summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/qxl
AgeCommit message (Collapse)AuthorFilesLines
2020-12-01drm/ttm/drivers: remove unecessary ttm_module.h include v2Christian König2-2/+0
ttm_module.h deals with internals of TTM and should never be include outside of it. v2: also move the file around Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/404885/
2020-11-30drm/qxl: switch to ttm_sg_tt_initChristian König1-1/+1
The function qxl_gem_prime_import_sg_table is not fully implemented. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/403833/
2020-11-17drm/qxl: Remove fbcon acceleration leftoversDaniel Vetter1-16/+2
These are leftovers from 13aff184ed9f ("drm/qxl: remove dead qxl fbdev emulation code"). v2: Somehow these structs provided the struct qxl_device pre-decl, reorder the header to not anger compilers. Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: spice-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20201029133347.4088884-1-daniel.vetter@ffwll.ch
2020-11-11drm/ttm: add multihop infrastrucutre (v3)Dave Airlie1-1/+2
Currently drivers get called to move a buffer, but if they have to move it temporarily through another space (SYSTEM->VRAM via TT) then they can end up with a lot of ttm->driver->ttm call stacks, if the temprorary space moves requires eviction. Instead of letting the driver do all the placement/space for the temporary, allow it to report back (-EMULTIHOP) and a placement (hop) to the move code, which will then do the temporary move, and the correct placement move afterwards. This removes a lot of code from drivers, at the expense of adding some midlayering. I've some further ideas on how to turn it inside out, but I think this is a good solution to the call stack problems. v2: separate out the driver patches, add WARN for getting MULTHOP in paths we shouldn't (Daniel) v3: use memset (Christian) Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: hristian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201109005432.861936-2-airlied@gmail.com
2020-11-09drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backendsThomas Zimmermann6-30/+55
This patch replaces the vmap/vunmap's use of raw pointers in GEM object functions with instances of struct dma_buf_map. GEM backends are converted as well. For most of them, this simply changes the returned type. TTM-based drivers now return information about the location of the memory, either system or I/O memory. GEM VRAM helpers and qxl now use ttm_bo_vmap() et al. Amdgpu, nouveau and radeon use drm_gem_ttm_vmap() et al instead of implementing their own vmap callbacks. v7: * init QXL cursor to mapped BO buffer (kernel test robot) v5: * update vkms after switch to shmem v4: * use ttm_bo_vmap(), drm_gem_ttm_vmap(), et al. (Daniel, Christian) * fix a trailing { in drm_gem_vmap() * remove several empty functions instead of converting them (Daniel) * comment uses of raw pointers with a TODO (Daniel) * TODO list: convert more helpers to use struct dma_buf_map Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Christian König <christian.koenig@amd.com> Tested-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-7-tzimmermann@suse.de
2020-11-08drm: remove unneeded breakTom Rix1-1/+0
A break is not needed if it is preceded by a return or break Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201019163115.25814-1-trix@redhat.com
2020-11-06drm/qxl: replace idr_init() by idr_init_base()Deepak R Varma1-2/+2
idr_init() uses base 0 which is an invalid identifier for this driver. The idr_alloc for this driver uses 1 as start value for ID range. The new function idr_init_base allows IDR to set the ID lookup from base 1. This avoids all lookups that otherwise starts from 0 since 0 is always unused / available. References: commit 6ce711f27500 ("idr: Make 1-based IDRs more efficient") Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20201105185016.GA71797@localhost Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-11-02drm/atomic: Pass the full state to CRTC atomic begin and flushMaxime Ripard1-1/+1
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the CRTC's atomic_begin and atomic_flush. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_begin(crtc, old_crtc_state); + FUNCS->atomic_begin(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier old_crtc_state, old_state; identifier crtc; identifier f; @@ f(struct drm_crtc_state *old_crtc_state) { ... struct drm_atomic_state *old_state = old_crtc_state->state; <... - FUNCS->atomic_flush(crtc, old_crtc_state); + FUNCS->atomic_flush(crtc, old_state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_begin(crtc, crtc_state); + FUNCS->atomic_begin(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; identifier dev, state; identifier f; @@ f(struct drm_device *dev, struct drm_atomic_state *state, ...) { <... - FUNCS->atomic_flush(crtc, crtc_state); + FUNCS->atomic_flush(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_begin)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_begin)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_flush)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_begin = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_flush = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @@ identifier old_state; identifier crtc; @@ void vc4_hvs_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @@ identifier old_state; identifier crtc; @@ void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ); @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-2-maxime@cerno.tech
2020-10-29drm/qxl: drop ttm_page_alloc.h includeChristian König1-1/+0
Not needed as far as I can see. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com> Tested-by: Huang Rui <ray.huang@amd.com> Link: https://patchwork.freedesktop.org/patch/397084/?series=83051&rev=1
2020-10-29drm/ttm: wire up the new pool as default one v2Christian König1-3/+2
Provide the necessary parameters by all drivers and use the new pool alloc when no driver specific function is provided. v2: fix the GEM VRAM helpers Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com> Tested-by: Huang Rui <ray.huang@amd.com> Link: https://patchwork.freedesktop.org/patch/397081/?series=83051&rev=1
2020-10-26drm/ttm: merge ttm_dma_tt back into ttm_ttChristian König1-1/+1
It makes no difference to kmalloc if the structure is 48 or 64 bytes in size. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/396950/
2020-10-22drm/ttm: replace last move_notify with delete_mem_notifyDave Airlie1-1/+6
The move notify callback is only used in one place, this should be removed in the future, but for now just rename it to the use case which is to notify the driver that the GPU memory is to be deleted. Drivers can be cleaned up after this separately. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201021044031.1752624-2-airlied@gmail.com
2020-10-21drm/ttm: move last binding into the drivers.Dave Airlie1-14/+0
This moves the call to tt binding into the driver move, and drops the driver callback. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201020010319.1692445-8-airlied@gmail.com
2020-10-21drm/ttm: drop move notify around move.Dave Airlie1-18/+27
The drivers now do this in the move callback. move_notify is still needed in the destroy path. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201020010319.1692445-7-airlied@gmail.com
2020-10-21drm/ttm: drop unbind callback.Dave Airlie1-7/+0
The drivers now control this, so drop unbinding. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201020010319.1692445-5-airlied@gmail.com
2020-10-15drm/ttm: nuke caching placement flagsChristian König2-6/+6
Changing the caching on the fly never really worked flawlessly. So stop this completely and just let drivers specific the desired caching in the tt or bus object. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://patchwork.freedesktop.org/patch/394256/
2020-10-15drm/ttm: add caching state to ttm_bus_placementChristian König1-0/+2
And implement setting it up correctly in the drivers. This allows getting rid of the placement flags for this. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://patchwork.freedesktop.org/patch/394254/
2020-10-15drm/ttm: set the tt caching state at creation timeChristian König1-1/+1
All drivers can determine the tt caching state at creation time, no need to do this on the fly during every validation. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://patchwork.freedesktop.org/patch/394253/
2020-10-09drm/atomic: Pass the full state to CRTC atomic enable/disableMaxime Ripard1-2/+2
If the CRTC driver ever needs to access the full DRM state, it can't do so at atomic_enable / atomic_disable time since drm_atomic_helper_swap_state will have cleared the pointer from the struct drm_crtc_state to the struct drm_atomic_state before calling those hooks. In order to allow that, let's pass the full DRM state to atomic_enable and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers and actually tested on vc4. virtual report @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_disable(crtc, crtc_state); + FUNCS->atomic_disable(crtc, state); ...> } @@ struct drm_crtc_helper_funcs *FUNCS; identifier dev, state; identifier crtc, crtc_state; @@ drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *state) { <... - FUNCS->atomic_enable(crtc, crtc_state); + FUNCS->atomic_enable(crtc, state); ...> } @@ identifier crtc, old_state; @@ struct drm_crtc_helper_funcs { ... - void (*atomic_enable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_enable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... - void (*atomic_disable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state); + void (*atomic_disable)(struct drm_crtc *crtc, struct drm_atomic_state *state); ... } @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_enable = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @ ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { ... when != old_state } @ adds_old_state depends on crtc_atomic_func && !ignores_old_state @ identifier crtc_atomic_func.func; identifier crtc, old_state; @@ void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { + struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc); ... } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; expression E; type T; @@ void func(...) { ... - T state = E; + T crtc_state = E; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; type T; @@ void func(...) { ... - T state; + T crtc_state; <+... - state + crtc_state ...+> } @ depends on crtc_atomic_func @ identifier crtc_atomic_func.func; identifier old_state; identifier crtc; @@ void func(struct drm_crtc *crtc, - struct drm_crtc_state *old_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/845aa10ef171fc0ea060495efef142a0c13f7870.1602161031.git-series.maxime@cerno.tech
2020-10-07drm/ttm: nuke ttm_bo_evict_mm and rename mgr function v3Christian König1-2/+8
Make it more clear what the resource manager function does and nuke the wrapper function. v2: nuke the wrapper v3: fix typo in radeon, rebased Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2) Link: https://patchwork.freedesktop.org/patch/393914/
2020-10-07drm/qxl: drop unused code (v2)Dave Airlie1-21/+8
v2: drop the wrapper struct Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201006000644.1005758-2-airlied@gmail.com
2020-09-29drm/qxl: fix usage of ttm_bo_initChristian König1-3/+5
We need to use ttm_bo_init_reserved here to make sure that the BO is pinned before it becomes visible on the LRU. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/392561/?series=82199&rev=1
2020-09-29drm/qxl: simplify the return expression of qxl_plane_prepare_fb()Qinglang Miao1-6/+1
Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200921131022.91649-1-miaoqinglang@huawei.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-24drm/qxl: switch over to the new pin interfaceChristian König7-39/+20
Stop using TTM_PL_FLAG_NO_EVICT. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Link: https://patchwork.freedesktop.org/patch/391607/?series=81973&rev=1
2020-09-24drm/ttm: add bo wait that takes a ctx wrapper.Dave Airlie1-1/+1
I'm thinking of pushing the wait into the drivers. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200923030454.362731-6-airlied@gmail.com
2020-09-24drm/qxl: kill unused bo wait wrapperDave Airlie1-23/+0
This wasn't used anywheere Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200923030454.362731-3-airlied@gmail.com
2020-09-18drm/ttm: flip tt destroy ordering.Dave Airlie1-0/+1
Call the driver first and have it call the common code cleanup. This is useful later to fix unbind. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-3-airlied@gmail.com
2020-09-15drm/ttm: remove available_cachingChristian König1-2/+1
Instead of letting TTM make an educated guess based on some mask all drivers should just specify what caching they want for their CPU mappings. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/390207/
2020-09-15drm/ttm: remove default cachingChristian König1-1/+1
As far as I can tell this was never used either and we just always fallback to the order cached > wc > uncached anyway. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/390142/
2020-09-14Merge drm/drm-next into drm-misc-nextMaxime Ripard1-2/+3
Paul Cercueil needs some patches in -rc5 to apply new patches for ingenic properly. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-09-11drm/ttm: nuke memory type flagsChristian König2-9/+18
It's not supported to specify more than one of those flags. So it never made sense to make this a flag in the first place. Nuke the flags and specify directly which memory type to use. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/389826/?series=81551&rev=1
2020-09-09drm/qxl: move bind/unbind/destroy to the driver function table.Dave Airlie1-7/+3
Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-4-airlied@gmail.com
2020-09-09drm/ttm: introduce ttm_bo_move_nullDave Airlie1-11/+1
This pattern is cut-n-pasted across 4 drivers, switch it to a WARN_ON instead, as BUG_ON is considered a bad idea usually. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-2-airlied@gmail.com
2020-09-08drm/ttm: merge offset and base in ttm_bus_placementChristian König1-4/+3
This is used by TTM to communicate the physical address which should be used with ioremap(), ioremap_wc(). We don't need to separate the base and offset in any way here. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/389457/
2020-09-08drm/qxl: don't touch mem.bus.offsetChristian König1-3/+3
This is internal to TTM and should not be used by drivers directly. Drop the call to qxl_ttm_io_mem_reserve() and use mem->start instead. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/389456/
2020-09-08Merge tag 'v5.9-rc4' into drm-nextDave Airlie1-2/+3
Backmerge 5.9-rc4 as there is a nasty qxl conflict that needs to be resolved. Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-09-08drm/ttm: remove bdev from ttm_ttDave Airlie1-3/+6
I want to split this structure up and use it differently, step one remove bdev pointer from it and pass it explicitly. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826014428.828392-4-airlied@gmail.com
2020-08-24drm/ttm: init mem->bus in common code.Dave Airlie1-6/+0
The drivers all do the same thing here. Reviewed-by: Christian König <christian.koenig@amd.com> for both. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200811074658.58309-1-airlied@gmail.com
2020-08-18Merge v5.9-rc1 into drm-misc-nextMaxime Ripard1-2/+0
Sam needs 5.9-rc1 to have dev_err_probe in to merge some patches. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-08-17drm/qxl: Replace deprecated function in qxl_displaySidong Yang1-10/+11
Replace deprecated function drm_modeset_lock/unlock_all with helper function DRM_MODESET_LOCK_ALL_BEGIN/END. Signed-off-by: Sidong Yang <realwakka@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200524022624.10363-1-realwakka@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-08-17drm/qxl: don't take vga ports on rev5+Gerd Hoffmann1-3/+3
qemu 5.0 introduces a new qxl hardware revision 5. Unlike revision 4 (and below) the device doesn't switch back into vga compatibility mode when someone touches the vga ports. So we don't have to reserve the vga ports any more to avoid that happening. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20200807105501.24599-1-kraxel@redhat.com
2020-08-12Merge drm/drm-next into drm-misc-nextThomas Zimmermann1-2/+1
Backmerging drm-next into drm-misc-next for nouveau and panel updates. Resolves a conflict between ttm and nouveau, where struct ttm_mem_res got renamed to struct ttm_resource. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2020-08-07Merge tag 'pci-v5.9-changes' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Fix pci_cfg_wait queue locking problem (Bjorn Helgaas) - Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi Saheed) - Align PCIe capability and PCI accessor return values (Bolarinwa Olayemi Saheed) - Fix pci_create_slot() reference count leak (Qiushi Wu) - Announce device after early fixups (Tiezhu Yang) PCI device hotplug: - Make rpadlpar functions static (Wei Yongjun) Driver binding: - Add device even if driver attach failed (Rajat Jain) Virtualization: - xen: Remove redundant initialization of irq (Colin Ian King) IOMMU: - Add pci_pri_supported() to check device or associated PF (Ashok Raj) - Release IVRS table in AMD ACS quirk (Hanjun Guo) - Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng) - Treat "external-facing" devices themselves as internal (Rajat Jain) MSI: - Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr Stankiewicz) Error handling: - Clear PCIe Device Status errors only if OS owns AER (Jonathan Cameron) - Log correctable errors as warning, not error (Matt Jolly) - Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc Van Oostenryck) Peer-to-peer DMA: - Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe) ASPM: - Add missing newline in sysfs 'policy' (Xiongfeng Wang) Native PCIe controllers: - Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng) - Convert to devm_platform_ioremap_resource() (Dejin Zheng) - Remove duplicate error message from devm_pci_remap_cfg_resource() callers (Dejin Zheng) - Fix runtime PM imbalance on error (Dinghao Liu) - Remove dev_err() when handing an error from platform_get_irq() (Krzysztof Wilczyński) - Use pci_host_bridge.windows list directly instead of splicing in a temporary list for cadence, mvebu, host-common (Rob Herring) - Use pci_host_probe() instead of open-coding all the pieces for altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3, versatile, xgene, xilinx, xilinx-nwl (Rob Herring) - Default host bridge parent device to the platform device (Rob Herring) - Use pci_is_root_bus() instead of tracking root bus number separately in aardvark, designware (imx6, keystone, designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob Herring) - Set host bridge bus number in pci_scan_root_bus_bridge() instead of each driver for aardvark, designware-host, host-common, mediatek, rcar, tegra, v3-semi (Rob Herring) - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob Herring) - Set bridge map_irq and swizzle_irq to default functions; drivers that don't support legacy IRQs (iproc) need to undo this (Rob Herring) ARM Versatile PCIe controller driver: - Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring) Cadence PCIe controller driver: - Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property (Kishon Vijay Abraham I) - Remove "mem" from reg binding (Kishon Vijay Abraham I) - Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I) - Convert all r/w accessors to perform only 32-bit accesses (Kishon Vijay Abraham I) - Add support to start link and verify link status (Kishon Vijay Abraham I) - Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I) - Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I) - Fix updating Vendor ID and Subsystem Vendor ID register (Kishon Vijay Abraham I) - Use bridge resources for outbound window setup (Rob Herring) - Remove private bus number and range storage (Rob Herring) Cadence PCIe endpoint driver: - Add MSI-X support (Alan Douglas) HiSilicon PCIe controller driver: - Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring) Intel VMD host bridge driver: - Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick) Loongson PCIe controller driver: - Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang) Marvell Aardvark PCIe controller driver: - Indicate error in 'val' when config read fails (Pali Rohár) - Don't touch PCIe registers if no card connected (Pali Rohár) Marvell MVEBU PCIe controller driver: - Setup BAR0 in order to fix MSI (Shmuel Hazan) Microsoft Hyper-V host bridge driver: - Fix a timing issue which causes kdump to fail occasionally (Wei Hu) - Make some functions static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Revert tegra124 raw_violation_fixup (Nicolas Chauvet) - Remove PLL power supplies (Thierry Reding) Qualcomm PCIe controller driver: - Change duplicate PCI reset to phy reset (Abhishek Sahu) - Add missing ipq806x clocks in PCIe driver (Ansuel Smith) - Add missing reset for ipq806x (Ansuel Smith) - Add ext reset (Ansuel Smith) - Use bulk clk API and assert on error (Ansuel Smith) - Add support for tx term offset for rev 2.1.0 (Ansuel Smith) - Define some PARF params needed for ipq8064 SoC (Ansuel Smith) - Add ipq8064 rev2 variant (Ansuel Smith) - Support PCI speed set for ipq806x (Sham Muthayyan) Renesas R-Car PCIe controller driver: - Use devm_pci_alloc_host_bridge() (Rob Herring) - Use struct pci_host_bridge.windows list directly (Rob Herring) - Convert rcar-gen2 to use modern host bridge probe functions (Rob Herring) TI J721E PCIe driver: - Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I) Xilinx Versal CPM PCIe controller driver: - Add Versal CPM Root Port driver and YAML schema (Bharat Kumar Gogada) MicroSemi Switchtec management driver: - Add missing __iomem and __user tags to fix sparse warnings (Logan Gunthorpe) Miscellaneous: - Replace http:// links with https:// (Alexander A. Klimov) - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn Helgaas) - Remove unused pci_lost_interrupt() (Heiner Kallweit) - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen) - Fix kerneldoc warnings (Krzysztof Kozlowski)" * tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: Fix kerneldoc warnings PCI: xilinx-cpm: Add Versal CPM Root Port driver PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port PCI: Set bridge map_irq and swizzle_irq to default functions PCI: Move DT resource setup into devm_pci_alloc_host_bridge() PCI: rcar-gen2: Convert to use modern host bridge probe functions PCI: Remove dev_err() when handing an error from platform_get_irq() MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe misc: pci_endpoint_test: Add J721E in pci_device_id table PCI: j721e: Add TI J721E PCIe driver PCI: switchtec: Add missing __iomem tag to fix sparse warnings PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings PCI: rpadlpar: Make functions static PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs PCI: Release IVRS table in AMD ACS quirk PCI: Announce device after early fixups PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken PCI: Remove unused pci_lost_interrupt() dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC ...
2020-08-06drm/ttm: rename ttm_mem_reg to ttm_resource.Dave Airlie2-8/+8
This name better reflects what the object does. I didn't rename all the pointers it seemed too messy. Signed-off-by: Dave Airlie <airlied@redhat.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-60-airlied@gmail.com
2020-08-06drm/ttm: rename ttm_mem_type_manager -> ttm_resource_manager.Dave Airlie1-2/+2
This name makes a lot more sense, since these are about managing driver resources rather than just memory ranges. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-59-airlied@gmail.com
2020-08-06drm/ttm: make ttm_range_man_init/takedown take type + argsDave Airlie1-8/+4
This makes it easier to move these to a driver allocated system Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-47-airlied@gmail.com
2020-08-06drm/qxl/ttm: use wrapper to access memory managerDave Airlie1-5/+5
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-41-airlied@gmail.com
2020-08-06drm/qxl/ttm: use new takedown pathDave Airlie1-2/+2
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-33-airlied@gmail.com
2020-08-06drm/qxl/ttm: use new init path for managerDave Airlie1-2/+1
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-18-airlied@gmail.com
2020-08-06drm/qxl/ttm: call ttm manager debug (v2)Dave Airlie1-6/+4
v2: use the new exported interface. This code was poking inside a struct and assuming it was a drm_mm at the start. Call the proper API. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-12-airlied@gmail.com