summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2011-08-05Revert "drm/i915: Try enabling RC6 by default (again)"Dave Airlie1-1/+1
This reverts commit 4e20fa65a3ea789510eed1a15deb9e8aab2b8202. Francesco Allertsen still has a broken configuration. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/radeon: Extended DDC Probing for ECS A740GM-M DVI-D ConnectorThomas Reim1-0/+9
ECS A740GM-M with ATI RADEON 2100 sends data to i2c bus for a DVI connector that is not implemented/existent on the board. Fix by applying extented DDC probing for this connector. Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC Lines Tested for kernel 2.6.38 on Asus ECS A740GM-M board BugLink: http://bugs.launchpad.net/bugs/810926 Cc: <stable@kernel.org> Signed-off-by: Thomas Reim <reimth@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/radeon: Log Subsystem Vendor and Device InformationThomas Reim1-2/+3
Log PCI subsystem vendor and subsystem device ID in addition to PCI vendor and device ID during kernel mode initialisation. This helps to better identify radeon devices of third-party vendors, e. g. for bug analysis. Tested for kernel 2.6.35, 2.6.38 and 3.0 on Asus M2A-VM HDMI board Cc: <stable@kernel.org> Signed-off-by: Thomas Reim <reimth@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC ↵Thomas Reim4-12/+80
Lines (here: Asus M2A-VM HDMI) Some integrated ATI Radeon chipset implementations with add-on HDMI card (e. g. Asus M2A-VM HDMI) indicate the availability of a DDC even when the add-on card is not plugged in or HDMI is disabled in BIOS setup. In this case, drm_get_edid() and drm_edid_block_valid() periodically dump data and kernel errors into system log files and onto terminals. For these connectors DDC probing is extended by a check for a correct EDID header. Only in case a valid EDID header is also found, the (HDMI or DVI) connector will be used by the Radeon driver. This prevents the kernel driver from useless flooding of logs and terminal sessions with EDID dumps and error messages. This patch adds a flag 'requires_extended_probe' to the radeon_connector structure. In function radeon_connector_needs_extended_probe() this flag can be set on a chipset family/vendor/connector type specific basis. In addition, function radeon_ddc_probe() has been adapted to perform extended DDC probing if required by the connector's flag. Requires function drm_edid_header_is_valid() in DRM module provided by [PATCH] drm: Separate EDID Header Check from EDID Block Check. Tested for kernel 2.6.35, 2.6.38 and 3.0 on Asus M2A-VM HDMI board BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=668196 BugLink: http://bugs.launchpad.net/bugs/7228066 Cc: <stable@kernel.org> Signed-off-by: Thomas Reim <reimth@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm: Separate EDID Header Check from EDID Block CheckThomas Reim1-6/+18
Provides function drm_edid_header_is_valid() for EDID header check and replaces EDID header check part of function drm_edid_block_valid() by a call of drm_edid_header_is_valid(). This is a prerequisite to extend DDC probing, e. g. in function radeon_ddc_probe() for Radeon devices, by a central EDID header check. Tested for kernel 2.6.35, 2.6.38 and 3.0 Cc: <stable@kernel.org> Signed-off-by: Thomas Reim <reimth@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm: Add NULL check about irq functionsJoonyoung Shim1-8/+15
The struct drm_driver has some function pointers for irq. They are gpu specific and some functions aren't essential things. This can prevents creation of unnecessary dummy function for irq. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm: Fix irq install error handlingJoonyoung Shim1-0/+3
The registered irq should be unregistered by free_irq() if irq_postinstall() returns the error after request_irq() is called successfully. [airlied: add vga switcheroo disable] Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/radeon: fix potential NULL dereference in drivers/gpu/drm/radeon/atom.cBojan Prtvar1-0/+3
kzalloc() can return NULL, so I added check for it Signed-off-by: Bojan Prtvar <prtvar.b@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/radeon: clean reg header filesFernando Luis Vázquez Cao1-0/+1
Reg header files are generated so they are not cleaned automagically. They need to be added to the clean-files list. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/debugfs: Initialise empty variableEmil Velikov1-1/+3
[airlied: move char declaration] Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04Merge branch 'drm-intel-next' of ↵Dave Airlie16-104/+591
ssh://master.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 into drm-fixes * 'drm-intel-next' of ssh://master.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: (42 commits) drm/i915: allow cache sharing policy control drm/i915/hdmi: HDMI source product description infoframe support drm/i915/hdmi: split infoframe setting from infoframe type code drm: track CEA version number if present drm/i915: Try enabling RC6 by default (again) Revert "drm/i915/dp: Zero the DPCD data before connection probe" drm/i915/dp: wait for previous AUX channel activity to clear drm/i915: don't use uninitialized EDID bpc values when picking pipe bpp drm/i915/pch: Save/restore PCH_PORT_HOTPLUG across suspend drm/i915: apply phase pointer override on SNB+ too drm/i915: Add quirk to disable SSC on Sony Vaio Y2 drm/i915: provide more error output when mode sets fail drm/i915: add GPU max frequency control file i915: add Dell OptiPlex FX170 to intel_no_lvds drm/i915: Ignore GPU wedged errors while pinning scanout buffers drm/i915/hdmi: send AVI info frames on ILK+ as well drm/i915: fix CB tuning check for ILK+ drm/i915: Flush other plane register writes drm/i915: flush plane control changes on ILK+ as well drm/i915: apply timing generator bug workaround on CPT and PPT ...
2011-08-04drm/radeon/kms: add thermal chip quirk for asus 9600xtAlex Deucher1-1/+20
The board has an lm63 compatible thermal chip, but no thermal chip entry in the vbios tables. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=39513 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/radeon: off by one in check_reg() functionsDan Carpenter2-3/+2
This off by one range check was copy and pasted a couple places. It's not really harmful, but we should fix it anyway. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/radeon/kms: fix version comment due to merge timingAlex Deucher1-2/+2
Compute cs support was actually added in 2.11.0 rather than 2.10.0, but the patch was written prior. Update comment to match. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-03drm/i915: allow cache sharing policy controlJesse Barnes2-0/+107
Expose the SNB+ cache sharing policy register in debugfs. The new file, i915_cache_sharing, has 4 values, 0-3, with 0 being "max uncore resources" and 3 being the minimum. Exposing this control should make benchmarking easier and help us choose a good default. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-03drm/i915/hdmi: HDMI source product description infoframe supportJesse Barnes2-0/+37
Set an SPD infoframe if the sink supports it. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-03drm/i915/hdmi: split infoframe setting from infoframe type codeJesse Barnes3-46/+106
This makes it easier to add support for other infoframes (e.g. SPD, vendor specific). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-03drm: track CEA version number if presentJesse Barnes1-0/+9
Drivers need to know the CEA version number in addition to other display info (like whether the display is an HDMI sink) before enabling certain features. So track the CEA version number in the display info structure. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-03drm/i915: Try enabling RC6 by default (again)Keith Packard1-1/+1
Jesse Barnes and I found a couple of issues where incorrect mode setting would cause problems with RC6 enabled. We're hopeful that fixing those will resolve the outstanding issues with a few machines that had trouble before 3.0 with rc6. Cc: Pekka Enberg <penberg@kernel.org> Cc: Francesco Allertsen <fallertsen@gmail.com> Cc: Ted Phelps <phelps@gnusto.com> Cc: Gu Rui <chaos.proton@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38567 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=38332 Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-03Merge branch 'drm-intel-fixes' into drm-intel-nextKeith Packard1-4/+11
2011-08-03Revert "drm/i915/dp: Zero the DPCD data before connection probe"Keith Packard1-1/+0
This reverts commit 97cdd7101079adc3c626d159c62d43de949516c8. Clearing the dpcd data means that if the fetch fails, any previous data will be lost. On eDP, this is no fun as we only fetch dpcd at init time, so the memset will destroy that the next time through.
2011-08-01drm/i915/dp: wait for previous AUX channel activity to clearJesse Barnes1-3/+11
Before initiating a new read or write on the DP AUX channel, wait for any outstanding activity to complete. This may happen during normal retry behavior. If the wait fails (i.e. after 1ms the AUX channel is still busy) dump a backtrace to make the caller easier to spot. v2: use msleep instead, and timeout after 3ms (only ever saw 1 retry with msleep in testing) v3: fix backtrace check to trigger if the 3ms wait times out Fixes https://bugs.freedesktop.org/show_bug.cgi?id=38136. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-01drm/i915: don't use uninitialized EDID bpc values when picking pipe bppJesse Barnes1-2/+5
The EDID parser will zero out the bpc value, and the driver needs to handle that case. In our picker, we'll just ignore 0 values as far as bpp picking goes. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=39323. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-29Merge branch 'drm-intel-fixes' into drm-intel-nextKeith Packard7-2/+193
2011-07-29drm/i915/pch: Save/restore PCH_PORT_HOTPLUG across suspendAdam Jackson2-0/+3
At least on a Lenovo X220 the HPD bits of this are enabled at boot but cleared after resume, which means plug interrupts stop working. This also happens to fix DP displays re-lighting on resume. I'm quite certain that's an accident: the first DP link train inevitably fails on that machine, and it's only serendipity that we're getting multiple plug interrupts and the second train works. But I shall take my victories where I get them. Signed-off-by: Adam Jackson <ajax@redhat.com> Tested-by: Keith Packard <keithp@keithp.com> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-29drm/i915: apply phase pointer override on SNB+ tooJesse Barnes2-0/+36
These bits moved around on SNB and above. v2: again with the git send-email fail v3: add macros for getting per-pipe override & enable bits v4: enable phase sync pointer on SNB and IVB configs as well Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-29drm/i915: Add quirk to disable SSC on Sony Vaio Y2Michel Alexandre Salim1-0/+3
Using the new quirk added to support disabling SSC on Lenovo U160 (#36656, commit 435793dfb8aec7b2e19f72d5bce8a22fd0b57839), also register the Vaio as a special case and disable SSC for it. This patch fixes #34437 on fdo bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34437 Signed-off-by: Michel Alexandre Salim <salimma@fedoraproject.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-29drm/i915: provide more error output when mode sets failJesse Barnes1-1/+4
If a mode set fails we may get a message from drm_crtc_helper if we're lucky, but it won't tell us anything about *why* we failed to set a mode. So add a few DRM_ERRORs for the cases that shouldn't happen so we can debug things more easily. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-29drm/i915: add GPU max frequency control fileJesse Barnes1-0/+90
Mainly for use in debugging and benchmarking, this file allows the user to control the max frequency used by the GPU. Frequency may still vary based on workload (if the frequency is set to higher than the minimum) but won't go over the newly set value. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-29i915: add Dell OptiPlex FX170 to intel_no_lvdsPieterjan Camerlynck1-0/+8
The Dell OptiPlex FX170 claims to have LVDS, but doesn't. Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-29drm/i915: Ignore GPU wedged errors while pinning scanout buffersKeith Packard1-1/+1
Failing to pin a scanout buffer will most likely lead to a black screen, so if the GPU is wedged, then just let the pin happen and hope that things work out OK. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-07-29drm/i915/hdmi: send AVI info frames on ILK+ as wellJesse Barnes2-1/+52
On Ironlake and above, we have per-transcoder DIP registers, so use them for sending DIPs like AVI infoframes on ILK and above. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-28drm/i915: fix CB tuning check for ILK+Jesse Barnes1-1/+1
CB tuning is needed to handle potential process variations that might cause clock jitter for certain PLL settings. However, we were setting it incorrectly since we were using the wrong M value as a check (M1 when we needed to use the whole M value). Fix it up, making my HDMI attached display a little prettier (used to have occasional dots crawl across the display). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-28Merge branch 'drm-intel-fixes' into drm-intel-nextKeith Packard4-51/+98
2011-07-28drm/i915: Flush other plane register writesKeith Packard1-13/+18
Writes to the plane control register are buffered in the chip until a write to the DSPADDR (pre-965) or DSPSURF (post-965) register occurs. This patch adds flushes in: intel_enable_plane gen6_init_clock_gating ivybridge_init_clock_gating Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-28drm/i915: flush plane control changes on ILK+ as wellJesse Barnes1-2/+2
After writing to the plane control reg we need to write to the surface reg to trigger the double buffered register latch. On previous chipsets, writing to DSPADDR was enough, but on ILK+ DSPSURF is the reg that triggers the double buffer latch. v2: write DSPADDR too to cover pre-965 chipsets v3: use flush_display_plane instead, that's what it's for v4: send the right patch Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Keith Packard <keithp@keithp.com> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-28drm/i915: apply timing generator bug workaround on CPT and PPTJesse Barnes2-0/+9
On CougarPoint and PantherPoint PCH chips, the timing generator may fail to start after DP training completes. This is due to a bug in the FDI autotraining detect logic (which will stall the timing generator and re-enable it once training completes), so disable it to avoid silent DP mode setting failures. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-28drm/i915: Set crtc DPMS mode to ON in intel_crtc_mode_setKeith Packard1-0/+2
This corrects the DPMS mode tracking so that the DPMS code will actually turn the CRTC off the next time the screen saves. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-07-28Revert and fix "drm/i915/dp: remove DPMS mode tracking from DP"Keith Packard1-0/+8
This reverts commit 885a50147f00a8a80108904bf58a18af357717f3. We actually *do* need to track DPMS state so that on hotplug, we don't retrain the link until DPMS is disabled. However, that code had avery small bug -- it wouldn't set the dpms_mode at mode set time, and so link retraining would not actually occur on monitor hotplug until the monitor had gone through a DPMS off/DPMS on cycle. Signed-off-by: Keith Packard <keithp@keithp.com> Tested-by: Andrew Lutomirski <luto@mit.edu>
2011-07-28drm/i915: DP_PIPE_ENABLED must check transcoder on CPTKeith Packard2-14/+34
Display port pipe selection on CPT is not done with a bit in the output register, rather it is controlled by a couple of bits in the separate transcoder register which indicate which display port output is connected to the transcoder. This patch replaces the simplistic macro DP_PIPE_ENABLED with the rather more complicated function dp_pipe_enabled which checks the output register to see if that is enabled, and then goes on to either check the output register pipe selection bit (on non-CPT) or the transcoder DP selection bits (on CPT). Before this patch, any time the mode of pipe A was changed, any display port outputs on pipe B would get disabled as intel_disable_pch_ports would ensure that the mode setting operation could occur on pipe A without interference from other outputs connected to that pch port Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Adam Jackson <ajax@redhat.com>
2011-07-28drm/i915: In intel_dp_init, replace read of DPCD with intel_dp_get_dpcdKeith Packard1-5/+3
Eliminates an open-coded read and also gains the retry behaviour of intel_dp_get_dpcd, which seems like a good idea. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Adam Jackson <ajax@redhat.com>
2011-07-28drm/i915: Rename i915_dp_detect_common to intel_dp_get_dpcdKeith Packard1-9/+15
This describes the function better, allowing it to be used where the DPCD value is relevant. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Adam Jackson <ajax@redhat.com>
2011-07-28drm/i915: Use dp_detect_common in hotplug helper functionKeith Packard1-20/+19
This uses the common dpcd reading routine, i915_dp_detect_common, instead of open-coding a call to intel_dp_aux_native_read. Besides reducing duplicated code, this also gains the read retries which may be necessary when a cable is first plugged back in and the link needs to be retrained. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Adam Jackson <ajax@redhat.com>
2011-07-28drm/i915: Fixup for 'Hold mode_config->mutex during hotplug'Keith Packard1-2/+2
drm_helper_hpd_irq_event queues another work proc to go and deliver the user-space event, and that function also wants to hold the config mutex, so we shouldn't hold the mutex across the drm_helper_hpd_irq_event call. Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma6-6/+6
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26Merge branch 'drm-core-next' of ↵Linus Torvalds104-1417/+5532
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (135 commits) drm/radeon/kms: fix DP training for DPEncoderService revision bigger than 1.1 drm/radeon/kms: add missing vddci setting on NI+ drm/radeon: Add a rmb() in IH processing drm/radeon: ATOM Endian fix for atombios_crtc_program_pll() drm/radeon: Fix the definition of RADEON_BUF_SWAP_32BIT drm/radeon: Do an MMIO read on interrupts when not uisng MSIs drm/radeon: Writeback endian fixes drm/radeon: Remove a bunch of useless _iomem casts drm/gem: add support for private objects DRM: clean up and document parsing of video= parameter DRM: Radeon: Fix section mismatch. drm: really make debug levels match in edid failure code drm/radeon/kms: fix i2c map for rv250/280 drm/nouveau/gr: disable fifo access and idle before suspend ctx unload drm/nouveau: pass flag to engine fini() method on suspend drm/nouveau: replace nv04_graph_fifo_access() use with direct reg bashing drm/nv40/gr: rewrite/split context takedown functions drm/nouveau: detect disabled device in irq handler and return IRQ_NONE drm/nouveau: ignore connector type when deciding digital/analog on DVI-I drm/nouveau: Add a quirk for Gigabyte NX86T ...
2011-07-26drm/radeon/kms: fix DP training for DPEncoderService revision bigger than 1.1Jerome Glisse1-4/+18
DPEncoderService newer than 1.1 can't properly program the DP (display port) link training. When facing such version use the DIGxEncoderControl method instead. Fix DP link training on some R7XX. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-26drm/radeon/kms: add missing vddci setting on NI+Alex Deucher1-0/+3
Need to add vddci setting to pm init as well as resume. Fixes hangs on load on some boards. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=38754 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-25Merge 'akpm' patch seriesLinus Torvalds5-18/+9
* Merge akpm patch series: (122 commits) drivers/connector/cn_proc.c: remove unused local Documentation/SubmitChecklist: add RCU debug config options reiserfs: use hweight_long() reiserfs: use proper little-endian bitops pnpacpi: register disabled resources drivers/rtc/rtc-tegra.c: properly initialize spinlock drivers/rtc/rtc-twl.c: check return value of twl_rtc_write_u8() in twl_rtc_set_time() drivers/rtc: add support for Qualcomm PMIC8xxx RTC drivers/rtc/rtc-s3c.c: support clock gating drivers/rtc/rtc-mpc5121.c: add support for RTC on MPC5200 init: skip calibration delay if previously done misc/eeprom: add eeprom access driver for digsy_mtc board misc/eeprom: add driver for microwire 93xx46 EEPROMs checkpatch.pl: update $logFunctions checkpatch: make utf-8 test --strict checkpatch.pl: add ability to ignore various messages checkpatch: add a "prefer __aligned" check checkpatch: validate signature styles and To: and Cc: lines checkpatch: add __rcu as a sparse modifier checkpatch: suggest using min_t or max_t ... Did this as a merge because of (trivial) conflicts in - Documentation/feature-removal-schedule.txt - arch/xtensa/include/asm/uaccess.h that were just easier to fix up in the merge than in the patch series.
2011-07-25drivers: use kzalloc/kcalloc instead of 'kmalloc+memset', where possibleRakib Mullick5-18/+9
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: David Airlie <airlied@linux.ie> Cc: Tejun Heo <tj@kernel.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 21:41:33 +0000