summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm
AgeCommit message (Collapse)AuthorFilesLines
2019-11-18drm/i915/pmu: "Frequency" is reported as accumulated cyclesChris Wilson1-2/+2
We report "frequencies" (actual-frequency, requested-frequency) as the number of accumulated cycles so that the average frequency over that period may be determined by the user. This means the units we report to the user are Mcycles (or just M), not MHz. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191109105356.5273-1-chris@chris-wilson.co.uk (cherry picked from commit e88866ef02851c88fe95a4bb97820b94b4d46f36) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit a7d87b70d6da96c6772e50728c8b4e78e4cbfd55) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-18drm/i915: Preload LUTs if the hw isn't currently using themVille Syrjälä4-0/+69
The LUTs are single buffered so in order to program them without tearing we'd have to do it during vblank (actually to be 100% effective it has to happen between start of vblank and frame start). We have no proper mechanism for that at the moment so we just defer loading them after the vblank waits have happened. That is not quite sufficient (especially when committing multiple pipes whose vblanks don't line up) so the LUT load will often leak into the following frame causing tearing. However in case the hardware wasn't previously using the LUT we can preload it before setting the enable bit (which is double buffered so won't tear). Let's determine if we can do such preloading and make it happen. Slight variation between the hardware requires some platforms specifics in the checks. Hans is seeing ugly colored flash on VLV/CHV macchines (GPD win and Asus T100HA) when the gamma LUT gets loaded for the first time as the BIOS has left some junk in the LUT memory. v2: Deal with uapi vs. hw crtc state split s/GCM/CGM/ typo fix Cc: Hans de Goede <hdegoede@redhat.com> Fixes: 051a6d8d3ca0 ("drm/i915: Move LUT programming to happen after vblank waits") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191030190815.7359-1-ville.syrjala@linux.intel.com Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> (cherry picked from commit 0ccc42a2fd5107a7f58e62c8b35b61de9a70ce82) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit f77021372e2880237278e0ee57faadc077a8256a) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-18drm/i915: Don't oops in dumb_create ioctl if we have no crtcsVille Syrjälä1-0/+3
Make sure we have a crtc before probing its primary plane's max stride. Initially I thought we can't get this far without crtcs, but looks like we can via the dumb_create ioctl. Not sure if we shouldn't disable dumb buffer support entirely when we have no crtcs, but that would require some amount of work as the only thing currently being checked is dev->driver->dumb_create which we'd have to convert to some device specific dynamic thing. Cc: stable@vger.kernel.org Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Fixes: aa5ca8b7421c ("drm/i915: Align dumb buffer stride to 4k to allow for gtt remapping") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191106172349.11987-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit baea9ffe64200033499a4955f431e315bb807899) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit aeec766133f99d45aad60d650de50fb382104d95) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-15Merge tag 'drm-fixes-2019-11-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds6-37/+23
Pull drm fixes from Dave Airlie: "Here is this weeks non-intel hw vuln fixes pull. Three drivers, all small fixes. i915: - MOCS table fixes for EHL and TGL - Update Display's rawclock on resume - GVT's dmabuf reference drop fix amdgpu: - Fix a potential crash in firmware parsing sun4i: - One fix to the dotclock dividers range for sun4i" * tag 'drm-fixes-2019-11-15' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: fix null pointer deref in firmware header printing drm/i915/tgl: MOCS table update Revert "drm/i915/ehl: Update MOCS table for EHL" drm/sun4i: tcon: Set min division of TCON0_DCLK to 1. drm/i915: update rawclk also on resume drm/i915/gvt: fix dropping obj reference twice
2019-11-15Merge tag 'drm-fixes-5.4-2019-11-14' of ↵Dave Airlie1-22/+16
git://people.freedesktop.org/~agd5f/linux into drm-fixes drm-fixes-5.4-2019-11-14: amdgpu: - Fix a potential crash in firmware parsing Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191114221354.3914-1-alexander.deucher@amd.com
2019-11-15Merge tag 'drm-misc-fixes-2019-11-13' of ↵Dave Airlie1-1/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - One fix to the dotclock dividers range for sun4i Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191113142645.GA967172@gilmour.lan
2019-11-14drm/amdgpu: fix null pointer deref in firmware header printingXiaojie Yuan1-22/+16
v2: declare as (struct common_firmware_header *) type because struct xxx_firmware_header inherits from it When CE's ucode_id(8) is used to get sdma_hdr, we will be accessing an unallocated amdgpu_firmware_info instance. This issue appears on rhel7.7 with gcc 4.8.5. Newer compilers might have optimized out such 'defined but not referenced' variable. [ 1120.798564] BUG: unable to handle kernel NULL pointer dereference at 000000000000000a [ 1120.806703] IP: [<ffffffffc0e3c9b3>] psp_np_fw_load+0x1e3/0x390 [amdgpu] [ 1120.813693] PGD 80000002603ff067 PUD 271b8d067 PMD 0 [ 1120.818931] Oops: 0000 [#1] SMP [ 1120.822245] Modules linked in: amdgpu(OE+) amdkcl(OE) amd_iommu_v2 amdttm(OE) amd_sched(OE) xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun bridge stp llc devlink ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat iptable_mangle iptable_security iptable_raw nf_conntrack libcrc32c ip_set nfnetlink ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc dm_mirror dm_region_hash dm_log dm_mod intel_pmc_core intel_powerclamp coretemp intel_rapl joydev kvm_intel eeepc_wmi asus_wmi kvm sparse_keymap iTCO_wdt irqbypass rfkill crc32_pclmul snd_hda_codec_realtek mxm_wmi ghash_clmulni_intel intel_wmi_thunderbolt iTCO_vendor_support snd_hda_codec_generic snd_hda_codec_hdmi aesni_intel lrw gf128mul glue_helper ablk_helper sg cryptd pcspkr snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd pinctrl_sunrisepoint pinctrl_intel soundcore acpi_pad mei_me wmi mei i2c_i801 pcc_cpufreq ip_tables ext4 mbcache jbd2 sd_mod crc_t10dif crct10dif_generic i915 i2c_algo_bit iosf_mbi drm_kms_helper e1000e syscopyarea sysfillrect sysimgblt fb_sys_fops ahci libahci drm ptp libata crct10dif_pclmul crct10dif_common crc32c_intel serio_raw pps_core drm_panel_orientation_quirks video i2c_hid [ 1120.954136] CPU: 4 PID: 2426 Comm: modprobe Tainted: G OE ------------ 3.10.0-1062.el7.x86_64 #1 [ 1120.964390] Hardware name: System manufacturer System Product Name/Z170-A, BIOS 1302 11/09/2015 [ 1120.973321] task: ffff991ef1e3c1c0 ti: ffff991ee625c000 task.ti: ffff991ee625c000 [ 1120.981020] RIP: 0010:[<ffffffffc0e3c9b3>] [<ffffffffc0e3c9b3>] psp_np_fw_load+0x1e3/0x390 [amdgpu] [ 1120.990483] RSP: 0018:ffff991ee625f950 EFLAGS: 00010202 [ 1120.995935] RAX: 0000000000000002 RBX: ffff991edf6b2d38 RCX: ffff991edf6a0000 [ 1121.003391] RDX: 0000000000000000 RSI: ffff991f01d13898 RDI: ffffffffc110afb3 [ 1121.010706] RBP: ffff991ee625f9b0 R08: 0000000000000000 R09: 0000000000000000 [ 1121.018029] R10: 00000000000004c4 R11: ffff991ee625f64e R12: ffff991edf6b3220 [ 1121.025353] R13: ffff991edf6a0000 R14: 0000000000000008 R15: ffff991edf6b2d30 [ 1121.032666] FS: 00007f97b0c0b740(0000) GS:ffff991f01d00000(0000) knlGS:0000000000000000 [ 1121.041000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1121.046880] CR2: 000000000000000a CR3: 000000025e604000 CR4: 00000000003607e0 [ 1121.054239] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1121.061631] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1121.068938] Call Trace: [ 1121.071494] [<ffffffffc0e3dba8>] psp_hw_init+0x218/0x270 [amdgpu] [ 1121.077886] [<ffffffffc0da3188>] amdgpu_device_fw_loading+0xe8/0x160 [amdgpu] [ 1121.085296] [<ffffffffc0e3b34c>] ? vega10_ih_irq_init+0x4bc/0x730 [amdgpu] [ 1121.092534] [<ffffffffc0da5c75>] amdgpu_device_init+0x1495/0x1c90 [amdgpu] [ 1121.099675] [<ffffffffc0da9cab>] amdgpu_driver_load_kms+0x8b/0x2f0 [amdgpu] [ 1121.106888] [<ffffffffc01b25cf>] drm_dev_register+0x12f/0x1d0 [drm] [ 1121.113419] [<ffffffffa4dcdfd8>] ? pci_enable_device_flags+0xe8/0x140 [ 1121.120183] [<ffffffffc0da260a>] amdgpu_pci_probe+0xca/0x170 [amdgpu] [ 1121.126919] [<ffffffffa4dcf97a>] local_pci_probe+0x4a/0xb0 [ 1121.132622] [<ffffffffa4dd10c9>] pci_device_probe+0x109/0x160 [ 1121.138607] [<ffffffffa4eb4205>] driver_probe_device+0xc5/0x3e0 [ 1121.144766] [<ffffffffa4eb4603>] __driver_attach+0x93/0xa0 [ 1121.150507] [<ffffffffa4eb4570>] ? __device_attach+0x50/0x50 [ 1121.156422] [<ffffffffa4eb1da5>] bus_for_each_dev+0x75/0xc0 [ 1121.162213] [<ffffffffa4eb3b7e>] driver_attach+0x1e/0x20 [ 1121.167771] [<ffffffffa4eb3620>] bus_add_driver+0x200/0x2d0 [ 1121.173590] [<ffffffffa4eb4c94>] driver_register+0x64/0xf0 [ 1121.179345] [<ffffffffa4dd0905>] __pci_register_driver+0xa5/0xc0 [ 1121.185593] [<ffffffffc099f000>] ? 0xffffffffc099efff [ 1121.190914] [<ffffffffc099f0a4>] amdgpu_init+0xa4/0xb0 [amdgpu] [ 1121.197101] [<ffffffffa4a0210a>] do_one_initcall+0xba/0x240 [ 1121.202901] [<ffffffffa4b1c90a>] load_module+0x271a/0x2bb0 [ 1121.208598] [<ffffffffa4dad740>] ? ddebug_proc_write+0x100/0x100 [ 1121.214894] [<ffffffffa4b1ce8f>] SyS_init_module+0xef/0x140 [ 1121.220698] [<ffffffffa518bede>] system_call_fastpath+0x25/0x2a [ 1121.226870] Code: b4 01 60 a2 00 00 31 c0 e8 83 60 33 e4 41 8b 47 08 48 8b 4d d0 48 c7 c7 b3 af 10 c1 48 69 c0 68 07 00 00 48 8b 84 01 60 a2 00 00 <48> 8b 70 08 31 c0 48 89 75 c8 e8 56 60 33 e4 48 8b 4d d0 48 c7 [ 1121.247422] RIP [<ffffffffc0e3c9b3>] psp_np_fw_load+0x1e3/0x390 [amdgpu] [ 1121.254432] RSP <ffff991ee625f950> [ 1121.258017] CR2: 000000000000000a [ 1121.261427] ---[ end trace e98b35387ede75bd ]--- Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Fixes: c5fb912653dae3f878 ("drm/amdgpu: add firmware header printing for psp fw loading (v2)") Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/i915/tgl: MOCS table updateMatt Roper1-1/+1
The bspec was just updated with a minor correction to entry 61 (it shouldn't have had the SCF bit set). v2: - Add a MOCS_ENTRY_UNUSED() and use it to declare the explicitly-reserved MOCS entries. (Lucas) - Move the warning suppression from the Makefile to a #pragma that only affects the TGL table. (Lucas) v3: - Entries 16 and 17 are identical to ICL now, so no need to explicitly adjust them (or mess with compiler warning overrides). Bspec: 45101 Fixes: 2ddf992179c4 ("drm/i915/tgl: Define MOCS entries for Tigerlake") Cc: Tomasz Lis <tomasz.lis@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Francisco Jerez <francisco.jerez.plata@intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191112224757.25116-2-matthew.d.roper@intel.com Reviewed-by: Francisco Jerez <currojerez@riseup.net> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> (cherry picked from commit bfb0e8e63d865559cc97af235aea583b7dcc235f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-13Revert "drm/i915/ehl: Update MOCS table for EHL"Matt Roper1-8/+0
This reverts commit f4071997f1de016780ec6b79c63d90cd5886ee83. These extra EHL entries won't behave as expected without a bit more work on the kernel side so let's drop them until that kernel work has had a chance to land. Userspace trying to use these new entries won't get the advantage of the new functionality these entries are meant to provide, but at least it won't misbehave. When we do add these back in the future, we'll probably want to explicitly use separate tables for ICL and EHL so that userspace software that mistakenly uses these entries (which are undefined on ICL) sees the same behavior it sees with all the other undefined entries. Cc: Francisco Jerez <francisco.jerez.plata@intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: <stable@vger.kernel.org> # v5.3+ Fixes: f4071997f1de ("drm/i915/ehl: Update MOCS table for EHL") Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191112224757.25116-1-matthew.d.roper@intel.com Reviewed-by: Francisco Jerez <currojerez@riseup.net> (cherry picked from commit 046091758b50a5fff79726a31c1391614a3d84c8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-13drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.Yunhao Tian1-1/+1
The datasheet of V3s (and various other chips) wrote that TCON0_DCLK_DIV can be >= 1 if only dclk is used, and must >= 6 if dclk1 or dclk2 is used. As currently neither dclk1 nor dclk2 is used (no writes to these bits), let's set minimal division to 1. If this minimal division is 6, some common dot clock frequencies can't be produced (e.g. 30MHz will not be possible and will fallback to 25MHz), which is obviously not an expected behaviour. Signed-off-by: Yunhao Tian <t123yh@outlook.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/linux-arm-kernel/MN2PR08MB57905AD8A00C08DA219377C989760@MN2PR08MB5790.namprd08.prod.outlook.com/
2019-11-12Merge tag 'gvt-fixes-2019-11-12' of https://github.com/intel/gvt-linux into ↵Rodrigo Vivi1-2/+2
drm-intel-fixes gvt-fixes-2019-11-12 - Fix dmabuf reference drop (Pan) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191112061834.GN4196@zhen-hp.sh.intel.com
2019-11-12drm/i915: update rawclk also on resumeJani Nikula2-3/+3
Since CNP it's possible for rawclk to have two different values, 19.2 and 24 MHz. If the value indicated by SFUSE_STRAP register is different from the power on default for PCH_RAWCLK_FREQ, we'll end up having a mismatch between the rawclk hardware and software states after suspend/resume. On previous platforms this used to work by accident, because the power on defaults worked just fine. Update the rawclk also on resume. The natural place to do this would be intel_modeset_init_hw(), however VLV/CHV need it done before intel_power_domains_init_hw(). Thus put it there even if it feels slightly out of place. v2: Call intel_update_rawclck() in intel_power_domains_init_hw() for all platforms (Ville). Reported-by: Shawn Lee <shawn.c.lee@intel.com> Cc: Shawn Lee <shawn.c.lee@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Shawn Lee <shawn.c.lee@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191101142024.13877-1-jani.nikula@intel.com (cherry picked from commit 59ed05ccdded5eb18ce012eff3d01798ac8535fa) Cc: <stable@vger.kernel.org> # v4.15+ Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-11Merge Intel Gen8/Gen9 graphics fixes from Jon Bloomfield.Linus Torvalds13-172/+595
This fixes two different classes of bugs in the Intel graphics hardware: MMIO register read hang: "On Intels Gen8 and Gen9 Graphics hardware, a read of specific graphics MMIO registers when the product is in certain low power states causes a system hang. There are two potential triggers for DoS: a) H/W corruption of the RC6 save/restore vector b) Hard hang within the MIPI hardware This prevents the DoS in two areas of the hardware: 1) Detect corruption of RC6 address on exit from low-power state, and if we find it corrupted, disable RC6 and RPM 2) Permanently lower the MIPI MMIO timeout" Blitter command streamer unrestricted memory accesses: "On Intels Gen9 Graphics hardware the Blitter Command Streamer (BCS) allows writing to Memory Mapped Input Output (MMIO) that should be blocked. With modifications of page tables, this can lead to privilege escalation. This exposure is limited to the Guest Physical Address space and does not allow for access outside of the graphics virtual machine. This series establishes a software parser into the Blitter command stream to scan for, and prevent, reads or writes to MMIO's that should not be accessible to non-privileged contexts. Much of the command parser infrastructure has existed for some time, and is used on Ivybridge/Haswell/Valleyview derived products to allow the use of features normally blocked by hardware. In this legacy context, the command parser is employed to allow normally unprivileged submissions to be run with elevated privileges in order to grant access to a limited set of extra capabilities. In this mode the parser is optional; In the event that the parser finds any construct that it cannot properly validate (e.g. nested command buffers), it simply aborts the scan and submits the buffer in non-privileged mode. For Gen9 Graphics, this series makes the parser mandatory for all Blitter submissions. The incoming user buffer is first copied to a kernel owned buffer, and parsed. If all checks are successful the kernel owned buffer is mapped READ-ONLY and submitted on behalf of the user. If any checks fail, or the parser is unable to complete the scan (nested buffers), it is forcibly rejected. The successfully scanned buffer is executed with NORMAL user privileges (key difference from legacy usage). Modern usermode does not use the Blitter on later hardware, having switched over to using the 3D engine instead for performance reasons. There are however some legacy usermode apps that rely on Blitter, notably the SNA X-Server. There are no known usermode applications that require nested command buffers on the Blitter, so the forcible rejection of such buffers in this patch series is considered an acceptable limitation" * Intel graphics fixes in emailed bundle from Jon Bloomfield <jon.bloomfield@intel.com>: drm/i915/cmdparser: Fix jump whitelist clearing drm/i915/gen8+: Add RC6 CTX corruption WA drm/i915: Lower RM timeout to avoid DSI hard hangs drm/i915/cmdparser: Ignore Length operands during command matching drm/i915/cmdparser: Add support for backward jumps drm/i915/cmdparser: Use explicit goto for error paths drm/i915: Add gen9 BCS cmdparsing drm/i915: Allow parsing of unsized batches drm/i915: Support ro ppgtt mapped cmdparser shadow buffers drm/i915: Add support for mandatory cmdparsing drm/i915: Remove Master tables from cmdparser drm/i915: Disable Secure Batches for gen6+ drm/i915: Rename gen7 cmdparser tables
2019-11-11drm/i915/cmdparser: Fix jump whitelist clearingBen Hutchings1-3/+2
When a jump_whitelist bitmap is reused, it needs to be cleared. Currently this is done with memset() and the size calculation assumes bitmaps are made of 32-bit words, not longs. So on 64-bit architectures, only the first half of the bitmap is cleared. If some whitelist bits are carried over between successive batches submitted on the same context, this will presumably allow embedding the rogue instructions that we're trying to reject. Use bitmap_zero() instead, which gets the calculation right. Fixes: f8c08d8faee5 ("drm/i915/cmdparser: Add support for backward jumps") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
2019-11-08Merge tag 'drm-fixes-5.4-2019-11-06' of ↵Dave Airlie16-24/+106
git://people.freedesktop.org/~agd5f/linux into drm-fixes drm-fixes-5.4-2019-11-06: amdgpu: - Fix navi14 display issue root cause and revert workaround - GPU reset scheduler interaction fix - Fix fan boost on multi-GPU - Gfx10 and sdma5 fixes for navi - GFXOFF fix for renoir - Add navi14 PCI ID - GPUVM fix for arcturus radeon: - Port an SI power fix from amdgpu Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191107032241.1021217-1-alexander.deucher@amd.com
2019-11-08Merge tag 'drm-intel-fixes-2019-11-06' of ↵Dave Airlie3-1/+24
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix HPD poll to avoid kworker consuming a lot of cpu cycles. - Do not use TBT type for non Type-C ports. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191106213958.GA16525@intel.com
2019-11-08drm/i915/gvt: fix dropping obj reference twicePan Bian1-2/+2
The reference count of obj will be decremented twice if error occurs in dma_buf_fd(). Additionally, attempting to read the reference count of obj after dropping reference may lead to a use after free bug. Here, we drop obj's reference until it is not used. Fixes: e546e281d33d ("drm/i915/gvt: Dmabuf support for GVT-g") Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-11-08Merge tag 'drm-misc-fixes-2019-11-07-1' of ↵Dave Airlie2-8/+25
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - Some new documentation for GEM shmem madvise helpers - Fix for a state dereference in atomic self-refresh helpers - One compilation fix for c2p fbdev helpers Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191107082215.GA34850@gilmour.lan
2019-11-06drm/radeon: fix si_enable_smc_cac() failed issueAlex Deucher1-0/+1
Need to set the dte flag on this asic. Port the fix from amdgpu: 5cb818b861be114 ("drm/amd/amdgpu: fix si_enable_smc_cac() failed issue") Reviewed-by: Yong Zhao <yong.zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-11-06drm/amdgpu/renoir: move gfxoff handling into gfx9 moduleAlex Deucher2-5/+6
To properly handle the option parsing ordering. Reviewed-by: Yong Zhao <yong.zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amdgpu: add warning for GRBM 1-cycle delay issue in gfx9changzhu1-0/+7
It needs to add warning to update firmware in gfx9 in case that firmware is too old to have function to realize dummy read in cp firmware. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amdgpu: add dummy read by engines for some GCVM status registers in gfx10changzhu4-6/+64
The GRBM register interface is now capable of bursting 1 cycle per register wr->wr, wr->rd much faster than previous muticycle per transaction done interface. This has caused a problem where status registers requiring HW to update have a 1 cycle delay, due to the register update having to go through GRBM. For cp ucode, it has realized dummy read in cp firmware.It covers the use of WAIT_REG_MEM operation 1 case only.So it needs to call gfx_v10_0_wait_reg_mem in gfx10. Besides it also needs to add warning to update firmware in case firmware is too old to have function to realize dummy read in cp firmware. For sdma ucode, it hasn't realized dummy read in sdma firmware. sdma is moved to gfxhub in gfx10. So it needs to add dummy read in driver between amdgpu_ring_emit_wreg and amdgpu_ring_emit_reg_wait for sdma_v5_0. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amdgpu: register gpu instance before fan boost feature enablmentEvan Quan2-1/+7
Otherwise, the feature enablement will be skipped due to wrong count. Fixes: beff74bc6e0fa91 ("drm/amdgpu: fix a race in GPU reset with IB test (v2)") Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amd/swSMU: fix smu workload bit map errorKevin Wang2-2/+2
fix workload bit (WORKLOAD_PPLIB_COMPUTE_BIT) map error on vega20 and navi asic. fix commit: drm/amd/powerplay: add function get_workload_type_map for swsmu Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amdgpu: add navi14 PCI IDTianci.Yin1-0/+1
Add the navi14 PCI device id. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06Revert "drm/amd/display: setting the DIG_MODE to the correct value."Zhan Liu1-9/+0
This reverts commit 385857adb8154563840e5b0f200254126618f464. Reason for revert: Root cause of this issue is found. The workaround is not needed anymore. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amd/display: Add ENGINE_ID_DIGD condition check for Navi14Zhan Liu1-0/+5
[Why] Navi10 has 6 PHY, but Navi14 only has 5 PHY, that is because there is no ENGINE_ID_DIGD in Navi14. Without this patch, many HDMI related issues (e.g. HDMI S3 resume failure, HDMI pink screen on boot) will be observed. [How] If "eng_id" is larger than ENGINE_ID_DIGD, then add "eng_id" by 1. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amdgpu: dont schedule jobs while in resetShirish S1-1/+4
[Why] doing kthread_park()/unpark() from drm_sched_entity_fini while GPU reset is in progress defeats all the purpose of drm_sched_stop->kthread_park. If drm_sched_entity_fini->kthread_unpark() happens AFTER drm_sched_stop->kthread_park nothing prevents from another (third) thread to keep submitting job to HW which will be picked up by the unparked scheduler thread and try to submit to HW but fail because the HW ring is deactivated. [How] grab the reset lock before calling drm_sched_entity_fini() Signed-off-by: Shirish S <shirish.s@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/amdgpu/arcturus: properly set BANK_SELECT and FRAGMENT_SIZEAlex Deucher1-0/+9
These were not aligned for optimal performance for GPUVM. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-06drm/atomic: fix self-refresh helpers crtc state dereferenceRob Clark2-8/+25
drm_self_refresh_helper_update_avg_times() was incorrectly accessing the new incoming state after drm_atomic_helper_commit_hw_done(). But this state might have already been superceeded by an !nonblock atomic update resulting in dereferencing an already free'd crtc_state. TODO I *think* this will more or less do the right thing.. althought I'm not 100% sure if, for example, we enter psr in a nonblock commit, and then leave psr in a !nonblock commit that overtakes the completion of the nonblock commit. Not sure if this sort of scenario can happen in practice. But not crashing is better than crashing, so I guess we should either take this patch or rever the self-refresh helpers until Sean can figure out a better solution. Fixes: d4da4e33341c ("drm: Measure Self Refresh Entry/Exit times to avoid thrashing") Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org> [seanpaul fixed up some checkpatch warns] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191104173737.142558-1-robdclark@gmail.com
2019-11-05drm/i915/gen8+: Add RC6 CTX corruption WAImre Deak6-4/+135
In some circumstances the RC6 context can get corrupted. We can detect this and take the required action, that is disable RC6 and runtime PM. The HW recovers from the corrupted state after a system suspend/resume cycle, so detect the recovery and re-enable RC6 and runtime PM. v2: rebase (Mika) v3: - Move intel_suspend_gt_powersave() to the end of the GEM suspend sequence. - Add commit message. v4: - Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API change. v5: rebased on gem/gt split (Mika) Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
2019-11-05drm/i915: Lower RM timeout to avoid DSI hard hangsUma Shankar2-0/+12
In BXT/APL, device 2 MMIO reads from MIPI controller requires its PLL to be turned ON. When MIPI PLL is turned off (MIPI Display is not active or connected), and someone (host or GT engine) tries to read MIPI registers, it causes hard hang. This is a hardware restriction or limitation. Driver by itself doesn't read MIPI registers when MIPI display is off. But any userspace application can submit unprivileged batch buffer for execution. In that batch buffer there can be mmio reads. And these reads are allowed even for unprivileged applications. If these register reads are for MIPI DSI controller and MIPI display is not active during that time, then the MMIO read operation causes system hard hang and only way to recover is hard reboot. A genuine process/application won't submit batch buffer like this and doesn't cause any issue. But on a compromised system, a malign userspace process/app can generate such batch buffer and can trigger system hard hang (denial of service attack). The fix is to lower the internal MMIO timeout value to an optimum value of 950us as recommended by hardware team. If the timeout is beyond 1ms (which will hit for any value we choose if MMIO READ on a DSI specific register is performed without PLL ON), it causes the system hang. But if the timeout value is lower than it will be below the threshold (even if timeout happens) and system will not get into a hung state. This will avoid a system hang without losing any programming or GT interrupts, taking the worst case of lowest CDCLK frequency and early DC5 abort into account. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
2019-11-05drm/i915/cmdparser: Ignore Length operands during command matchingJon Bloomfield1-1/+1
Some of the gen instruction macros (e.g. MI_DISPLAY_FLIP) have the length directly encoded in them. Since these are used directly in the tables, the Length becomes part of the comparison used for matching during parsing. Thus, if the cmd being parsed has a different length to that in the table, it is not matched and the cmd is accepted via the default variable length path. Fix by masking out everything except the Opcode in the cmd tables Cc: Tony Luck <tony.luck@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
2019-11-05drm/i915/cmdparser: Add support for backward jumpsJon Bloomfield5-26/+178
To keep things manageable, the pre-gen9 cmdparser does not attempt to track any form of nested BB_START's. This did not prevent usermode from using nested starts, or even chained batches because the cmdparser is not strictly enforced pre gen9. Instead, the existence of a nested BB_START would cause the batch to be emitted in insecure mode, and any privileged capabilities would not be available. For Gen9, the cmdparser becomes mandatory (for BCS at least), and so not providing any form of nested BB_START support becomes overly restrictive. Any such batch will simply not run. We make heavy use of backward jumps in igt, and it is much easier to add support for this restricted subset of nested jumps, than to rewrite the whole of our test suite to avoid them. Add the required logic to support limited backward jumps, to instructions that have already been validated by the parser. Note that it's not sufficient to simply approve any BB_START that jumps backwards in the buffer because this would allow an attacker to embed a rogue instruction sequence within the operand words of a harmless instruction (say LRI) and jump to that. We introduce a bit array to track every instr offset successfully validated, and test the target of BB_START against this. If the target offset hits, it is re-written to the same offset in the shadow buffer and the BB_START cmd is allowed. Note: This patch deliberately ignores checkpatch issues in the cmdtables, in order to match the style of the surrounding code. We'll correct the entire file in one go in a later patch. v2: set dispatch secure late (Mika) v3: rebase (Mika) v4: Clear whitelist on each parse Minor review updates (Chris) v5: Correct backward jump batching v6: fix compilation error due to struct eb shuffle (Mika) Cc: Tony Luck <tony.luck@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
2019-11-05drm/i915/cmdparser: Use explicit goto for error pathsJon Bloomfield1-12/+13
In the next patch we will be adding a second valid termination condition which will require a small amount of refactoring to share logic with the BB_END case. Refactor all error conditions to jump to a dedicated exit path, with 'break' reserved only for a successful parse. Cc: Tony Luck <tony.luck@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
2019-11-05drm/i915: Add gen9 BCS cmdparsingJon Bloomfield2-10/+110
For gen9 we enable cmdparsing on the BCS ring, specifically to catch inadvertent accesses to sensitive registers Unlike gen7/hsw, we use the parser only to block certain registers. We can rely on h/w to block restricted commands, so the command tables only provide enough info to allow the parser to delineate each command, and identify commands that access registers. Note: This patch deliberately ignores checkpatch issues in favour of matching the style of the surrounding code. We'll correct the entire file in one go in a later patch. v3: rebase (Mika) v4: Add RING_TIMESTAMP registers to whitelist (Jon) Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
2019-11-05drm/i915: Allow parsing of unsized batchesJon Bloomfield1-4/+5
In "drm/i915: Add support for mandatory cmdparsing" we introduced the concept of mandatory parsing. This allows the cmdparser to be invoked even when user passes batch_len=0 to the execbuf ioctl's. However, the cmdparser needs to know the extents of the buffer being scanned. Refactor the code to ensure the cmdparser uses the actual object size, instead of the incoming length, if user passes 0. Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tyler Hicks <tyhicks@canonical.com> Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
2019-11-05drm/i915: Support ro ppgtt mapped cmdparser shadow buffersJon Bloomfield3-18/+70
For Gen7, the original cmdparser motive was to permit limited use of register read/write instructions in unprivileged BB's. This worked by copying the user supplied bb to a kmd owned bb, and running it in secure mode, from the ggtt, only if the scanner finds no unsafe commands or registers. For Gen8+ we can't use this same technique because running bb's from the ggtt also disables access to ppgtt space. But we also do not actually require 'secure' execution since we are only trying to reduce the available command/register set. Instead we will copy the user buffer to a kmd owned read-only bb in ppgtt, and run in the usual non-secure mode. Note that ro pages are only supported by ppgtt (not ggtt), but luckily that's exactly what we need. Add the required paths to map the shadow buffer to ppgtt ro for Gen8+ v2: IS_GEN7/IS_GEN (Mika) v3: rebase v4: rebase v5: rebase Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
2019-11-05drm/i915: Add support for mandatory cmdparsingJon Bloomfield3-7/+15
The existing cmdparser for gen7 can be bypassed by specifying batch_len=0 in the execbuf call. This is safe because bypassing simply reduces the cmd-set available. In a later patch we will introduce cmdparsing for gen9, as a security measure, which must be strictly enforced since without it we are vulnerable to DoS attacks. Introduce the concept of 'required' cmd parsing that cannot be bypassed by submitting zero-length bb's. v2: rebase (Mika) v2: rebase (Mika) v3: fix conflict on engine flags (Mika) Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
2019-11-05drm/i915: Remove Master tables from cmdparserJon Bloomfield3-68/+26
The previous patch has killed support for secure batches on gen6+, and hence the cmdparsers master tables are now dead code. Remove them. Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tyler Hicks <tyhicks@canonical.com> Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
2019-11-05drm/i915: Disable Secure Batches for gen6+Jon Bloomfield3-3/+12
Retroactively stop reporting support for secure batches through the api for gen6+ so that older binaries trigger the fallback path instead. Older binaries use secure batches pre gen6 to access resources that are not available to normal usermode processes. However, all known userspace explicitly checks for HAS_SECURE_BATCHES before relying on the secure batch feature. Since there are no known binaries relying on this for newer gens we can kill secure batches from gen6, via I915_PARAM_HAS_SECURE_BATCHES. v2: rebase (Mika) v3: rebase (Mika) Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
2019-11-05drm/i915: Rename gen7 cmdparser tablesJon Bloomfield1-35/+35
We're about to introduce some new tables for later gens, and the current naming for the gen7 tables will no longer make sense. v2: rebase Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
2019-11-04drm/i915/dp: Do not switch aux to TBT mode for non-TC portsJosé Roberto de Souza1-1/+5
Non-TC ports always have tc_mode == TC_PORT_TBT_ALT so it was switching aux to TBT mode for all combo-phy ports, happily this did not caused any issue but is better follow BSpec. Also this is reserved bit before ICL. Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Fixes: e9b7e1422d40 ("drm/i915: Sanitize the terminology used for TypeC port modes") Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191029011014.286885-1-jose.souza@intel.com (cherry picked from commit 49748264826ff4cc7f0ebbdd6b0d1a36b13b1cee) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-04drm/i915: Avoid HPD poll detect triggering a new detect cycleImre Deak3-0/+19
For the HPD interrupt functionality the HW depends on power wells in the display core domain to be on. Accordingly when enabling these power wells the HPD polling logic will force an HPD detection cycle to account for hotplug events that may have happened when such a power well was off. Thus a detect cycle started by polling could start a new detect cycle if a power well in the display core domain gets enabled during detect and stays enabled after detect completes. That in turn can lead to a detection cycle runaway. To prevent re-triggering a poll-detect cycle make sure we drop all power references we acquired during detect synchronously by the end of detect. This will let the poll-detect logic continue with polling (matching the off state of the corresponding power wells) instead of scheduling a new detection cycle. Fixes: 6cfe7ec02e85 ("drm/i915: Remove the unneeded AUX power ref from intel_dp_detect()") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112125 Reported-and-tested-by: Val Kulkov <val.kulkov@gmail.com> Reported-and-tested-by: wangqr <wqr.prg@gmail.com> Cc: Val Kulkov <val.kulkov@gmail.com> Cc: wangqr <wqr.prg@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191028181517.22602-1-imre.deak@intel.com (cherry picked from commit a8ddac7c9f06a12227a4f5febd1cbe0575a33179) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-01Merge tag 'drm-fixes-5.4-2019-10-30' of ↵Dave Airlie21-67/+165
git://people.freedesktop.org/~agd5f/linux into drm-fixes drm-fixes-5.4-2019-10-30: amdgpu: - clang fixes - Updated golden settings - GPUVM fixes for navi - Navi sdma fix - Navi display fixes - Freesync fix - Gamma fix for DCN - DP dongle detection fix - Fix for undervolting on vega10 radeon: - enable kexec fix for PPC scheduler: - set an error on fence if hw job failed Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191030162339.44366-1-alexander.deucher@amd.com
2019-11-01Merge tag 'drm-intel-fixes-2019-10-31' of ↵Dave Airlie4-7/+25
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix PCH reference clock for FDI on HSW/BDW which was causing users blank screen - Small documentation fix for TGL display PLLs Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191031171209.GA6586@intel.com
2019-11-01Merge tag 'drm-misc-fixes-2019-10-30-1' of ↵Dave Airlie4-9/+14
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - three fixes for panfrost, one to silence a warning, one to fix runtime_pm and one to prevent bogus pointer dereferences - one fix for a memleak in v3d Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191030182207.evrscl7lnv42u5zu@hendrix
2019-11-01Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux ↵Dave Airlie3-7/+20
into drm-fixes One memory corruption fix in the MMUv2 GPU coredump code, a deadlock fix also in the coredump code and reintroduction of a helpful message, which got dropped by accident in this cycle. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/b0d640267662e3ce5e0089d0afedc1baba55058d.camel@pengutronix.de
2019-10-30drm/amdgpu: enable -msse2 for GCC 7.1+ usersNick Desaulniers5-15/+5
A final attempt at enabling sse2 for GCC users. Orininally attempted in: commit 10117450735c ("drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines") Reverted due to "reported instability" in: commit 193392ed9f69 ("Revert "drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines"") Re-added just for Clang in: commit 0f0727d971f6 ("drm/amd/display: readd -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines") The original report didn't have enough information to know if the GPF was due to misalignment, but I suspect that it was. (The missing information was the disassembly of the function at the bottom of the trace, to see if the instruction pointer pointed to an instruction with 16B alignment memory operand requirements. The stack trace does show the stack was only 8B but not 16B aligned though, which makes this a strong possibility). Now that the stack misalignment issue has been fixed for users of GCC 7.1+, reattempt adding -msse2. This matches Clang. It will likely never be safe to enable this for pre-GCC 7.1 AND use a 16B aligned stack in these translation units. This is only a functional change for GCC 7.1+ users, and should be boot tested. Link: https://bugs.freedesktop.org/show_bug.cgi?id=109487 Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-30drm/amdgpu: fix stack alignment ABI mismatch for GCC 7.1+Nick Desaulniers5-0/+45
GCC earlier than 7.1 errors when compiling code that makes use of `double`s and sets a stack alignment outside of the range of [2^4-2^12]: $ cat foo.c double foo(double x, double y) { return x + y; } $ gcc-4.9 -mpreferred-stack-boundary=3 foo.c error: -mpreferred-stack-boundary=3 is not between 4 and 12 This is likely why the AMDGPU driver was ever compiled with a different stack alignment (and thus different ABI) than the rest of the x86 kernel. The kernel uses 8B stack alignment, while the driver was using 16B stack alignment in a few places. Since GCC 7.1+ doesn't error, fix the ABI mismatch for users of newer versions of GCC. There was discussion about whether to mark the driver broken or not for users of GCC earlier than 7.1, but since the driver currently is working, don't explicitly break the driver for them here. Relying on differing stack alignment is unspecified behavior, and brittle, and may break in the future. This patch is no functional change for GCC users earlier than 7.1. It's been compile tested on GCC 4.9 and 8.3 to check the correct flags. It should be boot tested when built with GCC 7.1+. -mincoming-stack-boundary= or -mstackrealign may help keep this code building for pre-GCC 7.1 users. The version check for GCC is broken into two conditionals, both because cc-ifversion is currently GCC specific, and it simplifies a subsequent patch. Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-16 13:35:13 +0000