summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/omapdrm/dss
AgeCommit message (Collapse)AuthorFilesLines
2019-10-03Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard3-22/+7
We haven't backmerged for a while, let's start the -rc period by pulling rc1. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-03drm/omap: fix max fclk divider for omap36xxTomi Valkeinen1-1/+1
The OMAP36xx and AM/DM37x TRMs say that the maximum divider for DSS fclk (in CM_CLKSEL_DSS) is 32. Experimentation shows that this is not correct, and using divider of 32 breaks DSS with a flood or underflows and sync losts. Dividers up to 31 seem to work fine. There is another patch to the DT files to limit the divider correctly, but as the DSS driver also needs to know the maximum divider to be able to iteratively find good rates, we also need to do the fix in the DSS driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Adam Ford <aford173@gmail.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20191002122542.8449-1-tomi.valkeinen@ti.com Tested-by: Adam Ford <aford173@gmail.com> Reviewed-by: Jyri Sarha <jsarha@ti.com>
2019-09-19Merge tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2-16/+2
Pull drm updates from Dave Airlie: "This is the main pull request for 5.4-rc1 merge window. I don't think there is anything outstanding so next week should just be fixes, but we'll see if I missed anything. I landed some fixes earlier in the week but got delayed writing summary and sending it out, due to a mix of sick kid and jetlag! There are some fixes pending, but I'd rather get the main merge out of the way instead of delaying it longer. It's also pretty large in commit count and new amd header file size. The largest thing is four new amdgpu products (navi12/14, arcturus and renoir APU support). Otherwise it's pretty much lots of work across the board, i915 has started landing tigerlake support, lots of icelake fixes and lots of locking reworking for future gpu support, lots of header file rework (drmP.h is nearly gone), some old legacy hacks (DRM_WAIT_ON) have been put into the places they are needed. uapi: - content protection type property for HDCP core: - rework include dependencies - lots of drmP.h removals - link rate calculation robustness fix - make fb helper map only when required - add connector->DDC adapter link - DRM_WAIT_ON removed - drop DRM_AUTH usage from drivers dma-buf: - reservation object fence helper dma-fence: - shrink dma_fence struct - merge signal functions - store timestamps in dma_fence - selftests ttm: - embed drm_get_object struct into ttm_buffer_object - release_notify callback bridges: - sii902x - audio graph card support - tc358767 - aux data handling rework - ti-snd64dsi86 - debugfs support, DSI mode flags support panels: - Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe Himax8279d, Sharp LD-D5116Z01B - TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1 i915: - Initial tigerlake platform support - Locking simplification work, general all over refactoring. - Selftests - HDCP debug info improvements - DSI properties - Icelake display PLL fixes, colorspace fixes, bandwidth fixes, DSI suspend/resume - GuC fixes - Perf fixes - ElkhartLake enablement - DP MST fixes - GVT - command parser enhancements amdgpu: - add wipe memory on release flag for buffer creation - Navi12/14 support (may be marked experimental) - Arcturus support - Renoir APU support - mclk DPM for Navi - DC display fixes - Raven scatter/gather support - RAS support for GFX - Navi12 + Arcturus power features - GPU reset for Picasso - smu11 i2c controller support amdkfd: - navi12/14 support - Arcturus support radeon: - kexec fix nouveau: - improved display color management - detect lack of GPU power cables vmwgfx: - evicition priority support - remove unused security feature msm: - msm8998 display support - better async commit support for cursor updates etnaviv: - per-process address space support - performance counter fixes - softpin support mcde: - DCS transfers fix exynos: - drmP.h cleanup lima: - reduce logging kirin: - misc clenaups komeda: - dual-link support - DT memory regions hisilicon: - misc fixes imx: - IPUv3 image converter fixes - 32-bit RGB V4L2 pixel format support ingenic: - more support for panel related cases mgag200: - cursor support fix panfrost: - export GPU features register to userspace - gpu heap allocations - per-fd address space support pl111: - CLD pads wiring support removed from DT rockchip: - rework to use DRM PSR helpers - fix bug in VOP_WIN_GET macro - DSI DT binding rework sun4i: - improve support for color encoding and range - DDC enabled GPIO tinydrm: - rework SPI support - improve MIPI-DBI support - moved to drm/tiny vkms: - rework CRC tracking dw-hdmi: - get_eld and i2s improvements gm12u320: - misc fixes meson: - global code cleanup - vpu feature detect omap: - alpha/pixel blend mode properties rcar-du: - misc fixes" * tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm: (2112 commits) drm/nouveau/bar/gm20b: Avoid BAR1 teardown during init drm/nouveau: Fix ordering between TTM and GEM release drm/nouveau/prime: Extend DMA reservation object lock drm/nouveau: Fix fallout from reservation object rework drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors drm/i915: Use NOEVICT for first pass on attemping to pin a GGTT mmap drm/i915: to make vgpu ppgtt notificaiton as atomic operation drm/i915: Flush the existing fence before GGTT read/write drm/i915: Hold irq-off for the entire fake lock period drm/i915/gvt: update RING_START reg of vGPU when the context is submitted to i915 drm/i915/gvt: update vgpu workload head pointer correctly drm/mcde: Fix DSI transfers drm/msm: Use the correct dma_sync calls harder drm/msm: remove unlikely() from WARN_ON() conditions drm/msm/dsi: Fix return value check for clk_get_parent drm/msm: add atomic traces drm/msm/dpu: async commit support drm/msm: async commit support drm/msm: split power control from prepare/complete_commit drm/msm: add kms->flush_commit() ...
2019-09-19Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-6/+5
Pull dma-mapping updates from Christoph Hellwig: - add dma-mapping and block layer helpers to take care of IOMMU merging for mmc plus subsequent fixups (Yoshihiro Shimoda) - rework handling of the pgprot bits for remapping (me) - take care of the dma direct infrastructure for swiotlb-xen (me) - improve the dma noncoherent remapping infrastructure (me) - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me) - cleanup mmaping of coherent DMA allocations (me) - various misc cleanups (Andy Shevchenko, me) * tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits) mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE mmc: queue: Fix bigger segments usage arm64: use asm-generic/dma-mapping.h swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page swiotlb-xen: simplify cache maintainance swiotlb-xen: use the same foreign page check everywhere swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable xen: remove the exports for xen_{create,destroy}_contiguous_region xen/arm: remove xen_dma_ops xen/arm: simplify dma_cache_maint xen/arm: use dev_is_dma_coherent xen/arm: consolidate page-coherent.h xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance arm: remove wrappers for the generic dma remap helpers dma-mapping: introduce a dma_common_find_pages helper dma-mapping: always use VM_DMA_COHERENT for generic DMA remap vmalloc: lift the arm flag for coherent mappings to common code dma-mapping: provide a better default ->get_required_mask dma-mapping: remove the dma_declare_coherent_memory export remoteproc: don't allow modular build ...
2019-09-04dma-mapping: remove dma_{alloc,free,mmap}_writecombineChristoph Hellwig1-6/+5
We can already use DMA_ATTR_WRITE_COMBINE or the _wc prefixed version, so remove the third way of doing things. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-08-28drm: Stop including drm_bridge.h from drm_crtc.hBoris Brezillon1-0/+1
We are about to add a drm_bridge_state that inherits from drm_private_state which is defined in drm_atomic.h. Problem is, drm_atomic.h includes drm_crtc.h which in turn includes drm_bridge.h, leading to "drm_private_state has incomplete type" error. Let's force all users of the drm_bridge API to explicitly include drm_bridge.h. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190826152649.13820-2-boris.brezillon@collabora.com
2019-08-23drm/omap: Fix port lookup for SDI outputLaurent Pinchart1-1/+3
When refactoring port lookup for DSS outputs, commit d17eb4537a7e ("drm/omap: Factor out common init/cleanup code for output devices") incorrectly hardcoded usage of DT port 0. This breaks operation for SDI (which uses the DT port 1) and DPI outputs other than DPI0 (which are not used in mainline DT sources). Fix this by using the port number from the output omap_dss_device of_ports field. Fixes: d17eb4537a7e ("drm/omap: Factor out common init/cleanup code for output devices") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821183226.13784-1-laurent.pinchart@ideasonboard.com Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
2019-08-23omapdrm: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-9/+2
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: zhong jiang <zhongjiang@huawei.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613115749.GC26335@kroah.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190704023557.4551-1-huangfq.daxian@gmail.com
2019-08-16drm/omap: displays: Remove unused panel driversLaurent Pinchart1-7/+0
drm_panel-based drivers for the ACX565AKM, LB035Q02, LS037V7DW01, NL8048HL11, TD028TTEC1 and TD043MTEA1 are available, remove the omapdrm-specific drivers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190816122228.9475-3-laurent.pinchart@ideasonboard.com
2019-07-15Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+1
Pull drm updates from Dave Airlie: "The biggest thing in this is the AMD Navi GPU support, this again contains a bunch of header files that are large. These are the new AMD RX5700 GPUs that just recently became available. New drivers: - ST-Ericsson MCDE driver - Ingenic JZ47xx SoC UAPI change: - HDR source metadata property Core: - HDR inforframes and EDID parsing - drm hdmi infoframe unpacking - remove prime sg_table caching into dma-buf - New gem vram helpers to reduce driver code - Lots of drmP.h removal - reservation fencing fix - documentation updates - drm_fb_helper_connector removed - mode name command handler rewrite fbcon: - Remove the fbcon notifiers ttm: - forward progress fixes dma-buf: - make mmap call optional - debugfs refcount fixes - dma-fence free with pending signals fix - each dma-buf gets an inode Panels: - Lots of additional panel bindings amdgpu: - initial navi10 support - avoid hw reset - HDR metadata support - new thermal sensors for vega asics - RAS fixes - use HMM rather than MMU notifier - xgmi topology via kfd - SR-IOV fixes - driver reload fixes - DC use a core bpc attribute - Aux fixes for DC - Bandwidth calc updates for DC - Clock handling refactor - kfd VEGAM support vmwgfx: - Coherent memory support changes i915: - HDR Support - HDMI i2c link - Icelake multi-segmented gamma support - GuC firmware update - Mule Creek Canyon PCH support for EHL - EHL platform updtes - move i915.alpha_support to i915.force_probe - runtime PM refactoring - VBT parsing refactoring - DSI fixes - struct mutex dependency reduction - GEM code reorg mali-dp: - Komeda driver features msm: - dsi vs EPROBE_DEFER fixes - msm8998 snapdragon 835 support - a540 gpu support - mdp5 and dpu interconnect support exynos: - drmP.h removal tegra: - misc fixes tda998x: - audio support improvements - pixel repeated mode support - quantisation range handling corrections - HDMI vendor info fix armada: - interlace support fix - overlay/video plane register handling refactor - add gamma support rockchip: - RX3328 support panfrost: - expose perf counters via hidden ioctls vkms: - enumerate CRC sources list ast: - rework BO handling mgag200: - rework BO handling dw-hdmi: - suspend/resume support rcar-du: - R8A774A1 Soc Support - LVDS dual-link mode support - Additional formats - Misc fixes omapdrm: - DSI command mode display support stm - fb modifier support - runtime PM support sun4i: - use vmap ops vc4: - binner bo binding rework v3d: - compute shader support - resync/sync fixes - job management refactoring lima: - NULL pointer in irq handler fix - scheduler default timeout virtio: - fence seqno support - trace events bochs: - misc fixes tc458767: - IRQ/HDP handling sii902x: - HDMI audio support atmel-hlcdc: - misc fixes meson: - zpos support" * tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits) Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next" Revert "mm: adjust apply_to_pfn_range interface for dropped token." mm: adjust apply_to_pfn_range interface for dropped token. drm/amdgpu/navi10: add uclk activity sensor drm/amdgpu: properly guard the generic discovery code drm/amdgpu: add missing documentation on new module parameters drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback drm/amd/display: avoid 64-bit division drm/amdgpu/psp11: simplify the ucode register logic drm/amdgpu: properly guard DC support in navi code drm/amd/powerplay: vega20: fix uninitialized variable use drm/amd/display: dcn20: include linux/delay.h amdgpu: make pmu support optional drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq drm/amd/powerplay: Use memset to initialize metrics structs drm/amdgpu/mes10.1: Fix header guard drm/amd/powerplay: add temperature sensor support for navi10 drm/amdgpu: fix scheduler timeout calc drm/amdgpu: Prepare for hmm_range_register API change (v2) ...
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner3-12/+3
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner22-264/+22
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19Merge v5.2-rc5 into drm-nextDaniel Vetter3-27/+3
Maarten needs -rc4 backmerged so he can pull in the fbcon notifier removal topic branch into drm-misc-next. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-06-10drm/omap: Make sure device_id tables are NULL terminatedThomas Meyer1-0/+1
Make sure (of/i2c/platform)_device_id tables are NULL terminated. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner3-27/+3
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-15BackMerge v5.1-rc5 into drm-nextDave Airlie2-8/+20
Need rc5 for udl fix to add udl cleanups on top. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-03-27drm/omap: hdmi4_cec: Fix CEC clock handling for PMTony Lindgren1-7/+19
If CONFIG_OMAP4_DSS_HDMI_CEC is enabled in .config, deeper SoC idle states are blocked because the CEC clock gets always enabled on init. Let's fix the issue by moving the CEC clock handling to happen later in hdmi_cec_adap_enable() as suggested by Hans Verkuil <hverkuil@xs4all.nl>. This way the CEC clock gets only enabled when needed. This can be tested by doing cec-ctl --playback to enable the CEC, and doing cec-ctl --clear to disable it. Let's also fix the typo for "divider" in the comments while at it. Fixes: 8d7f934df8d8 ("omapdrm: hdmi4_cec: add OMAP4 HDMI CEC support") Suggested-by: Hans Verkuil <hverkuil@xs4all.nl> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Jyri Sarha <jsarha@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190326151438.32414-1-tony@atomide.com
2019-03-27drm/omap: fix typoMatteo Croce1-1/+1
Fix spelling mistake: "lenght" -> "length" Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190107130934.9997-1-mcroce@redhat.com
2019-03-18drm/omap: dsi: Fix PM for display blank with paired dss_pll callsTony Lindgren1-29/+31
Currently dsi_display_init_dsi() calls dss_pll_enable() but it is not paired with dss_pll_disable() in dsi_display_uninit_dsi(). This leaves the DSS clocks enabled when the display is blanked wasting about extra 5mW of power while idle. The clock that is left on by not calling dss_pll_disable() is DSS_CLKCTRL bit 10 OPTFCLKEN_SYS_CLK that is the source clock for DSI PLL. We can fix this issue by by making the current dsi_pll_uninit() into dsi_pll_disable(). This way we can just call dss_pll_disable() from dsi_display_uninit_dsi() and the code becomes a bit easier to follow. However, we need to also consider that DSI PLL can be muxed for DVI too as pointed out by Tomi Valkeinen <tomi.valkeinen@ti.com>. In the DVI case, we want to unconditionally disable the clocks. To get around this issue, we separate out the DSI lane handling from dsi_pll_enable() and dsi_pll_disable() as suggested by Tomi in an earlier experimental patch. So we must only toggle the DSI regulator based on the vdds_dsi_enabled flag from dsi_display_init_dsi() and dsi_display_uninit_dsi(). We need to make these two changes together to avoid breaking things for DVI when fixing the DSI clock handling. And this all causes a slight renumbering of the error path for dsi_display_init_dsi(). Suggested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Remove panel-dpi driverLaurent Pinchart1-1/+0
Panels are now supported through the drm_panel infrastructure, remove the omapdrm-specific driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Remove TFP410 and DVI connector driversLaurent Pinchart1-2/+0
Those components are supported by the drm_bridge infrastructure, remove the omapdrm-specific driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Whitelist DT nodes to fixup with omapdss, prefixLaurent Pinchart2-8/+33
The omapdss driver patches DT at runtime to prepend an "omapdss," prefix to the compatible string of all encoders, panels and connectors. This mechanism ensures they get bound to the omapdss-specific drivers instead of generic drivers. Now that we have drm_bridge support in omapdrm, we need to selectively disable this mechanism. Add a whitelist of compatible strings to patch, and fill it with all the devices we support. They will be removed one by one once corresponding drm_bridge drivers become available and get successfully tested with omapdrm. The omapdss components load check code is updated accordingly to ignore devices managed by external bridge drivers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Add support for drm_panelLaurent Pinchart3-6/+14
Hook up drm_panel support in the omapdrm driver. The change is relatively simply as the way has been paved by drm_bridge support already. In addition to looking up, attaching to and detaching from the panel, we only need to add panel support in the connector .get_modes() handler, take connector bus flags (set by the panel) into account, and enable/disable the panel in the encoder enable/disable operations handlers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Add support for drm_bridgeLaurent Pinchart3-9/+40
Hook up drm_bridge support in the omapdrm driver. Despite the recent extensive preparation work, this is a rather intrusive change, as the management of outputs needs to be adapted through the driver to handle both omap_dss_device and drm_bridge. Connector creation is skipped when using a drm_bridge, as the bridge creates the connector internally. This creates issues with systems that split connector operations (such as modes retrieval and hot-plug detection) across different bridges. These systems can't be supported using drm_bridge for now (their support through the omap_dss_device infrastructure is not affected), this will be fixed in subsequent changes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flagsLaurent Pinchart2-4/+4
The DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and DRM_BUS_FLAG_SYNC_(POS|NEG)EDGE flags are deprecated in favour of the new DRM_BUS_FLAG_PIXDATA_(DRIVE|SAMPLE)_(POS|NEG)EDGE and new DRM_BUS_FLAG_SYNC_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags. Replace them through the code. This effectively changes the value of the .sampling_edge bridge timings field in the dumb-vga-dac driver. This is safe to do as no driver consumes these values yet. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Merge omap_dss_device type and output_type fieldsLaurent Pinchart9-13/+17
The omap_dss_device type and output_type fields differ mostly for historical reasons. The output_type field is required for all devices but the display at the end of the pipeline, and must be set to OMAP_DISPLAY_TYPE_NONE for the latter. The type field is required for all devices but the internal encoder, for which it is ignored. The only reason why the output_type field must be set to OMAP_DISPLAY_TYPE_NONE for the display at the end of the pipeline is to identify omap_dss_device instances corresponding to displays. This is not documented and confusing. Clean the code by adding a new display field to the omap_dss_device structure to identify displays, and merge the type and output_type fields. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Simplify OF lookup of DSS devicesLaurent Pinchart3-58/+10
Now that the direction of OF graph walk has been reversed, there's no need to lookup devices by port as we have no sink device connected through multiple sink ports. Simplify OF lookup of the DSS devices to look them up by node only. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Store pixel clock instead of full mode in DPI and SDI encodersLaurent Pinchart2-8/+7
The DPI and SDI encoders store the full videomode upon mode set, to only use the value of the pixel clock when enabling the encoder. This wastes memory. Store the pixel clock value only. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: venc: Use drm_display_mode nativelyLaurent Pinchart1-46/+44
Replace internal usage of struct videomode with struct drm_display_mode in order to avoid converting needlessly between the data structures. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Pass drm_display_mode to .check_timings() and .set_timings()Laurent Pinchart6-38/+39
The omap_dss_device .check_timings() and .set_timings() operations operate on struct videomode, while the DRM API operates on struct drm_display_mode. This forces conversion from to videomode in the callers. While that's not a problem per se, it creates a difference with the drm_bridge API. Replace the videomode parameter to the .check_timings() and .set_timings() operations with a drm_display_mode. This pushed the conversion to videomode down to the DSS devices in some cases. If needed they will be converted to operate on drm_display_mode natively. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: venc: Simplify mode setting by caching configurationLaurent Pinchart1-34/+34
The mode setting handler of the VENC stores the video mode internally, to then convert it to a configuration when programming the hardware. The stored mode is otherwise unused. Cache the configuration directly instead. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Remove src field from omap_dss_device structureLaurent Pinchart2-14/+1
The field is only used to check whether the device is connected, and we can do so by checking the dss field instead. Remove the src field. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Move display alias ID to omap_drm_pipelineLaurent Pinchart2-4/+0
The DT bindings for the OMAP DSS allow assigning numerical IDs to display outputs through display entries in the alias node. The driver uses this information to sort pipelines according to the order specified in DT, making it possible for a system to give a priority order to outputs. Retrieval of the alias ID is done when initializing display dss devices. That code will be removed when moving to drm_bridge and drm_panel. Move retrieval of the alias ID to display pipeline connection time and store it in the pipeline structure instead to keep the feature. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: venc: List both PAL and NTSC modesLaurent Pinchart1-6/+19
The TV encoder supports both PAL and NTSC modes, but when queried for the list of modes it supports, only the currently selected mode is reported. Fix it and report the two modes unconditionally. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Add a dss device operation flag for .get_modes()Laurent Pinchart2-1/+4
Instead of manually iterating over the dss devices in the pipeline to find the first one that implements the .get_modes() operation, add a new operation flag for .get_modes() and use the omap_connector_find_device() helper function to locate the right dss device. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Merge display .get_modes() and .get_size() operationsLaurent Pinchart1-3/+0
Now that the .get_modes() operations takes a drm_connector and fills it with modes, it becomes easy to fill display information in the same operation without requiring a separate .get_size() opearation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Expose DRM modes instead of timings in display devicesLaurent Pinchart3-6/+36
omap_dss_device operations expose fixed video timings through a .get_timings() operation that return a single timing for the device. To prepare for the move to drm_bridge, modify the API to instead add DRM modes directly to the connector. As this puts more burden on display devices, we also create a helper function for panels to add a single DRM mode from the panel video timings. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Factor out common init/cleanup code for output devicesLaurent Pinchart8-87/+36
All the internal encoders share common init and cleanup code. Factor it out to separate functions. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Remove omap_dss_device dst fieldLaurent Pinchart2-5/+2
The field is only used in a safety check during device connection/disconnection, where the src field can be easily used instead. Remove it and use src. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Reverse direction of the DSS device enable/disable operationsLaurent Pinchart9-66/+85
The omapdrm and omapdss drivers are architectured based on display pipelines made of multiple components handled from sink (display) to source (DSS output). This is incompatible with the DRM bridge and panel APIs that handle components from source to sink. Reconcile the omapdrm and omapdss drivers with the DRM bridge and panel model by reversing the direction of the DSS device .enable() and .disable() operations. This completes the move to the DRM bridge model, with the notable exception of the DSI pipelines that will require more work. We also adapt the omapdss shutdown handler dss_shutdown() to shut down all active pipelines starting from the pipeline output device instead of the display device. As a consequence the for_each_dss_display() macro isn't used and can be removed, and the omapdss_device_get_next() function underlying the macro can be simplified to search for output devices only. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Remove connection checks from display .enable() and .remove()Laurent Pinchart2-5/+5
The displays (connectors, panels and encoders) return an error from their .enable() handler when the dss device is not connected. They also disconnect the dss device explicitly from their .remove() handler if it is still connected. Those safety checks are not needed: - The .enable() handler is called from code paths that access the dss devices chain from the display device, which is set to NULL when the device isn't connected. - The .remove() handler can only be called when unloading the module as the driver has the suppress_bind_attrs attribute set, and a reference to the module is taken when constructing the dss devices chain, so the module can only be unloaded when the dss device is disconnected. Remove the safety checks. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Remove connection checks from internal encoders .enable()Laurent Pinchart7-98/+7
The internal encoders return an error from their .enable() handler when their are not connected to a dss manager. As the flag used is set and cleared in the connect and disconnect handlers, this effectively checks whether the omap_dss_device is connected. The .enable() handler is called from code paths that access the dss devices chain from the display device, which is set to NULL when the device isn't connected, making it impossible to access the device in that case. The safety check is thus not needed, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Use atomic suspend/resume helpersLaurent Pinchart1-3/+0
Instead of rolling out custom suspend/resume implementations based on state information stored in the driver's data structures, use the atomic suspend/resume helpers that rely on a DRM atomic state object. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: venc: Remove wss_data field from venc_device structureLaurent Pinchart1-10/+1
The venc_device structure wss_data field is set to 0 and never otherwise modified, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm/omap: Remove unused kobj field from struct omap_dss_deviceLaurent Pinchart1-2/+0
The kobj field from struct omap_dss_device is not used. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-02-06drm/omap: dsi: Hack-fix DSI bus flagsTomi Valkeinen1-0/+11
Since commit b4935e3a3cfa ("drm/omap: Store bus flags in the omap_dss_device structure") video mode flags are managed by the omapdss (and later omapdrm) core based on bus flags stored in omap_dss_device. This works fine for all devices whose video modes are set by the omapdss and omapdrm core, but breaks DSI operation as the DSI still uses legacy code paths and sets the DISPC timings manually. To fix the problem properly we should move the DSI encoder to the new encoder model. This will however require a considerable amount of work. Restore DSI operation by adding back video mode flags handling in the DSI encoder driver as a hack in the meantime. Fixes: b4935e3a3cfa ("drm/omap: Store bus flags in the omap_dss_device structure") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-5-laurent.pinchart@ideasonboard.com
2019-02-06drm/omap: dsi: Fix OF platform depopulateTomi Valkeinen1-2/+2
Commit edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe") moved the of_platform_populate() call from dsi_bind() to dsi_probe(), but failed to move the corresponding of_platform_depopulate() from dsi_unbind() to dsi_remove(). This results in OF child devices being potentially removed multiple times. Fix it by placing the of_platform_depopulate() call where it belongs. Fixes: edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-4-laurent.pinchart@ideasonboard.com
2019-02-06drm/omap: dsi: Fix crash in DSI debug dumpsTomi Valkeinen1-6/+6
Reading any of the DSI debugfs files results in a crash, as wrong pointer is passed to the dump functions, and the dump functions use a wrong pointer. This patch fixes DSI debug dumps. Fixes: f3ed97f9ae7d ("drm/omap: dsi: Simplify debugfs implementation") Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-3-laurent.pinchart@ideasonboard.com
2018-12-03drm/omap: populate DSI platform bus earlierSebastian Reichel1-10/+10
After the changes from 4.20 the DSI encoder tries to find the attached panel before populating the DSI bus. If the panel is not found -EPROBE_DEFER is returned, so the DSI bus is never populated and the panel never added. Fix this by populating the DSI bus before searching for the video sink in dsi_init_output(). Fixes: 27d624527d992 ("drm/omap: dss: Acquire next dssdev at probe time") Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181121160916.22017-3-sebastian.reichel@collabora.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-08 11:20:03 +0000