summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/vc4/vc4_hdmi_phy.c
AgeCommit message (Collapse)AuthorFilesLines
2022-03-24drm/vc4: hdmi: Rename pixel_rate variableMaxime Ripard1-1/+1
The pixel_rate field in the vc4_hdmi_connector_state struct actually stores the TMDS character rate, let's rename it for consistency. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-2-maxime@cerno.tech
2021-11-05drm/vc4: hdmi: Add a spinlock to protect register accessMaxime Ripard1-0/+37
The vc4 HDMI driver has multiple path shared between the CEC, ALSA and KMS frameworks, plus two interrupt handlers (CEC and hotplug) that will read and modify a number of registers. Even though not bug has been reported so far, it's definitely unsafe, so let's just add a spinlock to protect the register access of the HDMI controller. Link: https://lore.kernel.org/r/20211025141113.702757-5-maxime@cerno.tech Fixes: c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.") Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-12-16drm/vc4: hdmi: Use the connector state pixel rate for the PHYMaxime Ripard1-3/+5
The PHY initialisation parameters are not based on the pixel clock but the TMDS clock rate which can be the pixel clock in the standard case, but could be adjusted based on some parameters like the bits per color. Since the TMDS clock rate is stored in our custom connector state already, let's reuse it from there instead of computing it again. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-8-maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Support the BCM2711 HDMI controllersMaxime Ripard1-0/+481
Now that the driver is ready for it, let's bring in the HDMI controllers variants for the BCM2711. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/b540c7a9ebb7ad51da39271a8388b69c7e27e582.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add PHY RNG enable / disable functionMaxime Ripard1-0/+15
Let's continue the implementation of hooks for the parts that change in the BCM2711 SoC with the PHY RNG setup. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/216155f1c0b83e622ac60a2f7d00eb707de3acba.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add PHY init and disable functionMaxime Ripard1-0/+25
The HDMI PHY in the BCM2711 HDMI controller is significantly more complicated to setup than in the older BCM283x SoCs. Let's add hooks to enable and disable the PHY. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/7216826284dbc60a58bdacd662805d20699e5c80.1599120059.git-series.maxime@cerno.tech