summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm
AgeCommit message (Collapse)AuthorFilesLines
2020-12-21drm/i915/gt: Provide a utility to create a scratch bufferChris Wilson7-117/+45
Primarily used by selftests, but also by runtime debugging of engine w/a, is a routine to create a temporarily bound buffer for readback. Almagamate the duplicated routines into one. Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201219020343.22681-2-chris@chris-wilson.co.uk
2020-12-21drm/i915/gt: Split logical ring contexts from execlist submissionChris Wilson14-3422/+3597
Split the definition, construction and updating of the Logical Ring Context from the execlist submission interface. The LRC is used by the HW, irrespective of our different submission backends. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201219020343.22681-1-chris@chris-wilson.co.uk
2020-12-20drm/i915/gt: Another tweak for flushing the taskletsChris Wilson3-7/+12
tasklet_kill() ensures that we _yield_ the processor until a remote tasklet is completed. However, this leads to a starvation condition as being at the bottom of the scheduler's runqueue means that anything else is able to run, including all hogs keeping the tasklet occupied. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201220134858.10510-1-chris@chris-wilson.co.uk
2020-12-18drm/i915: Check for rq->hwsp validity after acquiring RCU lockChris Wilson3-19/+39
Since we allow removing the timeline map at runtime, there is a risk that rq->hwsp points into a stale page. To control that risk, we hold the RCU read lock while reading *rq->hwsp, but we missed a couple of important barriers. First, the unpinning / removal of the timeline map must be after all RCU readers into that map are complete, i.e. after an rcu barrier (in this case courtesy of call_rcu()). Secondly, we must make sure that the rq->hwsp we are about to dereference under the RCU lock is valid. In this case, we make the rq->hwsp pointer safe during i915_request_retire() and so we know that rq->hwsp may become invalid only after the request has been signaled. Therefore is the request is not yet signaled when we acquire rq->hwsp under the RCU, we know that rq->hwsp will remain valid for the duration of the RCU read lock. This is a very small window that may lead to either considering the request not completed (causing a delay until the request is checked again, any wait for the request is not affected) or dereferencing an invalid pointer. Fixes: 3adac4689f58 ("drm/i915: Introduce concept of per-timeline (context) HWSP") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.1+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201218122421.18344-1-chris@chris-wilson.co.uk
2020-12-17drm/i915/tgl: Add bound checks and simplify TGL REVID macrosAditya Swarup1-10/+24
Add bound checks for TGL REV ID array. Since, there might be a possibility of using older kernels on latest platform revisions, resulting in out of bounds access for rev ID array. In this scenario, use the latest rev ID available and apply those WAs. Also, modify GT macros for TGL rev ID to reuse tgl_revids_get(). Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201203072359.156682-2-aditya.swarup@intel.com
2020-12-17drm/i915/tgl: Fix REVID macros for TGL to fetch correct steppingAditya Swarup1-6/+6
Fix TGL REVID macros to fetch correct display/gt stepping based on SOC rev id from INTEL_REVID() macro. Previously, we were just returning the first element of the revid array instead of using the correct index based on SOC rev id. Fixes: c33298cb34f5 ("drm/i915/tgl: Fix stepping WA matching") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Aditya Swarup <aditya.swarup@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201203072359.156682-1-aditya.swarup@intel.com
2020-12-17drm/i915/gt: Track the overall awake/busy timeChris Wilson6-3/+88
Since we wake the GT up before executing a request, and go to sleep as soon as it is retired, the GT wake time not only represents how long the device is powered up, but also provides a summary, albeit an overestimate, of the device runtime (i.e. the rc0 time to compare against rc6 time). v2: s/busy/awake/ v3: software-gt-awake-time and I915_PMU_SOFTWARE_GT_AWAKE_TIME Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154456.13954-1-chris@chris-wilson.co.uk
2020-12-17drm/i915/gt: Drain the breadcrumbs just onceChris Wilson4-7/+23
Matthew Brost pointed out that the while-loop on a shared breadcrumb was inherently fraught with danger as it competed with the other users of the breadcrumbs. However, in order to completely drain the re-arming irq worker, the while-loop is a necessity, despite my optimism that we could force cancellation with a couple of irq_work invocations. Given that we can't merely drop the while-loop, use an activity counter on the breadcrumbs to detect when we are parking the breadcrumbs for the last time. Based on a patch by Matthew Brost. Reported-by: Matthew Brost <matthew.brost@intel.com> Suggested-by: Matthew Brost <matthew.brost@intel.com> Fixes: 9d5612ca165a ("drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201217091524.10258-1-chris@chris-wilson.co.uk
2020-12-16drm/i915: Encode fence specific waitqueue behaviour into the wait.flagsChris Wilson1-10/+15
Use the wait_queue_entry.flags to denote the special fence behaviour (flattening continuations along fence chains, and for propagating errors) rather than trying to detect ordinary waiters by their functions. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201216165850.25030-1-chris@chris-wilson.co.uk
2020-12-16drm/i915/gt: Move gen8 CS emitters into gen8_engine_cs.hChris Wilson25-87/+117
Reduce the pollution of intel_engine.h by moving gen8_emit_pipe_control and friends to gen8_engine_cs.h Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201216135452.6063-1-chris@chris-wilson.co.uk
2020-12-16drm/i915/gem: Drop free_work for GEM contextsChris Wilson6-60/+8
The free_list and worker was introduced in commit 5f09a9c8ab6b ("drm/i915: Allow contexts to be unreferenced locklessly"), but subsequently made redundant by the removal of the last sleeping lock in commit 2935ed5339c4 ("drm/i915: Remove logical HW ID"). As we can now free the GEM context immediately from any context, remove the deferral of the free_list v2: Lift removing the context from the global list into close(). Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215152138.8158-1-chris@chris-wilson.co.uk
2020-12-16drm/i915: Fix mismatch between misplaced vma check and vma insertChris Wilson1-1/+1
When inserting a VMA, we restrict the placement to the low 4G unless the caller opts into using the full range. This was done to allow usersapce the opportunity to transition slowly from a 32b address space, and to avoid breaking inherent 32b assumptions of some commands. However, for insert we limited ourselves to 4G-4K, but on verification we allowed the full 4G. This causes some attempts to bind a new buffer to sporadically fail with -ENOSPC, but at other times be bound successfully. commit 48ea1e32c39d ("drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page") suggests that there is a genuine problem with stateless addressing that cannot utilize the last page in 4G and so we purposefully excluded it. This means that the quick pin pass may cause us to utilize a buggy placement. Reported-by: CQ Tang <cq.tang@intel.com> Testcase: igt/gem_exec_params/larger-than-life-batch Fixes: 48ea1e32c39d ("drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: CQ Tang <cq.tang@intel.com> Reviewed-by: CQ Tang <cq.tang@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Cc: <stable@vger.kernel.org> # v4.5+ Link: https://patchwork.freedesktop.org/patch/msgid/20201216092951.7124-1-chris@chris-wilson.co.uk
2020-12-14drm/i915/pmu: Remove !CONFIG_PM codeTvrtko Ursulin1-14/+0
Chris spotted that since 16ffe73c186b ("drm/i915/pmu: Use GT parked for estimating RC6 while asleep") we don't rely on runtime pm internals when estimating RC6 while asleep. We can remove the ifdef code to simplify and at the same time wake up the device less when querying RC6 if CONFIG_PM is not compiled in. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> References: 16ffe73c186b ("drm/i915/pmu: Use GT parked for estimating RC6 while asleep") Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201214094349.3563876-3-tvrtko.ursulin@linux.intel.com
2020-12-14drm/i915/pmu: Use raw clock for rc6 estimationTvrtko Ursulin1-5/+5
RC6 is a hardware counter and as such estimating it using the raw clock during runtime suspend is more appropriate. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> References: 34f439278cef ("perf: Add per event clockid support") Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201214094349.3563876-2-tvrtko.ursulin@linux.intel.com
2020-12-14drm/i915/pmu: Don't grab wakeref when enabling eventsTvrtko Ursulin1-23/+16
Chris found a CI report which points out calling intel_runtime_pm_get from inside i915_pmu_enable hook is not allowed since it can be invoked from hard irq context. This is something we knew but forgot, so lets fix it once again. We do this by syncing the internal book keeping with hardware rc6 counter on driver load. v2: * Always sync on parking and fully sync on init. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: f4e9894b6952 ("drm/i915/pmu: Correct the rc6 offset upon enabling") Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201214094349.3563876-1-tvrtko.ursulin@linux.intel.com
2020-12-10drm/i915/gt: Wean workaround selftests off GEM contextChris Wilson1-101/+88
The workarounds are tied to the GT and we should derive the tests local to the GT. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201210080240.24529-2-chris@chris-wilson.co.uk
2020-12-10drm/i915/gt: Mark legacy ring context as lostChris Wilson1-0/+1
When we reset the legacy ring context, due to potential corruption over suspend/resume, remove the valid bit so that we avoid loading garbage. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201210080240.24529-1-chris@chris-wilson.co.uk
2020-12-10drm/i915: Correct location of Wa_1408615072John Harrison1-4/+5
The above workaround was added as an engine workaround not a GT workaround. Moved it to the correct location. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201210170615.3107266-1-lucas.demarchi@intel.com
2020-12-09drm/i915: split gen8+ flush and bb_start emission functionsDaniele Ceraolo Spurio4-621/+664
These functions are independent from the backend used and can therefore be split out of the exelists submission file, so they can be re-used by the upcoming GuC submission backend. Based on a patch by Chris Wilson. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201209233618.4287-3-chris@chris-wilson.co.uk Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2020-12-09drm/i915/gt: Rename lrc.c to execlists_submission.cChris Wilson13-58/+16
We want to separate the utility functions for controlling the logical ring context from the execlists submission mechanism (which is an overgrown scheduler). This is similar to Daniele's work to split up the files, but being selfish I wanted to base it after my own changes to intel_lrc.c petered out. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201209233618.4287-2-chris@chris-wilson.co.uk
2020-12-09drm/i915/gt: Move move context layout registers and offsets to lrc_reg.hChris Wilson5-40/+43
Cleanup intel_lrc.h by moving some of the residual common register definitions into intel_lrc_reg.h, prior to rebranding and splitting off the submission backends. v2: keep the SCHEDULE enum in the old file, since it is specific to the gvt usage of the execlists submission backend (John) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> #v2 Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201209233618.4287-1-chris@chris-wilson.co.uk
2020-12-09drm/i915/gt: Remove uninterruptible parameter from intel_gt_wait_for_idleChris Wilson1-6/+1
Now that the only user of the uninterruptible wait was eliminated, remove the support. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201209164008.5487-3-chris@chris-wilson.co.uk
2020-12-09drm/i915: Sleep around performing iommu unmaps on TigerlakeChris Wilson1-2/+16
Tigerlake is plagued by spontaneous DMAR faults [reason 7, next page table ptr is invalid] which lead to GPU hangs. These faults occur when an iommu map is immediately reused. Adding further clflushes and barriers around either the GTT PTE or iommu PTE updates do not prevent the faults. So far the only effect has been from inducing a delay between reuse of the iommu on the GPU, and applying the delay at the iommu map allows for the smallest stable delay. Note that such a delay is hideous and clearly does not fix the root cause, and so should only be a bandaid until a complete solution is found. The delay was determined by running igt/gem_exec_fence/parallel in a loop for a few hours (unpatched MTBF is about 10s). We have also seen such DMAR fault [reason 7] errors on other platforms, notably gen9-gen11, but so far it has only been trivially and consistently reproduced on Tigerlake. v2: Leave a tell-tale to know when we apply the vt'd quirk, and as a reminder to remove it again. Hopefully. Testcase: igt/gem_exec_fence/parallel Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201209164008.5487-2-chris@chris-wilson.co.uk
2020-12-09drm/i915: Remove livelock from "do_idle_maps" vtd w/aChris Wilson1-15/+10
A call to wait for the GT to idle from inside the put_pages fallback is prone to cause an uninterruptible livelock. As it does not provide adequate serialisation with new requests, simply fallback to a trivial sleep. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201209164008.5487-1-chris@chris-wilson.co.uk
2020-12-09drm/i915/gt: document masked registersLucas De Marchi1-0/+11
Document what a masked register is according to bspec so we avoid developers using the wrong functions to implement WAs. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201209045246.2905675-3-lucas.demarchi@intel.com
2020-12-09drm/i915/gt: rename wa_write_masked_or()Lucas De Marchi1-44/+44
The use of "masked" in this function is due to its history. Once upon a time it received a mask and a value as parameter. Since commit eeec73f8a4a4 ("drm/i915/gt: Skip rmw for masked registers") that is not true anymore and now there is a clear and a set parameter. Depending on the case, that can still be thought as a mask and value, but there are some subtle differences: what we clear doesn't need to be the same bits we are setting, particularly when we are using masked registers. The fact that we also have "masked registers", i.e. registers whose mask is stored in the upper 16 bits of the register, makes it even more confusing, because "masked" in wa_write_masked_or() has little to do with masked registers, but rather refers to the old mask parameter the function received (that can also, but not exclusively, be used to write to masked register). Avoid the ambiguity and misnomer by renaming it to something else, hopefully less confusing: wa_write_clr_set(), to designate that we are doing both clr and set operations in the register. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201209045246.2905675-2-lucas.demarchi@intel.com
2020-12-09drm/i915/gt: stop ignoring read with wa_masked_field_setLucas De Marchi1-1/+1
When using masked registers, there is nothing to clear since a masked register has the mask in the upper 16b: we can just write to the location we want and use the mask to control what bits we are writing to. However that doesn't mean we don't want to read back the register and check the value actually matched what we wanted to write, i.e. that the WA stick. That should be an explicit opt-out for registers that are either write-only or that are affected by hardware misbehavior. Moreover both wa_masked_en() and wa_masked_dis() check the WA stick, so skipping the check just because the field is more than 1 bit is surprising and error-prone. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201209045246.2905675-1-lucas.demarchi@intel.com
2020-12-08drm/i915/gem: Drop false !i915_vma_is_closed assertionChris Wilson1-2/+0
Closed vma are protected by the GT wakeref held as we lookup the vma, so we know that the vma will not be freed as we process it for the execbuf. Instead we expect to catch the closed status of the context, and simply allow the close-race on an individual vma to be washed away. Longer term, the GT wakeref protection will be removed by explicit vma.kref tracking. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2245 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201207193824.18114-1-chris@chris-wilson.co.uk
2020-12-07drm/i915/selftests: Improve error reporting for igt_mock_max_segmentChris Wilson1-8/+7
When we fail to find a single block large enough to require splitting, report the largest block we did find. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201207130346.11849-1-chris@chris-wilson.co.uk
2020-12-07drm/i915: fix size_t greater or equal to zero comparisonColin Ian King1-1/+1
Currently the check that the unsigned size_t variable i is >= 0 is always true because the unsigned variable will never be negative, causing the loop to run forever. Fix this by changing the pre-decrement check to a zero check on i followed by a decrement of i. Addresses-Coverity: ("Unsigned compared against 0") Fixes: bfed6708d6c9 ("drm/i915: use vmap in shmem_pin_map") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201002170354.94627-1-colin.king@canonical.com
2020-12-05drm/i915: remove WA_SET_FIELD_MASKED()Lucas De Marchi1-8/+12
Remove the last macro and implement it as a function like the rest of the operations that don't assume there is a `wal` list, but rather receive it as argument. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201205092542.2325477-4-lucas.demarchi@intel.com
2020-12-05drm/i915: remove WA_CLR_BIT_MASKED()Lucas De Marchi1-10/+7
Just ommitting the list it's operating on doesn't save much typing and adds another way to do the same thing. Just replace it with wa_masked_dis(). Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201205092542.2325477-3-lucas.demarchi@intel.com
2020-12-05drm/i915: remove WA_SET_BIT_MASKED()Lucas De Marchi1-81/+78
Just ommitting the list it's operating on doesn't save much typing and adds another way to do the same thing. Just replace it with wa_masked_en(). Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201205092542.2325477-2-lucas.demarchi@intel.com
2020-12-05drm/i915/dg1: Implement WA_16011163337Swathi Dhanavanthri1-0/+10
Set GS Timer to 224 to prevent a HS/DS hang. Bspec: 53508 v2: reword commit message and add comment explaining why read verification is ignored (Chris) Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201205092542.2325477-1-lucas.demarchi@intel.com
2020-12-04drm/i915/gt: Clear the execlists timers upon resetChris Wilson1-0/+5
Across a reset, we stop the engine but not the timers. This leaves a window where the timers have inconsistent state with the engine, but should only result in a spurious timeout. As we cancel the outstanding events, also cancel their timers. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201204151234.19729-4-chris@chris-wilson.co.uk
2020-12-04drm/i915/gt: Include reset failures in the traceChris Wilson1-12/+10
The GT and engine reset failures are completely invisible when looking at a trace for a bug, but are vital to understanding the incomplete flow. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201204151234.19729-3-chris@chris-wilson.co.uk
2020-12-04drm/i915/gt: Cancel the preemption timeout on responding to itChris Wilson1-1/+3
We currently presume that the engine reset is successful, cancelling the expired preemption timer in the process. However, engine resets can fail, leaving the timeout still pending and we will then respond to the timeout again next time the tasklet fires. What we want is for the failed engine reset to be promoted to a full device reset, which is kicked by the heartbeat once the engine stops processing events. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1168 Fixes: 3a7a92aba8fb ("drm/i915/execlists: Force preemption") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201204151234.19729-2-chris@chris-wilson.co.uk
2020-12-04drm/i915/gt: Ignore repeated attempts to suspend request flow across resetChris Wilson1-0/+3
Before reseting the engine, we suspend the execution of the guilty request, so that we can continue execution with a new context while we slowly compress the captured error state for the guilty context. However, if the reset fails, we will promptly attempt to reset the same request again, and discover the ongoing capture. Ignore the second attempt to suspend and capture the same request. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1168 Fixes: 32ff621fd744 ("drm/i915/gt: Allow temporary suspension of inflight requests") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v5.7+ Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201204151234.19729-1-chris@chris-wilson.co.uk
2020-12-04drm/i915/gem: Propagate error from cancelled submit due to context closureChris Wilson1-2/+5
In the course of discovering and closing many races with context closure and execbuf submission, since commit 61231f6bd056 ("drm/i915/gem: Check that the context wasn't closed during setup") we started checking that the context was not closed by another userspace thread during the execbuf ioctl. In doing so we cancelled the inflight request (by telling it to be skipped), but kept reporting success since we do submit a request, albeit one that doesn't execute. As the error is known before we return from the ioctl, we can report the error we detect immediately, rather than leave it on the fence status. With the immediate propagation of the error, it is easier for userspace to handle. Fixes: 61231f6bd056 ("drm/i915/gem: Check that the context wasn't closed during setup") Testcase: igt/gem_ctx_exec/basic-close-race Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v5.7+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201203103432.31526-1-chris@chris-wilson.co.uk
2020-12-03drm/i915/gem: Check the correct variable in selftestDan Carpenter1-2/+2
There is a copy and paste bug in this code. It's supposed to check "obj2" instead of checking "obj" a second time. Fixes: 80f0b679d6f0 ("drm/i915: Add an implementation for i915_gem_ww_ctx locking, v2.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/8ilneOcJAjwqU4t@mwand
2020-12-02Revert "drm/i915/lmem: Limit block size to 4G"Chris Wilson4-32/+26
Mixing I915_ALLOC_CONTIGUOUS and I915_ALLOC_MAX_SEGMENT_SIZE fared badly. The two directives conflict, with the contiguous request setting the min_order to the full size of the object, and the max-segment-size setting the max_order to the limit of the DMA mapper. This results in a situation where max_order < min_order, causing our sanity checks to fail. Instead of limiting the buddy block size, in the previous patch we split the oversized buddy into multiple scatterlist elements. Fixes: d2cf0125d4a1 ("drm/i915/lmem: Limit block size to 4G") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201202173444.14903-2-chris@chris-wilson.co.uk
2020-12-02drm/i915/gem: Limit lmem scatterlist elements to UINT_MAXChris Wilson2-22/+41
Adhere to the i915_sg_max_segment() limit on the lengths of individual scatterlist elements, and in doing so split up very large chunks of lmem into manageable pieces for the dma-mapping backend. Reported-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Suggested-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201202173444.14903-1-chris@chris-wilson.co.uk
2020-12-02drm/i915/selftests: Tidy prng constructor for client blitsChris Wilson1-3/+1
Since we only initialise the prng once within the scope of the selftest, we can use the default initialiser. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201202130406.18461-1-chris@chris-wilson.co.uk
2020-12-02drm/i915/pmu: Deprecate I915_PMU_LAST and optimize state trackingTvrtko Ursulin2-33/+86
Adding any kinds of "last" abi markers is usually a mistake which I repeated when implementing the PMU because it felt convenient at the time. This patch marks I915_PMU_LAST as deprecated and stops the internal implementation using it for sizing the event status bitmask and array. New way of sizing the fields is a bit less elegant, but it omits reserving slots for tracking events we are not interested in, and as such saves some runtime space. Adding sampling events is likely to be a special event and the new plumbing needed will be easily detected in testing. Existing asserts against the bitfield and array sizes are keeping the code safe. First event which gets the new treatment in this new scheme are the interrupts - which neither needs any tracking in i915 pmu nor needs waking up the GPU to read it. v2: * Streamline helper names. (Chris) v3: * Comment which events need tracking. (Chris) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201201131757.206367-1-tvrtko.ursulin@linux.intel.com
2020-12-02drm/i915/gem: Report error for vmap() failureChris Wilson1-2/+4
Convert the NULL pointer from a failed vmap() to ERR_PTR(-ENOMEM) for propagation. <1> [269.830447] BUG: kernel NULL pointer dereference, address: 0000000000000000 <1> [269.830455] #PF: supervisor write access in kernel mode <1> [269.830457] #PF: error_code(0x0002) - not-present page <6> [269.830459] PGD 0 P4D 0 <4> [269.830465] Oops: 0002 [#1] PREEMPT SMP PTI <4> [269.830469] CPU: 3 PID: 5789 Comm: i915_selftest Tainted: G U 5.10.0-rc6-CI-CI_DRM_9412+ #1 <4> [269.830472] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 <4> [269.830636] RIP: 0010:igt_client_fill+0x1b9/0x5f0 [i915] <4> [269.830640] Code: e8 0c 32 02 00 48 89 c5 48 3d 00 f0 ff ff 0f 87 e9 02 00 00 48 8b 8b 78 06 00 00 44 89 f0 48 89 ef 35 af be ad de 48 c1 e9 02 <f3> ab 0f b6 83 80 03 00 00 89 c2 c0 ea 03 83 e2 02 75 09 83 c8 20 <4> [269.830642] RSP: 0018:ffffc900007a79e8 EFLAGS: 00010206 <4> [269.830645] RAX: 00000000df0bf37b RBX: ffff88811d8af3c0 RCX: 00000000010afc00 <4> [269.830647] RDX: 0000000000000000 RSI: ffffffff822f2b17 RDI: 0000000000000000 <4> [269.830648] RBP: 0000000000000000 R08: ffff888111c80930 R09: 00000000fffffffe <4> [269.830650] R10: 0000000000000000 R11: 00000000ffbc70e4 R12: ffff88811090f700 <4> [269.830652] R13: ffff88810df60180 R14: 0000000001a64dd4 R15: 0000000000000000 <4> [269.830655] FS: 00007f137b07de40(0000) GS:ffff88817b980000(0000) knlGS:0000000000000000 <4> [269.830657] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [269.830659] CR2: 0000000000000000 CR3: 0000000115984000 CR4: 0000000000350ee0 <4> [269.830661] Call Trace: <4> [269.830780] __i915_subtests.cold.7+0x42/0x92 [i915] <4> [269.830886] ? __i915_nop_teardown+0x10/0x10 [i915] <4> [269.830989] ? __i915_live_setup+0x30/0x30 [i915] <4> [269.831104] __run_selftests.part.3+0xf7/0x14c [i915] <4> [269.831939] i915_live_selftests.cold.5+0x1f/0x47 [i915] <4> [269.832027] i915_pci_probe+0x93/0x1d0 [i915] <4> [269.832037] ? _raw_spin_unlock_irqrestore+0x2f/0x50 <4> [269.832043] pci_device_probe+0x9e/0x110 <4> [269.832049] really_probe+0x1c4/0x430 <4> [269.832053] driver_probe_device+0xd9/0x140 <4> [269.832056] device_driver_attach+0x4a/0x50 <4> [269.832059] __driver_attach+0x83/0x140 <4> [269.832062] ? device_driver_attach+0x50/0x50 <4> [269.832064] ? device_driver_attach+0x50/0x50 <4> [269.832067] bus_for_each_dev+0x75/0xc0 <4> [269.832070] bus_add_driver+0x14b/0x1f0 <4> [269.832073] driver_register+0x66/0xb0 <4> [269.832160] i915_init+0x70/0x87 [i915] <4> [269.832164] ? 0xffffffffa05e3000 <4> [269.832168] do_one_initcall+0x56/0x2e0 <4> [269.832174] ? kmem_cache_alloc_trace+0x6a4/0x770 <4> [269.832180] do_init_module+0x55/0x200 <4> [269.832184] load_module+0x22a2/0x2480 <4> [269.832191] ? __do_sys_finit_module+0xad/0x110 <4> [269.832194] __do_sys_finit_module+0xad/0x110 <4> [269.832199] do_syscall_64+0x33/0x80 <4> [269.832202] entry_SYSCALL_64_after_hwframe+0x44/0xa9 <4> [269.832204] RIP: 0033:0x7f137a718839 <4> [269.832208] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 <4> [269.832210] RSP: 002b:00007ffc4267d308 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 <4> [269.832214] RAX: ffffffffffffffda RBX: 000056288b88f0d0 RCX: 00007f137a718839 <4> [269.832216] RDX: 0000000000000000 RSI: 000056288b895850 RDI: 0000000000000007 <4> [269.832218] RBP: 000056288b895850 R08: 312d3d7374736574 R09: 000056288b88c020 <4> [269.832220] R10: 00007ffc4267d450 R11: 0000000000000246 R12: 0000000000000000 <4> [269.832222] R13: 000056288b8877a0 R14: 0000000000000020 R15: 0000000000000045 <4> [269.832226] Modules linked in: i915(+) vgem mei_hdcp snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel cdc_ether usbnet snd_intel_dspcfg mii snd_hda_codec snd_hwdep snd_hda_core r8169 snd_pcm realtek mei_me mei prime_numbers intel_lpss_pci i2c_hid pinctrl_geminilake [last unloaded: i915] <4> [269.832264] CR2: 0000000000000000 Fixes: cb2ce93e5b05 ("drm/i915/gem: Differentiate oom failures from invalid map types") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201201215441.31900-1-chris@chris-wilson.co.uk
2020-12-01drm/i915/tgl, rkl, dg1: Apply WA_1406941453 to TGL, RKL and DG1Swathi Dhanavanthri1-7/+5
This workaround is applicable only for tgl,rkl and dg1. Bspec: 52890, 53273, 53508. Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com> Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201201175735.1377372-1-lucas.demarchi@intel.com
2020-11-30drm/i915/gem: Differentiate oom failures from invalid map typesChris Wilson1-14/+12
After a cursory check on the parameters to i915_gem_object_pin_map(), where we return a precise error, if the backend rejects the mapping we always return PTR_ERR(-ENOMEM). Let us also return a more precise error here so we can differentiate between running out of memory and programming errors (or situations where we may be trying different paths and looking for an error from an unsupported map). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201127195334.13134-1-chris@chris-wilson.co.uk
2020-11-30drm/i915/lmem: Limit block size to 4GVenkata Sandeep Dhanalakota4-4/+72
Block sizes are only limited by the largest power-of-two that will fit in the region size, but to construct an object we also require feeding it into an sg list, where the upper limit of the sg entry is at most UINT_MAX. Therefore to prevent issues with allocating blocks that are too large, add the flag I915_ALLOC_MAX_SEGMENT_SIZE which should limit block sizes to the i915_sg_segment_size(). v2: (matt) - query the max segment. - prefer flag to limit block size to 4G, since it's best not to assume the user will feed the blocks into an sg list. - simple selftest so we don't have to guess. Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: CQ Tang <cq.tang@intel.com> Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201130134721.54457-1-matthew.auld@intel.com
2020-11-30drm/i915/selftest: assert we get 2M GTT pagesMatthew Auld1-0/+21
For the LMEM case if we have suitable alignment and 2M physical pages we should always get 2M GTT pages within the constraints of the hugepages selftest. If we don't then something might be wrong in our construction of the backing pages. References: 330b7d33056b ("drm/i915/region: fix order when adding blocks") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201130141809.65330-2-matthew.auld@intel.com
2020-11-30drm/i915/selftest: also consider non-contiguous objectsMatthew Auld1-0/+1
In igt_ppgtt_sanity_check we should also exercise the non-contiguous option for LMEM, since this will give us slightly different sg layouts and alignment. Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201130141809.65330-1-matthew.auld@intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-03 16:27:57 +0000