summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/rcar-du
AgeCommit message (Collapse)AuthorFilesLines
2020-06-21drm: rcar-du: Fix build errorDaniel Gomez1-0/+1
Select DRM_KMS_HELPER dependency. Build error when DRM_KMS_HELPER is not selected: drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xd48): undefined reference to `drm_atomic_helper_bridge_duplicate_state' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xd50): undefined reference to `drm_atomic_helper_bridge_destroy_state' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xd70): undefined reference to `drm_atomic_helper_bridge_reset' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xdc8): undefined reference to `drm_atomic_helper_connector_reset' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xde0): undefined reference to `drm_helper_probe_single_connector_modes' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xe08): undefined reference to `drm_atomic_helper_connector_duplicate_state' drivers/gpu/drm/rcar-du/rcar_lvds.o:(.rodata+0xe10): undefined reference to `drm_atomic_helper_connector_destroy_state' Fixes: c6a27fa41fab ("drm: rcar-du: Convert LVDS encoder code to bridge driver") Cc: <stable@vger.kernel.org> Signed-off-by: Daniel Gomez <dagmcr@gmail.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2020-05-14drm: rcar-du: Set primary plane zpos immutably at initializingTomohito Esaki2-13/+17
According to drm_plane_create_zpos_property() function documentation, all planes zpos range should be set if zpos property is supported. However, the rcar-du driver didn't set primary plane zpos range. Since the primary plane's zpos is fixed, set it immutably. Reported-by: Yoshihito Ogawa <yoshihito.ogawa.kc@renesas.com> Reported-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Tomohito Esaki <etom@igel.co.jp> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Stone <daniels@collabora.com> [Turn continue into if ... else ...] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2020-04-02drm/rcar-du: Use simple encoderThomas Zimmermann1-11/+3
The rcar-du driver uses an empty implementation for its encoder. Replace the code with the generic simple encoder. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-12-tzimmermann@suse.de
2020-03-26drm/rcar-du: Drop explicit drm_mode_config_cleanup callDaniel Vetter2-2/+3
It's right above the drm_dev_put(). This is made possible by a preceeding patch which added a drmm_ cleanup action to drm_mode_config_init(), hence all we need to do to ensure that drm_mode_config_cleanup() is run on final drm_device cleanup is check the new error code for _init(). Aside: Another driver with a bit much devm_kzalloc, which should probably use drmm_kzalloc instead ... v2: Explain why this cleanup is possible (Laurent). v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas) Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> (v2) Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: linux-renesas-soc@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-37-daniel.vetter@ffwll.ch
2020-02-26drm/bridge: Extend bridge API to disable connector creationLaurent Pinchart2-3/+10
Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and has worked pretty well so far, but causes several issues: - It prevents supporting more complex display pipelines where DRM connector operations are split over multiple components. For instance a pipeline with a bridge connected to the DDC signals to read EDID data, and another one connected to the HPD signal to detect connection and disconnection, will not be possible to support through this model. - It requires every bridge driver to implement similar connector handling code, resulting in code duplication. - It assumes that a bridge will either be wired to a connector or to another bridge, but doesn't support bridges that can be used in both positions very well (although there is some ad-hoc support for this in the analogix_dp bridge driver). In order to solve these issues, ownership of the connector should be moved to the display controller driver (where it can be implemented using helpers provided by the core). Extend the bridge API to allow disabling connector creation in bridge drivers as a first step towards the new model. The new flags argument to the bridge .attach() operation allows instructing the bridge driver to skip creating a connector. Unconditionally set the new flags argument to 0 for now to keep the existing behaviour, and modify all existing bridge drivers to return an error when connector creation is not requested as they don't support this feature yet. The change is based on the following semantic patch, with manual review and edits. @ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .attach = fn }; @ depends on rule1 @ identifier rule1.fn; identifier bridge; statement S, S1; @@ int fn( struct drm_bridge *bridge + , enum drm_bridge_attach_flags flags ) { ... when != S + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { + DRM_ERROR("Fix bridge driver to make connector optional!"); + return -EINVAL; + } + S1 ... } @ depends on rule1 @ identifier rule1.fn; identifier bridge, flags; expression E1, E2, E3; @@ int fn( struct drm_bridge *bridge, enum drm_bridge_attach_flags flags ) { <... drm_bridge_attach(E1, E2, E3 + , flags ) ...> } @@ expression E1, E2, E3; @@ drm_bridge_attach(E1, E2, E3 + , 0 ) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
2020-01-31drm/bridge: Patch atomic hooks to take a drm_bridge_stateBoris Brezillon1-3/+5
This way the drm_bridge_funcs interface is consistent with the rest of the subsystem. The drivers implementing those hooks are patched too. v10: * Add changelog to the commit message v8 -> v9: * No changes v7: * Adjust things to the bridge_state changes v6: * Also fixed rcar-du/rcar_lvds.c same as analogix/analogix_dp_core.c v5: * No changes v4: * Rename func params into old_bridge_state * Add Laurent's Rb v3: * Old state clarification moved to a separate patch v2: * Pass the old bridge state Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: renamed state as old_bridge_state in rcar_lvds_atomic_disable] Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-5-boris.brezillon@collabora.com
2020-01-31drm/rcar-du: Plug atomic state hooks to the default implementationBoris Brezillon1-0/+3
This is needed to pass a bridge state to all atomic hooks, if we don't do that, the core can't duplicate/create bridge states. v10: * Add changelog to the commit message v9: * Add Neil's R-b * Move earlier in the series v8: * No changes v7: * New patch Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-3-boris.brezillon@collabora.com
2020-01-08Revert "drm/bridge: Patch atomic hooks to take a drm_bridge_state"Boris Brezillon1-5/+3
This reverts commit f7619a58ef92 ("drm/bridge: Patch atomic hooks to take a drm_bridge_state"). Commit 6ed7e9625fa6 ("drm/bridge: Add a drm_bridge_state object") introduced a circular dependency between drm.ko and drm_kms_helper.ko which uncovered a misdesign in how the whole thing was implemented. Let's revert all patches depending on the bridge_state infrastructure for now. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-5-boris.brezillon@collabora.com
2020-01-07drm/bridge: Patch atomic hooks to take a drm_bridge_stateBoris Brezillon1-3/+5
This way the drm_bridge_funcs interface is consistent with the rest of the subsystem. The only driver implementing those hooks (analogix DP) is patched too. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> [narmstrong: renamed state as old_bridge_state in rcar_lvds_atomic_disable] Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-3-narmstrong@baylibre.com
2019-12-18Merge tag 'du-next-20191218' of git://linuxtv.org/pinchartl/media into drm-nextDaniel Vetter13-150/+643
R-Car Display Unit changes: - Color Management Module support - LVDS encoder dual-link support enhancements - R8A77980 support Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191218151710.GA13830@pendragon.ideasonboard.com
2019-12-18drm: rcar-du: Add r8a77980 supportKieran Bingham1-1/+5
Add direct support for the r8a77980 (V3H). The V3H shares a common, compatible configuration with the r8a77970 (V3M) so that device info structure is reused. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-12-18drm: rcar-du: lvds: Allow for even and odd pixels swapFabrizio Castro1-19/+58
DT properties dual-lvds-even-pixels and dual-lvds-odd-pixels can be used to work out if the driver needs to swap even and odd pixels around. This patch makes use of the return value from function drm_of_lvds_get_dual_link_pixel_order to determine if we need to swap odd and even pixels around for things to work properly. The dual_link boolean field from struct rcar_lvds is not sufficient to describe the type of LVDS link anymore, since we now have information related to pixel order, therefore rename it to link_type and repurpose its usage to fit the new requirements. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-12-18drm: rcar-du: lvds: Get dual link configuration from DTFabrizio Castro1-8/+46
For dual-LVDS configurations, it is now possible to mark the DT port nodes for the sink with boolean properties (like dual-lvds-even-pixels and dual-lvds-odd-pixels) to let drivers know the encoders need to be configured in dual-LVDS mode. Rework the implementation of rcar_lvds_parse_dt_companion to make use of the DT markers while keeping backward compatibility. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-12-18drm: rcar-du: lvds: Improve identification of panelsFabrizio Castro1-65/+10
Dual-LVDS panels are mistakenly identified as bridges, this commit replaces the current logic with a call to drm_of_find_panel_or_bridge to sort that out. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-12-18drm: rcar-du: lvds: Get mode from stateLaurent Pinchart1-66/+74
The R-Car LVDS encoder driver implements the bridge .mode_set() operation for the sole purpose of storing the mode in the LVDS private data, to be used later when enabling the encoder. Switch to the bridge .atomic_enable() and .atomic_disable() operations in order to access the global atomic state, and get the mode from the state instead. Remove both the unneeded .mode_set() operation and the display_mode and mode fields storing state data from the rcar_lvds private structure. As a side effect we get the CRTC from the state, replace the CRTC pointer retrieved through the bridge's encoder that shouldn't be used by atomic drivers. While at it, clarify a few error messages in rcar_lvds_get_lvds_mode() and turn them into warnings as they are not fatal. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Tested-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
2019-12-18drm: rcar-du: Recognize "renesas,vsps" in addition to "vsps"Geert Uytterhoeven1-5/+12
The Renesas-specific "vsps" property lacks a vendor prefix. Add a "renesas," prefix to comply with DT best practises. Retain backward compatibility with old DTBs by falling back to "vsps" when needed. Fixes: 6d62ef3ac30be756 ("drm: rcar-du: Expose the VSP1 compositor through KMS planes") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-12-18drm: rcar-du: crtc: Register GAMMA_LUT propertiesJacopo Mondi1-0/+4
Enable the GAMMA_LUT KMS property using the framework helpers to register the property and set the associated gamma table maximum size. Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-12-18drm: rcar-du: crtc: Control CMM operationsJacopo Mondi3-0/+76
Implement CMM handling in the crtc begin and enable atomic callbacks, and enable CMM unit through the Display Extensional Functions register at group setup time. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> [Fix printk format modifier for size_t variable] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-12-18drm: rcar-du: kms: Initialize CMM instancesJacopo Mondi5-0/+88
Implement device tree parsing to collect the available CMM instances described by the 'renesas,cmms' property. Associate CMMs with CRTCs and store a mask of active CMMs in the DU group for later enablement. Enforce the probe and suspend/resume ordering of DU and CMM by creating a stateless device link between the two. Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-12-18drm: rcar-du: Add support for CMMJacopo Mondi4-0/+284
Add a driver for the R-Car Display Unit Color Correction Module. In most of Gen3 SoCs, each DU output channel is provided with a CMM unit to perform image enhancement and color correction. Add support for CMM through a driver that supports configuration of the 1-dimensional LUT table. More advanced CMM features will be implemented on top of this initial one. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-12-09drm/panel: decouple connector from drm_panelSam Ravnborg1-1/+1
To facilitate moving connector creation to display drivers, decouple the drm_connector from drm_panel. This patch adds a connector argument to drm_panel_get_modes(). All users of drm_panel_get_modes() already had the connector available, so updating users was trivial. With this patch drm_panel no longer keeps a reference to the drm_connector. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@nxp.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: CK Hu <ck.hu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Torsten Duwe <duwe@lst.de> Cc: Vasily Khoruzhick <anarsoul@gmail.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Sean Paul <seanpaul@chromium.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Hariprasad Kelam <hariprasad.kelam@gmail.com> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Brian Masney <masneyb@onstation.org> Cc: Rob Clark <robdclark@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Allison Randal <allison@lohutok.net> Cc: Shayenne Moura <shayenneluzmoura@gmail.com> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-7-sam@ravnborg.org
2019-12-09drm: Stop accessing encoder->bridge directlyBoris Brezillon1-3/+7
We are about to replace the single-linked bridge list by a double-linked one based on list.h, leading to the suppression of the encoder->bridge field. But before we can do that we must provide a drm_bridge_chain_get_first_bridge() bridge helper and patch all drivers and core helpers to use it instead of directly accessing encoder->bridge. Note that we still have 2 drivers (VC4 and Exynos) manipulating the encoder->bridge field directly because they need to cut the bridge chain in order to control the enable/disable sequence. This is definitely not something we want to encourage, so let's keep those 2 oddities around until we find a better solution. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-4-boris.brezillon@collabora.com
2019-10-16drm: rcar-du: lvds: Add r8a774b1 supportBiju Das1-0/+1
The LVDS encoders on RZ/G2N SoC is similar to R-Car M3-N. Add support for RZ/G2N (R8A774B1) SoC to the LVDS encoder driver. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-10-16drm: rcar-du: Add R8A774B1 supportBiju Das1-0/+30
Add support for the R8A774B1 DU (which is very similar to the R8A77965 DU except that it lacks TCON and CMM); it has one RGB output, one LVDS output and one HDMI output. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-10-16drm: rcar_lvds: Fix color mismatches on R-Car H2 ES2.0 and laterGeert Uytterhoeven1-7/+21
Commit 5cca30ebe089be23 ("drm/rcar-du: Add LVDS_LANES quirk") states that LVDS lanes 1 and 3 are inverted on R-Car H2 ES1 only, and that the problem has been fixed in newer revisions. However, the code didn't take into account the actual hardware revision, thus applying the quirk also on newer hardware revisions, causing green color reversals. Fix this by applying the quirk when running on R-Car H2 ES1.x only. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: 5cca30ebe089be23 ("drm/rcar-du: Add LVDS_LANES quirk") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-10-16drm: rcar-du: kms: Expand comment in vsps parsing routineJacopo Mondi1-1/+5
Expand comment in the 'vsps' parsing routine to specify the LIF channel index defaults to 0 in case the second cell of the property is not specified to remain compatible with older DT bindings. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-10-11Merge tag 'drm-misc-next-2019-10-09-2' of ↵Dave Airlie1-2/+3
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.5: UAPI Changes: -Colorspace: Expose different prop values for DP vs. HDMI (Gwan-gyeong Mun) -fourcc: Add DRM_FORMAT_MOD_ARM_16X16_BLOCK_U_INTERLEAVED (Raymond) -not_actually: s/ENOTSUPP/EOPNOTSUPP/ in drm_edid and drm_mipi_dbi. This should not reach userspace, but adding here to specifically call that out (Daniel) -i810: Prevent underflow in dispatch ioctls (Dan) -komeda: Add ACLK sysfs attribute (Mihail) -v3d: Allow userspace to clean up after render jobs (Iago) Cross-subsystem Changes: -MAINTAINERS: -Add Alyssa & Steven as panfrost reviewers (Rob) -Add Jernej as DE2 reviewer (Maxime) -Add Chen-Yu as Allwinner maintainer (Maxime) -staging: Make some stack arrays static const (Colin) Core Changes: -ttm: Allow drivers to specify their vma manager (to use gem mgr) (Gerd) -docs: Various fixes in connector/encoder/bridge docs (Daniel, Lyude, Laurent) -connector: Allow more than 3 possible encoders for a connector (José) -dp_cec: Allow a connector to be associated with a cec device (Dariusz) -various: Fix some compile/sparse warnings (Ville) -mm: Ensure mm node removals are properly serialised (Chris) -panel: Specify the type of panel for drm_panels for later use (Laurent) -panel: Use drm_panel_init to init device and funcs (Laurent) -mst: Refactors and cleanups in anticipation of suspend/resume support (Lyude) -vram: -Add lazy unmapping for gem bo's (Thomas) -Unify and rationalize vram mm and gem vram (Thomas) -Expose vmap and vunmap for gem vram objects (Thomas) -Allow objects to be pinned at the top of vram to avoid fragmentation (Thomas) Driver Changes: -various: Include drm_bridge.h instead of relying on drm_crtc.h (Boris) -ast/mgag200: Refactor show_cursor(), move cursor to top of video mem (Thomas) -komeda: -Add error event printing (behind CONFIG) and reg dump support (Lowry) -Add suspend/resume support (Lowry) -Workaround D71 shadow registers not flushing on disable (Lowry) -meson: Add suspend/resume support (Neil) -omap: Miscellaneous refactors and improvements (Tomi/Jyri) -panfrost/shmem: Silence lockdep by using mutex_trylock (Rob) -panfrost: Miscellaneous small fixes (Rob/Steven) -sti: Fix warnings (Benjamin/Linus) -sun4i: -Add vcc-dsi regulator to sun6i_mipi_dsi (Jagan) -A few patches to figure out the DRQ/start delay calc on dsi (Jagan/Icenowy) -virtio: -Add module param to switch resource reuse workaround on/off (Gerd) -Avoid calling vmexit while holding spinlock (Gerd) -Use gem shmem helpers instead of ttm (Gerd) -Accommodate command buffer allocations too big for cma (David) Cc: Rob Herring <robh@kernel.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lyude Paul <lyude@redhat.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Dariusz Marcinkiewicz <darekm@google.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Raymond Smith <raymond.smith@arm.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Colin Ian King <colin.king@canonical.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mihail Atanassov <Mihail.Atanassov@arm.com> Cc: Lowry Li <Lowry.Li@arm.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Steven Price <steven.price@arm.com> Cc: Benjamin Gaignard <benjamin.gaignard@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Iago Toral Quiroga <itoral@igalia.com> Cc: David Riley <davidriley@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Thu 10 Oct 2019 01:00:47 AM AEST # gpg: using RSA key 732C002572DCAF79 # gpg: Can't check signature: public key not found # Conflicts: # drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c # drivers/gpu/drm/i915/i915_drv.c # drivers/gpu/drm/i915/i915_gem.c # drivers/gpu/drm/i915/i915_gem_gtt.c # drivers/gpu/drm/i915/i915_vma.c From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20191009150825.GA227673@art_vandelay
2019-10-03Merge drm/drm-next into drm-misc-nextMaxime Ripard1-8/+6
We haven't done any backmerge for a while due to the merge window, and it starts to become an issue for komeda. Let's bring 5.4-rc1 in. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-03Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard2-12/+7
We haven't backmerged for a while, let's start the -rc period by pulling rc1. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-09-23drm: Free the writeback_job when it with an empty fbLowry Li (Arm Technology China)1-2/+2
Adds the check if the writeback_job with an empty fb, then it should be freed in atomic_check phase. With this change, the driver users will not check empty fb case any more. So refined accordingly. Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/1564571048-15029-2-git-send-email-lowry.li@arm.com
2019-09-19Merge tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2-8/+5
Pull drm updates from Dave Airlie: "This is the main pull request for 5.4-rc1 merge window. I don't think there is anything outstanding so next week should just be fixes, but we'll see if I missed anything. I landed some fixes earlier in the week but got delayed writing summary and sending it out, due to a mix of sick kid and jetlag! There are some fixes pending, but I'd rather get the main merge out of the way instead of delaying it longer. It's also pretty large in commit count and new amd header file size. The largest thing is four new amdgpu products (navi12/14, arcturus and renoir APU support). Otherwise it's pretty much lots of work across the board, i915 has started landing tigerlake support, lots of icelake fixes and lots of locking reworking for future gpu support, lots of header file rework (drmP.h is nearly gone), some old legacy hacks (DRM_WAIT_ON) have been put into the places they are needed. uapi: - content protection type property for HDCP core: - rework include dependencies - lots of drmP.h removals - link rate calculation robustness fix - make fb helper map only when required - add connector->DDC adapter link - DRM_WAIT_ON removed - drop DRM_AUTH usage from drivers dma-buf: - reservation object fence helper dma-fence: - shrink dma_fence struct - merge signal functions - store timestamps in dma_fence - selftests ttm: - embed drm_get_object struct into ttm_buffer_object - release_notify callback bridges: - sii902x - audio graph card support - tc358767 - aux data handling rework - ti-snd64dsi86 - debugfs support, DSI mode flags support panels: - Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe Himax8279d, Sharp LD-D5116Z01B - TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1 i915: - Initial tigerlake platform support - Locking simplification work, general all over refactoring. - Selftests - HDCP debug info improvements - DSI properties - Icelake display PLL fixes, colorspace fixes, bandwidth fixes, DSI suspend/resume - GuC fixes - Perf fixes - ElkhartLake enablement - DP MST fixes - GVT - command parser enhancements amdgpu: - add wipe memory on release flag for buffer creation - Navi12/14 support (may be marked experimental) - Arcturus support - Renoir APU support - mclk DPM for Navi - DC display fixes - Raven scatter/gather support - RAS support for GFX - Navi12 + Arcturus power features - GPU reset for Picasso - smu11 i2c controller support amdkfd: - navi12/14 support - Arcturus support radeon: - kexec fix nouveau: - improved display color management - detect lack of GPU power cables vmwgfx: - evicition priority support - remove unused security feature msm: - msm8998 display support - better async commit support for cursor updates etnaviv: - per-process address space support - performance counter fixes - softpin support mcde: - DCS transfers fix exynos: - drmP.h cleanup lima: - reduce logging kirin: - misc clenaups komeda: - dual-link support - DT memory regions hisilicon: - misc fixes imx: - IPUv3 image converter fixes - 32-bit RGB V4L2 pixel format support ingenic: - more support for panel related cases mgag200: - cursor support fix panfrost: - export GPU features register to userspace - gpu heap allocations - per-fd address space support pl111: - CLD pads wiring support removed from DT rockchip: - rework to use DRM PSR helpers - fix bug in VOP_WIN_GET macro - DSI DT binding rework sun4i: - improve support for color encoding and range - DDC enabled GPIO tinydrm: - rework SPI support - improve MIPI-DBI support - moved to drm/tiny vkms: - rework CRC tracking dw-hdmi: - get_eld and i2s improvements gm12u320: - misc fixes meson: - global code cleanup - vpu feature detect omap: - alpha/pixel blend mode properties rcar-du: - misc fixes" * tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm: (2112 commits) drm/nouveau/bar/gm20b: Avoid BAR1 teardown during init drm/nouveau: Fix ordering between TTM and GEM release drm/nouveau/prime: Extend DMA reservation object lock drm/nouveau: Fix fallout from reservation object rework drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors drm/i915: Use NOEVICT for first pass on attemping to pin a GGTT mmap drm/i915: to make vgpu ppgtt notificaiton as atomic operation drm/i915: Flush the existing fence before GGTT read/write drm/i915: Hold irq-off for the entire fake lock period drm/i915/gvt: update RING_START reg of vGPU when the context is submitted to i915 drm/i915/gvt: update vgpu workload head pointer correctly drm/mcde: Fix DSI transfers drm/msm: Use the correct dma_sync calls harder drm/msm: remove unlikely() from WARN_ON() conditions drm/msm/dsi: Fix return value check for clk_get_parent drm/msm: add atomic traces drm/msm/dpu: async commit support drm/msm: async commit support drm/msm: split power control from prepare/complete_commit drm/msm: add kms->flush_commit() ...
2019-09-08drm/bridge: panel: Infer connector type from panel by defaultLaurent Pinchart1-2/+2
The drm panel bridge creates a connector using a connector type explicitly passed by the display controller or bridge driver that instantiates the panel bridge. Now that drm_panel reports its connector type, we can use it to avoid passing an explicit (and often incorrect) connector type to drm_panel_bridge_add() and devm_drm_panel_bridge_add(). Several drivers report incorrect or unknown connector types to userspace. Reporting a different type may result in a breakage. For that reason, rename (devm_)drm_panel_bridge_add() to (devm_)drm_panel_bridge_add_typed(), and add new (devm_)drm_panel_bridge_add() functions that use the panel connector type. Update all callers of (devm_)drm_panel_bridge_add() to the _typed function, they will be converted one by one after testing. The panel drivers have been updated with the following Coccinelle semantic patch, with manual inspection and fixes to indentation. @@ expression bridge; expression dev; expression panel; identifier type; @@ ( -bridge = drm_panel_bridge_add(panel, type); +bridge = drm_panel_bridge_add_typed(panel, type); | -bridge = devm_drm_panel_bridge_add(dev, panel, type); +bridge = devm_drm_panel_bridge_add_typed(dev, panel, type); ) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190904132804.29680-3-laurent.pinchart@ideasonboard.com
2019-08-28drm: Stop including drm_bridge.h from drm_crtc.hBoris Brezillon1-0/+1
We are about to add a drm_bridge_state that inherits from drm_private_state which is defined in drm_atomic.h. Problem is, drm_atomic.h includes drm_crtc.h which in turn includes drm_bridge.h, leading to "drm_private_state has incomplete type" error. Let's force all users of the drm_bridge API to explicitly include drm_bridge.h. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190826152649.13820-2-boris.brezillon@collabora.com
2019-08-16drm: rcar_lvds: Fix dual link mode operationsJacopo Mondi1-4/+2
The R-Car LVDS encoder units support dual-link operations by splitting the pixel output between the primary encoder and the companion encoder. Currently the companion encoder fails at probe time, causing the registration of the primary to fail as well, preventing the whole DU unit from being registered at all. Fix this by not bailing out from probe with error if the "renesas,companion" property is not specified. Fixes: fa440d870358 ("drm: rcar-du: lvds: Add support for dual-link mode") Reported-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-08-16drm: rcar-du: lvds: Fix bridge_to_rcar_lvdsFabrizio Castro1-4/+4
Using name "bridge" for macro bridge_to_rcar_lvds argument doesn't work when the pointer name used by the caller is not "bridge". Rename the argument to "b" to allow for any pointer name. While at it, fix the connector_to_rcar_lvds macro similarly. Fixes: c6a27fa41fab ("drm: rcar-du: Convert LVDS encoder code to bridge driver") Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [Fix connector_to_rcar_lvds] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-06-21drm/rcar-du: Drop drm_gem_prime_export/importDaniel Vetter1-2/+0
They're the default. Aside: Would be really nice to switch the others over to drm_gem_object_funcs. Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: linux-renesas-soc@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-27-daniel.vetter@ffwll.ch
2019-06-21drm/prime: Actually remove DRIVER_PRIME everywhereDaniel Vetter1-2/+1
Split out to make the functional changes stick out more. All places where DRIVER_PRIME was used have been removed in previous patches already. v2: amdgpu gained DRIVER_SYNCOBJ_TIMELINE. v3: amdgpu lost DRIVER_SYNCOBJ_TIMELINE. v4: Don't add a space in i915_drv.c (Sam) v5: Add note that previous patches removed all the DRIVER_PRIME users already (Emil). v6: Fixupe ingenic (new driver) while applying. Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: amd-gfx@lists.freedesktop.org Cc: etnaviv@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: lima@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-aspeed@lists.ozlabs.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: nouveau@lists.freedesktop.org Cc: NXP Linux Team <linux-imx@nxp.com> Cc: spice-devel@lists.freedesktop.org Cc: virtualization@lists.linux-foundation.org Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: xen-devel@lists.xenproject.org Link: https://patchwork.freedesktop.org/patch/msgid/20190617153924.414-1-daniel.vetter@ffwll.ch
2019-06-18drm/rcar-du: Fix error check when retrieving crtc stateSean Paul1-2/+2
drm_atomic_get_crtc_state() returns an error pointer when it fails, so the null check is doing nothing here. Credit to 0-day/Dan Carpenter for reporting this. Fixes: 6f3b62781bbd ("drm: Convert connector_helper_funcs->atomic_check to accept drm_atomic_state") Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Eric Anholt <eric@anholt.net> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [for rcar lvds] Cc: Sean Paul <seanpaul@chromium.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Lyude Paul <lyude@redhat.com> Cc: Karol Herbst <karolherbst@gmail.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: dri-devel@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190617181548.124134-1-sean@poorly.run
2019-06-14Merge tag 'drm-misc-next-2019-06-14' of ↵Daniel Vetter1-5/+7
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.3: UAPI Changes: Cross-subsystem Changes: - Add code to signal all dma-fences when freed with pending signals. - Annotate reservation object access in CONFIG_DEBUG_MUTEXES Core Changes: - Assorted documentation fixes. - Use irqsave/restore spinlock to add crc entry. - Move code around to drm_client, for internal modeset clients. - Make drm_crtc.h and drm_debugfs.h self-contained. - Remove drm_fb_helper_connector. - Add bootsplash to todo. - Fix lock ordering in pan_display_legacy. - Support pinning buffers to current location in gem-vram. - Remove the now unused locking functions from gem-vram. - Remove the now unused kmap-object argument from vram helpers. - Stop checking return value of debugfs_create. - Add atomic encoder enable/disable helpers. - pass drm_atomic_state to atomic connector check. - Add atomic support for bridge enable/disable. - Add self refresh helpers to core. Driver Changes: - Add extra delay to make MTP SDM845 work. - Small fixes to virtio, vkms, sii902x, sii9234, ast, mcde, analogix, rockchip. - Add zpos and ?BGR8888 support to meson. - More removals of drm_os_linux and drmP headers for amd, radeon, sti, r128, r128, savage, sis. - Allow synopsis to unwedge the i2c hdmi bus. - Add orientation quirks for GPD panels. - Edid cleanups and fixing handling for edid < 1.2. - Add runtime pm to stm. - Handle s/r in dw-hdmi. - Add hooks for power on/off to dsi for stm. - Remove virtio dirty tracking code, done in drm core. - Rework BO handling in ast and mgag200. Tiny conflict in drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c, needed #include <linux/slab.h> to make it compile. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0e01de30-9797-853c-732f-4a5bd6e61445@linux.intel.com
2019-06-13drm: Convert connector_helper_funcs->atomic_check to accept drm_atomic_stateSean Paul1-5/+7
Everyone who implements connector_helper_funcs->atomic_check reaches into the connector state to get the atomic state. Instead of continuing this pattern, change the callback signature to just give atomic state and let the driver determine what it does and does not need from it. Eventually all atomic functions should do this, but that's just too much busy work for me. Changes in v3: - Added to the set Changes in v4: - None Changes in v5: - intel_digital_connector_atomic_check declaration moved to i915_atomic.h Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-5-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-5-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Eric Anholt <eric@anholt.net> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [for rcar lvds] Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-5-sean@poorly.run
2019-06-08drm: rcar-du: Add support for missing 16-bit RGB1555 formatsLaurent Pinchart1-0/+30
Add support for the DRM_FORMAT_RGBA5551, DRM_FORMAT_RGBX5551, DRM_FORMAT_ABGR1555, DRM_FORMAT_XBGR1555, DRM_FORMAT_BGRA5551 and DRM_FORMAT_BGRX5551 formats to the DU driver. Those formats are only available on Gen3. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Daniel Vetter <daniel@ffwll.ch>
2019-06-08drm: rcar-du: Add support for missing 16-bit RGB4444 formatsLaurent Pinchart1-0/+30
Add support for the DRM_FORMAT_RGBA4444, DRM_FORMAT_RGBX4444, DRM_FORMAT_ABGR4444, DRM_FORMAT_XBGR4444, DRM_FORMAT_BGRA4444 and DRM_FORMAT_BGRX4444 formats to the DU driver. Those formats are only available on Gen3. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Daniel Vetter <daniel@ffwll.ch>
2019-06-08drm: rcar-du: Add support for missing 32-bit RGB formatsLaurent Pinchart1-0/+20
Add support for the DRM_FORMAT_RGBA8888, DRM_FORMAT_RGBX8888, DRM_FORMAT_ABGR8888 and DRM_FORMAT_XBGR8888 formats to the DU driver. Those formats are only available on Gen3. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Daniel Vetter <daniel@ffwll.ch>
2019-06-08drm: rcar-du: Skip LVDS1 output on Gen3 when using dual-link LVDS modeLaurent Pinchart2-1/+13
In dual-link LVDS mode, the LVDS1 encoder is used as a companion for LVDS0, and both encoders transmit data from DU0. The LVDS1 output of DU1 can't be used in that case, don't create an encoder and connector for it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2019-06-08drm: rcar-du: lvds: Add support for dual-link modeLaurent Pinchart2-13/+99
In dual-link mode the LVDS0 encoder transmits even-numbered pixels, and sends odd-numbered pixels to the LVDS1 encoder for transmission on a separate link. To implement support for this mode of operation, determine if the LVDS connection operates in dual-link mode by querying the next device in the pipeline, locate the companion encoder, and control it directly through its bridge operations. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2019-06-08drm: rcar-du: lvds: Remove LVDS double-enable checksLaurent Pinchart1-19/+0
The DRM core and DU driver guarantee that the LVDS bridge will not be double-enabled or double-disabled. Remove the corresponding unnecessary checks. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2019-06-08drm: rcar-du: writeback: include interface headerKieran Bingham1-0/+1
The new writeback feature exports functions so that they can integrate into the rcar_du_kms module. The interface functions are defined in the rcar_du_writeback header, but it is not included in the object file itself leading to compiler warnings for missing prototypes. Include the header as appropriate. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-06-08drm: rcar-du: lvds: Add r8a774a1 supportBiju Das1-0/+1
The LVDS encoders on RZ/G2M SoC is similar to R-Car M3-W. Add support for RZ/G2M (R8A774A1) SoC to the LVDS encoder driver. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-06-08drm: rcar-du: Add R8A774A1 supportBiju Das1-0/+30
Add support for the R8A774A1 DU (which is very similar to the R8A7796 DU except that it lacks TCON and CMM); it has one RGB output, one LVDS output and one HDMI output. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2019-03-28drm: rcar-du: lvds: Set LVEN and LVRES bits together on D3Laurent Pinchart1-2/+6
On the D3 SoC the LVDS PHY must be enabled in the same register write that enables the LVDS output. Skip writing the LVEN bit independently on that platform, it will be set by the write that sets LVRES. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-31 16:35:17 +0000