Age | Commit message (Collapse) | Author | Files | Lines |
|
Gcc-12 correctly warned about this code using a non-NULL pointer as a
truth value:
drivers/gpu/drm/imx/ipuv3-crtc.c: In function ‘ipu_crtc_disable_planes’:
drivers/gpu/drm/imx/ipuv3-crtc.c:72:21: error: the comparison will always evaluate as ‘true’ for the address of ‘plane’ will never be NULL [-Werror=address]
72 | if (&ipu_crtc->plane[1] && plane == &ipu_crtc->plane[1]->base)
| ^
due to the extraneous '&' address-of operator.
Philipp Zabel points out that The mistake had no adverse effect since
the following condition doesn't actually dereference the NULL pointer,
but the intent of the code was obviously to check for it, not to take
the address of the member.
Fixes: eb8c88808c83 ("drm/imx: add deferred plane disabling")
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull bitmap updates from Yury Norov:
- bitmap: optimize bitmap_weight() usage, from me
- lib/bitmap.c make bitmap_print_bitmask_to_buf parseable, from Mauro
Carvalho Chehab
- include/linux/find: Fix documentation, from Anna-Maria Behnsen
- bitmap: fix conversion from/to fix-sized arrays, from me
- bitmap: Fix return values to be unsigned, from Kees Cook
It has been in linux-next for at least a week with no problems.
* tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux: (31 commits)
nodemask: Fix return values to be unsigned
bitmap: Fix return values to be unsigned
KVM: x86: hyper-v: replace bitmap_weight() with hweight64()
KVM: x86: hyper-v: fix type of valid_bank_mask
ia64: cleanup remove_siblinginfo()
drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate
KVM: s390: replace bitmap_copy with bitmap_{from,to}_arr64 where appropriate
lib/bitmap: add test for bitmap_{from,to}_arr64
lib: add bitmap_{from,to}_arr64
lib/bitmap: extend comment for bitmap_(from,to)_arr32()
include/linux/find: Fix documentation
lib/bitmap.c make bitmap_print_bitmask_to_buf parseable
MAINTAINERS: add cpumask and nodemask files to BITMAP_API
arch/x86: replace nodes_weight with nodes_empty where appropriate
mm/vmstat: replace cpumask_weight with cpumask_empty where appropriate
clocksource: replace cpumask_weight with cpumask_empty in clocksource.c
genirq/affinity: replace cpumask_weight with cpumask_empty where appropriate
irq: mips: replace cpumask_weight with cpumask_empty where appropriate
drm/i915/pmu: replace cpumask_weight with cpumask_empty where appropriate
arch/x86: replace cpumask_weight with cpumask_empty where appropriate
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull initial Loongarch architecture code from Arnd Bergmann:
"This is the majority of the loongarch architecture code, including the
final system call interface and all core functionality.
It still misses three sets of peripheral but vital patches to add
support for other subsystems, which have yet to pass review:
- The drivers/firmware/efi stub for booting from a standard UEFI
firmware implementation. Both the original custom boot interface
and a draft implementation of the EFI stub did not make it, so it
is currently impossible to boot the kernel, until the loongarch
specific portions get accepted into the UEFI subsystem
- The drivers/irqchip/irq-loongson-*.c drivers are shared with the
the MIPS port, but currently lack support for ACPI based booting,
which will get merged through the irqchip subsystem.
- Similarly, the drivers/pci/controller/pci-loongson.c needs to be
modified for ACPI support, which will be merged through the PCI
subsystem.
While the port cannot actually be used before all the above are
merged, having it in 5.19 helps to establish the user space ABI for
the libc ports to build on, and to help any treewide changes in the
mainline kernel get applied here as well.
A gcc-12 based tool chains for build testing is now included in
https://mirrors.edge.kernel.org/pub/tools/crosstool/"
Original description from Huacai Chen:
"LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V.
LoongArch includes a reduced 32-bit version (LA32R), a standard 32-bit
version (LA32S) and a 64-bit version (LA64). LoongArch use ACPI as its
boot protocol LoongArch-specific interrupt controllers (similar to APIC)
are already added in the next revision of ACPI Specification (current
revision is 6.4).
This patchset is adding basic LoongArch support in mainline kernel, we
can see a complete snapshot here:
https://github.com/loongson/linux/tree/loongarch-next
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson.git/log/?h=loongarch-next
Cross-compile tool chain to build kernel:
https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-2022-03-03-cross-tools-gcc-glibc.tar.xz
A CLFS-based Linux distro:
https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-system-2022-03-03.tar.bz2
Open-source tool chain which is under review (Binutils and Gcc are already upstream):
https://github.com/loongson/binutils-gdb/tree/upstream_v3.1
https://github.com/loongson/gcc/tree/loongarch_upstream_v6.3
https://github.com/loongson/glibc/tree/loongarch_2_35_dev_v2.2
Loongson and LoongArch documentations:
https://github.com/loongson/LoongArch-Documentation
LoongArch-specific interrupt controllers:
https://mantis.uefi.org/mantis/view.php?id=2203
https://mantis.uefi.org/mantis/view.php?id=2313"
Link: https://lore.kernel.org/lkml/20220603072053.35005-1-chenhuacai@loongson.cn/
* tag 'loongarch-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
MAINTAINERS: Add maintainer information for LoongArch
LoongArch: Add Loongson-3 default config file
LoongArch: Add Non-Uniform Memory Access (NUMA) support
LoongArch: Add multi-processor (SMP) support
LoongArch: Add VDSO and VSYSCALL support
LoongArch: Add some library functions
LoongArch: Add misc common routines
LoongArch: Add ELF and module support
LoongArch: Add signal handling support
LoongArch: Add system call support
LoongArch: Add memory management
LoongArch: Add process management
LoongArch: Add exception/interrupt handling
LoongArch: Add boot and setup routines
LoongArch: Add other common headers
LoongArch: Add atomic/locking headers
LoongArch: Add CPU definition headers
LoongArch: Add build infrastructure
LoongArch: Add writecombine support for drm
LoongArch: Add ELF-related definitions
...
|
|
Pull more drm updates from Dave Airlie:
"This is mostly regular fixes, msm and amdgpu. There is a tegra patch
that is bit of prep work for a 5.20 feature to avoid some inter-tree
syncs, and a couple of late addition amdgpu uAPI changes but best to
get those in early, and the userspace pieces are ready.
msm:
- Limiting WB modes to max sspp linewidth
- Fixing the supported rotations to add 180 back for IGT
- Fix to handle pm_runtime_get_sync() errors to avoid unclocked
access in the bind() path for dpu driver
- Fix the irq_free() without request issue which was a big-time
hitter in the CI-runs.
amdgpu:
- Update fdinfo to the common drm format
- uapi:
- Add VM_NOALLOC GPUVM attribute to prevent buffers for going
into the MALL
- Add AMDGPU_GEM_CREATE_DISCARDABLE flag to create buffers that
can be discarded on eviction
- Mesa code which uses these:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16466
- Link training fixes
- DPIA fixes
- Misc code cleanups
- Aux fixes
- Hotplug fixes
- More FP clean up
- Misc GFX9/10 fixes
- Fix a possible memory leak in SMU shutdown
- SMU 13 updates
- RAS fixes
- TMZ fixes
- GC 11 updates
- SMU 11 metrics fixes
- Fix coverage blend mode for overlay plane
- Note DDR vs LPDDR memory
- Fuzz fix for CS IOCTL
- Add new PCI DID
amdkfd:
- Clean up hive setup
- Misc fixes
tegra:
- add some prelim 5.20 work to avoid inter-tree mess"
* tag 'drm-next-2022-06-03-1' of git://anongit.freedesktop.org/drm/drm: (57 commits)
drm/msm/dpu: Move min BW request and full BW disable back to mdss
drm/msm/dpu: Fix pointer dereferenced before checking
drm/msm/dpu: Remove unused code
drm/msm/disp/dpu1: remove superfluous init
drm/msm/dp: Always clear mask bits to disable interrupts at dp_ctrl_reset_irq_ctrl()
gpu: host1x: Add context bus
drm/amdgpu: add drm-client-id to fdinfo v2
drm/amdgpu: Convert to common fdinfo format v5
drm/amdgpu: bump minor version number
drm/amdgpu: add AMDGPU_VM_NOALLOC v2
drm/amdgpu: add AMDGPU_GEM_CREATE_DISCARDABLE
drm/amdgpu: add beige goby PCI ID
drm/amd/pm: Return auto perf level, if unsupported
drm/amdkfd: fix typo in comment
drm/amdgpu/gfx: fix typos in comments
drm/amdgpu/cs: make commands with 0 chunks illegal behaviour.
drm/amdgpu: differentiate between LP and non-LP DDR memory
drm/amdgpu: Resolve pcie_bif RAS recovery bug
drm/amdgpu: clean up asd on the ta_firmware_header_v2_0
drm/amdgpu/discovery: validate VCN and SDMA instances
...
|
|
The smu_v1X_0_set_allowed_mask() uses bitmap_copy() to convert
bitmap to 32-bit array. This may be wrong due to endiannes issues.
Fix it by switching to bitmap_{from,to}_arr32.
CC: Alexander Gordeev <agordeev@linux.ibm.com>
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: Christian Borntraeger <borntraeger@linux.ibm.com>
CC: Claudio Imbrenda <imbrenda@linux.ibm.com>
CC: David Hildenbrand <david@redhat.com>
CC: Heiko Carstens <hca@linux.ibm.com>
CC: Janosch Frank <frankja@linux.ibm.com>
CC: Rasmus Villemoes <linux@rasmusvillemoes.dk>
CC: Sven Schnelle <svens@linux.ibm.com>
CC: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
i915_pmu_cpu_online() calls cpumask_weight() to check if any bit of a
given cpumask is set. We can do it more efficiently with cpumask_empty()
because cpumask_empty() stops traversing the cpumask as soon as it finds
first set bit, while cpumask_weight() counts all bits unconditionally.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
LoongArch maintains cache coherency in hardware, but its WUC attribute
(Weak-ordered UnCached, which is similar to WC) is out of the scope of
cache coherency machanism. This means WUC can only used for write-only
memory regions.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
https://gitlab.freedesktop.org/drm/tegra into drm-next
drm/tegra: Preparatory work for v5.19
This contains a single patch from a series that's ready to go for v5.10
but is also a shared build-time dependency for an IOMMU series that is
planned for v5.20. The idea is to take this into v5.19 to fulfill that
dependency and remove the need for close coordination for the two
series.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601100335.3841301-1-thierry.reding@gmail.com
|
|
https://gitlab.freedesktop.org/abhinavk/msm into drm-next
5.19 fixes for msm-next
- Fix to add minimum ICC vote in the msm_mdss pm_resume path to address
bootup splats
- Fix to avoid dereferencing without checking in WB encoder
- Fix to avoid crash during suspend in DP driver by ensuring interrupt
mask bits are updated
- Remove unused code from dpu_encoder_virt_atomic_check()
- Fix to remove redundant init of dsc variable
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/927b201e-a734-a29d-b9fb-b9889e1f7795@quicinc.com
|
|
In commit a670ff578f1f ("drm/msm/dpu: always use mdp device to scale
bandwidth") we fully moved interconnect stuff to the DPU driver. This
had no change for sc7180 but _did_ have an impact for other SoCs. It
made them match the sc7180 scheme.
Unfortunately, the sc7180 scheme seems like it was a bit broken.
Specifically the interconnect needs to be on for more than just the
DPU driver's AXI bus. In the very least it also needs to be on for the
DSI driver's AXI bus. This can be seen fairly easily by doing this on
a ChromeOS sc7180-trogdor class device:
set_power_policy --ac_screen_dim_delay=5 --ac_screen_off_delay=10
sleep 10
cd /sys/bus/platform/devices/ae94000.dsi/power
echo on > control
When you do that, you'll get a warning splat in the logs about
"gcc_disp_hf_axi_clk status stuck at 'off'".
One could argue that perhaps what I have done above is "illegal" and
that it can't happen naturally in the system because in normal system
usage the DPU is pretty much always on when DSI is on. That being
said:
* In official ChromeOS builds (admittedly a 5.4 kernel with backports)
we have seen that splat at bootup.
* Even though we don't use "autosuspend" for these components, we
don't use the "put_sync" variants. Thus plausibly the DSI could stay
"runtime enabled" past when the DPU is enabled. Techncially we
shouldn't do that if the DPU's suspend ends up yanking our clock.
Let's change things such that the "bare minimum" request for the
interconnect happens in the mdss driver again. That means that all of
the children can assume that the interconnect is on at the minimum
bandwidth. We'll then let the DPU request the higher amount that it
wants.
It should be noted that this isn't as hacky of a solution as it might
initially appear. Specifically:
* Since MDSS and DPU individually get their own references to the
interconnect then the framework will actually handle aggregating
them. The two drivers are _not_ clobbering each other.
* When the Qualcomm interconnect driver aggregates it takes the max of
all the peaks. Thus having MDSS request a peak, as we're doing here,
won't actually change the total interconnect bandwidth (it won't be
added to the request for the DPU). This perhaps explains why the
"average" requested in MDSS was historically 0 since that one
_would_ be added in.
NOTE also that in the downstream ChromeOS 5.4 and 5.15 kernels, we're
also seeing some RPMH hangs that are addressed by this fix. These
hangs are showing up in the field and on _some_ devices with enough
stress testing of suspend/resume. Specifically right at suspend time
with a stack crawl that looks like this (from chromeos-5.15 tree):
rpmh_write_batch+0x19c/0x240
qcom_icc_bcm_voter_commit+0x210/0x420
qcom_icc_set+0x28/0x38
apply_constraints+0x70/0xa4
icc_set_bw+0x150/0x24c
dpu_runtime_resume+0x50/0x1c4
pm_generic_runtime_resume+0x30/0x44
__genpd_runtime_resume+0x68/0x7c
genpd_runtime_resume+0x12c/0x20c
__rpm_callback+0x98/0x138
rpm_callback+0x30/0x88
rpm_resume+0x370/0x4a0
__pm_runtime_resume+0x80/0xb0
dpu_kms_enable_commit+0x24/0x30
msm_atomic_commit_tail+0x12c/0x630
commit_tail+0xac/0x150
drm_atomic_helper_commit+0x114/0x11c
drm_atomic_commit+0x68/0x78
drm_atomic_helper_disable_all+0x158/0x1c8
drm_atomic_helper_suspend+0xc0/0x1c0
drm_mode_config_helper_suspend+0x2c/0x60
msm_pm_prepare+0x2c/0x40
pm_generic_prepare+0x30/0x44
genpd_prepare+0x80/0xd0
device_prepare+0x78/0x17c
dpm_prepare+0xb0/0x384
dpm_suspend_start+0x34/0xc0
We don't completely understand all the mechanisms in play, but the
hang seemed to come and go with random factors. It's not terribly
surprising that the hang is gone after this patch since the line of
code that was failing is no longer present in the kernel.
Fixes: a670ff578f1f ("drm/msm/dpu: always use mdp device to scale bandwidth")
Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # RB3 (sdm845) and
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/487884/
Link: https://lore.kernel.org/r/20220531160059.v2.1.Ie7f6d4bf8cce28131da31a43354727e417cae98d@changeid
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
The phys_enc->wb_idx is dereferencing before null checking, so move
it after checking.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: d7d0e73f7de33 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/487606/
Link: https://lore.kernel.org/r/1653877196-23114-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Eliminate the follow clang warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:544:33: warning: variable
‘mode’ set but not used [-Wunused-but-set-variable].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Fixes: 3177589c6e93("drm/msm/dpu: encoder: drop unused mode_fixup callback")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/487136/
Link: https://lore.kernel.org/r/20220524081413.37895-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Commit 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in
encoder") added dsc_common_mode variable which was set to zero but then
again programmed, so drop the superfluous init.
Fixes: 58dca9810749 ("drm/msm/disp/dpu1: Add support for DSC in encoder")
Reported-by: kernel test robot <yujie.liu@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/487208/
Link: https://lore.kernel.org/r/20220525073912.2706505-1-vkoul@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
dp_ctrl_reset_irq_ctrl()
dp_catalog_ctrl_reset() will software reset DP controller. But it will
not reset programmable registers to default value. DP driver still have
to clear mask bits to interrupt status registers to disable interrupts
after software reset of controller.
At current implementation, dp_ctrl_reset_irq_ctrl() will software reset dp
controller but did not call dp_catalog_ctrl_enable_irq(false) to clear hpd
related interrupt mask bits to disable hpd related interrupts due to it
mistakenly think hpd related interrupt mask bits will be cleared by software
reset of dp controller automatically. This mistake may cause system to crash
during suspending procedure due to unexpected irq fired and trigger event
thread to access dp controller registers with controller clocks are disabled.
This patch fixes system crash during suspending problem by removing "enable"
flag condition checking at dp_ctrl_reset_irq_ctrl() so that hpd related
interrupt mask bits are cleared to prevent unexpected from happening.
Changes in v2:
-- add more details commit text
Changes in v3:
-- add synchrons_irq()
-- add atomic_t suspended
Changes in v4:
-- correct Fixes's commit ID
-- remove synchrons_irq()
Changes in v5:
-- revise commit text
Changes in v6:
-- add event_lock to protect "suspended"
Changes in v7:
-- delete "suspended" flag
Fixes: 989ebe7bc446 ("drm/msm/dp: do not initialize phy until plugin interrupt received")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/486591/
Link: https://lore.kernel.org/r/1652804494-19650-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Pull vfio updates from Alex Williamson:
- Improvements to mlx5 vfio-pci variant driver, including support for
parallel migration per PF (Yishai Hadas)
- Remove redundant iommu_present() check (Robin Murphy)
- Ongoing refactoring to consolidate the VFIO driver facing API to use
vfio_device (Jason Gunthorpe)
- Use drvdata to store vfio_device among all vfio-pci and variant
drivers (Jason Gunthorpe)
- Remove redundant code now that IOMMU core manages group DMA ownership
(Jason Gunthorpe)
- Remove vfio_group from external API handling struct file ownership
(Jason Gunthorpe)
- Correct typo in uapi comments (Thomas Huth)
- Fix coccicheck detected deadlock (Wan Jiabing)
- Use rwsem to remove races and simplify code around container and kvm
association to groups (Jason Gunthorpe)
- Harden access to devices in low power states and use runtime PM to
enable d3cold support for unused devices (Abhishek Sahu)
- Fix dma_owner handling of fake IOMMU groups (Jason Gunthorpe)
- Set driver_managed_dma on vfio-pci variant drivers (Jason Gunthorpe)
- Pass KVM pointer directly rather than via notifier (Matthew Rosato)
* tag 'vfio-v5.19-rc1' of https://github.com/awilliam/linux-vfio: (38 commits)
vfio: remove VFIO_GROUP_NOTIFY_SET_KVM
vfio/pci: Add driver_managed_dma to the new vfio_pci drivers
vfio: Do not manipulate iommu dma_owner for fake iommu groups
vfio/pci: Move the unused device into low power state with runtime PM
vfio/pci: Virtualize PME related registers bits and initialize to zero
vfio/pci: Change the PF power state to D0 before enabling VFs
vfio/pci: Invalidate mmaps and block the access in D3hot power state
vfio: Change struct vfio_group::container_users to a non-atomic int
vfio: Simplify the life cycle of the group FD
vfio: Fully lock struct vfio_group::container
vfio: Split up vfio_group_get_device_fd()
vfio: Change struct vfio_group::opened from an atomic to bool
vfio: Add missing locking for struct vfio_group::kvm
kvm/vfio: Fix potential deadlock problem in vfio
include/uapi/linux/vfio.h: Fix trivial typo - _IORW should be _IOWR instead
vfio/pci: Use the struct file as the handle not the vfio_group
kvm/vfio: Remove vfio_group from kvm
vfio: Change vfio_group_set_kvm() to vfio_file_set_kvm()
vfio: Change vfio_external_check_extension() to vfio_file_enforced_coherent()
vfio: Remove vfio_external_group_match_file()
...
|
|
The context bus is a "dummy" bus that contains struct devices that
correspond to IOMMU contexts assigned through Host1x to processes.
Even when host1x itself is built as a module, the bus is registered
in built-in code so that the built-in ARM SMMU driver is able to
reference it.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Harden hv_sock driver (Andrea Parri)
- Harden Hyper-V PCI driver (Andrea Parri)
- Fix multi-MSI for Hyper-V PCI driver (Jeffrey Hugo)
- Fix Hyper-V PCI to reduce boot time (Dexuan Cui)
- Remove code for long EOL'ed Hyper-V versions (Michael Kelley, Saurabh
Sengar)
- Fix balloon driver error handling (Shradha Gupta)
- Fix a typo in vmbus driver (Julia Lawall)
- Ignore vmbus IMC device (Michael Kelley)
- Add a new error message to Hyper-V DRM driver (Saurabh Sengar)
* tag 'hyperv-next-signed-20220528' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (28 commits)
hv_balloon: Fix balloon_probe() and balloon_remove() error handling
scsi: storvsc: Removing Pre Win8 related logic
Drivers: hv: vmbus: fix typo in comment
PCI: hv: Fix synchronization between channel callback and hv_pci_bus_exit()
PCI: hv: Add validation for untrusted Hyper-V values
PCI: hv: Fix interrupt mapping for multi-MSI
PCI: hv: Reuse existing IRTE allocation in compose_msi_msg()
drm/hyperv: Remove support for Hyper-V 2008 and 2008R2/Win7
video: hyperv_fb: Remove support for Hyper-V 2008 and 2008R2/Win7
scsi: storvsc: Remove support for Hyper-V 2008 and 2008R2/Win7
Drivers: hv: vmbus: Remove support for Hyper-V 2008 and Hyper-V 2008R2/Win7
x86/hyperv: Disable hardlockup detector by default in Hyper-V guests
drm/hyperv: Add error message for fb size greater than allocated
PCI: hv: Do not set PCI_COMMAND_MEMORY to reduce VM boot time
PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI
Drivers: hv: vmbus: Refactor the ring-buffer iterator functions
Drivers: hv: vmbus: Accept hv_sock offers in isolated guests
hv_sock: Add validation for untrusted Hyper-V values
hv_sock: Copy packets sent by Hyper-V out of the ring buffer
hv_sock: Check hv_pkt_iter_first_raw()'s return value
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
|
|
This is enough to get gputop working :)
v2: rebase and some addition cleanup
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Convert fdinfo format to one documented in drm-usage-stats.rst.
It turned out that the existing implementation was actually completely
nonsense. The calculated percentages indeed represented the usage of the
engine, but with varying time slices.
So 10% usage for application A could mean something completely different
than 10% usage for application B.
Completely nuke that and just use the now standardized nanosecond
interface.
v2: drop the documentation change for now, nuke percentage calculation
v3: only account for each hw_ip, move the time_spend to the ctx mgr.
v4: move general ctx changes into separate patch, rework the fdinfo to
ctx_mgr interface so that all usages are calculated at once, drop
some unecessary and dangerous refcount dance.
v5: add one more comment how we calculate the time spend
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Increase the minor version number to indicate that the new flags are
available.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the AMDGPU_VM_NOALLOC flag to let userspace control MALL allocation.
v2: also add the flag to the allowed flags.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a AMDGPU_GEM_CREATE_DISCARDABLE flag to note that the content of a BO
doesn't needs to be preserved during eviction.
KFD was already using a similar functionality for SVM BOs so replace the
internal flag with the new UAPI.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a beige goby PCI ID.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
When powerplay is not enabled, return AUTO as default level.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Spelling mistakes (triple letters) in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Submitting a cs with 0 chunks, causes an oops later, found trying
to execute the wrong userspace driver.
MESA_LOADER_DRIVER_OVERRIDE=v3d glxinfo
[172536.665184] BUG: kernel NULL pointer dereference, address: 00000000000001d8
[172536.665188] #PF: supervisor read access in kernel mode
[172536.665189] #PF: error_code(0x0000) - not-present page
[172536.665191] PGD 6712a0067 P4D 6712a0067 PUD 5af9ff067 PMD 0
[172536.665195] Oops: 0000 [#1] SMP NOPTI
[172536.665197] CPU: 7 PID: 2769838 Comm: glxinfo Tainted: P O 5.10.81 #1-NixOS
[172536.665199] Hardware name: To be filled by O.E.M. To be filled by O.E.M./CROSSHAIR V FORMULA-Z, BIOS 2201 03/23/2015
[172536.665272] RIP: 0010:amdgpu_cs_ioctl+0x96/0x1ce0 [amdgpu]
[172536.665274] Code: 75 18 00 00 4c 8b b2 88 00 00 00 8b 46 08 48 89 54 24 68 49 89 f7 4c 89 5c 24 60 31 d2 4c 89 74 24 30 85 c0 0f 85 c0 01 00 00 <48> 83 ba d8 01 00 00 00 48 8b b4 24 90 00 00 00 74 16 48 8b 46 10
[172536.665276] RSP: 0018:ffffb47c0e81bbe0 EFLAGS: 00010246
[172536.665277] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[172536.665278] RDX: 0000000000000000 RSI: ffffb47c0e81be28 RDI: ffffb47c0e81bd68
[172536.665279] RBP: ffff936524080010 R08: 0000000000000000 R09: ffffb47c0e81be38
[172536.665281] R10: ffff936524080010 R11: ffff936524080000 R12: ffffb47c0e81bc40
[172536.665282] R13: ffffb47c0e81be28 R14: ffff9367bc410000 R15: ffffb47c0e81be28
[172536.665283] FS: 00007fe35e05d740(0000) GS:ffff936c1edc0000(0000) knlGS:0000000000000000
[172536.665284] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[172536.665286] CR2: 00000000000001d8 CR3: 0000000532e46000 CR4: 00000000000406e0
[172536.665287] Call Trace:
[172536.665322] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu]
[172536.665332] drm_ioctl_kernel+0xaa/0xf0 [drm]
[172536.665338] drm_ioctl+0x201/0x3b0 [drm]
[172536.665369] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu]
[172536.665372] ? selinux_file_ioctl+0x135/0x230
[172536.665399] amdgpu_drm_ioctl+0x49/0x80 [amdgpu]
[172536.665403] __x64_sys_ioctl+0x83/0xb0
[172536.665406] do_syscall_64+0x33/0x40
[172536.665409] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2018
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some applications want to know whether the memory is LP or
not.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check shared buf instead of init flag for xgmi ta shared buf init
during xgmi ta initialization.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On the psp13 series use ta_firmware_header_v2_0 and the asd firmware
was buildin ta, so needn't request asd firmware separately.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Validate the VCN and SDMA instances against the driver
structure sizes to make sure we don't get into a
situation where the firmware reports more instances than
the driver supports.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
According to the KMS man page, there is a
"Coverage" alpha blend mode that assumes the
pixel color values have NOT been pre-multiplied
and will be done when the actual blending to
the background color values happens.
Previously, this mode hasn't been enabled
in our driver and it was assumed that all
normal overlay planes are pre-multiplied
by default.
When a 3rd party app is used to input a image
in a specific format, e.g. PNG, as a source
of a overlay plane to blend with the background
primary plane, the pixel color values are not
pre-multiplied. So by adding "Coverage" blend
mode, our driver will support those cases.
Issue fixed: Overlay plane alpha channel blending is incorrect
Issue tracker: https://gitlab.freedesktop.org/drm/amd/-/issues/1769
Reference:
https://dri.freedesktop.org/docs/drm/gpu/drm-kms.html#plane-composition-properties
Adding Coverage support also enables IGT
kms_plane_alpha_blend Coverage subtests:
1. coverage-7efc
2. coverage-vs-premult-vs-constant
Changes
1. Add DRM_MODE_BLEND_COVERAGE blend mode capability
2. Add "pre_multiplied_alpha" flag for Coverage case
3. Read the correct flag and set the DCN MPCC
pre_multiplied register bit (only on overlay plane)
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1769
Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The > ARRAY_SIZE() should be >= ARRAY_SIZE() to prevent an out of bounds
access.
Fixes: e27c41d5b068 ("drm/amd/display: Support for DMUB HPD interrupt handling")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Suppress two compile warnings about "no previous prototype".
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Correct the metrics version used for SMU 11.0.11/12/13.
Fixes misreported GPU metrics (e.g., fan speed, etc.) depending
on which version of SMU firmware is loaded.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1925
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Based on gfx10 with following changes:
- GPR_ALLOC.VGPR_SIZE field moved (and size corrected in gfx10)
- s_sendmsg_rtn_b64 replaces some s_sendmsg/s_getreg
- Buffer instructions no longer have direct-to-LDS modifier
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Laurent Morichetti <laurent.morichetti@amd.com>
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Most of changes are for debugger feature, and it is
to simplify trap handler support for new asics in the
future.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Define HDMI_ACP_SEND register shift/mask.
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On aldebaran, when thermal throttling happens due to excessive GPU
temperature, the reason for throttling event is missed in warning
message. This patch fixes it.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support of IP GC 10.3.7 in amdgpu_gmc_tmz_set.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use IP version rather then code name of IPs for
tmz set.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To enable TMZ feature based on IP version needs adev->ip_version
populated but its empty. Move amdgpu_gmc_tmz_set to a place where
ip_version is populated.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
support umc/gfx/sdma ras on guest side
Changed from V1:
move sriov judgment in amdgpu_ras_interrupt_fatal_error_handler
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is no need to check if "clock_ranges' is non-NULL. It is checked
already on the line before.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With the latest vbios, the memory temp reading is working.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable OOB Monitor and SOC CG which are ready since 78.38.0.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To better match with the pptable_id settings from VBIOS.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To align with 78.37.0 and later PMFWs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since PMFW will handle this properly. Driver involvement is
unnecessary.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|