summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/stm
AgeCommit message (Collapse)AuthorFilesLines
2022-08-03drm/gem: rename GEM CMA helpers to GEM DMA helpersDanilo Krummrich3-7/+7
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "GEM CMA", but not "FB CMA". Also drivers/gpu/drm/Makefile was fixed up manually after renaming drm_gem_cma_helper.c to drm_gem_dma_helper.c. This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
2022-08-03drm/fb: rename FB CMA helpers to FB DMA helpersDanilo Krummrich1-7/+7
Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "FB CMA", but not "GEM CMA". This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com
2022-08-03drm/fb: remove unused includes of drm_fb_cma_helper.hDanilo Krummrich1-1/+0
Quite a lot of drivers include the drm_fb_cma_helper.h header file without actually making use of it's provided API, hence remove those includes. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-2-dakr@redhat.com
2022-07-26drm: Remove unnecessary include statements of drm_plane_helper.hThomas Zimmermann1-1/+0
Remove the include statement for drm_plane_helper.h from all the files that don't need it. Althogh the header file is almost empty, many drivers include it somewhere. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-5-tzimmermann@suse.de
2022-07-05drm: Remove linux/media-bus-format.h from drm_crtc.hVille Syrjälä1-0/+1
drm_crtc.h has no need for linux/media-bus-format.h, so don't include it. Avoids useless rebuilds of the entire universe when touching linux/media-bus-format.h. Quite a few placs do currently depend on linux/media-bus-format.h without actually including it directly. All of those need to be fixed up. v2: Deal with ingenic as well v3: Fix up mxsfb and remaining parts of imx Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-4-ville.syrjala@linux.intel.com
2022-06-27drm/stm: ltdc: update hardware error managementYannick Fertre2-19/+77
The latest hardware version (0x40100) supports a hardware threshold register (aka FUTR) to trigger a fifo underrun interrupt. A software threshold has been implemented for other hardware versions. The threshold is set to 128 by default. Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220603134654.594373-1-yannick.fertre@foss.st.com
2022-06-27drm/stm: ltdc: add support of horizontal & vertical mirroringYannick Fertre2-56/+108
Support of vertical & horizontal mirroring features thanks to the plane rotation property. Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220603134547.593790-1-yannick.fertre@foss.st.com
2022-06-27drm/stm: ltdc: add support of the dynamic z-orderYannick Fertre3-3/+22
Zpos property is immutable for all hardware versions except the last version (0x40100) which support the blending order feature (dynamic z-order). Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220603134459.593379-1-yannick.fertre@foss.st.com
2022-06-27drm/stm: ltdc: fix various coding-style warningsYannick Fertre1-3/+2
Fix issues reported by checkpatch.pl: - Braces {} should be used on all arms - Blank lines Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Acked-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220603134334.592805-1-yannick.fertre@foss.st.com
2022-06-27drm/stm: ltdc: remove error message about scalingYannick Fertre1-1/+2
Remove error message about scaling & replace it by a debug message to avoid too much error. Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Acked-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220603134250.592408-1-yannick.fertre@foss.st.com
2022-06-27drm/stm: ltdc: disable all layers before crtc shutdownYannick Fertre1-0/+6
All plans must be disabled before the CRTC shutdown helping the crtc to restart from a clean situation (without unwanted planes already enable). Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220603134151.591997-1-yannick.fertre@foss.st.com
2022-06-20drm: Drop drm_blend.h from drm_crtc.hVille Syrjälä1-0/+1
drm_crtc.h has no need for drm_blend.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_blend.h. Quite a few placs do currently depend on drm_blend.h without actually including it directly. All of those need to be fixed up. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220613200317.11305-4-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-06-20drm: Drop drm_framebuffer.h from drm_crtc.hVille Syrjälä1-0/+1
drm_crtc.h has no need for drm_frambuffer.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_framebuffer.h. Quite a few placs do currently depend on drm_framebuffer.h without actually including it directly. All of those need to be fixed up. v2: Fix up msm some more v2: Deal with ingenic and shmobile as well Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-06-20drm: Drop drm_edid.h from drm_crtc.hVille Syrjälä1-0/+1
drm_crtc.h has no need for drm_edid.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_edid.h. Quite a few placs do currently depend on drm_edid.h without actually including it directly. All of those need to be fixed up. v2: Fix up i915 and msm some more v3: Fix alphabetical ordering (Sam) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-04-07stm: ltdc: fix two incorrect NULL checks on list iteratorXiaomeng Tong1-6/+10
The two bugs are here: if (encoder) { if (bridge && bridge->timings) The list iterator value 'encoder/bridge' will *always* be set and non-NULL by drm_for_each_encoder()/list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found. To fix the bug, use a new variable '*_iter' as the list iterator, while use the old variable 'encoder/bridge' as a dedicated pointer to point to the found element. Cc: stable@vger.kernel.org Fixes: 99e360442f223 ("drm/stm: Fix bus_flags handling") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Acked-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220327055355.3808-1-xiam0nd.tong@gmail.com
2022-02-25drm/stm: ltdc: add support for CRC hashing featureRaphael Gallais-Pou2-3/+104
This patch adds the CRC hashing feature supported by some recent hardware versions of the LTDC. This is useful for test suite such as IGT-GPU-tools [1] where a CRTC output frame can be compared to a test reference frame thanks to their respective CRC hash. [1] https://cgit.freedesktop.org/drm/igt-gpu-tools Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Acked-by: Yannick Fertre <yannick.fertre@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220211104620.421177-1-raphael.gallais-pou@foss.st.com
2022-02-25drm/stm: Avoid using val uninitialized in ltdc_set_ycbcr_config()Nathan Chancellor1-1/+2
Clang warns: drivers/gpu/drm/stm/ltdc.c:625:2: warning: variable 'val' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ drivers/gpu/drm/stm/ltdc.c:635:2: note: uninitialized use occurs here val |= LxPCR_YCEN; ^~~ drivers/gpu/drm/stm/ltdc.c:600:9: note: initialize the variable 'val' to silence this warning u32 val; ^ = 0 1 warning generated. Use a return instead of break in the default case to fix the warning. Add an error message so that this return is not silent, which could hide issues in the future. Fixes: 484e72d3146b ("drm/stm: ltdc: add support of ycbcr pixel formats") Link: https://github.com/ClangBuiltLinux/linux/issues/1575 Acked-by: Yannick Fertre <yannick.fertre@foss.st.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220222152045.484610-1-nathan@kernel.org
2022-01-27drm/stm: Use drm_module_platform_driver() to register the driverJavier Martinez Canillas1-1/+2
The macro calls to a DRM specific platform driver init handler that checks whether the driver is allowed to be registered or not. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-16-javierm@redhat.com
2022-01-13drm/stm: ltdc: Drop format_mod_supported functionJosé Expósito1-11/+0
The "drm_plane_funcs.format_mod_supported" can be removed in favor of the default implementation. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Yannick Fertre <yannick.fertre@foss.st.com> Tested-by: Yannick Fertre <yannick.fertre@foss.st.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # i.Core STM32MP1 Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211222090552.25972-7-jose.exposito89@gmail.com
2022-01-13drm/stm: ltdc: add support of ycbcr pixel formatsYannick Fertre2-7/+245
This patch adds the following YCbCr input pixel formats on the latest LTDC hardware version: 1 plane (co-planar) : YUYV, YVYU, UYVY, VYUY 2 planes (semi-planar): NV12, NV21 3 planes (full-planar): YU12=I420=DRM YUV420, YV12=DRM YVU420 Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Acked-by: Philippe Cornu <philippe.cornu@foss.st.com> Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211215214843.20703-1-yannick.fertre@foss.st.com
2022-01-13drm/stm: ltdc: add support of flexible pixel formatsYannick Fertre2-56/+145
This feature allows the generation of any RGB pixel format. The list of supported formats is no longer linked to the register LXPFCR_PF, that the reason why a list of drm formats is defined for each display controller version. Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Acked-by: Philippe Cornu <philippe.cornu@foss.st.com> Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com> Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Tested-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211215214835.20593-1-yannick.fertre@foss.st.com
2022-01-13drm/stm: ltdc: add per plane update supportYannick Fertre2-3/+24
Recent ltdc hardware versions offer the ability to update a plane independently of others planes. This is could be useful especially if a plane is assigned to another OS. Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Acked-by: Philippe Cornu <philippe.cornu@foss.st.com> Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com> Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211215214817.20310-1-yannick.fertre@foss.st.com
2022-01-13drm/stm: ltdc: add YCbCr 422 output supportYannick Fertre2-1/+44
LTDC 40100 hw version supports the YCbCr 422 output, reducing the output pins from 24 to 16. This feature is useful for some external devices like HDMI bridges. Both ITU-R BT.601 & ITU-R BT.709 are supported. It is also possible to choose the chrominance order between * Cb is output first (Y0Cb, then Y1Cr, Y2Cb and so on). * Cr is output first (Y0Cr, then Y1Cb, Y2Cr and so on). Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Acked-by: Philippe Cornu <philippe.cornu@foss.st.com> Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com> Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211215214750.20105-1-yannick.fertre@foss.st.com
2022-01-13drm/stm: ltdc: switch to regmapYannick Fertre2-71/+68
Replace the legacy register access by regmap API. Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Acked-by: Philippe Cornu <philippe.cornu@foss.st.com> Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com> Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Tested-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211215214738.19946-1-yannick.fertre@foss.st.com
2022-01-04drm/stm: ltdc: support of new hardware versionYannick Fertre2-30/+145
Add support of new hardware version 0x40100. Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Tested-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Acked-by: Philippe Cornu <philippe.cornu@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211203085618.11314-1-yannick.fertre@foss.st.com
2022-01-04drm/stm: remove conflicting framebuffersYannick Fertre1-0/+5
In case of using simplefb or another conflicting framebuffer, call drm_aperture_remove_framebuffers() to remove memory allocated. Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Philippe Cornu <philippe.cornu@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211206134735.13537-1-yannick.fertre@foss.st.com
2022-01-04drm/stm: dsi: provide the implementation of mode_valid()Antonio Borneo1-0/+98
The dsi has several constraints on the video modes it can support, mainly due to the frequencies that can be generated by the PLL integrated in the DSI device. Verify that the required HS clock can be generated by the PLL. The dsi clock from the dsi PLL and the ltdc pixel clock are asynchronous. The dsi needs to return in LP mode during HFP or HBP to re-synchronize at each video line. Verify that the duration of HFP and HBP allows the dsi to enter in LP mode. Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Acked-by: Philippe Cornu <philippe.cornu@foss.st.com> Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211218215055.212421-3-antonio.borneo@foss.st.com
2022-01-04drm/stm: dsi: move lane capability detection in probe()Antonio Borneo1-8/+8
There is no need to re-compute the dsi lane capability because it only depends on dsi hw version. Since dsi hw version is detected at probe(), move there also the assignment of dsi lane capability. Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Acked-by: Philippe Cornu <philippe.cornu@foss.st.com> Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211218215055.212421-1-antonio.borneo@foss.st.com
2021-11-30drm: Remove CONFIG_DRM_KMS_CMA_HELPER optionThomas Zimmermann1-1/+0
Link drm_fb_cma_helper.o into drm_cma_helper.ko if CONFIG_DRM_KMS_HELPER has been set. Remove CONFIG_DRM_KMS_CMA_HELPER config option. Selecting KMS helpers and CMA will now automatically enable CMA KMS helpers. Some drivers' Kconfig files did not correctly select KMS or CMA helpers. Fix this as part of the change. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211106193509.17472-3-tzimmermann@suse.de
2021-09-09drm/stm: ltdc: add layer alpha supportRaphael Gallais-Pou1-1/+3
Android Hardware Composer supports alpha values applied to layers. Enabling non-opaque layers for the STM CRTC could help offload GPU resources for screen composition. Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Acked-by: Yannick Fertre <yannick.fertre@foss.st.com> Reviewed-by: Yannick Fertre <yannick.fertre@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210907151534.6013-1-raphael.gallais-pou@foss.st.com
2021-09-09drm/stm: ltdc: attach immutable zpos property to planesRaphael Gallais-Pou1-0/+3
Defines plane ordering by hard-coding an immutable Z position from the first plane, used as primary layer, to the next ones as overlay in order of instantiation. This zpos is only an information as it is not possible to modify it, blending operations are still applied from the top to the bottom layer. This patch helps to remove a warning message from the Android Hardware Composer. Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Acked-by: Yannick Fertre <yannick.fertre@foss.st.com> Reviewed-by: Yannick Fertre <yannick.fertre@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210907151323.5850-1-raphael.gallais-pou@foss.st.com
2021-07-19drm/stm: dsi: compute the transition time from LP to HS and backAntonio Borneo1-4/+13
The driver uses a conservative set of hardcoded values for the maximum time delay of the transitions between LP and HS, either for data and clock lanes. By using the info in STM32MP157 datasheet, valid also for other ST devices, compute the actual delay from the lane's bps. Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com> Acked-by: Philippe Cornu <philippe.cornu@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210713144941.3599-1-antonio.borneo@foss.st.com
2021-07-19drm/stm: ltdc: Silence -EPROBE_DEFER till bridge attachedJagan Teki1-3/+5
As dw-mipi-dsi supported all possible ways to find the DSI devices. It can take multiple iterations for ltdc to find all components attached to the DSI bridge. The current ltdc driver failed to find the endpoint as it returned -EINVAL for the first iteration itself. This leads to following error: [    3.099289] [drm:ltdc_load] *ERROR* init encoder endpoint 0 So, check the return value and cleanup the encoder only if it's not -EPROBE_DEFER. This make all components in the attached DSI bridge found properly. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Yannick Fertre <yannick.fertre@foss.st.com> Acked-by: Philippe Cornu <philippe.cornu@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210704135914.268308-1-jagan@amarulasolutions.com
2021-06-29drm/stm: Don't set struct drm_device.irq_enabledThomas Zimmermann1-3/+0
The field drm_device.irq_enabled is only used by legacy drivers with userspace modesetting. Don't set it in stm. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Yannick Fertre <yannick.fertre@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-20-tzimmermann@suse.de
2021-06-24drm/<driver>: drm_gem_plane_helper_prepare_fb is now the defaultDaniel Vetter1-1/+0
No need to set it explicitly. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Philippe Cornu <philippe.cornu@foss.st.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefan Agner <stefan@agner.ch> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Yannick Fertre <yannick.fertre@foss.st.com> Cc: Philippe Cornu <philippe.cornu@foss.st.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Jyri Sarha <jyri.sarha@iki.fi> Cc: Tomi Valkeinen <tomba@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-sunxi@lists.linux.dev Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-9-daniel.vetter@ffwll.ch
2021-06-08drm/stm: Remove usage of drm_display_mode_to_videomode()Marek Vasut1-16/+17
There is not much value in the extra conversion step, the calculations required for the LTDC IP are different than what is used in the drm_display_mode_to_videomode(), so just do the right ones in the LTDC driver right away. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Antonio Borneo <antonio.borneo@foss.st.com> Cc: Benjamin Gaignard <benjamin.gaignard@foss.st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Philippe Cornu <philippe.cornu@foss.st.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Vincent Abriou <vincent.abriou@foss.st.com> Cc: Yannick Fertre <yannick.fertre@foss.st.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com To: dri-devel@lists.freedesktop.org Tested-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210607172457.14471-1-marex@denx.de
2021-05-06drm/stm: Don't set allow_fb_modifiers explicitlyDaniel Vetter1-2/+0
Since commit 890880ddfdbe256083170866e49c87618b706ac7 Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Date: Fri Jan 4 09:56:10 2019 +0100 drm: Auto-set allow_fb_modifiers when given modifiers at plane init this is done automatically as part of plane init, if drivers set the modifier list correctly. Which is the case here. Acked-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Yannick Fertre <yannick.fertre@foss.st.com> Cc: Philippe Cornu <philippe.cornu@foss.st.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20210427092018.832258-7-daniel.vetter@ffwll.ch
2021-03-08drm/stm: dsi: Avoid printing errors for -EPROBE_DEFERYannick Fertre1-6/+3
Don't print error when probe deferred error is returned. Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Tested-by: Yannick Fertre <yannick.fertre@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210222092205.32086-2-raphael.gallais-pou@foss.st.com
2021-03-08drm/stm: ltdc: Use simple encoderJagan Teki1-10/+2
STM ltdc driver uses an empty implementation for its encoder. Replace the code with the generic simple encoder. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Yannick Fertre <yannick.fertre@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210302175700.28640-1-jagan@amarulasolutions.com
2021-02-25drm: Use state helper instead of the plane state pointerMaxime Ripard1-1/+2
Many drivers reference the plane->state pointer in order to get the current plane state in their atomic_update or atomic_disable hooks, which would be the new plane state in the global atomic state since _swap_state happened when those hooks are run. Use the drm_atomic_get_new_plane_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ adds_new_state @ identifier plane_atomic_func.func; identifier plane, state; identifier new_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *new_state = plane->state; + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane); ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
2021-02-25drm/atomic: Pass the full state to planes atomic disable and updateMaxime Ripard1-2/+4
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert the remaining helpers to provide a consistent interface, this time with the planes atomic_update and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_disable)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier crtc_state; identifier plane, plane_state, state; expression e; @@ f(struct drm_crtc_state *crtc_state) { ... struct drm_atomic_state *state = e; <+... ( - FUNCS->atomic_disable(plane, plane_state) + FUNCS->atomic_disable(plane, state) | - FUNCS->atomic_update(plane, plane_state) + FUNCS->atomic_update(plane, state) ) ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *old_plane_state) { <... - state + old_plane_state ...> } @ ignores_old_state @ identifier plane_atomic_func.func; identifier plane, old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... when != old_state } @ adds_old_state depends on plane_atomic_func && !ignores_old_state @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *plane_state) { + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <+... - plane_state->state + state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech
2021-02-24drm: Rename plane->state variables in atomic update and disableMaxime Ripard1-14/+14
Some drivers are storing the plane->state pointer in atomic_update and atomic_disable in a variable simply called state, while the state passed as an argument is called old_state. In order to ease subsequent reworks and to avoid confusing or inconsistent names, let's rename those variables to new_state. This was done using the following coccinelle script, plus some manual changes for mtk and tegra. @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ moves_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *new_state = plane->state; ... } @ depends on moves_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; identifier old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { <... - state + new_state ...> } @ moves_new_state_oldstate @ identifier plane_atomic_func.func; identifier plane; symbol oldstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *oldstate) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *newstate = plane->state; ... } @ depends on moves_new_state_oldstate @ identifier plane_atomic_func.func; identifier plane; identifier old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { <... - state + newstate ...> } @ moves_new_state_old_pstate @ identifier plane_atomic_func.func; identifier plane; symbol old_pstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_pstate) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *new_pstate = plane->state; ... } @ depends on moves_new_state_old_pstate @ identifier plane_atomic_func.func; identifier plane; identifier old_pstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_pstate) { <... - state + new_pstate ...> } Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-8-maxime@cerno.tech
2021-02-24drm/atomic: Pass the full state to planes atomic_checkMaxime Ripard1-1/+3
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert all the remaining helpers to provide a consistent interface, starting with the planes atomic_check. The conversion was done using the coccinelle script below plus some manual changes for vmwgfx, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... int (*atomic_check)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_check(plane, plane_state) + FUNCS->atomic_check(plane, state) ...+> } @ ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { ... when != new_plane_state } @ adds_new_state depends on plane_atomic_func && !ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *new_plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
2021-02-24drm: Rename plane atomic_check state namesMaxime Ripard1-5/+5
Most drivers call the argument to the plane atomic_check hook simply state, which is going to conflict with the global atomic state in a later rework. Let's rename it to new_plane_state (or new_state depending on the convention used in the driver). This was done using the coccinelle script below, and built tested: @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { .atomic_check = func, }; @ has_old_state @ identifier plane_atomic_func.func; identifier plane; expression e; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *old_state = e; ... } @ depends on has_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_state ) { <+... - state + new_state ...+> } @ has_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... } @ depends on has_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_plane_state ) { <+... - state + new_plane_state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-2-maxime@cerno.tech
2021-02-23drm/gem: Move drm_gem_fb_prepare_fb() to GEM atomic helpersThomas Zimmermann1-2/+2
The function drm_gem_fb_prepare_fb() is a helper for atomic modesetting, but currently located next to framebuffer helpers. Move it to GEM atomic helpers, rename it slightly and adopt the drivers. Same for the rsp simple-pipe helper. Compile-tested with x86-64, aarch64 and arm. The patch is fairly large, but there are no functional changes. v3: * remove out-comented line in drm_gem_framebuffer_helper.h (Maxime) v2: * rename to drm_gem_plane_helper_prepare_fb() (Daniel) * add tutorial-style documentation Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210222141756.7864-1-tzimmermann@suse.de
2021-02-15drm/stm: Fix bus_flags handlingMarek Vasut1-2/+31
The drm_display_mode_to_videomode() does not populate DISPLAY_FLAGS_DE_LOW or DISPLAY_FLAGS_PIXDATA_NEGEDGE flags in struct videomode. Therefore, no matter what polarity the next bridge or display might require, these flags are never set, and thus the LTDC GCR_DEPOL and GCR_PCPOL bits are never set and the LTDC behaves as if both DISPLAY_FLAGS_PIXDATA_POSEDGE and DISPLAY_FLAGS_DE_HIGH were always set. The fix for this problem is taken almost verbatim from MXSFB driver. In case there is a bridge attached to the LTDC, the bridge might have extra polarity requirements, so extract bus_flags from the bridge and use them for LTDC configuration. Otherwise, extract bus_flags from the connector, which is the display. Fixes: b759012c5fa7 ("drm/stm: Add STM32 LTDC driver") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Antonio Borneo <antonio.borneo@st.com> Cc: Benjamin Gaignard <benjamin.gaignard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com To: dri-devel@lists.freedesktop.org Tested-by: Yannick Fertre <yannick.fertre@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210127110756.125570-1-marex@denx.de
2020-12-15drm: automatic legacy gamma supportTomi Valkeinen1-1/+0
To support legacy gamma ioctls the drivers need to set drm_crtc_funcs.gamma_set either to a custom implementation or to drm_atomic_helper_legacy_gamma_set. Most of the atomic drivers do the latter. We can simplify this by making the core handle it automatically. Move the drm_atomic_helper_legacy_gamma_set() functionality into drm_color_mgmt.c to make drm_mode_gamma_set_ioctl() use drm_crtc_funcs.gamma_set if set or GAMMA_LUT property if not. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-2-tomi.valkeinen@ti.com
2020-11-06drm/<drivers>: Constify struct drm_driverDaniel Vetter1-1/+1
Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: kernel test robot <lkp@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
2020-11-02drm/atomic: Pass the full state to CRTC atomic begin and flushMaxime Ripard1-1/+1
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_begin and atomic_flush. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_begin(crtc, old_crtc_state); + FUNCS->atomic_begin(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_flush(crtc, old_crtc_state); + FUNCS->atomic_flush(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_begin(crtc, crtc_state); + FUNCS->atomic_begin(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_flush(crtc, crtc_state); + FUNCS->atomic_flush(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_begin)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_begin)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_flush)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_begin = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_flush = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-2-maxime@cerno.tech
2020-10-09drm/atomic: Pass the full state to CRTC atomic enable/disableMaxime Ripard1-2/+2
If the CRTC driver ever needs to access the full DRM state, it can't do so at atomic_enable / atomic_disable time since drm_atomic_helper_swap_state will have cleared the pointer from the struct drm_crtc_state to the struct drm_atomic_state before calling those hooks. In order to allow that, let's pass the full DRM state to atomic_enable and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_disable(crtc, crtc_state); + FUNCS->atomic_disable(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_enable(crtc, crtc_state); + FUNCS->atomic_enable(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_enable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_enable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_disable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_disable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_enable = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/845aa10ef171fc0ea060495efef142a0c13f7870.1602161031.git-series.maxime@cerno.tech
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 11:38:13 +0000