summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/virtio/virtgpu_fb.c
AgeCommit message (Collapse)AuthorFilesLines
2018-05-18drm/virtio: Place GEM BOs in drm_framebufferDaniel Stone1-4/+4
Since drm_framebuffer can now store GEM objects directly, place them there rather than in our own subclass. As this makes the framebuffer create_handle and destroy functions the same as the GEM framebuffer helper, we can reuse those. Signed-off-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Link: https://patchwork.freedesktop.org/patch/msgid/20180330141138.28987-3-daniels@collabora.com
2018-02-27drm/virtio: Replace 'unsigned' for 'unsigned int'Rodrigo Siqueira1-1/+1
This patch fixes the checkpatch.pl warning: drivers/gpu/drm/virtio/virtgpu_display.c:64: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' ... Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/ac9c4110785e6519801d44c57d4f05c3e0cdad53.1519343668.git.rodrigosiqueiramelo@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-27drm/virtio: Add blank line after variable declarationsRodrigo Siqueira1-0/+4
This patch fixes the checkpatch.pl warnings: virtgpu_drv.c:57: WARNING: Missing a blank line after declarations virtgpu_display.c:99: WARNING: Missing a blank line after declarations ... Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/41767852ff9dc584c825e32db6222b9a311603b9.1519343668.git.rodrigosiqueiramelo@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-08-09drm/virtio: make drm_fb_helper_funcs constBhumika Goyal1-1/+1
Make these structures const as they are only passed to the function drm_fb_helper_prepare and the corresponding argument is of type const. Done using Coccinelle @match disable optional_qualifier@ identifier s; @@ static struct drm_fb_helper_funcs s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ identifier match.s; expression e1,e2; position ref.p; @@ drm_fb_helper_prepare(e1,e2,&s@p,...) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct drm_fb_helper_funcs s; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502205245-17365-1-git-send-email-bhumirks@gmail.com
2017-07-26drm/<drivers>: Drop fbdev info flagsDaniel Vetter1-1/+0
- FBINFO_CAN_FORCE_OUTPUT has been a lie ever since we nerfed&removed the entire panic handling code in our fbdev emulation. We might restore kms panic output, but not through the bazillion of legacy code layers called fbdev/fbcon, there's just no way to make that work safely. - With the module check change FBINFO_DEFAULT is always 0, so can be removed too. That removes another change to cargo-cult stuff in kms drivers, yay! Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170706125735.28299-5-daniel.vetter@ffwll.ch Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-04-04drm: virtio: add virtio_gpu_translate_formatGerd Hoffmann1-56/+2
Factors out code, no functional change. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Laurent Vivier <lvivier@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170403070845.10793-2-kraxel@redhat.com
2017-02-07drm/fb-helper: Automatically clean up fb_infoDaniel Vetter1-4/+1
Noticed that everyone duplicates the same logic here and we could safe a few lines per driver. Yay for lots of drivers to make such tiny refactors worth-while! v2: Forgot to git add everything :( v3: Actually remove release_fbi (Sean, Emil, Chris) ... Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sean Paul <seanpaul@chromium.org> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170207161603.17611-1-daniel.vetter@ffwll.ch
2017-02-02drm: Rely on mode_config data for fb_helper initializationGabriel Krisman Bertazi1-1/+0
Instead of receiving the num_crts as a parameter, we can read it directly from the mode_config structure. I audited the drivers that invoke this helper and I believe all of them initialize the mode_config struct accordingly, prior to calling the fb_helper. I used the following coccinelle hack to make this transformation, except for the function headers and comment updates. The first and second rules are split because I couldn't find a way to remove the unused temporary variables at the same time I removed the parameter. // <smpl> @r@ expression A,B,D,E; identifier C; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ expression A,B,C,D,E; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ identifier r.C; type T; expression V; @@ - T C; <... when != C - C = V; ...> // </smpl> Changes since v1: - Rebased on top of the tip of drm-misc-next. - Remove mention to sti since a proper fix got merged. Suggested-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk
2017-01-27Merge branch 'master' of ↵Dave Airlie1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge Linus master to get the connector locking revert. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: (645 commits) sysctl: fix proc_doulongvec_ms_jiffies_minmax() Revert "drm/probe-helpers: Drop locking from poll_enable" MAINTAINERS: add Dan Streetman to zbud maintainers MAINTAINERS: add Dan Streetman to zswap maintainers mm: do not export ioremap_page_range symbol for external module mn10300: fix build error of missing fpu_save() romfs: use different way to generate fsid for BLOCK or MTD frv: add missing atomic64 operations mm, page_alloc: fix premature OOM when racing with cpuset mems update mm, page_alloc: move cpuset seqcount checking to slowpath mm, page_alloc: fix fast-path race with cpuset update or removal mm, page_alloc: fix check for NULL preferred_zone kernel/panic.c: add missing \n fbdev: color map copying bounds checking frv: add atomic64_add_unless() mm/mempolicy.c: do not put mempolicy before using its nodemask radix-tree: fix private list warnings Documentation/filesystems/proc.txt: add VmPin mm, memcg: do not retry precharge charges proc: add a schedule point in proc_pid_readdir() ...
2017-01-10drm/virtio: fix framebuffer sparse warningGerd Hoffmann1-1/+1
virtio uses normal ram as backing storage for the framebuffer, so we should assign the address to new screen_buffer (added by commit 17a7b0b4d9749f80d365d7baff5dec2f54b0e992) instead of screen_base. Reported-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-12-15drm: Nuke fb->bits_per_pixelVille Syrjälä1-1/+1
Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15drm: Nuke fb->depthVille Syrjälä1-1/+1
Replace uses of fb->depth with fb->format->depth. Less duplicate information is a good thing. @@ struct drm_framebuffer *fb; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - fb->depth = E; ... } @@ struct nouveau_framebuffer *fb; @@ - fb->base.depth + fb->base.format->depth @@ struct drm_framebuffer fb; @@ - fb.depth + fb.format->depth @@ struct drm_framebuffer *fb; @@ - fb->depth + fb->format->depth @@ struct drm_framebuffer fb; @@ - (fb.format->depth) + fb.format->depth @@ struct drm_framebuffer *fb; @@ - (fb->format->depth) + fb->format->depth @@ @@ struct drm_framebuffer { ... - unsigned int depth; ... }; v2: Drop the vmw stuff (Daniel) Rerun spatch due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1481751095-18249-1-git-send-email-ville.syrjala@linux.intel.com
2016-11-14drm/virtio: use DRM_FB_HELPER_DEFAULT_OPS for fb_opsStefan Christ1-7/+1
This patch removes a TODO comment in the code. I do not know whether it is still relevant. Cc: David Airlie <airlied@linux.ie> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Stefan Christ <contact@stefanchrist.eu> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-16-git-send-email-contact@stefanchrist.eu
2015-11-24drm: Remove unused fbdev_list membersLukas Wunner1-1/+0
I noticed that intel_fbdev->our_mode is unused. Introduced by 79e539453b34 ("DRM: i915: add mode setting support"). Then I noticed that intel_fbdev->fbdev_list is unused as well. Introduced by 386516744ba4 ("drm/fb: fix fbdev object model + cleanup properly.") in i915, nouveau and radeon. Subsequently cargo culted to amdgpu, ast, cirrus, qxl, udl, virtio and mgag200. Already removed from the latter with cc59487a05b1 ("drm/mgag200: 'fbdev_list' in 'struct mga_fbdev' is not used"). Remove it from the others. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-06drm/virtio: Use new drm_fb_helper functionsArchit Taneja1-23/+9
Use the newly created wrapper drm_fb_helper functions instead of calling core fbdev functions directly. They also simplify the fb_info creation. v3: - Don't touch remove_conflicting_framebuffers v2: - add missing header for virtgpu_fb.c Cc: David Airlie <airlied@linux.ie> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-11drm/virtio: checking for NULL instead of IS_ERRDan Carpenter1-2/+2
virtio_gpu_alloc_object() returns an error pointer, it never returns NULL. Fixes: dc5698e80cf7 ('Add virtio gpu driver.') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-03Add virtio gpu driver.Dave Airlie1-0/+431
This patch adds a kms driver for the virtio gpu. The xorg modesetting driver can handle the device just fine, the framebuffer for fbcon is there too. Qemu patches for the host side are under review currently. The pci version of the device comes in two variants: with and without vga compatibility. The former has a extra memory bar for the vga framebuffer, the later is a pure virtio device. The only concern for this driver is that in the virtio-vga case we have to kick out the firmware framebuffer. Initial revision has only 2d support, 3d (virgl) support requires some more work on the qemu side and will be added later. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-16 17:06:23 +0000