summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/radeon/radeon_drv.c
AgeCommit message (Collapse)AuthorFilesLines
2014-04-19Merge branch 'drm-next-3.15-wip' of ↵Dave Airlie1-1/+1
git://people.freedesktop.org/~deathsimple/linux into drm-next Some i2c fixes over DisplayPort. * 'drm-next-3.15-wip' of git://people.freedesktop.org/~deathsimple/linux: drm/radeon: Improve vramlimit module param documentation drm/radeon: fix audio pin counts for DCE6+ (v2) drm/radeon/dp: switch to the common i2c over aux code drm/dp/i2c: Update comments about common i2c over dp assumptions (v3) drm/dp/i2c: send bare addresses to properly reset i2c connections (v4) drm/radeon/dp: handle zero sized i2c over aux transactions (v2) drm/i915: support address only i2c-over-aux transactions drm/tegra: dp: Support address-only I2C-over-AUX transactions
2014-04-17drm/radeon: fix runpm handling on APUs (v4)Alex Deucher1-20/+4
Don't try and runtime suspend the APU in PX systems. We only want to power down the dGPU. v2: fix harder v3: fix stupid typo v4: consolidate runpm enablement to a single flag bugs: https://bugs.freedesktop.org/show_bug.cgi?id=75127 https://bugzilla.kernel.org/show_bug.cgi?id=72701 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-04-08drm/radeon: Improve vramlimit module param documentationLauri Kasanen1-1/+1
Signed-off-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2014-04-03drm/radeon: fix runtime suspend breaking secondary GPUsDave Airlie1-5/+12
Same fix as for nouveau, when we fail with EINVAL, subsequent gets fail hard, causing the device not to open. Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-25drm/radeon: set PIPE_CONFIG for 1D and linear tiling modes on CIKMarek Olšák1-1/+2
This fixes fast color clear with 1D-tiled single-sample surfaces and Hyper-Z corruption with 1D-tiled depth surfaces. Even though it seems it is not needed for 1D tiling, CMASK and HTILE are always 2D-tiled, thus the hw needs to know the actual pipe configuration for CMASK and HTILE addressing no matter what the tiling mode of the surface is. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-03-03drm/radeon: add a way to get and set initial buffer domains v2Marek Olšák1-1/+2
When passing buffers between processes, the receiving process needs to know the original buffer domain, so that it doesn't accidentally move the buffer. v2: reserve the buffer Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2014-02-06drm/radeon: allow geom rings to be setup on r600/r700 (v2)Dave Airlie1-1/+2
the evergreen CS parser has allowed this for a while, just port the code to the r600 one. This is required before geom shaders can be made work. v2: agd5f: minor cleanup and add additional 7xx reg. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-01-29drm/radeon/runpm: don't runtime suspend non-PX cardsAlex Deucher1-0/+6
Prevent runtime suspend of non-PX GPUs. Runtime suspend is not what we want in those cases. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-01-20drm: Pass 'flags' from the caller to .get_scanout_position()Ville Syrjälä1-0/+1
Preparation for moving the early vblank IRQ logic into radeon_get_crtc_scanoutpos(). v2: Fix radeon_drv.c compile warning (Mario) Reviewed-by: mario.kleiner.de@gmail.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2014-01-20Merge branch 'drm-intel-next' of ↵Dave Airlie1-11/+2
git://people.freedesktop.org/~danvet/drm-intel into drm-next drm-intel-next-2014-01-10: - final bits for runtime D3 on Haswell from Paul (now enabled fully) - parse the backlight modulation freq information in the VBT from Jani (but not yet used) - more watermark improvements from Ville for ilk-ivb and bdw - bugfixes for fastboot from Jesse - watermark fix for i830M (but not yet everything) - vlv vga hotplug w/a (Imre) - piles of other small improvements, cleanups and fixes all over Note that the pull request includes a backmerge of the last drm-fixes pulled into Linus' tree - things where getting a bit too messy. So the shortlog also contains a bunch of patches from Linus tree. Please yell if you want me to frob it for you a bit. * 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel: (609 commits) drm/i915/bdw: make sure south port interrupts are enabled properly v2 drm/i915: Include more information in disabled hotplug interrupt warning drm/i915: Only complain about a rogue hotplug IRQ after disabling drm/i915: Only WARN about a stuck hotplug irq ONCE drm/i915: s/hotplugt_status_gen4/hotplug_status_g4x/
2014-01-08drm/radeon: add hard_reset module parameterAlex Deucher1-0/+4
Enabling this parameter enables pci config reset, aka hard reset, which is a bus level chip reset. In some cases this works more reliably than a soft reset. Disabled by default. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-23drm/radeon: Bump version for CIK DCE tiling fixAlex Deucher1-1/+2
Note when CIK DCE tiling was fixed. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-18drm: Kill DRM_IRQ_ARGSDaniel Vetter1-1/+1
I've killed them a long time ago in drm/i915, let's get rid of this remnant of shared drm core days for good. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-12Revert "drm/radeon: Implement radeon_pci_shutdown"Alex Deucher1-10/+0
This causes a race condition between drm_dev_unregister() and pci_driver.shutdown at shutdown or driver unload time. We need to revisit how to properly support kexec within the drm. This reverts commit 846ae41ae99d314bf2a02784152208a6ddf7eddc.
2013-11-18drm/radeon/cik: Add macrotile mode array queryMichel Dänzer1-1/+2
This is required to properly calculate the tiling parameters in userspace. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08Merge tag 'drm-intel-fixes-2013-11-07' of ↵Dave Airlie1-2/+2
git://people.freedesktop.org/~danvet/drm-intel into drm-next Bit a bit -fixes pull request in the merge window than usual dua to two feauture-y things: - Display CRCs are now enabled on all platforms, including the odd DP case on gm45/vlv. Since this is a testing-only feature it should ever hurt, but I figured it'll help with regression-testing -fixes. So I left it in and didn't postpone it to 3.14. - Display power well refactoring from Imre. Would have caused major pain conflict with the bdw stage 1 patches if I'd postpone this to -next. It's only an relatively small interface rework, so shouldn't cause pain. It's also been in my tree since almost 3 weeks already. That accounts for about two thirds of the pull, otherwise just bugfixes: - vlv backlight fix from Jesse/Jani - vlv vblank timestamp fix from Jesse - improved edp detection through vbt from Ville (fixes a vlv issue) - eDP vdd fix from Paulo - fixes for dvo lvds on i830M - a few smaller things all over Note: This contains a backmerge of v3.12. Since the -internal branch always applied on top of -nightly I need that unified base to merge bdw patches. So you'll get a conflict with radeon connector props when pulling this (and nouveau/master will also conflict a bit when Ben doesn't rebase). The backmerge itself only had conflicts in drm/i915. There's also a tiny conflict between Jani's backlight fix and your sysfs lifetime fix in drm-next. * tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits) drm/i915/vlv: use per-pipe backlight controls v2 drm/i915: make backlight functions take a connector drm/i915: move opregion asle request handling to a work queue drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV drm/i915: Make intel_dp_is_edp() less specific drm/i915: Give names to the VBT child device type bits drm/i915/vlv: enable HDA display audio for Valleyview2 drm/i915/dvo: call ->mode_set callback only when the port is running drm/i915: avoid unclaimed registers when capturing the error state drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv drm/i915: scramble reset support for DP port CRC on vlv drm/i915: scramble reset support for DP port CRC on g4x drm/i916: add "auto" pipe CRC source ... Conflicts: MAINTAINERS drivers/gpu/drm/i915/intel_panel.c drivers/gpu/drm/nouveau/core/subdev/mc/base.c drivers/gpu/drm/radeon/atombios_encoders.c drivers/gpu/drm/radeon/radeon_connectors.c
2013-11-06drm/radeon: Push get_scanout_position() timestamping into kms driver.Mario Kleiner1-1/+2
Move the ktime_get() clock readouts and potential preempt_disable() calls from drm core into kms driver to make it compatible with the api changes in the drm core. This should not introduce any change in functionality or behaviour in radeon-kms, just a reshuffling of code. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-04Merge tag 'v3.12' into drm-intel-nextDaniel Vetter1-2/+2
I want to merge in the new Broadwell support as a late hw enabling pull request. But since the internal branch was based upon our drm-intel-nightly integration branch I need to resolve all the oustanding conflicts in drm/i915 with a backmerge to make the 60+ patches apply properly. We'll propably have some fun because Linus will come up with a slightly different merge solution. Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/i915_drv.c drivers/gpu/drm/i915/intel_crt.c drivers/gpu/drm/i915/intel_ddi.c drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_dp.c drivers/gpu/drm/i915/intel_drv.h All rather simple adjacent lines changed or partial backports from -next to -fixes, with the exception of the thaw code in i915_dma.c. That one needed a bit of shuffling to restore the intent. Oh and the massive header file reordering in intel_drv.h is a bit trouble. But not much. v2: Also don't forget the fixup for the silent conflict that results in compile fail ... Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-11-01drm/radeon: Implement radeon_pci_shutdownMarkus Trippelsdorf1-0/+10
Currently radeon devices are not properly shutdown during kexec. This causes a varity of issues, e.g. dpm initialization failures. Fix this by implementing a radeon_pci_shutdown function, that unloads the driver cleanly. Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01drm/radeon: add runtime PM support (v2)Dave Airlie1-9/+113
This hooks radeon up to the runtime PM system to enable dynamic power management for secondary GPUs in switchable and powerxpress laptops. v2: agd5f: clean up, add module parameter Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01drm/radeon: convert to pmopsDave Airlie1-14/+34
This is a pre-requisite for runtime pm on powerxpress systems. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-18drm/radeon: rework audio optionAlex Deucher1-2/+2
In 3.12 I changed audio to be enabled by default, but you still had to turn it on via xrandr. This was confusing to users so change it to minic the previous behavior: - audio option is set to -1 (auto) by default which is the current 3.12 behavior (audio is enabled but requires xrandr to turn it on). - if audio = 1, the audio is enabled without needing to mess with xrandr (previous behavior) - audio = 0 disables audio It retains the new feature of allowing the user to enable audio on the fly with xrandr, but turns audio on automatically if radeon.audio=1 is set which is what most users expect. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2013-10-09drm: kill ->gem_init_object() and friendsDavid Herrmann1-2/+0
All drivers embed gem-objects into their own buffer objects. There is no reason to keep drm_gem_object_alloc(), gem->driver_private and ->gem_init_object() anymore. New drivers are highly encouraged to do the same. There is no benefit in allocating gem-objects separately. Cc: Dave Airlie <airlied@gmail.com> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Ben Skeggs <skeggsb@gmail.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-11drm/radeon: add a connector property for audioAlex Deucher1-1/+1
This provides a connector property to enable/disable hdmi audio on the fly. The default is disabled, but you can select auto (let the driver detect an audio capable monitor and enable it) or enabled (force audio enabled). This also enables audio by default so you no longer need a module parameter to enable audio. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-09-02drm/radeon: support render nodesChristian König1-1/+1
Enable support for drm render nodes for radeon by flagging the ioctls that are safe and just needed for rendering. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-02Merge branch 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie1-2/+2
into drm-next Alex writes: This is the radeon drm-next request. Big changes include: - support for dpm on CIK parts - support for ASPM on CIK parts - support for berlin GPUs - major ring handling cleanup - remove the old 3D blit code for bo moves in favor of CP DMA or sDMA - lots of bug fixes [airlied: fix up a bunch of conflicts from drm_order removal] * 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits) drm/radeon/dpm: make sure dc performance level limits are valid (CI) drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2) drm/radeon: gcc fixes for extended dpm tables drm/radeon: gcc fixes for kb/kv dpm drm/radeon: gcc fixes for ci dpm drm/radeon: gcc fixes for si dpm drm/radeon: gcc fixes for ni dpm drm/radeon: gcc fixes for trinity dpm drm/radeon: gcc fixes for sumo dpm drm/radeonn: gcc fixes for rv7xx/eg/btc dpm drm/radeon: gcc fixes for rv6xx dpm drm/radeon: gcc fixes for radeon_atombios.c drm/radeon: enable UVD interrupts on CIK drm/radeon: fix init ordering for r600+ drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume radeon kms: fix uninitialised hotplug work usage in r100_irq_process() drm/radeon/audio: set up the sads on DCE3.2 asics drm/radeon: fix handling of variable sized arrays for router objects ... Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/i915_gem_dmabuf.c drivers/gpu/drm/i915/intel_pm.c drivers/gpu/drm/radeon/cik.c drivers/gpu/drm/radeon/ni.c drivers/gpu/drm/radeon/r600.c
2013-08-30drm/radeon: default to 1024M gart size on rv770+Alex Deucher1-2/+2
Newer asics have a lot of vram so it's less of an issue to waste a little more space for the gart page table. This gives us some additional gart space before having to migrate to non-gart system ram for games, etc. where we use up most of vram. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-19drm: rip out drm_core_has_MTRR checksDaniel Vetter1-2/+2
The new arch_phys_wc_add/del functions do the right thing both with and without MTRR support in the kernel. So we can drop these additional checks. David Herrmann suggest to also kill the DRIVER_USE_MTRR flag since it's now unused, which spurred me to do a bit a better audit of the affected drivers. David helped a lot in that. Quoting our mail discussion: On Wed, Jul 10, 2013 at 5:41 PM, David Herrmann <dh.herrmann@gmail.com> wrote: > On Wed, Jul 10, 2013 at 5:22 PM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote: >> On Wed, Jul 10, 2013 at 3:51 PM, David Herrmann <dh.herrmann@gmail.com> wrote: >>>> -#if __OS_HAS_MTRR >>>> -static inline int drm_core_has_MTRR(struct drm_device *dev) >>>> -{ >>>> - return drm_core_check_feature(dev, DRIVER_USE_MTRR); >>>> -} >>>> -#else >>>> -#define drm_core_has_MTRR(dev) (0) >>>> -#endif >>>> - >>> >>> That was the last user of DRIVER_USE_MTRR (apart from drivers setting >>> it in .driver_features). Any reason to keep it around? >> >> Yeah, I guess we could rip things out. Which will also force me to >> properly audit drivers for the eventual behaviour change this could >> entail (in case there's an x86 driver which did not ask for an mtrr, >> but iirc there isn't). > > david@david-mb ~/dev/kernel/linux $ for i in drivers/gpu/drm/* ; do if > test -d "$i" ; then if ! grep -q USE_MTRR -r $i ; then echo $i ; fi ; > fi ; done > drivers/gpu/drm/exynos > drivers/gpu/drm/gma500 > drivers/gpu/drm/i2c > drivers/gpu/drm/nouveau > drivers/gpu/drm/omapdrm > drivers/gpu/drm/qxl > drivers/gpu/drm/rcar-du > drivers/gpu/drm/shmobile > drivers/gpu/drm/tilcdc > drivers/gpu/drm/ttm > drivers/gpu/drm/udl > drivers/gpu/drm/vmwgfx > david@david-mb ~/dev/kernel/linux $ > > So for x86 gma500,nouveau,qxl,udl,vmwgfx don't set DRIVER_USE_MTRR. > But I cannot tell whether they break if we call arch_phys_wc_add/del, > anyway. At least nouveau seemed to work here, but it doesn't use AGP > or drm_bufs, I guess. Cool, thanks a lot for stitching together the list of drivers to look at. So for real KMS drivers it's the drives responsibility to add an mtrr if it needs one. nouvea, radeon, mgag200, i915 and vmwgfx do that already. Somehow the savage driver also ends up doing that, I have no idea why. Note that gma500 as a pure KMS driver doesn't need MTRR setup since the platforms that it supports all support PAT. So no MTRRs needed to get wc iomappings. The mtrr support in the drm core is all for legacy mappings of garts, framebuffers and registers. All legacy drivers set the USE_MTRR flag, so we're good there. All in all I think we can really just ditch this /endquote v2: Also kill DRIVER_USE_MTRR as suggested by David Herrmann v3: Rebase on top of David Herrmann's agp setup/cleanup changes. Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm: remove FASYNC supportDaniel Vetter1-2/+0
So I've stumbled over drm_fasync and wondered what it does. Digging that up is quite a story. First I've had to read up on what this does and ended up being rather bewildered why peopled loved signals so much back in the days that they've created SIGIO just for that ... Then I wondered how this ever works, and what that strange "No-op." comment right above it should mean. After all calling the core fasync helper is pretty obviously not a noop. After reading through the kernels FASYNC implementation I've noticed that signals are only sent out to the processes attached with FASYNC by calling kill_fasync. No merged drm driver has ever done that. After more digging I've found out that the only driver that ever used this is the so called GAMMA driver. I've frankly never heard of such a gpu brand ever before. Now FASYNC seems to not have been the only bad thing with that driver, since Dave Airlie removed it from the drm driver with prejudice: commit 1430163b4bbf7b00367ea1066c1c5fe85dbeefed Author: Dave Airlie <airlied@linux.ie> Date: Sun Aug 29 12:04:35 2004 +0000 Drop GAMMA DRM from a great height ... Long story short, the drm fasync support seems to be doing absolutely nothing. And the only user of it was never merged into the upstream kernel. And we don't need any fops->fasync callback since the fcntl implementation in the kernel already implements the noop case correctly. So stop this particular cargo-cult and rip it all out. v2: Kill drm_fasync assignments in rcar (newly added) and imx drivers (somehow I've missed that one in staging). Also drop the reference in the drm DocBook. ARM compile-fail reported by Rob Clark. v3: Move the removal of dev->buf_asnyc assignment in drm_setup to this patch here. v4: Actually git add ... tsk. Cc: Dave Airlie <airlied@linux.ie> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Rob Clark <robdclark@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm/radeon: kill firstopen callback for kms driverDaniel Vetter1-2/+0
Again, it does nothing. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-07drm: const'ify ioctls table (v2)Rob Clark1-1/+1
Because, there is no reason for it not to be const. v1: original v2: fix compile break in vmwgfx, and couple related cleanups suggested by Ville Syrjälä Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-07drm/gem: create drm_gem_dumb_destroyDaniel Vetter1-4/+1
All the gem based kms drivers really want the same function to destroy a dumb framebuffer backing storage object. So give it to them and roll it out in all drivers. This still leaves the option open for kms drivers which don't use GEM for backing storage, but it does decently simplify matters for gem drivers. Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org> Cc: Ben Skeggs <skeggsb@gmail.com> Reviwed-by: Rob Clark <robdclark@gmail.com> Cc: Alex Deucher <alexdeucher@gmail.com> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-07-23drm/radeon: remove DRIVER_HAS_DMA/SG/PCI_DMA from the kms driverDaniel Vetter1-2/+2
Really, this is all old-style stuff and just copy-pasta from the ums driver. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-23drm/radoen: kill radeon_dma_ioctl_kmsDaniel Vetter1-3/+0
No need to create a dummy ioctl function to return -EINVAL, since that's what the core already does in the absence of the dma_ioctl callback. So we can safely remove this. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-17drm/radeon: add a module parameter to disable aspmAlex Deucher1-0/+4
Can cause hangs when enabled in certain motherboards. Set radeon.aspm=0 to disable aspm. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-28drm/radeon: implement unpin function, v2Maarten Lankhorst1-0/+2
Changes since v1: - Fixup compiler warning in unpin function. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-27drm/radeon/kms: add common dpm infrastructureAlex Deucher1-0/+4
This adds the common dpm (dynamic power management) infrastructure: - dpm callbacks - dpm init/fini/suspend/resume - dpm power state selection No device specific code is enabled yet. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: add cik tile mode array queryAlex Deucher1-1/+2
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-05-17drm/radeon: restore nomodeset operation (v2)Dave Airlie1-1/+11
When UMS was deprecated it removed support for nomodeset commandline we really want this in distro land so we can debug stuff, everyone should fallback to vesa correctly. v2: oops -1 isn't used anymore, restore original behaviour -1 is default, so we can boot with nomodeset on the command line, then use radeon.modeset=1 to override it for debugging later. Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-11drm/radeon: add si tile mode array query v3Jerome Glisse1-1/+2
Allow userspace to query for the tile mode array so userspace can properly compute surface pitch and alignment requirement depending on tiling. v2: Make strict aliasing safer by casting to char when copying v3: merge fix from Christian Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-11drm/radeon: add ring working queryChristian König1-1/+2
Add new ioctl option and bumb minor version number. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-09drm/radeon: Use direct mapping for fast fb access on RS690Samuel Li1-1/+6
This patch allows the CPU to map the stolen vram segment directly rather than going through the PCI BAR. This significantly improves performance for certain workloads with a properly patched ddx. Use radeon.fastfb=1 to enable it (disabled by default). Currently only supported on RS690, but support for RS780/880 and newer APUs may be added eventually. Signed-off-by: Samuel Li <samuel.li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-03-07drm/radeon: don't check mipmap alignment if MIP_ADDRESS is FMASKMarek Olšák1-1/+2
The MIP_ADDRESS state has 2 meanings. If the texture has one sample per pixel, it's a pointer to the mipmap chain. If the texture has multiple samples per pixel, it's a pointer to FMASK, a metadata buffer needed for reading compressed MSAA textures. The mipmap alignment rules do not apply to FMASK. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-08drm/radeon: use prime helpersAaron Plattner1-7/+14
Simplify the Radeon prime implementation by using the default behavior provided by drm_gem_prime_import and drm_gem_prime_export. v2: - Rename functions to radeon_gem_prime_get_sg_table and radeon_gem_prime_import_sg_table. - Delete the now-unused vmapping_count variable. Signed-off-by: Aaron Plattner <aplattner@nvidia.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-01-31drm/radeon: Deprecate UMS support v2Christian König1-33/+37
KMS support is out and stable for a couple of years now and the userspace code has deprecated or abandoned the old UMS interface. So make the KMS interface the default and deprecate the UMS interface in the kernel as well. v2: rebased on alex/drm-next-3.9-wip Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-15drm/radeon: allow FP16 color clear registers on r500Marek Olšák1-1/+2
Probably not a candidate for stable kernels because of conflicts in DRM versioning. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-03Drivers: gpu: remove __dev* attributes.Greg Kroah-Hartman1-2/+2
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-19drm/radeon: add support for MEM_WRITE packetJerome Glisse1-1/+2
To make it easier to debug some lockup from userspace add support to MEM_WRITE packet. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-14drm/radeon: bump version for CS ioctl support for async DMAAlex Deucher1-1/+2
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-14drm/radeon: fix htile buffer size computation for command stream checkerJerome Glisse1-1/+2
Fix the size computation of the htile buffer. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-17 15:05:48 +0000