summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/radeon/r600_hdmi.c
AgeCommit message (Collapse)AuthorFilesLines
2013-09-25drm/radeon: fix hdmi audio on DCE3.0/3.1 asicsAlex Deucher1-5/+15
These asics seem to use a mix of the DCE2.x and DCE3.2 audio interfaces despite what the register spec says. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=69729 https://bugs.freedesktop.org/show_bug.cgi?id=69671 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon/audio: set up the sads on DCE3.2 asicsAlex Deucher1-1/+65
This sets up the short audio descriptors properly on DCE3.2 asics for hdmi audio. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: set speaker allocation for DCE3.2Alex Deucher1-0/+42
This updates the audio driver to the speaker allocation block from the EDID. A similar change was just implemented for DCE4-8. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: add audio support for DCE6/8 GPUs (v12)Alex Deucher1-1/+6
Similar to DCE4/5, but supports multiple audio pins which can be assigned per afmt block. v2: rework the driver to handle more than one audio pin. v3: try different dto reg v4: properly program dto v5 (ck): change dto programming order v6: program speaker allocation block v7: rebase v8: rebase on Rafał's changes v9: integrated Rafał's comments, update to latest drm_edid_to_speaker_allocation API v10: add missing line break in error message v11: add back audio enabled messages v12: fix copy paste typo in r600_audio_enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Rafał Miłecki <zajec5@gmail.com>
2013-08-07drm/radeon: fix audio dto calculation on DCE3+ (v3)Alex Deucher1-4/+29
Need to set the wallclock ratio and adjust the phase and module registers appropriately. May fix problems with audio timing at certain display timings. v2: properly handle clocks below 24mhz v3: rebase r600 changes Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon: select audio dto based on encoder id for DCE3Alex Deucher1-3/+9
There are two audio dtos on radeon asics that you can select between. Normally, dto0 is used for hdmi and dto1 for DP, but it seems that the dto is somehow tied to the encoders on DCE3 asics. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=67435 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-07-14drm/radeon/hdmi: make sure we have an afmt block assignedAlex Deucher1-0/+6
Prevents a segfault if an afmt block is not assigned to the encoder such as in the LVDS or eDP case. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=66714 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-06-12drm/radeon: fix AVI infoframe generationAlex Deucher1-9/+2
- remove adding 2 to checksum, this is incorrect. This was incorrectly introduced in: 92db7f6c860b8190571a9dc1fcbc16d003422fe8 http://lists.freedesktop.org/archives/dri-devel/2011-December/017717.html However, the off by 2 was due to adding the version twice. From the examples in the URL above: [Rafał Miłecki][RV620] fglrx: 0x7454: 00 A8 5E 79 R600_HDMI_VIDEOINFOFRAME_0 0x7458: 00 28 00 10 R600_HDMI_VIDEOINFOFRAME_1 0x745C: 00 48 00 28 R600_HDMI_VIDEOINFOFRAME_2 0x7460: 02 00 00 48 R600_HDMI_VIDEOINFOFRAME_3 =================== (0x82 + 0x2 + 0xD) + 0x1F8 = 0x289 -0x289 = 0x77 However, the payload sum is not 0x1f8, it's 0x1f6. 00 + A8 + 5E + 00 + 00 + 28 + 00 + 10 + 00 + 48 + 00 + 28 + 00 + 48 = 0x1f6 Bits 25:24 of HDMI_VIDEOINFOFRAME_3 are the packet version, not part of the payload. So the total would be: (0x82 + 0x2 + 0xD) + 0x1f6 = 0x287 -0x287 = 0x79 - properly emit the AVI infoframe version. This was not being emitted previous which is probably what caused the issue above. This should fix blank screen when HDMI audio is enabled on certain monitors. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Cc: Rafał Miłecki <zajec5@gmail.com>
2013-05-20drm/radeon/dce2: use 10khz units for audio dto calculationAlex Deucher1-5/+4
Avoids overflows on DCE2.x devices. Also clarify the calculation on other asics. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-04-23drm/radeon: fix up audio dto programming for DCE2Alex Deucher1-3/+12
Uses a different register than DCE3 asics. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-23drm/radeon: switch audio handling to use callbacksAlex Deucher1-74/+35
Register audio callbacks for asic where we support audio. Cleans up the code and makes it easier to add support for newer asics. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-23drm/radeon: clean up audio dto programmingAlex Deucher1-1/+25
Split into DCE2/3 and DCE4/5 variants. Still todo is to calculate the DTO dividers properly. Add proper formula to the comments. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-22drm/radeon: disable audio format interrupts on EvergreenAlex Deucher1-1/+3
The audio format change interrupts are an aid in debugging, but not required for operation. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-22drm/radeon: fix hdmi mode enable on RS600/RS690/RS740Alex Deucher1-2/+2
These chips were previously skipped since they are pre-R600. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-04-22drm/radeon: add helpers for masking and setting bits in regsRafał Miłecki1-10/+6
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-22drm/radeon: Use generic HDMI infoframe helpersThierry Reding1-95/+39
Use the generic HDMI infoframe helpers to get rid of the duplicate implementation in the radeon driver. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-20drm/radeon: remove overzealous warning in hdmi handlingAlex Deucher1-1/+0
hdmi audio works fine. The warning just confuses users. fixes: https://bugzilla.kernel.org/show_bug.cgi?id=44341 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org
2012-10-03Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-1/+1
Pull drm merge (part 1) from Dave Airlie: "So first of all my tree and uapi stuff has a conflict mess, its my fault as the nouveau stuff didn't hit -next as were trying to rebase regressions out of it before we merged. Highlights: - SH mobile modesetting driver and associated helpers - some DRM core documentation - i915 modesetting rework, haswell hdmi, haswell and vlv fixes, write combined pte writing, ilk rc6 support, - nouveau: major driver rework into a hw core driver, makes features like SLI a lot saner to implement, - psb: add eDP/DP support for Cedarview - radeon: 2 layer page tables, async VM pte updates, better PLL selection for > 2 screens, better ACPI interactions The rest is general grab bag of fixes. So why part 1? well I have the exynos pull req which came in a bit late but was waiting for me to do something they shouldn't have and it looks fairly safe, and David Howells has some more header cleanups he'd like me to pull, that seem like a good idea, but I'd like to get this merge out of the way so -next dosen't get blocked." Tons of conflicts mostly due to silly include line changes, but mostly mindless. A few other small semantic conflicts too, noted from Dave's pre-merged branch. * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (447 commits) drm/nv98/crypt: fix fuc build with latest envyas drm/nouveau/devinit: fixup various issues with subdev ctor/init ordering drm/nv41/vm: fix and enable use of "real" pciegart drm/nv44/vm: fix and enable use of "real" pciegart drm/nv04/dmaobj: fixup vm target handling in preparation for nv4x pcie drm/nouveau: store supported dma mask in vmmgr drm/nvc0/ibus: initial implementation of subdev drm/nouveau/therm: add support for fan-control modes drm/nouveau/hwmon: rename pwm0* to pmw1* to follow hwmon's rules drm/nouveau/therm: calculate the pwm divisor on nv50+ drm/nouveau/fan: rewrite the fan tachometer driver to get more precision, faster drm/nouveau/therm: move thermal-related functions to the therm subdev drm/nouveau/bios: parse the pwm divisor from the perf table drm/nouveau/therm: use the EXTDEV table to detect i2c monitoring devices drm/nouveau/therm: rework thermal table parsing drm/nouveau/gpio: expose the PWM/TOGGLE parameter found in the gpio vbios table drm/nouveau: fix pm initialization order drm/nouveau/bios: check that fixed tvdac gpio data is valid before using it drm/nouveau: log channel debug/error messages from client object rather than drm client drm/nouveau: have drm debugging macros build on top of core macros ...
2012-10-02UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/David Howells1-2/+2
Convert #include "..." to #include <path/...> in drivers/gpu/. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-09-20drm/radeon: Mark all possible functions / structs as staticLauri Kasanen1-1/+1
Let's allow GCC to optimize better. This exposed some five unused functions, but this patch doesn't remove them. Signed-off-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-06-21drm/radeon: apply Murphy's law to the kms irq code v3Christian Koenig1-4/+2
1. It is really dangerous to have more than one spinlock protecting the same information. 2. radeon_irq_set sometimes wasn't called with lock protection, so it can happen that more than one CPU would tamper with the irq regs at the same time. 3. The pm.gui_idle variable was assuming that the 3D engine wasn't becoming idle between testing the register and setting the variable. So just remove it and test the register directly. v2: Also handle the hpd irq code the same way. v3: Rename hpd parameter for clarification. Signed-off-by: Christian Koenig <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-06-16drm/radeon: enable HDMI on DCE5 (AKA NI excluding Aruba)Rafał Miłecki1-5/+2
After recent changes HDMI code is ready to be enabled on DCE5. This patch just changes conditions to execute already present code on DCE5. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Christian König <christian.koenig@amd.com> Tested-by: Andre Heider <a.heider@gmail.com> Tested-by: Zoltán Böszörményi <zboszor@pr.hu> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-05drm/radeon/hdmi: don't set SEND_MAX_PACKETS bitRafał Miłecki1-1/+0
Many TVs and A/V receivers don't work with this bit set. Problem was confirmed using: Onkyo TX-SR605, Sony BRAVIA KDL-52X3500, Sony BRAVIA KDL-40S40xx. In theory this bit shouldn't affect audio engine when feeding it with data, however it seems it does. Driver fglrx doesn't set that bit in any of the above cases. This fixes a regression introduced by 3.5-rc1. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-22drm/radeon/hdmi: compile audio status in 1 functionRafał Miłecki1-18/+13
This optmizes calls, registers reads and assignments. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm/radeon/hdmi: use new AFMT structsRafał Miłecki1-93/+60
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-13drm/radeon/hdmi: fix some coding styleRafał Miłecki1-15/+32
Use defined macros by the way. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-13drm/radeon/hdmi: update modesettingRafał Miłecki1-15/+38
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-13drm/radeon/hdmi: separate evergreen codeRafał Miłecki1-8/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-13drm/radeon/kms/hdmi: helper getting ready ACR entryRafał Miłecki1-36/+29
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-13drm/radeon/kms/hdmi: clean&improve handling HDMI modeRafał Miłecki1-15/+27
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-13drm/radeon/kms/hdmi: enable audio packets at one placeRafał Miłecki1-10/+16
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-01drm/radeon/kms/hdmi: use relative offsets, official regsRafał Miłecki1-43/+47
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-01drm/radeon/kms: keep HDMI state in separated variableRafał Miłecki1-7/+9
If we want hdmi_offset to be relative to the first block, zero value can be used also for enabled block. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-01drm/radeon/kms: get rid of r600_hdmi_find_free_blockRafał Miłecki1-37/+8
R6xx has routable blocks, but there's nothing wrong in assignment based on dig_encoder. We didn't really need that algorithm. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-01drm/radeon/kms: get rid of hdmi_config_offsetRafał Miłecki1-10/+4
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-24drm/radeon/kms: fix up audio interrupt handlingAlex Deucher1-14/+3
- add support for rs6xx - add support for DCE4/5 - fixup 6xx/7xx Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-03drm/radeon/kms: define TMDS/LVTM HDMI enabling bitsRafał Miłecki1-4/+8
The names has been taken from free M76 specs. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-03drm/radeon/kms: workaround invalid AVI infoframe checksum issueRafał Miłecki1-0/+7
This change was verified to fix both issues with no video I've investigated. I've also checked checksum calculation with fglrx on: RV620, HD54xx, HD5450, HD6310, HD6320. Cc: stable@vger.kernel.org Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-03drm/radeon/kms: setup HDMI mode on Evergreen encodersRafał Miłecki1-8/+28
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-19drm/radeon/kms: minor HDMI audio cleanupsRafał Miłecki1-3/+11
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-02-23radeon: consolidate asic-specific function decls for r600 & laterDaniel Vetter1-0/+1
Now all the asic specific stuff ist mostly hid in radeon_asic.* Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms: enable HDMI audio on RS600/RS690/RS740Rafał Miłecki1-2/+4
We will need method of selecting encoder that should receive HDMI block. For now we assign HDMI block to first enabled encoder. Hopefully there are not many RS6x0 chips with two digital encoders. [airlied: add RS740 checks as per Alex suggestion.] Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-19drm/radeon: fix hdmi offset bug reported by smatch.Dave Airlie1-1/+1
Reported-by: Dan Carpenter Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-23drm/radeon/kms: HDMI irq supportChristian Koenig1-21/+33
Implements irq support for HDMI audio output. Now the polling timer is only enabled if irq support isn't available. Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-23drm/radeon/kms: rework audio polling timerChristian König1-6/+11
Rework HDMI audio polling timer, only enable it when at least one HDMI encoder needs it. Preparation for replacing it with irq support. Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19drm/radeon/kms/evergreen: don't enable hdmi audio stuffAlex Deucher1-0/+9
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: improve coding style a littleRafał Miłecki1-9/+9
We still have many magic numbers in HDMI/audio to define Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: add HDMI code for pre-DCE3 R6xx GPUsRafał Miłecki1-2/+69
Older GPUs are little different, HDMI blocks are not hard-wired, but routable. We should just find some free HDMI block and route it to choosen encoder. In case of RS6x0 there is only one HDMI block, we don't enable HDMI on RS6x00 yet however. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: clean assigning HDMI blocks to encodersRafał Miłecki1-65/+49
We almost always used first HDMI block for first encoder and second for sencod. Exception was KLDSCP_LVTMA. Analyzing code picking DIG encoder shows the same behaviour. It shows HDMI block are related to DIGs, which relation we now use. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-22 08:47:16 +0000