summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm
AgeCommit message (Collapse)AuthorFilesLines
2021-09-19Revert "drm/vc4: hdmi: Remove drm_encoder->crtc usage"Linus Torvalds1-27/+13
This reverts commit 27da370e0fb343a0baf308f503bb3e5dcdfe3362. Sudip Mukherjee reports that this broke pulseaudio with a NULL pointer dereference in vc4_hdmi_audio_prepare(), bisected it to this commit, and confirmed that a revert fixed the problem. Revert the problematic commit until fixed. Link: https://lore.kernel.org/all/CADVatmPB9-oKd=ypvj25UYysVo6EZhQ6bCM7EvztQBMyiZfAyw@mail.gmail.com/ Link: https://lore.kernel.org/all/CADVatmN5EpRshGEPS_JozbFQRXg5w_8LFB3OMP1Ai-ghxd3w4g@mail.gmail.com/ Reported-and-tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Emma Anholt <emma@anholt.net> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-19Revert drm/vc4 hdmi runtime PM changesLinus Torvalds1-34/+10
This reverts commits 9984d6664ce9 ("drm/vc4: hdmi: Make sure the controller is powered in detect") 411efa18e4b0 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm") as Michael Stapelberg reports that the new runtime PM changes cause his Raspberry Pi 3 to hang on boot, probably due to interactions with other changes in the DRM tree (because a bisect points to the merge in commit e058a84bfddc: "Merge tag 'drm-next-2021-07-01' of git://.../drm"). Revert these two commits until it's been resolved. Link: https://lore.kernel.org/all/871r5mp7h2.fsf@midna.i-did-not-set--mail-host-address--so-tickle-me/ Reported-and-tested-by: Michael Stapelberg <michael@stapelberg.ch> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-16Merge tag 'drm-fixes-2021-09-17' of git://anongit.freedesktop.org/drm/drmLinus Torvalds51-218/+945
Pull drm fixes from Dave Airlie: "Slightly busier than usual rc2, but mostly scattered amdgpu fixes, some i915 and etnaviv resolves an MMU/runtime PM blowup. amdgpu: - UBSAN fix - Powerplay table update fix - Fix use after free in BO moves - Debugfs init fixes - vblank workqueue fixes for headless devices - FPU fixes - sysfs_emit fixes - SMU updates for cyan skillfish - Backlight fixes when DMCU is not initialized - DP MST fixes - HDCP compliance fix - Link training fix - Runtime pm fix - Panel orientation fixes - Display GPUVM fix for yellow carp - Add missing license amdkfd: - Drop PCI atomics requirement if proper firmware is available - Suspend/resume fixes for IOMMUv2 cases radeon: - AGP fix i915: - Propagate DP link training error returns - Use max link params for eDP 1.3 and earlier - Build warning fixes - Gem selftest fixes - Ensure wakeref is held before hardware access etnaviv: - MMU context vs runtime PM fix" * tag 'drm-fixes-2021-09-17' of git://anongit.freedesktop.org/drm/drm: (44 commits) drm/amdgpu/display: add a proper license to dc_link_dp.c drm/amd/display: Fix white screen page fault for gpuvm amd/display: enable panel orientation quirks drm/amdgpu: Demote TMZ unsupported log message from warning to info drm/amdgpu: Drop inline from amdgpu_ras_eeprom_max_record_count drm/amd/pm: fix runpm hang when amdgpu loaded prior to sound driver drm/radeon: pass drm dev radeon_agp_head_init directly drm/amdgpu: move iommu_resume before ip init/resume drm/amdgpu: add amdgpu_amdkfd_resume_iommu drm/amdkfd: separate kfd_iommu_resume from kfd_resume drm/amd/display: Link training retry fix for abort case drm/amd/display: Fix unstable HPCP compliance on Chrome Barcelo drm/amd/display: dsc mst 2 4K displays go dark with 2 lane HBR3 drm/amd/display: Get backlight from PWM if DMCU is not initialized drm/amdkfd: make needs_pcie_atomics FW-version dependent drm/amdgpu: add manual sclk/vddc setting support for cyan skilfish(v3) drm/amdgpu: add some pptable funcs for cyan skilfish(v3) drm/amdgpu: update SMU driver interface for cyan skilfish(v3) drm/amdgpu: update SMU PPSMC for cyan skilfish drm/amdgpu: fix sysfs_emit/sysfs_emit_at warnings(v2) ...
2021-09-17Merge tag 'amd-drm-fixes-5.15-2021-09-16' of ↵Dave Airlie34-169/+858
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.15-2021-09-16: amdgpu: - UBSAN fix - Powerplay table update fix - Fix use after free in BO moves - Debugfs init fixes - vblank workqueue fixes for headless devices - FPU fixes - sysfs_emit fixes - SMU updates for cyan skillfish - Backlight fixes when DMCU is not initialized - DP MST fixes - HDCP compliance fix - Link training fix - Runtime pm fix - Panel orientation fixes - Display GPUVM fix for yellow carp - Add missing license amdkfd: - Drop PCI atomics requirement if proper firmware is available - Suspend/resume fixes for IOMMUv2 cases radeon: - AGP fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210916140611.59816-1-alexander.deucher@amd.com
2021-09-17Merge tag 'drm-intel-fixes-2021-09-16' of ↵Dave Airlie8-24/+42
ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes drm/i915 fixes for v5.15-rc2: - Propagate DP link training error returns - Use max link params for eDP 1.3 and earlier - Build warning fixes - Gem selftest fixes - Ensure wakeref is held before hardware access Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8735q4wsu7.fsf@intel.com
2021-09-16drm/rockchip: cdn-dp-core: Make cdn_dp_core_resume __maybe_unusedArnd Bergmann1-1/+1
With the new static annotation, the compiler warns when the functions are actually unused: drivers/gpu/drm/rockchip/cdn-dp-core.c:1123:12: error: 'cdn_dp_resume' defined but not used [-Werror=unused-function] 1123 | static int cdn_dp_resume(struct device *dev) | ^~~~~~~~~~~~~ Mark them __maybe_unused to suppress that warning as well. [ Not so 'new' static annotations any more, and I removed the part of the patch that added __maybe_unused to cdn_dp_suspend(), because it's used by the shutdown/remove code. So only the resume function ends up possibly unused if CONFIG_PM isn't set - Linus ] Fixes: 7c49abb4c2f8 ("drm/rockchip: cdn-dp-core: Make cdn_dp_core_suspend/resume static") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-16drm/amdgpu/display: add a proper license to dc_link_dp.cAlex Deucher1-1/+23
Was missing. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: Fix white screen page fault for gpuvmNicholas Kazlauskas1-0/+2
[Why] The "base_addr_is_mc_addr" field was added for dcn3.1 support but pa_config was never updated to set it to false. Uninitialized memory causes it to be set to true which results in address mistranslation and white screen. [How] Use memset to ensure all fields are initialized to 0 by default. Fixes: 64b1d0e8d500 ("drm/amd/display: Add DCN3.1 HWSEQ") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-09-16amd/display: enable panel orientation quirksSimon Ser1-0/+28
This patch allows panel orientation quirks from DRM core to be used. They attach a DRM connector property "panel orientation" which indicates in which direction the panel has been mounted. Some machines have the internal screen mounted with a rotation. Since the panel orientation quirks need the native mode from the EDID, check for it in amdgpu_dm_connector_ddc_get_modes. Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amdgpu: Demote TMZ unsupported log message from warning to infoPaul Menzel1-1/+1
As the user cannot do anything about the unsupported Trusted Memory Zone (TMZ) feature, do not warn about it, but make it informational, so demote the log level from warning to info. Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amdgpu: Drop inline from amdgpu_ras_eeprom_max_record_countMichel Dänzer2-2/+2
This was unusual; normally, inline functions are declared static as well, and defined in a header file if used by multiple compilation units. The latter would be more involved in this case, so just drop the inline declaration for now. Fixes compile failure building for ppc64le on RHEL 8: In file included from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h:32, from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:33: ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_recovery_init’: ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.h:90:17: error: inlining failed in call to ‘always_inline’ ‘amdgpu_ras_eeprom_max_record_count’: function body not available 90 | inline uint32_t amdgpu_ras_eeprom_max_record_count(void); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1985:34: note: called from here 1985 | max_eeprom_records_len = amdgpu_ras_eeprom_max_record_count(); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: c84d46707ebb "drm/amdgpu: validate bad page threshold in ras(v3)" Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/pm: fix runpm hang when amdgpu loaded prior to sound driverEvan Quan4-4/+47
Current RUNPM mechanism relies on PMFW to master the timing for BACO in/exit. And that needs cooperation from sound driver for dstate change notification for function 1(audio). Otherwise(on sound driver missing), BACO cannot be kicked in correctly and hang will be observed on RUNPM exit. By switching back to legacy message way on sound driver missing, we are able to fix the runpm hang observed for the scenario below: amdgpu driver loaded -> runpm suspend kicked -> sound driver loaded Signed-off-by: Evan Quan <evan.quan@amd.com> Reported-and-tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-09-16drm/radeon: pass drm dev radeon_agp_head_init directlyNirmoy Das1-1/+1
Pass drm dev directly as rdev->ddev gets initialized later on at radeon_device_init(). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214375 Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-09-16drm/amdgpu: move iommu_resume before ip init/resumeJames Zhu1-0/+12
Separate iommu_resume from kfd_resume, and move it before other amdgpu ip init/resume. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277 Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-09-16drm/amdgpu: add amdgpu_amdkfd_resume_iommuJames Zhu2-0/+11
Add amdgpu_amdkfd_resume_iommu for amdgpu. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277 Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-09-16drm/amdkfd: separate kfd_iommu_resume from kfd_resumeJames Zhu2-4/+14
Separate kfd_iommu_resume from kfd_resume for fine-tuning of amdgpu device init/resume/reset/recovery sequence. v2: squash in fix for !CONFIG_HSA_AMD Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277 Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-09-16drm/amd/display: Link training retry fix for abort caseMeenakshikumar Somasundaram1-3/+7
[Why] If link training is aborted, it shall be retried if sink is present. [How] Check hpd status to find out whether sink is present or not. If sink is present, then link training shall be tried again with same settings. Otherwise, link training shall be aborted. Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: Fix unstable HPCP compliance on Chrome BarceloQingqing Zhuo1-2/+20
[Why] Intermittently, there presents two occurrences of 0 stream commits in a single HPD event. Current HDCP sequence does not consider such scenerio, and will thus disable HDCP. [How] Add condition check to include stream remove and re-enable case for HDCP enable. Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: dsc mst 2 4K displays go dark with 2 lane HBR3Hersen Wu3-17/+34
[Why] call stack of amdgpu dsc mst pbn, slot num calculation is as below: -compute_bpp_x16_from_target_bandwidth -decide_dsc_target_bpp_x16 -setup_dsc_config -dc_dsc_compute_bandwidth_range -compute_mst_dsc_configs_for_link -compute_mst_dsc_configs_for_state from pbn -> dsc target bpp_x16 bpp_x16 is calulated by compute_bpp_x16_from_target_bandwidth. Beside pixel clock and bpp, num_slices_h and bpp_increment_div will also affect bpp_x16. from dsc target bpp_x16 -> pbn within dm_update_mst_vcpi_slots_for_dsc, pbn = drm_dp_calc_pbn_mode(clock, bpp_x16, true); drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc) { return DIV_ROUND_UP_ULL(mul_u32_u32(clock * (bpp / 16), 64 * 1006), 8 * 54 * 1000 * 1000); } bpp / 16 trunc digits after decimal point. This will cause calculation delta. drm_dp_calc_pbn_mode does not have other informations, like num_slices_h, bpp_increment_div. therefore, it does not do revese calcuation properly from bpp_x16 to pbn. pbn from drm_dp_calc_pbn_mode is less than pbn from compute_mst_dsc_configs_for_state. This cause not enough mst slot allocated to display. display could not visually light up. [How] pass pbn from compute_mst_dsc_configs_for_state to dm_update_mst_vcpi_slots_for_dsc Cc: stable@vger.kernel.org Reviewed-by: Scott Foster <Scott.Foster@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Hersen Wu <hersenwu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: Get backlight from PWM if DMCU is not initializedHarry Wentland2-14/+12
On Carrizo/Stoney systems we set backlight through panel_cntl, i.e. directly via the PWM registers, if DMCU is not initialized. We always read it back through ABM registers which leads to a mismatch and forces atomic_commit to program the backlight each time. Instead make sure we use the same logic for backlight readback, i.e. read it from panel_cntl if DMCU is not initialized. We also need to remove some extraneous and incorrect calculations at the end of dce_get_16_bit_backlight_from_pwm. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1666 Cc: stable@vger.kernel.org Reviewed-by: Josip Pavic <josip.pavic@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amdkfd: make needs_pcie_atomics FW-version dependentFelix Kuehling2-16/+29
On some GPUs the PCIe atomic requirement for KFD depends on the MEC firmware version. Add a firmware version check for this. The minimum firmware version that works without atomics can be updated in the device_info structure for each GPU type. Move PCIe atomic detection from kgd2kfd_probe into kgd2kfd_device_init because the MEC firmware is not loaded yet at the probe stage. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amdgpu: add manual sclk/vddc setting support for cyan skilfish(v3)Lang Yu2-1/+138
Add manual sclk/vddc setting supoort via pp_od_clk_voltage sysfs to maintain consistency with other asics. As cyan skillfish doesn't support DPM, there is only a single frequency and voltage to adjust. v2: maintain consistency and add command guide. v3: adjust user settings storage and coding style. Command guide: echo vc point sclk vddc > pp_od_clk_voltage "vc" - sclk voltage curve "point" - must be 0 "sclk" - target value of sclk(MHz), should be in safe range "vddc" - target value of vddc(mV), a 6.25(mV) stepping is recommended and should be in safe range (the real vddc is an approximation of target value) echo c > pp_od_clk_voltage "c" - commit the changes of sclk and vddc, only after the commit command, the target values set by "vc" command will take effect echo r > pp_od_clk_voltage "r" - reset sclk and vddc to default value, a subsequent commit command is needed to take effect Example: 1) Check default sclk and vddc $ cat pp_od_clk_voltage OD_SCLK: 0: 1800Mhz * OD_VDDC: 0: 862mV * OD_RANGE: SCLK: 1000Mhz 2000Mhz VDDC: 700mV 1129mV 2) Set sclk to 1500MHz and vddc to 700mV $ echo vc 0 1500 700 > pp_od_clk_voltage $ echo c > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 1500Mhz * OD_VDDC: 0: 693mV * OD_RANGE: SCLK: 1000Mhz 2000Mhz VDDC: 700mV 1129mV 3) Reset sclk and vddc to default $ echo r > pp_od_clk_voltage $ echo c > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 1800Mhz * OD_VDDC: 0: 874mV * OD_RANGE: SCLK: 1000Mhz 2000Mhz VDDC: 700mV 1129mV NOTE: We don't specify an explicit safe range, you can set any values between min and max at your own risk. Enjoy! Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amdgpu: add some pptable funcs for cyan skilfish(v3)Lang Yu1-0/+347
Add print_clk_levels and read_sensor pptable funcs for cyan skilfish. v2: keep consitency and add get_gpu_metrics callback. v3: use sysfs_emit_at() in sysfs show function. Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amdgpu: update SMU driver interface for cyan skilfish(v3)Lang Yu1-51/+35
Add SmuMetrics_t definition for cyan skilfish. v2: update SmuMetrics_t definition. v3: cleanup and rearrange the order of fields. Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amdgpu: update SMU PPSMC for cyan skilfishLang Yu1-1/+8
Add some PPSMC MSGs for cyan skilfish. Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amdgpu: fix sysfs_emit/sysfs_emit_at warnings(v2)Lang Yu8-16/+49
sysfs_emit and sysfs_emit_at requrie a page boundary aligned buf address. Make them happy! v2: use an inline function. Warning Log: [ 492.545174] invalid sysfs_emit_at: buf:00000000f19bdfde at:0 [ 492.546416] WARNING: CPU: 7 PID: 1304 at fs/sysfs/file.c:765 sysfs_emit_at+0x4a/0xa0 [ 492.654805] Call Trace: [ 492.655353] ? smu_cmn_get_metrics_table+0x40/0x50 [amdgpu] [ 492.656780] vangogh_print_clk_levels+0x369/0x410 [amdgpu] [ 492.658245] vangogh_common_print_clk_levels+0x77/0x80 [amdgpu] [ 492.659733] ? preempt_schedule_common+0x18/0x30 [ 492.660713] smu_print_ppclk_levels+0x65/0x90 [amdgpu] [ 492.662107] amdgpu_get_pp_od_clk_voltage+0x13d/0x190 [amdgpu] [ 492.663620] dev_attr_show+0x1d/0x40 Signed-off-by: Lang Yu <lang.yu@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: dc_assert_fp_enabled assert only if FPU is not enabledAnson Jacob1-1/+1
Assert only when FPU is not enabled. Fixes: 0ea7ee821701 ("drm/amd/display: Add DC_FP helper to check FPU state") Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: Add NULL checks for vblank workqueueNicholas Kazlauskas1-14/+18
[Why] If we're running a headless config with 0 links then the vblank workqueue will be NULL - causing a NULL pointer exception during any commit. [How] Guard access to the workqueue if it's NULL and don't queue or flush work if it is. Reported-by: Mike Lothian <mike@fireburn.co.uk> BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1700 Fixes: 58aa1c50e5a231 ("drm/amd/display: Use vblank control events for PSR enable/disable") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/etnaviv: add missing MMU context put when reaping MMU mappingLucas Stach1-0/+1
When we forcefully evict a mapping from the the address space and thus the MMU context, the MMU context is leaked, as the mapping no longer points to it, so it doesn't get freed when the GEM object is destroyed. Add the mssing context put to fix the leak. Cc: stable@vger.kernel.org # 5.4 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Michael Walle <michael@walle.cc> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2021-09-16drm/etnaviv: reference MMU context when setting up hardware stateLucas Stach3-12/+24
Move the refcount manipulation of the MMU context to the point where the hardware state is programmed. At that point it is also known if a previous MMU state is still there, or the state needs to be reprogrammed with a potentially different context. Cc: stable@vger.kernel.org # 5.4 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Michael Walle <michael@walle.cc> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2021-09-16drm/etnaviv: fix MMU context leak on GPU resetLucas Stach1-0/+2
After a reset the GPU is no longer using the MMU context and may be restarted with a different context. While the mmu_state proeprly was cleared, the context wasn't unreferenced, leading to a memory leak. Cc: stable@vger.kernel.org # 5.4 Reported-by: Michael Walle <michael@walle.cc> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Michael Walle <michael@walle.cc> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2021-09-16drm/etnaviv: exec and MMU state is lost when resetting the GPULucas Stach1-3/+2
When the GPU is reset both the current exec state, as well as all MMU state is lost. Move the driver side state tracking into the reset function to keep hardware and software state from diverging. Cc: stable@vger.kernel.org # 5.4 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Michael Walle <michael@walle.cc> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2021-09-16drm/etnaviv: keep MMU context across runtime suspend/resumeLucas Stach1-3/+3
The MMU state may be kept across a runtime suspend/resume cycle, as we avoid a full hardware reset to keep the latency of the runtime PM small. Don't pretend that the MMU state is lost in driver state. The MMU context is pushed out when new HW jobs with a different context are coming in. The only exception to this is when the GPU is unbound, in which case we need to make sure to also free the last active context. Cc: stable@vger.kernel.org # 5.4 Reported-by: Michael Walle <michael@walle.cc> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Michael Walle <michael@walle.cc> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2021-09-16drm/etnaviv: stop abusing mmu_context as FE running markerLucas Stach2-2/+9
While the DMA frontend can only be active when the MMU context is set, the reverse isn't necessarily true, as the frontend can be stopped while the MMU state is kept. Stop treating mmu_context being set as a indication that the frontend is running and instead add a explicit property. Cc: stable@vger.kernel.org # 5.4 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Michael Walle <michael@walle.cc> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2021-09-16drm/etnaviv: put submit prev MMU context when it existsLucas Stach1-0/+2
The prev context is the MMU context at the time of the job queueing in hardware. As a job might be queued multiple times due to recovery after a GPU hang, we need to make sure to put the stale prev MMU context from a prior queuing, to avoid the reference and thus the MMU context leaking. Cc: stable@vger.kernel.org # 5.4 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Michael Walle <michael@walle.cc> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2021-09-16drm/etnaviv: return context from etnaviv_iommu_context_getLucas Stach5-11/+8
Being able to have the refcount manipulation in an assignment makes it much easier to parse the code. Cc: stable@vger.kernel.org # 5.4 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Michael Walle <michael@walle.cc> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2021-09-14drm/ttm: fix type mismatch error on sparc64Huang Rui1-1/+2
On sparc64, __fls() returns an "int", but the drm TTM code expected it to be "unsigned long" as on x86. As a result, on sparc (and arc, and m68k) you get build errors because 'min()' checks that the types match. As suggested by Linus, it can use min_t instead of min to force the type to be "unsigned int". Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-14drm/amdgpu: use IS_ERR for debugfs APIsNirmoy Das2-8/+6
debugfs APIs returns encoded error so use IS_ERR for checking return value. v2: return PTR_ERR(ent) References: https://gitlab.freedesktop.org/drm/amd/-/issues/1686 Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-By: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-09-14amd/display: downgrade validation failure log levelSimon Ser1-1/+2
In amdgpu_dm_atomic_check, dc_validate_global_state is called. On failure this logs a warning to the kernel journal. However warnings shouldn't be used for atomic test-only commit failures: user-space might be perfoming a lot of atomic test-only commits to find the best hardware configuration. Downgrade the log to a regular DRM atomic message. While at it, use the new device-aware logging infrastructure. This fixes error messages in the kernel when running gamescope [1]. [1]: https://github.com/Plagman/gamescope/issues/245 Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amdgpu: fix use after free during BO moveChristian König1-9/+9
The memory backing old_mem is already freed at that point, move the check a bit more up. Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: bfa3357ef9ab ("drm/ttm: allocate resource object instead of embedding it v2") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1699 Acked-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-09-14drm/amd/pm: fix the issue of uploading powerplay tableKenneth Feng1-1/+1
fix the issue of uploading powerplay table due to the dependancy of rlc. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-09-14drm/amd/amdgpu: Increase HWIP_MAX_INSTANCE to 10Ernst Sjöstrand1-1/+1
Seems like newer cards can have even more instances now. Found by UBSAN: array-index-out-of-bounds in drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:318:29 index 8 is out of range for type 'uint32_t *[8]' Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1697 Cc: stable@vger.kernel.org Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/i915: Enable -Wsometimes-uninitializedNathan Chancellor1-1/+0
This warning helps catch uninitialized variables. It should have been enabled at the same time as commit b2423184ac33 ("drm/i915: Enable -Wuninitialized") but I did not realize they were disabled separately. Enable it now that i915 is clean so that it stays that way. Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210824225427.2065517-4-nathan@kernel.org (cherry picked from commit 43192617f7816bb74584c1df06f57363afd15337) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-09-14drm/i915/selftests: Always initialize err in ↵Nathan Chancellor1-0/+2
igt_dmabuf_import_same_driver_lmem() Clang warns: drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:127:13: warning: variable 'err' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] } else if (PTR_ERR(import) != -EOPNOTSUPP) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:138:9: note: uninitialized use occurs here return err; ^~~ drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:127:9: note: remove the 'if' if its condition is always true } else if (PTR_ERR(import) != -EOPNOTSUPP) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:95:9: note: initialize the variable 'err' to silence this warning int err; ^ = 0 The test is expected to pass if i915_gem_prime_import() returns -EOPNOTSUPP so initialize err to zero in this case. Fixes: cdb35d1ed6d2 ("drm/i915/gem: Migrate to system at dma-buf attach time (v7)") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210824225427.2065517-3-nathan@kernel.org (cherry picked from commit 46f20a353b80d02492655d99714f0566018a17e8) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-09-14drm/i915/selftests: Do not use import_obj uninitializedNathan Chancellor1-3/+2
Clang warns a couple of times: drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:63:6: warning: variable 'import_obj' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (import != &obj->base) { ^~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:80:22: note: uninitialized use occurs here i915_gem_object_put(import_obj); ^~~~~~~~~~ drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:63:2: note: remove the 'if' if its condition is always false if (import != &obj->base) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c:38:46: note: initialize the variable 'import_obj' to silence this warning struct drm_i915_gem_object *obj, *import_obj; ^ = NULL Shuffle the import_obj initialization above these if statements so that it is not used uninitialized. Fixes: d7b2cb380b3a ("drm/i915/gem: Correct the locking and pin pattern for dma-buf (v8)") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210824225427.2065517-2-nathan@kernel.org (cherry picked from commit 4796054b381a586f4177a24e3d8b5a6a0a32ce62) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-09-14drm/i915: Get PM ref before accessing HW registerVinay Belgaumkar1-1/+7
Seeing these errors when GT is likely in suspend state- "RPM wakelock ref not held during HW access" Ensure GT is awake before trying to access HW registers. Avoid reading the register if that is not the case. Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Fixes: 41e5c17ebfc2 ("drm/i915/guc/slpc: Sysfs hooks for SLPC") Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210907232704.12982-1-vinay.belgaumkar@intel.com (cherry picked from commit f25e3908b9cd4a3fe819e9bdcdde58f20bacb34c) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-09-14drm/i915: Release ctx->syncobj on final put, not on ctx closeDaniel Vetter1-3/+3
gem context refcounting is another exercise in least locking design it seems, where most things get destroyed upon context closure (which can race with anything really). Only the actual memory allocation and the locks survive while holding a reference. This tripped up Jason when reimplementing the single timeline feature in commit 00dae4d3d35d4f526929633b76e00b0ab4d3970d Author: Jason Ekstrand <jason@jlekstrand.net> Date: Thu Jul 8 10:48:12 2021 -0500 drm/i915: Implement SINGLE_TIMELINE with a syncobj (v4) We could fix the bug by holding ctx->mutex in execbuf and clear the pointer (again while holding the mutex) context_close, but it's cleaner to just make the context object actually invariant over its _entire_ lifetime. This way any other ioctl that's potentially racing, but holding a full reference, can still rely on ctx->syncobj being an immutable pointer. Which without this change, is not the case. Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Fixes: 00dae4d3d35d ("drm/i915: Implement SINGLE_TIMELINE with a syncobj (v4)") Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: "Thomas Hellström" <thomas.hellstrom@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-2-daniel.vetter@ffwll.ch (cherry picked from commit c238980efd3b35af70fc926066cf7440f50a97a9) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-09-14drm/i915/gem: Fix the mman selftestThomas Hellström1-6/+20
Using the I915_MMAP_TYPE_FIXED mmap type requires the TTM backend, so for that mmap type, use __i915_gem_object_create_user() instead of i915_gem_object_create_internal(), as we really want to tests objects mmap-able by user-space. This also means that the out-of-space error happens at object creation and returns -ENXIO rather than -ENOSPC, so fix the code up to expect that on out-of-offset-space errors. Finally only use I915_MMAP_TYPE_FIXED for LMEM and SMEM for now if testing on LMEM-capable devices. For stolen LMEM, we still take the same path as for integrated, as that haven't been moved over to TTM yet, and user-space should not be able to create out of stolen LMEM anyway. v2: - Check the presence of the obj->ops->mmap_offset callback rather than hardcoding the supported mmap regions in can_mmap() (Maarten Lankhorst) Fixes: 7961c5b60f23 ("drm/i915: Add TTM offset argument to mmap.") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210831122931.157536-1-thomas.hellstrom@linux.intel.com (cherry picked from commit 450cede7f3804ca7f8b3da210ebefa61c0958f22) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-09-14drm/i915/guc: drop guc_communication_enabledDaniele Ceraolo Spurio1-8/+3
The function is only used from within GEM_BUG_ON(), which is causing warnings with Wunneeded-internal-declaration in some builds. Since the function is a simple wrapper around a CT function, we can just call the CT function directly instead. Fixes: 1fb12c587152 ("drm/i915/guc: skip disabling CTBs before sanitizing the GuC") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210823163137.19770-1-daniele.ceraolospurio@intel.com (cherry picked from commit 5db1856781e45c9610f7652a19cc656b984235e7) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-09-14drm/i915/dp: Use max params for panels < eDP 1.4Kai-Heng Feng1-1/+4
Users reported that after commit 2bbd6dba84d4 ("drm/i915: Try to use fast+narrow link on eDP again and fall back to the old max strategy on failure"), the screen starts to have wobbly effect. Commit a5c936add6a2 ("drm/i915/dp: Use slow and wide link training for everything") doesn't help either, that means the affected eDP 1.2 panels only work with max params. So use max params for panels < eDP 1.4 as Windows does to solve the issue. v3: - Do the eDP rev check in intel_edp_init_dpcd() v2: - Check eDP 1.4 instead of DPCD 1.1 to apply max params Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3714 Fixes: 2bbd6dba84d4 ("drm/i915: Try to use fast+narrow link on eDP again and fall back to the old max strategy on failure") Fixes: a5c936add6a2 ("drm/i915/dp: Use slow and wide link training for everything") Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210820075301.693099-1-kai.heng.feng@canonical.com (cherry picked from commit d7f213c131adf0bec8b731553eb82990cdac265d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 16:24:50 +0000