track of our vblanks and it assumes our vblank counters only go back to zero when they overflow. The problem is that when we disable the power well our counters also go to zero, but it doesn't mean they did overflow. So on this patch we grab the lock and update last_vblank so the DRM layer won't think our counters overflowed. This patch fixes the following intel-gpu-tools test: ./kms_flip --run-subtest blocking-absolute-wf_vblank Regression introduced by the following commit: commit bf51d5e2cda5d36d98e4b46ac7fca9461e512c41 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Wed Jul 3 17:12:13 2013 -0300 drm/i915: switch disable_power_well default value to 1 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66808 Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Added a comment that this might be better done in drm_vblank_post_modeset in general.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-07drm/i915: fix gen4 digital port hotplug definitionsDaniel Vetter1-3/+9
Apparently Bspec is wrong in this case here even for gm45. Note that Bspec is horribly misguided on i965g/gm, so we don't have any other data points besides that it seems to make machines work better. With this changes all the bits in PORT_HOTPLUG_STAT for the digital ports are ordered the same way. This seems to agree with what register dumps from the hpd storm handling code shows, where the LIVE bit and the short/long pulse STATUS bits light up at the same time with this enumeration (but no with the one from Bspec). Also tested on my gm45 which has two DP+ ports, and everything seems to still work as expected. References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg23054.html Cc: Egbert Eich <eich@suse.com> Cc: Jan Niggemann <jn@hz6.de> Tested-by: Jan Niggemann <jn@hz6.de> [danvet: Add a big warning that Bspec seems to be wrong for these bits, suggested by Jani.] Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-07drm/ast: invalidate page tables when pinning a BODave Airlie1-0/+1
same fix as cirrus and mgag200. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-07drm/mgag200: Invalidate page tables when pinning a BOEgbert Eich1-0/+1
When a BO gets pinned the placement may get changed. If the memory is mapped into user space and user space has already accessed the mapped range the page tables are set up but now point to the wrong memory. Set bo.mdev->dev_mapping in mgag200_bo_create() to make sure that ttm_bo_unmap_virtual() called from ttm_bo_handle_move_mem() will take care of this. v2: Don't call ttm_bo_unmap_virtual() in mgag200_bo_pin(), fix comment. Signed-off-by: Egbert Eich <eich@suse.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-07drm/cirrus: Invalidate page tables when pinning a BOMichal Srb1-0/+1
This is a cirrus version of Egbert Eich's patch for mgag200. Without bo.bdev->dev_mapping set, the ttm_bo_unmap_virtual_locked called from ttm_bo_handle_move_mem returns with no effect. If any application accessed the memory before it was moved, it will access wrong memory next time. This causes crashes when changing resolution down. Signed-off-by: Michal Srb <msrb@suse.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-04drm/radeon: fix 64 bit divide in SI spm codeAlex Deucher1-1/+1
Forgot to use the appropriate math64 function. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-31drm/i915: fix missed hunk after GT access breakageBen Widawsky3-0/+8
Upon some code refactoring, a hunk was missed. This was fixed for next, but missed the current trees, and hasn't yet been merged by Dave Airlie. It is fixed in: commit 907b28c56ea40629aa6595ddfa414ec2fc7da41c Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jul 19 20:36:52 2013 +0100 drm/i915: Colocate all GT access routines in the same file It is introduced by: commit 181d1b9e31c668259d3798c521672afb8edd355c Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Jul 21 13:16:24 2013 +0200 drm/i915: fix up gt init sequence fallout Reported-by: Dave Jones <davej@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-07-31Merge branch 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linuxDave Airlie2-5/+11
Alex writes: - more fixes for SI dpm - fix DP on some rv6xx boards * 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/dpm: re-enable cac control on SI drm/radeon/dpm: fix calculations in si_calculate_leakage_for_v_and_t_formula drm: fix 64 bit drm fixed point helpers drm/radeon/atom: initialize more atom interpretor elements to 0
2013-07-30drm/radeon/dpm: re-enable cac control on SIAlex Deucher1-2/+1
Now that the fixed point functions are fixed we can re-enable cac support. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-30drm/radeon/dpm: fix calculations in si_calculate_leakage_for_v_and_t_formulaAlex Deucher1-3/+5
Need to make some slight adjustments for the fixed point math to work properly. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-30drm/radeon/atom: initialize more atom interpretor elements to 0Alex Deucher1-0/+5
The ProcessAuxChannel table on some rv635 boards assumes the divmul members are initialized to 0 otherwise we get an invalid fb offset since it has a bad mask set when setting the fb base. While here initialize all the atom interpretor elements to 0. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60639 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-07-30Merge branch 'drm-nouveau-next' of ↵Dave Airlie17-56/+79
git://anongit.freedesktop.org/git/nouveau/linux-2.6 nouveau fixes a number of regressions and a few user triggerable oops since -rc1. Along with a few mpeg engine fixes. * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: fix semaphore dmabuf obj drm/nouveau/vm: make vm refcount into a kref drm/nv31/mpeg: don't recognize nv3x cards as having nv44 graph class drm/nv40/mpeg: write magic value to channel object to make it work drm/nouveau: fix size check for cards without vm drm/nv50-/disp: remove dcb_outp_match call, and related variables drm/nva3-/disp: fix hda eld writing, needs to be padded drm/nv31/mpeg: fix mpeg engine initialization drm/nv50/mc: include vp in the fb error reporting mask drm/nouveau: fix null pointer dereference in poll_changed drm/nv50/gpio: post-nv92 cards have 32 interrupt lines drm/nvc0/fb: take lock in nvc0_ram_put() drm/nouveau/core: xtensa firmware size needs to be 0x40000 no matter what
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 12:18:30 +0000