summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2013-03-23KMS: fix EDID detailed timing frame rateTorsten Duwe1-0/+1
When KMS has parsed an EDID "detailed timing", it leaves the frame rate zeroed. Consecutive (debug-) output of that mode thus yields 0 for vsync. This simple fix also speeds up future invocations of drm_mode_vrefresh(). While it is debatable whether this qualifies as a -stable fix I'd apply it for consistency's sake; drm_helper_probe_single_connector_modes() does the same thing already for all probed modes. Cc: stable@vger.kernel.org Signed-off-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23KMS: fix EDID detailed timing vsync parsingTorsten Duwe1-1/+1
EDID spreads some values across multiple bytes; bit-fiddling is needed to retrieve these. The current code to parse "detailed timings" has a cut&paste error that results in a vsync offset of at most 15 lines instead of 63. See http://en.wikipedia.org/wiki/EDID and in the "EDID Detailed Timing Descriptor" see bytes 10+11 show why that needs to be a left shift. Cc: stable@vger.kernel.org Signed-off-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-21Merge branch 'drm-intel-fixes' of ↵Dave Airlie4-7/+31
git://people.freedesktop.org/~danvet/drm-intel into drm-next Daniel writes: Bunch of fixes, all pretty high-priority - Fix execbuf argument checking (Kees Cook) - Optionally obfuscate kernel addresses in dumps (Kees Cook) - Two patches from Takashi Iwai to fix DP link training regressions he's seen. - intel-gfx is no longer subscribers-only (well, just no longer moderated in an annoying way for non-subscribers), update MAINTAINERS - gm45 gmbus irq fallout fix (Jiri Kosina) * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: stop using GMBUS IRQs on Gen4 chips MAINTAINERS: intel-gfx is no longer subscribers-only drm/i915: Use the fixed pixel clock for eDP in intel_dp_set_m_n() Revert "drm/i915: try to train DP even harder" drm/i915: bounds check execbuffer relocation count drm/i915: restrict kernel address leak in debugfs
2013-03-21drm/mgag200: Bug fix: Modified pll algorithm for EH projectJulia Lemire1-5/+5
While testing the mgag200 kms driver on the HP ProLiant Gen8, a bug was seen. Once the bootloader would load the selected kernel, the screen would go black. At first it was assumed that the mgag200 kms driver was hanging. But after setting up the grub serial output, it was seen that the driver was being loaded properly. After trying serval monitors, one finaly displayed the message "Frequency Out of Range". By comparing the kms pll algorithm with the previous mgag200 xorg driver pll algorithm, discrepencies were found. Once the kms pll algorithm was modified, the expected pll values were produced. This fix was tested on several monitors of varying native resolutions. Signed-off-by: Julia Lemire <jlemire@matrox.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-03-20Merge branch 'drm-fixes-3.9' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie3-17/+38
into drm-next Alex writes: "Mostly just small bug fixes. Big change is new pci ids for Richland APUs." * 'drm-fixes-3.9' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: add Richland pci ids drm/radeon: add support for Richland APUs drm/radeon/benchmark: allow same domains for dma copy drm/radeon/benchmark: make sure bo blit copy exists before using it drm/radeon: fix backend map setup on 1 RB trinity boards drm/radeon: fix S/R on VM systems (cayman/TN/SI)
2013-03-20Merge branch 'drm-nouveau-fixes-3.9' of ↵Dave Airlie9-60/+117
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next Lots of thermal fixes and fix a lockdep warning we've been seeing. * 'drm-nouveau-fixes-3.9' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nv50/kms: prevent lockdep false-positive in page flipping path drm/nouveau/core: fix return value of nouveau_object_del() drm/nouveau/hwmon: do not expose a buggy temperature if it is unavailable drm/nouveau/therm: display the availability of the internal sensor drm/nouveau/therm: disable temperature management if the sensor isn't readable drm/nouveau/therm: disable auto fan management if temperature is not available drm/nv40/therm: reserve negative temperatures for errors drm/nv40/therm: disable temperature reading if the bios misses some parameters drm/nouveau/therm-ic: the temperature is off by sensor_constant, warn the user drm/nouveau/therm: remove some confusion introduced by therm_mode drm/nouveau/therm: do not make assumptions on temperature drm/nv40/therm: increase the sensor's settling delay to 20ms drm/nv40/therm: improve selection between the old and the new style
2013-03-20drm/i915: stop using GMBUS IRQs on Gen4 chipsJiri Kosina1-1/+10
Commit 28c70f162 ("drm/i915: use the gmbus irq for waits") switched to using GMBUS irqs instead of GPIO bit-banging for chipset generations 4 and above. It turns out though that on many systems this leads to spurious interrupts being generated, long after the register write to disable the IRQs has been issued. Typically this results in the spurious interrupt source getting disabled: [ 9.636345] irq 16: nobody cared (try booting with the "irqpoll" option) [ 9.637915] Pid: 4157, comm: ifup Tainted: GF 3.9.0-rc2-00341-g0863702 #422 [ 9.639484] Call Trace: [ 9.640731] <IRQ> [<ffffffff8109b40d>] __report_bad_irq+0x1d/0xc7 [ 9.640731] [<ffffffff8109b7db>] note_interrupt+0x15b/0x1e8 [ 9.640731] [<ffffffff810999f7>] handle_irq_event_percpu+0x1bf/0x214 [ 9.640731] [<ffffffff81099a88>] handle_irq_event+0x3c/0x5c [ 9.640731] [<ffffffff8109c139>] handle_fasteoi_irq+0x7a/0xb0 [ 9.640731] [<ffffffff8100400e>] handle_irq+0x1a/0x24 [ 9.640731] [<ffffffff81003d17>] do_IRQ+0x48/0xaf [ 9.640731] [<ffffffff8142f1ea>] common_interrupt+0x6a/0x6a [ 9.640731] <EOI> [<ffffffff8142f952>] ? system_call_fastpath+0x16/0x1b [ 9.640731] handlers: [ 9.640731] [<ffffffffa000d771>] usb_hcd_irq [usbcore] [ 9.640731] [<ffffffffa0306189>] yenta_interrupt [yenta_socket] [ 9.640731] Disabling IRQ #16 The really curious thing is now that irq 16 is _not_ the interrupt for the i915 driver when using MSI, but it _is_ the interrupt when not using MSI. So by all indications it seems like gmbus is able to generate a legacy (shared) interrupt in MSI mode on some configurations. I've tried to reproduce this and the differentiating thing seems to be that on unaffected systems no other device uses irq 16 (which seems to be the non-MSI intel gfx interrupt on all gm45). I have no idea how that even can happen. To avoid tempting this elephant into a rage, just disable gmbus interrupt support on gen 4. v2: Improve the commit message with exact details of what's going on. Also add a comment in the code to warn against this particular elephant in the room. v3: Move the comment explaing how gen4 blows up next to the definition of HAS_GMBUS_IRQ to keep the code-flow straight. Suggested by Chris Wilson. Signed-off-by: Jiri Kosina <jkosina@suse.cz> (v1) Acked-by: Chris Wilson <chris@chris-wilson.co.uk> References: https://lkml.org/lkml/2013/3/8/325 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-19drm/nv50/kms: prevent lockdep false-positive in page flipping pathBen Skeggs1-2/+2
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-19drm/nouveau/core: fix return value of nouveau_object_del()Ben Skeggs1-2/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-18drm/i915: Use the fixed pixel clock for eDP in intel_dp_set_m_n()Takashi Iwai1-1/+11
The eDP output on HP Z1 is still broken when X is started even after fixing the infinite link-train loop. The regression was introduced in 3.6 kernel for cleaning up the mode clock handling code in intel_dp.c by the commit [71244653: drm/i915: adjusted_mode->clock in the dp mode_fix]. In the past, the clock of the reference mode was modified in intel_dp_mode_fixup() in the case of eDP fixed clock, and this clock was used for calculating in intel_dp_set_m_n(). This override was removed, thus the wrong mode clock is used for the calculation, resulting in a psychedelic smoking output in the end. This patch corrects the clock to be used in the place. v1->v2: Use intel_edp_target_clock() for checking eDP fixed clock instead of open code as in ironlake_set_m_n(). Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-18drm/nouveau/hwmon: do not expose a buggy temperature if it is unavailableMartin Peres1-13/+31
Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-18drm/nouveau/therm: display the availability of the internal sensorMartin Peres3-0/+13
Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-18drm/nouveau/therm: disable temperature management if the sensor isn't readableMartin Peres1-1/+1
Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-18drm/nouveau/therm: disable auto fan management if temperature is not availableMartin Peres1-0/+5
Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-18drm/nv40/therm: reserve negative temperatures for errorsMartin Peres1-0/+4
Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-18drm/nv40/therm: disable temperature reading if the bios misses some parametersMartin Peres2-15/+4
Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-18drm/nouveau/therm-ic: the temperature is off by sensor_constant, warn the userMartin Peres2-3/+5
Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-18drm/nouveau/therm: remove some confusion introduced by therm_modeMartin Peres4-8/+8
The kernel message "[ PTHERM][0000:01:00.0] Thermal management: disabled" is misleading as it actually means "fan management: disabled". This patch fixes both the source and the message to improve readability. Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-18drm/nouveau/therm: do not make assumptions on temperatureMartin Peres1-3/+3
In nouveau_therm_sensor_event, temperature is stored as an uint8_t even though the original interface returns an int. This change should make it more obvious when the sensor is either very-ill-calibrated or when we selected the wrong sensor style on the nv40 family. Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-18drm/nv40/therm: increase the sensor's settling delay to 20msMartin Peres1-1/+2
Based on my experience, 10ms wasn't always enough. Let's bump that to a little more. If this turns out to be insufficient-enough again, then an approach based on letting the sensor settle for several seconds before starting polling on the temperature would be better suited. This way, boot time wouldn't be impacted by those waits too much. Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-18drm/nv40/therm: improve selection between the old and the new styleMartin Peres1-12/+38
The condition to select between the old and new style was a thinko as rnndb orders chipsets based on their release date (or general chronologie hw-wise) and not based on their chipset number. As the nv40 family is a mess when it comes to numbers, this patch introduces a switch-based selection between the old and new style. Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-17Revert "drm/i915: try to train DP even harder"Takashi Iwai1-1/+1
This reverts commit 0d71068835e2610576d369d6d4cbf90e0f802a71. Not only that the commit introduces a bogus check (voltage_tries == 5 will never meet at the inserted code path), it brings the i915 driver into an endless dp-train loop on HP Z1 desktop machine with IVY+eDP. At least reverting this commit recovers the framebuffer (but X is still broken by other reasons...) Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-15drm/radeon: add support for Richland APUsAlex Deucher1-1/+10
Richland APUs are a new version of the Trinity APUs with performance and power management improvements. Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-03-15drm/radeon/benchmark: allow same domains for dma copyAlex Deucher1-4/+1
Remove old comment and allow benchmarking moves within the same memory domain for both dma and blit methods. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-03-15drm/radeon/benchmark: make sure bo blit copy exists before using itAlex Deucher1-7/+9
Fixes a segfault on asics without a blit callback. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=62239 Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-03-15drm/radeon: fix backend map setup on 1 RB trinity boardsAlex Deucher1-5/+16
Need to adjust the backend map depending on which RB is enabled. This is the trinity equivalent of: f7eb97300832f4fe5fe916c5d84cd2e25169330e May fix: https://bugs.freedesktop.org/show_bug.cgi?id=57919 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-03-15drm/radeon: fix S/R on VM systems (cayman/TN/SI)Alex Deucher2-0/+2
We weren't properly tearing down the VM sub-alloctor on suspend leading to bogus VM PTs on resume. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=60439 Reviewed-by: Christian König <christian.koenig@amd.com> Tested-by: Dmitry Cherkasov <Dmitrii.Cherkasov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-03-13drm/i915: bounds check execbuffer relocation countKees Cook1-3/+8
It is possible to wrap the counter used to allocate the buffer for relocation copies. This could lead to heap writing overflows. CVE-2013-0913 v3: collapse test, improve comment v2: move check into validate_exec_list Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Pinkie Pie Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-13drm/i915: restrict kernel address leak in debugfsKees Cook1-1/+1
Masks kernel address info-leak in object dumps with the %pK suffix, so they cannot be used to target kernel memory corruption attacks if the kptr_restrict sysctl is set. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-11Merge branch 'drm-nouveau-fixes-3.9' of ↵Dave Airlie4-4/+10
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next Regression fixes and oops fixes for nouveau. * 'drm-nouveau-fixes-3.9' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nv50: use correct tiling methods for m2mf buffer moves drm/nouveau: idle channel before releasing notify object drm/nouveau: fix regression in vblanking drm/nv50: encoder creation failure doesn't mean full init failure
2013-03-11drm/nv50: use correct tiling methods for m2mf buffer movesMarcin Slusarz1-2/+2
Currently used only on original nv50, nvaa and nvac. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-11drm/nouveau: idle channel before releasing notify objectMarcin Slusarz1-0/+5
Unmapping it while it's still in use (e.g. by M2MF) can lead to page faults and a lot of TRAP_M2MF spam in dmesg. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-11drm/nouveau: fix regression in vblankingMaarten Lankhorst1-2/+2
nv50_vblank_enable/disable got switched from NV50_PDISPLAY_INTR_EN_1_VBLANK_CRTC_0 (4) << head to 1 << head, which is wrong. 4 << head is the correct value. Fixes regression with vblanking since 1d7c71a3e2f77 "drm/nouveau/disp: port vblank handling to event interface" Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-11drm/nv50: encoder creation failure doesn't mean full init failureBen Skeggs1-0/+1
It's meant as a notification only, not a fatal error. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-08drm/tegra: drop "select DRM_HDMI"Paul Bolle1-1/+0
Commit ac24c2204a76e5b42aa103bf963ae0eda1b827f3 ("drm/tegra: Use generic HDMI infoframe helpers") added "select DRM_HDMI" to the DRM_TEGRA Kconfig entry. But there is no Kconfig symbol named DRM_HDMI. The select statement for that symbol is a nop. Drop it. What was needed to use HDMI functionality was to select HDMI (which this entry already did through depending on DRM) and to include linux/hdmi.h (which this commit also did). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-03-08drm/mgag200: Bug fix: Renesas board now selects native resolution.Julia Lemire1-0/+1
Renesas boards were consistently defaulting to the 1024x768 resolution, regardless of the native resolution of the monitor plugged in. It was determined that the EDID of the monitor was not being read. Since the DAC is a shared line, in order to read from or write to it we must take control of the DAC clock. This can be done by setting the proper register to one. This bug fix sets the register MGA1064_GEN_IO_CTL2 to one. The DAC control line can be used to determine whether or not a new monitor has been plugged in. But since the hotplug feature is not one we will support, it has been decided to simply leave the register set to one. Signed-off-by: Julia Lemire <jlemire@matrox.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-03-08drm/mgag200: Reject modes that are too big for VRAMChristopher Harvey1-0/+27
A monitor or a user could request a resolution greater than the available VRAM for the backing framebuffer. This change checks the required framebuffer size against the max VRAM size and rejects modes if they are too big. This change can also remove a mode request passed in via the video= parameter. Signed-off-by: Christopher Harvey <charvey@matrox.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-03-08drm/mgag200: 'fbdev_list' in 'struct mga_fbdev' is not usedChristopher Harvey1-1/+0
Signed-off-by: Christopher Harvey <charvey@matrox.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-03-07drm/radeon: don't check mipmap alignment if MIP_ADDRESS is FMASKMarek Olšák2-2/+3
The MIP_ADDRESS state has 2 meanings. If the texture has one sample per pixel, it's a pointer to the mipmap chain. If the texture has multiple samples per pixel, it's a pointer to FMASK, a metadata buffer needed for reading compressed MSAA textures. The mipmap alignment rules do not apply to FMASK. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-03-07drm/radeon: skip MC reset as it's probably not hungAlex Deucher4-0/+24
The MC is mostly likely busy (e.g., display requests), not hung so no need to reset it. Doing an MC reset is tricky and not particularly reliable. Fixes hangs in certain cases. Reported-by: Josh Boyer <jwboyer@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-03-07drm/radeon: add primary dac adj quirk for R200 boardAlex Deucher1-0/+9
vbios values are wrong leading to colors that are too bright. Use the default values instead. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-03-07drm/radeon: don't set hpd, afmt interrupts when interrupts are disabledAlex Deucher1-0/+12
Avoids splatter if the interrupt handler is not registered due to acceleration being disabled. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org
2013-03-07Merge branch 'drm-intel-fixes' of ↵Dave Airlie8-22/+79
git://people.freedesktop.org/~danvet/drm-intel into drm-next A bunch of fixes, nothing truely horrible: - Fix PCH irq handling race which resulted in missed gmbus/dp aux irqs and subsequent fallout (Paulo) - Fixup off-by-one in our hsw id table (Kenneth) - Fixup ilk rc6 support (disabled by default), regression introduced in 3.8 - g4x plane w/a from Egbert Eich - gen2/3/4 dpms suspend/standy fixes for VGA outputs from Patrik Jakobsson - Workaround dying ivb machines with less aggressive rc6 values (Stéphane Marchesin) * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Turn off hsync and vsync on ADPA when disabling crt drm/i915: Fix incorrect definition of ADPA HSYNC and VSYNC bits drm/i915: also disable south interrupts when handling them drm/i915: enable irqs earlier when resuming drm/i915: Increase the RC6p threshold. DRM/i915: On G45 enable cursor plane briefly after enabling the display plane. drm/i915: Fix Haswell/CRW PCI IDs. drm/i915: Don't clobber crtc->fb when queue_flip fails drm/i915: wait_event_timeout's timeout is in jiffies drm/i915: Fix missing variable initilization
2013-03-06drm/i915: Turn off hsync and vsync on ADPA when disabling crtPatrik Jakobsson1-1/+1
According to PRM we need to disable hsync and vsync even though ADPA is disabled. The previous code did infact do the opposite so we fix it. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56359 Tested-by: max <manikulin@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-06drm/i915: Fix incorrect definition of ADPA HSYNC and VSYNC bitsPatrik Jakobsson1-2/+2
Disable bits for ADPA HSYNC and VSYNC where mixed up resulting in suspend becoming standby and vice versa. Fixed by swapping their bit position. Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-05drm/i915: also disable south interrupts when handling themPaulo Zanoni1-2/+24
From the docs: "IIR can queue up to two interrupt events. When the IIR is cleared, it will set itself again after one clock if a second event was stored." "Only the rising edge of the PCH Display interrupt will cause the North Display IIR (DEIIR) PCH Display Interrupt even bit to be set, so all PCH Display Interrupts, including back to back interrupts, must be cleared before a new PCH Display interrupt can cause DEIIR to be set". The current code works fine because we don't get many interrupts, but if we enable the PCH FIFO underrun interrupts we'll start getting so many interrupts that at some point new PCH interrupts won't cause DEIIR to be set. The initial implementation I tried was to turn the code that checks SDEIIR into a loop, but we can still get interrupts even after the loop is done (and before the irq handler finishes), so we have to either disable the interrupts or mask them. In the end I concluded that just disabling the PCH interrupts is enough, you don't even need the loop, so this is what this patch implements. I've tested it and it passes the 2 "PCH FIFO underrun interrupt storms" I can reproduce: the "ironlake_crtc_disable" case and the "wrong watermarks" case. In other words, here's how to reproduce the problem fixed by this patch: 1 - Enable PCH FIFO underrun interrupts (SERR_INT on SNB+) 2 - Boot the machine 3 - While booting we'll get tons of PCH FIFO underrun interrupts 4 - Plug a new monitor 5 - Run xrandr, notice it won't detect the new monitor 6 - Read SDEIIR and notice it's not 0 while DEIIR is 0 Q: Can't we just clear DEIIR before SDEIIR? A: It doesn't work. SDEIIR has to be completely cleared (including the interrupts stored on its back queue) before it can flip DEIIR's bit to 1 again, and even while you're clearing it you'll be getting more and more interrupts. Q: Why does it work by just disabling+enabling the south interrupts? A: Because when we re-enable them, if there's something on the SDEIIR register (maybe an interrupt stored on the queue), the re-enabling will make DEIIR's bit flip to 1, and since we'll already have interrupts enabled we'll get another interrupt, then run our irq handler again to process the "back" interrupts. v2: Even bigger commit message, added code comments. Note that this fixes missed dp aux irqs which have been reported for 3.9-rc1. This regression has been introduced by switching to irq-driven dp aux transactions with commit 9ee32fea5fe810ec06af3a15e4c65478de56d4f5 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 13:53:48 2012 +0100 drm/i915: irq-drive the dp aux communication References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg18588.html References: https://lkml.org/lkml/2013/2/26/769 Tested-by: Imre Deak <imre.deak@intel.com> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Pimp commit message with references for the dp aux irq timeout regression this fixes.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-05drm/i915: enable irqs earlier when resumingDaniel Vetter1-1/+12
We need it to restore the ilk rc6 context, since the gpu wait no requires interrupts. But in general having interrupts around should help in code sanity, since more and more stuff is interrupt driven. This regression has been introduced in commit 3e9605018ab3e333d51cc90fccfde2031886763b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Nov 27 16:22:54 2012 +0000 drm/i915: Rearrange code to only have a single method for waiting upon the ring Like in the driver load code we need to make sure that hotplug interrupts don't cause havoc with our modeset state, hence block them with the existing infrastructure. Again we ignore races where we might loose hotplug interrupts ... Note that the driver load part of the regression has already been fixed in commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup v2: Add a note to the commit message about which patch fixed the driver load part of the regression. Stable kernels need to backport both patches. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54691 Cc: stable@vger.kernel.org (for 3.8 only, plese backport 52d7ecedac3f96fb5 first) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reported-and-Tested-by: Ilya Tumaykin <itumaykin@gmail.com> Reviewed-by: Chris wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-05drm/i915: Increase the RC6p threshold.Stéphane Marchesin1-1/+1
This increases GEN6_RC6p_THRESHOLD from 100000 to 150000. For some reason this avoids the gen6_gt_check_fifodbg.isra warnings and associated GPU lockups, which makes my ivy bridge machine stable. Signed-off-by: Stéphane Marchesin <marcheu@chromium.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-04DRM/i915: On G45 enable cursor plane briefly after enabling the display plane.Egbert Eich1-0/+26
On G45 some low res modes (800x600 and 1024x768) produce a blank screen when the display plane is enabled with with cursor plane off. Experiments showed that this issue occurred when the following conditions were met: a. a previous mode had the cursor plane enabled (Xserver). b. this mode or the previous one was using self refresh. (Thus the problem was only seen with low res modes). The screens lit up as soon as the cursor plane got enabled. Therefore the blank screen occurred only in console mode, not when running an Xserver. It also seemed to be necessary to disable self refresh while briefly enabling the cursor plane. Signed-off-by: Egbert Eich <eich@suse.com> Bugzilla: https://bugs.freedesktop.org/attachment.cgi?bugid=61457 Acked-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: drop spurious whitespace change.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-04drm/nv50-: prevent some races between modesetting and page flippingBen Skeggs1-83/+106
nexuiz-glx + gnome-shell is able to trigger this a lot of the time. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 22:21:17 +0000